RADIUS Attributes for IEEE 802.16 Privacy Key Management Version 1 (PKMv1) Protocol Support
draft-zorn-radius-pkmv1-08

Abstract

This document defines a set of RADIUS Attributes which are designed to provide RADIUS support for IEEE 802.16 Privacy Key Management Version 1.

Status of this Memo

This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt.

The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html.

This Internet-Draft will expire on August 13, 2010.

Copyright Notice

Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the BSD License.

This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English.

Table of Contents

1.  Introduction
2.  Terminology
    2.1.  Requirements Language
    2.2.  Acronyms
3.  Attributes
    3.1.  PKM-SS-Cert
    3.2.  PKM-CA-Cert
    3.3.  PKM-Config-Settings
    3.4.  PKM-Cryptosuite-List
    3.5.  PKM-SAID
    3.6.  PKM-SA-Descriptor
    3.7.  PKM-AUTH-Key
4.  Table of Attributes
5.  Diameter Considerations
6.  IANA Considerations
7.  Security Considerations
8.  References
    8.1.  Normative References
    8.2.  Informative References
§  Author's Address

1.  Introduction

Privacy Key Management Version 1 (PKMv1) [IEEE.802.16‑2004] (Institute of Electrical and Electronics Engineers, “IEEE Standard for Local and metropolitan area networks, Part 16: Air Interface for Fixed Broadband Wireless Access Systems,” October 2004.) is a public-key based authentication and key establishment protocol typically used in fixed wireless broadband network deployments. The protocol utilizes X.509 v3 certificates [RFC2459] (Housley, R., Ford, W., Polk, T., and D. Solo, “Internet X.509 Public Key Infrastructure Certificate and CRL Profile,” January 1999.), RSA encryption [RFC2437] (Kaliski, B. and J. Staddon, “PKCS #1: RSA Cryptography Specifications Version 2.0,” October 1998.) and a variety of secret key cryptographic methods to allow an 802.16 Base Station (BS) to authenticate a Subscriber Station (SS) and perform key establishment and maintenance between a SS and BS.

This document defines a set of RADIUS Attributes which are designed to provide support for PKMv1. The target audience for this document consists of those developers implementing RADIUS support for PKMv1; therefore, familiarity with both RADIUS [RFC2865] (Rigney, C., Willens, S., Rubens, A., and W. Simpson, “Remote Authentication Dial In User Service (RADIUS),” June 2000.) and the IEEE 802.16-2004 standard is assumed.

Discussion of this draft may be directed to the author.

2.  Terminology

2.1.  Requirements Language

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.) [RFC2119].

2.2.  Acronyms

CA

Certification Authority; a trusted party issuing and signing X.509 certificates.

For further information on the following terms, please see Section 7 of [IEEE.802.16‑2004] (Institute of Electrical and Electronics Engineers, “IEEE Standard for Local and metropolitan area networks, Part 16: Air Interface for Fixed Broadband Wireless Access Systems,” October 2004.).

SA

Security Association

SAID

Security Association Identifier

TEK

Traffic Encryption Key

3.  Attributes

The following subsections describe the Attributes defined by this document. This specification concerns the following values:

<TBD1> PKM-SS-Cert

<TBD2> PKM-CA-Cert

<TBD3> PKM-Config-Settings

<TBD4> PKM-Cryptosuite-List

<TBD5> PKM-SAID

<TBD6> PKM-SA-Descriptor

<TBD7> PKM-Auth-Key

3.1.  PKM-SS-Cert

Description

The PKM-SS-Cert Attribute is variable length and MAY be transmitted in the Access-Request message. The Value field is of type String and contains the X.509 certificate [RFC2459] (Housley, R., Ford, W., Polk, T., and D. Solo, “Internet X.509 Public Key Infrastructure Certificate and CRL Profile,” January 1999.) binding a public key to the identifier of the Subscriber Station.

It is possible that the size of the SS certificate may exceed the maximum size of a RADIUS attribute; in this case, the client MUST encapsulate the certificate in the Value fields of two or more instances of the PKM-SS-Cert Attribute, each (except possibly the last) having a length of 255 octets. These multiple PKM-SS-Cert Attributes MUST appear consecutively and in order within the packet. Upon receipt, the RADIUS server MUST recover the original certificate by concatenating the Value fields of the received PKM-SS-Cert Attributes in order.

A summary of the PKM-SS-Cert Attribute format is shown below. The fields are transmitted from left to right.

                       1                   2
   0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |    Type       |      Len      |    Value...
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Type

<TBD1> for PKM-SS-Cert

Len

> 2

Value

The Value field is variable length and contains a (possibly complete) portion of an X.509 certificate.

