| Internet-Draft | Mapping Origin Authorization | June 2024 |
| Xie, et al. | Expires 10 December 2024 | [Page] |
For the authenticity of the mapping origin of IPv4 address block in IPv6-only networks, this document defines a standard profile for Mapping Origin Authorizations (MOAs). MOA is a cryptographically signed object that provides a means of verifying that the holder of a set of IPv4 prefixes has authorized an IPv6 mapping prefix to originate mapping for those prefixes. When receiving the MOA objects from the relying parties, PE devices can verify and discard invalid address mapping announcements from unauthorized IPv6 mapping prefixes to prevent IPv4 prefix hijacking.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 10 December 2024.¶
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
This document defines security enhancement for the address mapping announcement in multi-domain IPv6-only underlay networks [I-D.ietf-v6ops-framework-md-ipv6only-underlay]. For IPv4 service delivery in multi-domain IPv6-only network, IPv6 mapping prefixes are configured at the PE devices to identify the location of IPv4 address blocks at the network edge, the mapping between IPv4 address block and IPv6 mapping prefix provides the direction of data forwarding in IPv6 network, the IPv6 mapping prefix is considered as the mapping origin of the IPv4 address block. In [I-D.ietf-idr-mpbgp-extension-4map6], PE device at the edge of the IPv6-only network distributes the mapping between an IPv4 address block and its mapping origin through 4map6 extension of MP-BGP. Based on the mapping data obtained, the ingress PE can statelessly transform the incoming IPv4 packets into IPv6 ones and send them to the correct egress PE.¶
From above it can be seen that the correctness of transmitting IPv4 service data in an IPv6-only network lies on the authenticity of the address mapping relationship. This can be further explained by the case where if an attacker maps an IPv4 address block using a fake IPv6 mapping prefix, IPv4 service data will be sent to the wrong egress PE, resulting in a situation of IPv4 prefix hijacking. In a small-scale controlled network, this problem may not be too serious. However, as the scale of IPv6-only deployment increases and there is interconnection between multiple operators, it is necessary to guarantee the authenticity of mapping relationship. This document proposes a new approach by leveraging Resource Public Key Infrastructure (RPKI) architecture to verify the authenticity of the mapping origin of an IPv4 address block. RPKI is a security framework by which network owners can validate and secure the critical route update or BGP announcements between public Internet networks [RFC6480]. For the scenario discussed, a new object, namely Mapping Origin Authorization (MOA), under the RPKI framework is defined in this document. MOA is a cryptographically signed mapping object between an IPv4 address block and its right mapping origin that is allowed to be declared in the announcement of MP-BGP. With this architecture, a legitimate holder of IPv4 address block, e.g. an ISP, can authorize an IPv6 mapping prefix to map IPv4 address block. A distributed repository system stores and disseminates the data objects that comprise the RPKI, as well as other signed objects necessary for improved mapping data and routing security. When receiving the MOA objects from the relying parties, PE routers can use them for Mapping Origin Validation (MOV) of IPv4 address blocks: verifying and discarding "invalid" address mapping announcements to prevent IPv4 prefix hijacking in IPv6 network.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14[RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
The following abbreviations and acronyms are used in this document:¶
– CMS: Cryptographic Message Syntax¶
– MOA: Mapping Origin Authorization¶
– MOV: Mapping Origin Validation¶
– MP-BGP: Multiprotocol BGP¶
– PE: Provider Edge¶
– PKI: Public Key Infrastructure¶
– RPKI: Resource Public Key Infrastructure¶
The content-type for a MOA is defined as MappingOriginAuthz and has the numerical value of x.x.xxx.xxxxx.x.x.x.x.xx.¶
This OID MUST appear both within the eContentType in the encapContentInfo object as well as the content-type signed attribute in the signerInfo object (see [RFC6488]).¶
The content of a MOA identifies a single IPv6 mapping prefix that has been authorized by the address holder to originate mapping and a list of one or more IPv4 prefixes that will be advertised. If the address holder needs to authorize multiple IPv6 mapping prefixes to advertise the same set of IPv4 prefixes, the holder issues multiple MOAs, one per IPv6 mapping prefix. A MOA is formally defined as:¶
MappingOriginAttestation ::= SEQUENCE {¶
version [0] INTEGER DEFAULT 0,¶
mappings SEQUENCE (SIZE(1..MAX)) OF MOAIPMapping }¶
MOAIPMapping ::= SEQUENCE {¶
v6MappingPrefix IPv6MappingPrefix,¶
v4Prefixs SEQUENCE (SIZE(1..MAX)) OF IPv4Prefix }¶
IPv6MappingPrefix ::= BIT STRING (SIZE (0..ub-IPv6))¶
IPv4Prefix ::= BIT STRING (SIZE (0..ub-IPv4))¶
