FCAST: Scalable Object Delivery for the ALC and NORM Protocols
draft-roca-rmt-newfcast-06

Status of this Memo

This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt.

The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html.

This Internet-Draft will expire on April 22, 2010.

Copyright Notice

Copyright (c) 2009 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents in effect on the date of publication of this document (http://trustee.ietf.org/license-info). Please review these documents carefully, as they describe your rights and restrictions with respect to this document.

Abstract

This document introduces the FCAST object (e.g., file) delivery application on top of the ALC and NORM reliable multicast protocols. FCAST is a highly scalable application that provides a reliable object delivery service.

Table of Contents

1.  Introduction
    1.1.  Applicability
2.  Requirements notation
3.  Definitions, Notations and Abbreviations
    3.1.  Definitions
    3.2.  Abbreviations
4.  FCAST Principles
    4.1.  FCAST Content Delivery Service
    4.2.  Meta-Data Transmission
    4.3.  Meta-Data Content
    4.4.  Carousel Transmission
    4.5.  Carousel Instance Object
    4.6.  Compound Object Identification
    4.7.  FCAST/ALC Additional Specificities
    4.8.  FCAST/NORM Additional Specificities
    4.9.  FCAST Sender Behavior
    4.10.  FCAST Receiver Behavior
5.  FCAST Specifications
    5.1.  Compound Object Header Format
    5.2.  Carousel Instance Object Format
6.  Security Considerations
    6.1.  Problem Statement
    6.2.  Attacks Against the Data Flow
        6.2.1.  Access to Confidential Objects
        6.2.2.  Object Corruption
    6.3.  Attacks Against the Session Control Parameters and Associated Building Blocks
        6.3.1.  Attacks Against the Session Description
        6.3.2.  Attacks Against the FCAST CIO
        6.3.3.  Attacks Against the Object Meta-Data
        6.3.4.  Attacks Against the ALC/LCT and NORM Parameters
        6.3.5.  Attacks Against the Associated Building Blocks
    6.4.  Other Security Considerations
7.  IANA Considerations
8.  Acknowledgments
9.  References
    9.1.  Normative References
    9.2.  Informative References
Appendix A.  FCAST Examples
    A.1.  Basic Examples
    A.2.  FCAST/NORM with NORM_INFO Examples
§  Authors' Addresses

1.  Introduction

This document introduces the FCAST reliable and scalable object (e.g., file) delivery application. Two versions of FCAST exist:

• FCAST/ALC that relies on the Asynchronous Layer Coding (ALC) [RMT‑PI‑ALC] (Luby, M., Watson, M., and L. Vicisano, “Asynchronous Layered Coding (ALC) Protocol Instantiation,” November 2008.) and the Layered Coding Transport (LCT) [RMT‑BB‑LCT] (Luby, M., Watson, M., and L. Vicisano, “Layered Coding Transport (LCT) Building Block,” March 2009.) reliable multicast transport protocol, and
• FCAST/NORM that relies on the NACK-Oriented Reliable Multicast (NORM) [RMT‑PI‑NORM] (Adamson, B., Bormann, C., Handley, M., and J. Macker, “Negative-acknowledgment (NACK)-Oriented Reliable Multicast (NORM) Protocol,” June 2009.) reliable multicast transport protocol.

Hereafter, the term FCAST denotes either FCAST/ALC or FCAST/NORM.

Depending on the target use case, the delivery service provided by FCAST is more or less reliable. For instance, with FCAST/ALC used in ON-DEMAND mode over a time period that largely exceeds the typical download time, the service can be considered as fully reliable. Similarly, when FCAST is used along with a session control application that collects reception information and takes appropriate corrective measures (e.g., a direct point-to-point retransmission of missing packets, or a new multicast recovery session), then the service can be considered as fully reliable. On the opposite, if FCAST operates in PUSH mode, then the service is usually only partially reliable, and a receiver that is disconnected during a sufficient time will perhaps not have the possibility to download the object.

