| Internet-Draft | BGP SendHoldTimer | August 2022 |
| Snijders & Cartwright-Cox | Expires 20 February 2023 | [Page] |
This document defines the SendHoldTimer session attribute for the Border Gateway Protocol (BGP) Finite State Machine (FSM). Implementation of a SendHoldTimer should help overcome situations where BGP sessions are not terminated after it has become detectable for the local system that the remote system is not processing BGP messages. For robustness, this document specifies that the local system should close BGP connections and not solely rely on the remote system for session closure when BGP timers have expired. This document updates RFC4271.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 20 February 2023.¶
Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
This document defines the SendHoldTimer session attribute for the Border Gateway Protocol (BGP) [RFC4271] Finite State Machine (FSM) defined in section 8.¶
Failure to terminate a 'stuck' BGP session can result in Denial Of Service, the subsequent failure to generate and deliver BGP WITHDRAW messages to other BGP peers of the local system is detrimental to all participants of the inter-domain routing system. This phenomena is theorised to have contributed to IP traffic backholing events in global Internet routing system [bgpzombies].¶
This specification intends to improve this situation by requiring sessions to be terminated if the local system has detected that the remote system cannot possibly have received any BGP messages for the duration of the SendHoldTimer. Through codification of the aforementioned requirement, operators will benefit from consistent behavior across different BGP implementations.¶
BGP speakers following this specification do not exclusively rely on remote systems robustly closing connections, but will also locally close connections.¶
In implementations lacking the concept of a SendHoldTimer, a malfunctioning or overwhelmed remote peer may cause data on the BGP socket in the local system to accumulate ad infinitum. This could result in forwarding failure and traffic loss, as the overwhelmed peer continues to utilize stale routes.¶
An example fault state: as BGP runs over TCP [RFC9293] it is possible for hosts in the ESTABLISHED state to encounter a BGP peer that is advertising a TCP Receive Window (RCV.WND) of size zero, this 0 window prevents the local system from sending KEEPALIVE, CEASE, WITHDRAW, UPDATE, or any other critical BGP messages across the network socket to the remote peer. Historically, many BGP implementations were unable to handle this situation in a robust fashion. Previous BGP RFC specifications would not give cause for the session to be torn down in such situations.¶
Generally BGP implementation have no visibility into lower-layer subsystems such as TCP or the peer's current Receive Window. Therefore, this document relies upon BGP implementations having the ability to detect whether the TCP socket to a BGP peer is progressing (data is being transmitted), or persisting in a stalled state.¶
BGP speakers are implemented following a conceptual model "BGP Finite State Machine" (FSM), which is outlined in section 8 of [RFC4271]. This specification updates the BGP FSM as following:¶
The following mandatory session attributes are added to paragraph 6 of Section 8, before "The state session attribute indicates the current state of the BGP FSM":¶
Section 8.1.3 [RFC4271] is extended as following:¶
Event XX1: SendHoldTimer_Expires
Definition : An event generated when the SendHoldTimer expires.
Status: Mandatory
¶
If the SendHoldTimer_Expires (Event XX1), the local system:¶
If the DelayOpenTimer_Expires event (Event 12) occurs in the Connect state, the local system:¶
If the DelayOpen attribute is set to FALSE, the local system:¶
A HoldTimer value of 4 minutes is suggested.¶
A SendHoldTimer value of 8 minutes is suggested.¶
Section 8.1.5 [RFC4271] is extended as following:¶
Event XX2: MsgSent Definition: An event is generated when a KEEPALIVE or UPDATE message is transmitted. Status: Mandatory¶
On page 74 [RFC4271] before "If the local system receives an UPDATE message, and the UPDATE message error handling procedure (see Section 6.3) detects an error (Event 28), the local system:", add the following:¶
If the local system transmits a KEEPALIVE or UPDATE message (MsgSent (Event XX2)), the local system:¶
If a system does not send successive KEEPALIVE, UPDATE, and/or NOTIFICATION messages within the period specified in the Send Hold Time, then the BGP connection is closed and a log message is emitted.¶
When the local system recognizes a remote peer is not processing any BGP messages for the duration of the Send Hold Timer, the local system will not be able to inform the remote peer through a BGP message as to why the session is being closed (i.e. a NOTIFICATION message with the "Send Hold Timer Expired" error code).¶
Even so, BGP speakers SHOULD provide this reason as part of their operational state; e.g. bgpPeerLastError in the BGP MIB [RFC4273].¶
This specification addresses the vulnerability of a BGP speaker to a potential attack whereby a BGP peer can pretend to be unable to process BGP messages and in doing so create a scenario where the local system is poisoned with stale routing information.¶
There are three detrimental aspects to the problem of not robustly handling 'stuck' peers:¶
In other respects, this specification does not change BGP's security characteristics.¶
This document requests IANA to assign a value named "Send Hold Timer Expired" in the "BGP Error (Notification) Codes" sub-registry under the "Border Gateway Protocol (BGP) Parameters" registry.¶
The authors would like to thank William McCall, Theo de Raadt, John Heasley, Nick Hilliard, Jeffrey Haas, and Tom Petch for their helpful review of this document.¶
This section records the status of known implementations of the protocol defined by this specification at the time of posting of this Internet-Draft, and is based on a proposal described in RFC 7942. The description of implementations in this section is intended to assist the IETF in its decision processes in progressing drafts to RFCs. Please note that the listing of any individual implementation here does not imply endorsement by the IETF. Furthermore, no effort has been spent to verify the information presented here that was supplied by IETF contributors. This is not intended as, and must not be construed to be, a catalog of available implementations or their features. Readers are advised to note that other implementations may exist.¶
According to RFC 7942, "this will allow reviewers and working groups to assign due consideration to documents that have the benefit of running code, which may serve as evidence of valuable experimentation and feedback that have made the implemented protocols more mature. It is up to the individual working groups to use this information as they see fit".¶