ub-IPv6 INTEGER ::= 128¶
ub-IPv4 INTEGER ::= 32¶
Note that this content appears as the eContent within the encapContentInfo (see [RFC6488]).¶
The version number of the MappingOriginAttestation MUST be xxx.¶
The mappings element encodes the set of address mapping behavior, which indicates that the given IPv6 Mapping Prefix is authorized to originate mappings for single or a set of IPv4 prefixes.¶
Within the MOAIPMapping structure, v6MappingPrefix element contains the IPv6 prefix used to originate mapping for a set of IPv4 prefixes. The length of v6MappingPrefix can be set as 40, 48, 56, 64 or 96 in actual deployment. The v4Prefixs element represents IPv4 prefixes as a sequence of IPv4Prefix.¶
Before a relying party can use a MOA to validate a mapping announcement received, the relying party MUST first validate the MOA. To validate a MOA, the relying party MUST perform all the validation checks specified in [RFC6488] as well as the following additional MOA-specific validation step.¶
-The IP address delegation extension [RFC3779] is present in the end-entity (EE) certificate (contained within the MOA), and each IPv4 prefix(es) in the MOA is contained within the set of IP addresses specified by the EE certificate’s IP address delegation extension.¶
There is no assumption of confidentiality for the data in a MOA; it is anticipated that MOAs will be stored in repositories that are accessible to all ISPs, and perhaps to all Internet users. There is no explicit authentication associated with a MOA, since the PKI used for MOA validation provides authorization but not authentication.¶
Although the MOA is a signed, application-layer object, there is no intent to convey non-repudiation via a MOA.¶
The purpose of a MOA is to convey authorization for an IPv6 mapping prefix to originate a mapping to the prefix(es) in the MOA. Thus, the integrity of a MOA MUST be established. The MOA specification makes use of the RPKI signed object format; thus, all security considerations in [RFC6448] also apply to MOAs. Additionally, the signed object profile uses the CMS signed message format for integrity; thus, MOAs inherit all security considerations associated with that data structure.¶
The right of the MOA signer to authorize the target IPv6 mapping prefix to originate mappings to the prefix(es) is established through use of the address space and IPv6 mapping prefix number PKI described in[RFC6480]. Specifically, one MUST verify the signature on the MOA using an X.509 certificate issued under this PKI, and check that the prefix(es) in the ROA match those in the certificate’s address space extension.¶
As mentioned in [I-D.ietf-idr-mpbgp-extension-4map6], the 4map6 extension is mainly used for controlled IPv6-only network operated by single or multiple ISPs. In this scenario, as the IPv6 mapping prefix indicates the direction of IPv4 service data transmission in the IPv6-only network, and MOA is used to validate the mapping origin of IPv4 address block, there is no need to use IPv4 ROA for the validation of IPv4 BGP announcements; On the other hand, as the operation of MOA depends on the authenticity of address authorization in the underlying IPv6 network, if the IPv6 address prefix is maliciously originated by an third-party AS, even if the IPv4 address block is legitimately authorized to its corresponding IPv6 mapping prefix, traffic hijacking may occur due to the malicious announcement of the IPv6 mapping prefix. Therefore, it is recommended to also deploy IPv6 ROA validation where MOA is deployed.¶
With this document, IANA is requested to allocate the code for MOA in the registry of "RPKI Signed Objects". In addition, two OIDs need to be assigned by IANA, one for the module identifier, and another one for the content type. The codes will use this document as the reference.¶
The authors would like to express sincere thanks to Russ Housley and Job Snijders for their review, suggestions and contributions.¶
This normative appendix provides an ASN.1 module that specifies the MOA content in ASN.1 syntax.¶
RPKIMappingOriginAuthz-2024¶
{iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1)¶
pkcs9(9) smime(16) mod(0) TBD0 }¶
DEFINITIONS EXPLICIT TAGS ::= BEGIN¶
IMPORTS¶
CONTENT-TYPE¶
FROM CryptographicMessageSyntax-2009--in [RFC5911]¶
{ iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1)¶
pkcs9(9) smime(16) modules(0) id-mod-cms-2004-02(41) };¶
ct-MappingOriginAuthz CONTENT-TYPE ::=¶
{ TYPE MappingOriginAttestation¶
IDENTIFIEN BY id-ct-MappingOriginAuthz }¶
id-ct-MappingOriginAuthz OBJECT IDENTIFIER ::=¶
{ iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1)¶
pkcs9(9)smime(16) ct(1) TBD1 }¶
MappingOriginAttestation ::= SEQUENCE {¶
version [0] INTEGER DEFAULT 0,¶
mappings SEQUENCE (SIZE(1..MAX)) OF MOAIPMapping }¶
MOAIPMapping ::= SEQUENCE {¶
v6MappingPrefix IPv6MappingPrefix,¶
v4Prefixs SEQUENCE (SIZE(1..MAX)) OF IPv4Prefix }¶
IPv6MappingPrefix ::= BIT STRING (SIZE (0..ub-IPv6))¶
IPv4Prefix ::= BIT STRING (SIZE (0..ub-IPv4))¶
ub-IPv6 INTEGER ::= 128¶
ub-IPv4 INTEGER ::= 32¶
END¶