Depending on the target use case, the FCAST scalability is more or less important. For instance, if FCAST/ALC is used on top of purely unidirectional transport channels, with no feedback information at all, which is the default mode of operation, then the scalability is maximum since neither FCAST, nor ALC, UDP or IP generates any feedback message. On the opposite, the FCAST/NORM scalability is typically limited by NORM scalability itself. Similarly, if FCAST is used along with a session control application that collects reception information from the receivers, then this session control application may limit the scalability of the global object delivery system. This situation can of course be mitigated by using a hierarchy of feedback message aggregators or servers. The details of this are out of the scope of the present document.

A design goal behind FCAST is to define a streamlined solution, in order to enable lightweight implementations of the protocol stack, and limit the operational processing and storage requirements. A consequence of this choice is that FCAST cannot be considered as a versatile application, capable of addressing all the possible use-cases. On the opposite, FCAST has some intrinsic limitations. From this point of view it differs from FLUTE [RMT‑FLUTE] (Paila, T., Walsh, R., Luby, M., Lehtonen, R., and V. Roca, “FLUTE - File Delivery over Unidirectional Transport,” September 2008.) which favors flexibility at the expense of some additional complexity.

A good example of the design choices meant to favor the simplicity is the way FCAST manages the object meta-data: by default, the meta-data and the object content are sent together, in a compound object. This solution has many advantages in terms of simplicity as will be described later on. However, as such, it also has an intrinsic limitation since it does not enable a receiver to decide in advance, before beginning the reception of the compound object, whether the object is of interest or not, based on the information that may be provided in the meta-data. Therefore this document defines additional techniques that may be used to mitigate this limitation. It is also possible that some use-cases require that each receiver download the whole set of objects sent in the session (e.g., with mirroring tools). When this is the case, the above limitation is no longer be a problem.

1.1.  Applicability

FCAST is compatible with any congestion control protocol designed for ALC/LCT or NORM. However, depending on the use-case, the data flow generated by the FCAST application might not be constant, but instead be bursty in nature. Similarly, depending on the use-case, an FCAST session might be very short. Whether and how this will impact the congestion control protocol is out of the scope of the present document.

FCAST is compatible with any security mechanism designed for ALC/LCT or NORM. The use of a security scheme is strongly RECOMMENDED (see Section 6 (Security Considerations)).

FCAST is compatible with any FEC scheme designed for ALC/LCT or NORM. Whether FEC is used or not, and the kind of FEC scheme used, is to some extent transparent to FCAST.

FCAST is compatible with both IPv4 and IPv6. Nothing in the FCAST specification has any implication on the source or destination IP address.

2.  Requirements notation

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119] (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.).

3.  Definitions, Notations and Abbreviations

3.1.  Definitions

This document uses the following definitions:

FCAST/ALC:

denotes the FCAST application running on top of the ALC/LCT reliable transport protocol;

FCAST/NORM:

denotes the FCAST application running on top of the NORM reliable transport protocol;

FCAST:

denotes either FCAST/ALC or FCAST/NORM;

Compound Object:

denotes an ALC or NORM transport object composed of the Compound Object Header (Section 5.1 (Compound Object Header Format)), including any meta-data, and the content of the original application object (e.g., a file);

Carousel:

denotes the Compound Object transmission system of an FCAST sender;

Carousel Instance:

denotes a fixed set of registered Compound Objects that are sent by the carousel during a certain number of cycles. Whenever Compound Objects need to be added or removed, a new Carousel Instance is defined;

Carousel Instance Object (CIO):

denotes a specific object that lists the Compound Objects that comprise a given Carousel Instance;

Carousel Cycle:

denotes a transmission round within which all the Compound Objects registered in the Carousel Instance are transmitted a certain number of times. By default, Compound Objects are transmitted once per cycle, but higher values are possible, that might differ on a per-object basis;

Transmission Object Identifier (TOI):

denotes the numeric identifier associated to a specific object by the underlying transport layer. In the case of ALC, this corresponds to the TOI described in that specification while for the NORM specification this corresponds to the NormTransportId described there.