3.2.  PKM-CA-Cert

Description

The PKM-CA-Cert Attribute is variable length and MAY be transmitted in the Access-Request message. The Value field is of type String and contains the X.509 certificate [RFC2459] (Housley, R., Ford, W., Polk, T., and D. Solo, “Internet X.509 Public Key Infrastructure Certificate and CRL Profile,” January 1999.) used by the CA to sign the SS certificate carried in the PKM-SS-Cert attribute (Section 3.1 (PKM-SS-Cert)) in the same message.

It is possible that the size of the CA certificate may exceed the maximum size of a RADIUS attribute; in this case, the client MUST encapsulate the certificate in the Value fields of two or more instances of the PKM-CA-Cert Attribute, each (except possibly the last) having a length of 255 octets. These multiple PKM-CA-Cert Attributes MUST appear consecutively and in order within the packet. Upon receipt, the RADIUS server MUST recover the original certificate by concatenating the Value fields of the received PKM- CA-Cert Attributes in order.

A summary of the PKM-CA-Cert Attribute format is shown below. The fields are transmitted from left to right.

                       1                   2
   0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |    Type       |      Len      |    Value...
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Type

<TBD2> for PKM-CA-Cert

Len

> 2

Value

The Value field is variable length and contains a (possibly complete) portion of an X.509 certificate.

3.3.  PKM-Config-Settings

Description

The PKM-Config-Settings Attribute is of type "string" [RFC2865] (Rigney, C., Willens, S., Rubens, A., and W. Simpson, “Remote Authentication Dial In User Service (RADIUS),” June 2000.). It is 30 octets in length and consists of seven independent fields, each of which is conceptually an unsigned integer. Each of the fields contains a timeout value and corresponds to a Type-Length-Value (TLV) tuple encapsulated in the IEEE 802.16 "PKM configuration settings" attribute; for details on the contents of each field, see Section 11.9.19 of [IEEE.802.16‑2004] (Institute of Electrical and Electronics Engineers, “IEEE Standard for Local and metropolitan area networks, Part 16: Air Interface for Fixed Broadband Wireless Access Systems,” October 2004.) One instance of the PKM-Config-Settings Attribute MAY be included in the Access-Accept message.

A summary of the PKM-Config-Settings Attribute format is shown below. The fields are transmitted from left to right.

                     1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|    Type       |      Len      |       Auth Wait Timeout
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    Auth Wait Timeout (cont.)   |      Reauth Wait Timeout
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   Reauth Wait Timeout (cont.)  |        Auth Grace Time
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     Auth Grace Time (cont.)    |        Op Wait Timeout
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     Op Wait Timeout (cont.)    |       Rekey Wait Timeout
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   Rekey Wait Timeout (cont.)   |         TEK Grace Time
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     TEK Grace Time (cont.)     |     Auth Rej Wait Timeout
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  Auth Rej Wait Timeout (cont.) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Type

<TBD3> for PKM-Config-Settings

Len

30

Auth Wait Timeout

The Auth Wait Timeout field is 4 octets in length and corresponds to the "Authorize wait timeout" field of the 802.16 "PKM configuration settings" attribute

Reauth Wait Timeout

The Reauth Wait Timeout field is 4 octets in length and corresponds to the "Reauthorize wait timeout" field of the 802.16 "PKM configuration settings" attribute

Auth Grace Time

The Auth Grace Time field is 4 octets in length and corresponds to the "Authorize grace time" field of the 802.16 "PKM configuration settings" attribute

Op Wait Timeout

The Op Wait Timeout field is 4 octets in length and corresponds to the "Operational wait timeout" field of the 802.16 "PKM configuration settings" attribute

Rekey Wait Timeout

The Rekey Wait Timeout field is 4 octets in length and corresponds to the "Rekey wait timeout" field of the 802.16 "PKM configuration settings" attribute

TEK Grace Time

The TEK Grace Time field is 4 octets in length and corresponds to the "TEK grace time" field of the 802.16 "PKM configuration settings" attribute

Auth Rej Wait Timeout

The Auth Rej Wait Timeout field is 4 octets in length and corresponds to the "Authorize reject wait timeout" field of the 802.16 "PKM configuration settings" attribute

3.4.  PKM-Cryptosuite-List

Description

The PKM-Cryptosuite-List Attribute is of type "string" [RFC2865] and is variable length; it corresponds roughly to the "Cryptographic-Suite-List" 802.16 attribute (see Section 11.19.15 of [IEEE.802.16‑2004] (Institute of Electrical and Electronics Engineers, “IEEE Standard for Local and metropolitan area networks, Part 16: Air Interface for Fixed Broadband Wireless Access Systems,” October 2004.), the difference being that the RADIUS Attribute contains only the list of 3-octet cryptographic suite identifiers, omitting the IEEE Type and Length fields.

