Internet-Draft legacy modularity and eco-design May 2024
Stephan Expires 21 November 2024 [Page]
Workgroup:
WG Working Group
Internet-Draft:
draft-stephan-legacy-path-eco-design-00
Published:
Intended Status:
Informational
Expires:
Author:
E. Stephan
Orange

legacy modularity usage for eco-conception

Abstract

This draft discusses the usage of inventory information for assessing the adaptation of existing devices to eco-design. It is driven by the weight of the manufacturing in the sustainability cost with regard to the power consumption.

About This Document

This note is to be removed before publishing as an RFC.

The latest revision of this draft can be found at https://emile22.github.io/sustainability/draft-stephan-legacy-path-eco-design-latest.html. Status information for this document may be found at https://datatracker.ietf.org/doc/draft-stephan-legacy-path-eco-design/.

Discussion of this document takes place on the Green BoF individual mailing list (mailto:green-bof@ietf.org), which is archived at https://mailarchive.ietf.org/arch/browse/green-bof/. Subscribe at https://www.ietf.org/mailman/listinfo/green-bof/.

Source for this draft and an issue tracker can be found at https://github.com/emile22/sustainability.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 21 November 2024.

Table of Contents

1. Introduction

Many companies in Europe have integrated sustainability improvements into their core business strategies. It is driven by a growing awareness of environmental issues and regulatory requirements like CSRD (Corporate Sustainability Reporting Directive), a regulatory framework proposed by the European Commission to enhance corporate transparency and ensure that companies provide comparable information to assess their sustainability performance.

Sustainability impacts numerous aspects of the life cycle management (LCM) of devices. In this draft we discuss the advantages of leveraging existing devices modularity to introduce eco-designed components in the networks while being able to assess the gains in sustainability.

The rational is the urgent need to start decreasing resource consumption by simply replacing devices components. It can be view as a very basic use case of GREEN-bof [GREEN-BOF] approach.

2. Conventions and Definitions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

3. Network and devices modularity

Networks and theirs devices are modular per design to cope with manufacturing and operationnal obvious constraints. Existing devices are going to be progressively replaced with eco-design products. Both will co-exist in the networks as there is a balance to find between the increase of the live duration of existing devices and their replacement with eco-design devices [SUST-INS].

The same approach applies at the same time to individual devices: legacy devices will include progressively more and more eco-designed hardware components.

Eco Design means that the products include environmental considerations throughout their entire lifecycle to reduce their environmental impact. In France they are based on General Reference Base for Eco-Design in digital services ("RGESN") at https://ecoresponsable.numerique.gouv.fr/publications/referentiel-general-ecoconception/.

Eco-design can be summarized as the concepts and current practices related to the integration of environmental aspects into every stage of a product lifecycle. This starts at product design and development [ISO/TR 14062:2002 ]

The upgrade of legacy devices with eco-designed cards can be separate in 2 categories:

4. Simple Update

Network operators update their devices components since decades. By consequence, update with eco-designed components can started immediatly as there is no dependency on management solutions. The assessement of environmental and power gains can be done manually or with adhoc scripts from the datasheets of the manufacturer or using an adhoc processing.

It is clear that information for doing static assessement is spread over many media or OPS interfaces (datasheet, Web URL, CLI , YANG, MIB, IPFIX ...). A proposal consists in documenting how to do static assessement for a set of devices and components based on volontaring [GREEN-BOF].

In the mid term, in a way to scale the assessement, inventory [IVY-WG] requires to distinguish legacy devices which include eco-designed components and eco-designed components inside legacy devices. This must not delay the initial deployment of eco-designed components in legacy devices described above.

4.1. Simple Software Update

Software modularity increases with the generalisation of continuous developpement and deployement approaches. Power consumption of current software components of network devices are rarely evaluated. They can be updated immediatly 'just' by replacing with another one which consumes significally less power by itself.

It might seem inappropriate to try to decrease the power consumption of a software component as intituively it is only doing what is expected, so this can't be reduced.

This exists for assessing power efficiency of Web application components with good results. As an example, GreenIT is available as a browser plugin https://github.com/cnumr/GreenIT-Analysis.

5. Complex Update

Currently network devices are mostly always-on. The design of their software components do not include dynamic power management.

The update of legacy networks and devices to support dynamic power management is something complex because it impacts the different type of components:

Legacy hardware components are designed for being rarely stopped and re-started. The rythm of start/stop supported by such components must be documented to prevent wrong usage of their real capacity. This must be present in the datasheet or exposed by the components themselve.

6. Gain measurements

On the short term, as promoted by the GREEN-BoF, the assessement at the device level requires firstly datamodels augmentation [IVY-WG] to expose these capabilities and configuration updates and then metrics to measure the power consumption [POWEFF].

There is room for hackathon sessions to compare asessment methods.

7. Security Considerations

The tracking of LCM information may reveal information of the device usages.

8. IANA Considerations

At this step this document has no IANA actions.

9. References

9.1. Normative References

[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/rfc/rfc2119>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/rfc/rfc8174>.

9.2. Informative References

[GREEN-BOF]
"BOF proposal for GREEN WG Creation", , <https://github.com/marisolpalmero/GREEN-bof>.
[IVY-WG]
"Network Inventory YANG", , <https://datatracker.ietf.org/wg/ivy>.
[POWEFF]
Jan Lindblad, Snezana Mitrovic, Marisol Palmero, and Gonzalo Salgueiro, "Power and Energy Efficiency", , <https://datatracker.ietf.org/doc/html/draft-opsawg-poweff>.
[SUST-INS]
Per Andersson, Jan Lindblad, Snezana Mitrovic, Marisol Palmero, Esther Roure, Gonzalo Salgueiro, and Stephan Emile, "Sustainability Insights", , <https://datatracker.ietf.org/doc/draft-almprs-sustainability-insights/>.

Acknowledgments

TODO acknowledge.

Author's Address

Emile Stephan
Orange
2, avenue Pierre Marzin
22300 Lannion
France