3.2.  Abbreviations

This document uses the following abbreviations:

CIO:

Carousel Instance Object

CIID:

Carousel Instance IDentifier

FEC OTI:

FEC Object Transmission Information

TOI:

Transmission Object Identifier

4.  FCAST Principles

4.1.  FCAST Content Delivery Service

The basic goal of FCAST is to transmit objects to a group of receivers in a reliable way. The receiver set MAY be restricted to a single receiver or MAY include possibly a very large number of receivers. FCAST is specified to support two forms of operation:

1. FCAST/ALC: where the FCAST application is meant to run on top of the ALC/LCT reliable multicast transport protocol, and
2. FCAST/NORM: where the FCAST application is meant to run on top of the NORM reliable multicast transport protocol.

This specification is designed such that both forms of operation share as much commonality as possible.

While the choice of the underlying transport protocol (i.e., ALC or NORM) and its parameters may limit the practical receiver group size, nothing in FCAST itself limits it. The transmission might be fully reliable, or only partially reliable depending upon the way ALC or NORM is used (e.g., whether FEC encoding and/or NACK-based repair requests are used or not), the way the FCAST carousel is used (e.g., whether the objects are made available for a long time span or not), and the way in which FCAST itself is employed (e.g., whether there is a session control application that might automatically extend an existing FCAST session until all receivers have received the transmitted content).

FCAST is designed to be as self-sufficient as possible, in particular in the way object meta-data is attached to object data content. However, for some uses, meta-data MAY also be communicated by an out-of-band mechanism that is out of the scope of the present document.

4.2.  Meta-Data Transmission

FCAST usually carries meta-data elements by prepending them to the object it refers to. As a result, a Compound Object is created that is composed of a header followed by the original object data. This header is itself composed of the meta-data as well as several fields, for instance to indicate the boundaries between the various parts of this Compound Object (Figure 1 (Compound Object composition.)).

<------------------------ Compound Object ----------------------->
+-------------------------+--------------------------------------+
|  Compound Object Header |              Object Data             |
| (can include meta-data) |       (can be encoded by FCAST)      |
+-------------------------+--------------------------------------+

Attaching the meta-data to the object is an efficient solution, since it guaranties that meta-data be received along with the associated object, and it allows the transport of the meta-data to benefit from any transport-layer erasure protection of the Compound Object (e.g., using FEC encoding and/or NACK-based repair). However a limit of this scheme, as such, is that a client does not know the meta-data of an object before beginning its reception, and in case of erasures affecting the meta-data, not until the object decoding is completed. The details of course depend upon the transport protocol and the FEC code used.

In certain use-cases, FCAST can also be associated to another in-band (e.g., via NORM INFO messages, Section 4.8 (FCAST/NORM Additional Specificities)) or out-of-band signaling mechanism. In that case, this mechanism can be used in order to carry the whole meta-data (or a subset of it), possibly ahead of time.

4.3.  Meta-Data Content

The meta-data associated to an object can be composed of, but are not limited to:

• Content-Location: the URI of the object, which gives the name and location of the object;
• Content-Type: the MIME type of the object;
• Content-Length: the size of the initial object, before any content encoding (if any). Note that this content length does not include the meta-data nor the fixed size Compound Object header;
• Content-Encoding: the optional encoding of the object performed by FCAST. If there is no Content-Encoding entry, the receiver MUST assume that the object is not encoded (default). The support of gzip encoding, or any other solution, remains optional.
• Content-MD5: the MD5 message digest of the object in order to check its integrity. Note that this digest is meant to protect from transmission and processing errors, not from deliberate attacks by an intelligent attacker. Note also that this digest only protects the object, not the header, and therefore not the meta-data. A separate checksum is provided to that purpose (Section 5.1 (Compound Object Header Format));
• a digital signature for this object;

This list is not limited and new meta-data information can be added. For instance, when dealing with very large objects (e.g., that largely exceed the working memory of a receiver), it can be interesting to split this object into several sub-objects (or slices). When this happens, the meta-data associated to each sub-object MUST include the following entries:

• Fcast-Obj-Slice-Nb: the total number of slices. A value strictly greater than 1 indicates that this object is the result of a split of the original object;
• Fcast-Obj-Slice-Idx: the slice index (in the {0 .. SliceNb - 1} interval);
• Fcast-Obj-Slice-Offset: the offset at which this slice starts within the original object;

When meta-data elements are communicated out-of-band, in advance of data transmission, the following pieces of information MAY also be useful:

• TOI: the Transmission Object Identifier (TOI) of the object (Section 4.6 (Compound Object Identification)), in order to enable a receiver to easily associate the meta-data to the object;
• FEC Object Transmission Information (FEC OTI). In this case the FCAST sender does not need to use the optional EXT_FTI mechanism of the ALC or NORM protocols.