The PKM-Cryptosuite-List Attribute MAY be present in an Access-Request message. Any message in which the PKM-Cryptosuite-List Attribute is present MUST also contain an instance of the Message-Authenticator Attribute [RFC3579] (Aboba, B. and P. Calhoun, “RADIUS (Remote Authentication Dial In User Service) Support For Extensible Authentication Protocol (EAP),” September 2003.).

Implementation Note

The PKM-Cryptosuite-List Attribute is used as a building block to create the 802.16 "Security-Capabilities" attribute ([IEEE.802.16‑2004] (Institute of Electrical and Electronics Engineers, “IEEE Standard for Local and metropolitan area networks, Part 16: Air Interface for Fixed Broadband Wireless Access Systems,” October 2004.), Section 11.9.13); since this document only pertains to PKM version 1, the "Version" sub-attribute in that structure MUST be set to 0x01 when the RADIUS client constructs it.

A summary of the PKM-Cryptosuite-List Attribute format is shown below. The fields are transmitted from left to right.

                     1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|      Type     |      Len      |          Value...
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Type

<TBD4> for PKM-Cryptosuite-List

Len

2 + 3n < 39, where 'n' is the number of cryptosuite identifiers in the list.

Value

The Value field is variable length and contains a sequence of one or more cryptosuite identifiers, each of which is 3 octets in length and corresponds to the Value field of an IEEE 802.16 Cryptographic-Suite attribute

3.5.  PKM-SAID

Description

The PKM-SAID Attribute is of type "string" [RFC2865] (Rigney, C., Willens, S., Rubens, A., and W. Simpson, “Remote Authentication Dial In User Service (RADIUS),” June 2000.). It is 4 octets in length and contains a PKM Security Association Identifier ([IEEE.802.16‑2004] (Institute of Electrical and Electronics Engineers, “IEEE Standard for Local and metropolitan area networks, Part 16: Air Interface for Fixed Broadband Wireless Access Systems,” October 2004.), Section 11.9.7). It MAY be included in an Access-Request message.

A summary of the PKM-SAID Attribute format is shown below. The fields are transmitted from left to right.

                     1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|      Type     |      Len      |            SAID               |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Type

<TBD5> for PKM-SAID

Len

4

SAID

The SAID field is two octets in length and corresponds to the Value field of the 802.16 PKM SAID attribute

3.6.  PKM-SA-Descriptor

Description

The PKM-SA-Descriptor Attribute is of type "string" and is 8 octets in length. It contains three fields, described below, which together specify the characteristics of a PKM security association. One or more instances of the PKM-SA-Descriptor Attribute MAY occur in an Access-Accept message.

A summary of the PKM-SA-Descriptor Attribute format is shown below. The fields are transmitted from left to right.

                     1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|      Type     |      Len      |            SAID               |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|    SA Type    |                Cryptosuite                    |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Type

<TBD6> for PKM-SA-Descriptor

Len

8

SAID

The SAID field is two octets in length and contains a PKM SAID (Section 3.5 (PKM-SAID)).

SA Type

The SA Type field is one octet in length. The contents correspond to those of the Value field of an IEEE 802.16 SA-Type attribute.

Cryptosuite

The Cryptosuite field is 3 octets in length. The contents correspond to those of the Value field of an IEEE 802.16 Cryptographic-Suite attribute.

3.7.  PKM-AUTH-Key

Description

The PKM-AUTH-Key Attribute is of type "string", 135 octets in length. It consists of 3 fields, described below, which together specify the characteristics of a PKM authorization key. The PKM- AUTH-Key Attribute MAY occur in an Access-Accept message. Any packet that contains an instance of the PKM-AUTH-Key Attribute MUST also contain an instance of the Message-Authenticator Attribute [RFC3579] (Aboba, B. and P. Calhoun, “RADIUS (Remote Authentication Dial In User Service) Support For Extensible Authentication Protocol (EAP),” September 2003.).

A summary of the PKM-AUTH-Key Attribute format is shown below. The fields are transmitted from left to right.

                     1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|      Type     |      Len      |           Lifetime
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
          Lifetime (cont.)      |    Sequence   |     Key...
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Type

<TBD7> for PKM-AUTH-Key

Len

135

Lifetime

The Lifetime field is 4 octets in length and represents the lifetime, in seconds, of the authorization key. For more information, see Section 11.9.4 of (Institute of Electrical and Electronics Engineers, “IEEE Standard for Local and metropolitan area networks, Part 16: Air Interface for Fixed Broadband Wireless Access Systems,” October 2004.) [IEEE.802.16‑2004].

