Nonce-based Freshness for Attestation in Certification Requests for use with the Certification Management Protocol

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶

This Internet-Draft will expire on 11 January 2024.¶

Copyright Notice

Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶

Table of Contents

1. Introduction

Certificate Management Protocol (CMP) [I-D.ietf-lamps-rfc4210bis] defines protocol messages for X.509v3 certificate creation and management. CMP provides interactions between client systems and PKI components, such as a Registration Authority (RA) and a Certification Authority (CA).¶

CMP allows an RA/CA to inform an end entity about the information it has to provide in a certification request. When an end entity places attestation information in form of evidence in a certification signing request (CSR) it may need to demonstrate freshness of the provided evidence. Such an attestation extension to a CSR is described in [I-D.ounsworth-csr-attestation]. Attestation technology today, such as [TPM20] and [I-D.tschofenig-rats-psa-token], often accomplishes this task via the help of nonces. A discussion of freshness approaches for evidence is found in Section 10 of [RFC9334].¶

For an end entity to include a nonce in the evidence (by the attester) it is necessary to obtain this nonce from the relying party, i.e. RA/CA in our use case, first. Since the CSR itself is a 'one-shot' message the CMP protocol is used to obtain the nonce from the RA/CA. CMP already offers a mechanism to request information from the RA/CA prior to a certification request. This document uses the CertReqTemplate described in Section 5.3.19.16 of [I-D.ietf-lamps-rfc4210bis]. Once the nonce is obtained the end entity can issue an API call to the attester to request evidence and passes the nonce as an input parameter into the API call. The returned evidence is then embedded into a CSR and returned to the RA/CA in a certification request message.¶

This exchange is shown graphically below.¶

 End entity                                          RA/CA
 ==========                                      =============

               -->>-- CertReqTemplate request -->>--
                                                Verify request
                                                Generate nonce
                                                Create response
               --<<-- CertReqTemplate response --<<--
                      (nonce)
 Generate key pair
 Fetch Evidence (with nonce) from attester
 Evidence Response from attestation
 Creation of certification request
 Protect request
               -->>-- certification request -->>--
                      (evidence including nonce)
                                                Verify request
                                                Verify evidence
                                                Create response
               --<<-- certification response --<<--
 Handle response

2. Terminology and Requirements Language

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].¶

The terms attester, relying party, verifier and evidence are defined in [RFC9334].¶

We use the terms certification signing request (CSR) and certification request interchangeably.¶

3. Certificate Request Template Extension

The following structure defines the attestation nonce provided by the CA/RA via a CertReqTemplate response message. This leads to an extra roundtrip to convey the nonce to the end entity (and ultimately to the attester functionality inside the device).¶

   id-ce-attestionNonce OBJECT IDENTIFIER ::=  { id-ce TBD }

   AttestationNonce ::= OCTET STRING

The end entity MUST construct a CertReqTemplate request message to trigger the RA/CA to transmit a nonce.¶

When the RA/CA receive the CertReqTemplate request message the profile information is used to determine that the end entity supports attestation functionality. If the end-entity supports attestation and the policy requires attestation information in a CSR to be provided, the RA/CA issues a CertReqTemplate response containing a nonce in in the template. The AttestationNonce MUST contain a random value that depends on the used attestation technology. For example, the PSA attestation token [I-D.tschofenig-rats-psa-token] supports nonces of length 32, 48 and 64 bytes. Other attestation technologies use nonces of similar length. The assumption in this specification is that the RA/CA have out-of-band knowledge about the required nonce length required for the technology used by the end entity.¶

When the end entity receives the CertReqTemplate response it MUST use this nonce as input to the API call made to the attester functionality on the device. While the semantic of the API call and the software/hardware architecture is out-of-scope of this specification, it will return evidence from the attester in a format specific to the attestation technology utilized. The encoding of the returned evidence varies but will be placed inside the CSR, as specified in [I-D.ounsworth-csr-attestation]. The software creating the CSR will not have to interpret the evidence format - it is treated as an opaque blob. It is important to note that the nonce is carried either implictily or explicitly in the evidence and it MUST NOT be conveyed in elements of the CSR.¶

The processing of the CSR containing attestation information is described in [I-D.ounsworth-csr-attestation]. Note that the CA MUST NOT issue a certificate that contains the extension provided in the CertReqTemplate containing the nonce. The nonce MUST only be used for determining freshness of the evidence provided by the attester. The nonce is not included in an X.509 certificate.¶

[Editor's Note: It may be useful to augment the CertReqTemplate request with information about the type of attestation technology/technologies available on the end entity. This is a topic for further discussion.]¶

4. IANA Considerations

TBD.¶

5. Security Considerations

This specification adds a nonce to the Certificate Request Template for use with attestation information in a CSR. This specification assumes that the nonce does not require confidentiality protection without impacting the security property of the attestation protocol. [RFC9334] defining the IETF remote attestation architecture discusses this and other aspects in more detail.¶

For the use of attestation in the CSR the security considerations of [I-D.ounsworth-csr-attestation] are relevant to this document.¶

6. Acknowledgments

Add your name here.¶

Authors' Addresses