4.4.  Carousel Transmission

A set of FCAST Compound Objects scheduled for transmission are considered a logical "Carousel". A given "Carousel Instance" is comprised of a fixed set of Compound Objects. Whenever the FCAST application needs to add new Compound Objects to, or remove old Compound Objects from the transmission set, a new Carousel Instance is defined since the set of Compound Objects changes.

For a given Carousel Instance, one or more transmission cycles are possible. During each cycle, all of the Compound Objects comprising the Carousel are sent. By default, each object is transmitted once per cycle. However, in order to allow different levels of priority, some objects MAY be transmitted more often that others during a cycle, and/or benefit from higher FEC protection than others. This can be the case for instance of the CIO objects (Section 4.5 (Carousel Instance Object)). For some FCAST usage (e.g., a unidirectional "push" mode), a Carousel Instance may be associated to a single transmission cycle. In other cases it may be associated to a large number of transmission cycles (e.g., in "on-demand" mode, where objects are made available for download during a long period of time).

4.5.  Carousel Instance Object

The FCAST sender CAN transmit an OPTIONAL Carousel Instance Object (CIO). The CIO carries the list of the Compound Objects that are part of a given Carousel Instance, by specifying their respective Transmission Object Identifiers (TOI). However the CIO does not describe the objects themselves (i.e., there is no meta-data). Additionally, the CIO MAY include a "Complete" flag that is used to indicate that no further modification to the enclosed list will be done in the future. Finally, the CIO MAY include a Carousel Instance ID that identifies the Carousel Instance it pertains to. These aspects are discussed in Section 5.2 (Carousel Instance Object Format).

There is no reserved TOI value for the CIO itself, since this object is regarded by ALC/LCT or NORM as a standard object. On the opposite, the nature of this object (CIO) is indicated by means of a specific Compound Object header field (the "I" flag) so that it can be recognized and processed by the FCAST application as needed. A direct consequence is the following: since a receiver does not know in advance which TOI will be used for the following CIO (in case of a dynamic session), he MUST NOT filter out packets that are not in the current CIO's TOI list. Said differently, the goal of CIO is not to setup ALC or NORM packet filters (this mechanism would not be secure in any case).

The use of a CIO remains optional. If it is not used, then the clients progressively learn what files are part of the carousel instance by receiving ALC or NORM packets with new TOIs. However using a CIO has several benefits:

• When the "Complete" flag is set (if ever), the receivers know when they can leave the session, i.e., when they have received all the objects that are part of the last carousel instance of this delivery session;
• In case of a session with a dynamic set of objects, the sender can reliably inform the receivers that some objects have been removed from the carousel with the CIO. This solution is more robust than the "Close Object flag (B)" of ALC/LCT since a client with an intermittent connectivity might loose all the packets containing this B flag. And while NORM provides a robust object cancellation mechanism in the form of its NORM_CMD(SQUELCH) message in response to receiver NACK repair requests, the use of the CIO provides an additional means for receivers to learn of objects for which it is futile to request repair;
• The TOI equivalence (Section 4.6 (Compound Object Identification)) can be signaled with the CIO. This is often preferable to the alternative solution where the equivalence is identified by examining the object meta-data, especially in case of erasures.

During idle periods, when the carousel instance does not contain any object, a CIO with an empty TOI list MAY be transmitted. In that case, a new carousel instance ID MUST be used to differentiate this (empty) carousel instance from the other ones. This mechanism can be useful to inform the receivers that:

• all the previously sent objects have been removed from the carousel. It therefore improves the FCAST robustness even during "idle" period;
• the session is still active even if there is currently no content being sent. Said differently, it can be used as a heartbeat mechanism. If the "Complete" flag has not been set, it implicitly informs the receivers that new objects MAY be sent in the future;

The decisions of whether a CIO should be used or not, how often and when a CIO should be sent, are left to the sender and depend on many parameters, including the target use case and the session dynamics. For instance it may be appropriate to send a CIO at the beginning of each new carousel instance, and then periodically. These operational aspects are out of the scope of the present document.