Sequence

The Sequence field is one octet in length. The contents correspond to those of the Value field of an IEEE 802.16 Key- Sequence-Number attribute (see [IEEE.802.16‑2004] (Institute of Electrical and Electronics Engineers, “IEEE Standard for Local and metropolitan area networks, Part 16: Air Interface for Fixed Broadband Wireless Access Systems,” October 2004.), Section 11.9.5).

Key

The Key field is 128 octets in length. The contents correspond to those of the Value field of an IEEE 802.16 AUTH-Key attribute. The Key field MUST be encrypted under the public key from the Subscriber Station certificate (Section 3.1 (PKM-SS-Cert)) using RSA encryption [RFC2437] (Kaliski, B. and J. Staddon, “PKCS #1: RSA Cryptography Specifications Version 2.0,” October 1998.); see Section 7.5 of [IEEE.802.16‑2004] (Institute of Electrical and Electronics Engineers, “IEEE Standard for Local and metropolitan area networks, Part 16: Air Interface for Fixed Broadband Wireless Access Systems,” October 2004.) for further details.

4.  Table of Attributes

The following table provides a guide to which attributes may be found in which kinds of packets, and in what quantity.

  Request Accept Reject Challenge Acct-Req  #   Attribute
  0+      0      0      0         0        TBD1 PKM-SS-Cert [Note 1]
  0+      0      0      0         0        TBD2 PKM-CA-Cert [Note 2]
  0       0-1    0      0         0        TBD3 PKM-Config-Settings
  0-1     0      0      0         0        TBD4 PKM-Cryptosuite-List
  0-1     0      0      0         0        TBD5 PKM-SAID
  0       0+     0      0         0        TBD6 PKM-SA-Descriptor
  0       0-1    0      0         0        TBD7 PKM-Auth-Key

[Note 1]

No more than one Subscriber Station Certificate may be transferred in an Access-Request packet.

[Note 2]

No more than one CA Certificate may be transferred in an Access-Request packet.

The following table defines the meaning of the above table entries.

0   This attribute MUST NOT be present in packet
0+  Zero or more instances of this attribute MAY be present in packet
0-1 Zero or one instance of this attribute MAY be present in packet
1   Exactly one instance of this attribute MUST be present in packet

5.  Diameter Considerations

Since the Attributes defined in this document are allocated from the standard RADIUS type space (see Section 6 (IANA Considerations)), no special handling is required by Diameter nodes.

6.  IANA Considerations

Upon publication of this document as an RFC, IANA must assign numbers for the following Attributes:

<TBD1> PKM-SS-Cert

<TBD2> PKM-CA-Cert

<TBD3> PKM-Auth-Wait-Timeout

<TBD4> PKM-Cryptosuite-List

<TBD5> PKM-SAID

<TBD6> PKM-SA-Descriptor

<TBD7> PKM-Auth-Key

The Attribute numbers are to be allocated from the standard RADIUS Attribute type space according to the "IETF Review" policy [RFC5226] (Narten, T. and H. Alvestrand, “Guidelines for Writing an IANA Considerations Section in RFCs,” May 2008.).

7.  Security Considerations

Section 4 of RFC 3579 (Aboba, B. and P. Calhoun, “RADIUS (Remote Authentication Dial In User Service) Support For Extensible Authentication Protocol (EAP),” September 2003.) [RFC3579] discusses vulnerabilities of the RADIUS protocol.

Section 3 of the paper "Security Enhancements for Privacy and Key Management Protocol in IEEE 802.16e-2005" (Altaf, A., Jawad, M., and A. Ahmed, “Security Enhancements for Privacy and Key Management Protocol in IEEE 802.16e-2005,” 2008.) [SecEn] discusses the operation and vulnerabilities of the PKMv1 protocol.

If the Access-Request message is not subject to strong integrity protection, an attacker may be able to modify the contents of the PKM-Cryptosuite-List Attribute, weakening 802.16 security or disabling data encryption altogether.

If the Access-Accept message is not subject to strong integrity protection, an attacker may be able to modify the contents of the PKM-Auth-Key Attribute. For example, the Key field could be replaced with a key known to the attacker.

Although it is necessary for a plaintext copy of the Key field in the PKM-AUTH-Key Attribute to be transmitted in the Access-Accept message, this document does not define a method for doing so securely. In order to transfer the key securely, it is RECOMMENDED that it be encapsulated in an instance of the MS-MPPE-Send-Key Attribute [RFC2548] (Zorn, G., “Microsoft Vendor-specific RADIUS Attributes,” March 1999.); however, see Section 4.3.4 of RFC 3579 (Aboba, B. and P. Calhoun, “RADIUS (Remote Authentication Dial In User Service) Support For Extensible Authentication Protocol (EAP),” September 2003.) [RFC3579] for details regarding weaknesses in the encryption scheme used.

8.  References

8.1. Normative References

8.2. Informative References

Author's Address