4.6.  Compound Object Identification

The FCAST Compound Objects are directly associated with the object-based transport service that the ALC and NORM protocols provide. In each of these protocols, the messages containing transport object content are labeled with a numeric transport object identifier (i.e., the ALC TOI and the NORM NormTransportId). For the purposes of this document, this identifier in either case (ALC or NORM) is referred to as the TOI.

There are several differences between ALC and NORM:

• the ALC use of TOI is rather flexible, since several TOI field sizes are possible (from 16 to 112 bits), since this size can be changed at any time, on a per-packet basis, and since the TOI management is totally free as long as each object is associated to a unique TOI (if no wraparound happened);
• the NORM use of TOI is more directive, since the TOI field is 16 bit long and since TOIs MUST be managed sequentially;

In both NORM and ALC, it is possible that the transport identification space may eventually wrap for long-lived sessions (especially with NORM where this phenomenon is expected to happen more frequently). This can possibly introduce some ambiguity in FCAST object identification if a sender retains some older objects in newer Carousel Instances with updated object sets. Thus, when an updated object set, for a new Carousel Instance, would transport identifiers that exceed one-half of the TOI sequence space (or otherwise exceed the sender repair window capability in the case of NORM), it MAY be necessary to re-enqueue old objects within the Carousel with new TOI to stay within transport identifier limits. In case of NORM, this constraint limits to 32768 the maximum number of objects that can be part of any carousel instance. In order to allow receivers to properly combine the transport packets with a newly-assigned TOI to those of associated to the previously-assigned TOI, a mechanism is required to equate the objects with the new and the old TOIs.

The preferred mechanism consists in signaling, within the CIO, that the newly assigned TOI, for the current Carousel Instance, is equivalent to the TOI used within a previous Carousel Instance. By convention, the reference tuple for any object is the {TOI; CI ID} tuple used for its first transmission within a Carousel Instance. This tuple MUST be used whenever a TOI equivalence is provided.

An alternative solution, when meta-data can be processed rapidly (e.g., by using NORM-INFO messages), consists for the receiver in identifying that both objects are the same, after examining the meta-data. The receiver can then take appropriate measures.

4.7.  FCAST/ALC Additional Specificities

There are no additional detail or option for FCAST/ALC operation.

4.8.  FCAST/NORM Additional Specificities

The NORM Protocol provides a few additional capabilities that can be used to specifically support FCAST operation:

1. The NORM_INFO message can convey "out-of-band" content with respect to a given transport object. With FCAST, it MAY be used to provide to the receivers a new, associated, Compound Object which contains the main Compound Object meta-data, or a subset of it. In that case the NORM_INFO Compound Object MUST NOT contain any Object Data field (i.e., it is only composed of the header), it MUST feature a non global checksum, and it MUST NOT include any padding field. The main Compound Object MUST in any case contain the whole meta-data (e.g., because a receiver MAY not support the NORM_INFO facility). Additionally, the meta-data entries contained in the NORM_INFO MUST be identical to the same entries in the main Compound Object. Finally, note that the availability of NORM_INFO for a given object is signaled through the use of a dedicated flag in the NORM_DATA message header. Along with NORM's NACK-based repair request signaling, it allows a receiver to quickly (and independently) request an object's NORM_INFO content. However, a limitation here is that the NORM_INFO Compound Object header MUST fit within the byte size limit defined by the NORM sender's configured "segment size" (typically a little less than the network MTU);
2. The NORM_CMD(SQUELCH) messages are used by the NORM protocol sender to inform receivers of objects that have been canceled when receivers make repair requests for such invalid objects. Along with the CIO mechanism, a receiver has two efficient and reliable ways to discover old objects that have been removed from the carousel instance;
3. NORM also supports an optional positive acknowledgment mechanism that can be used for small-scale multicast receiver group sizes. Also, it may be possible in some cases for the sender to infer, after some period without receiving NACKs at the end of its transmission that the receiver set has fully received the transmitted content. In particular, if the sender completes its end-of-transmission series of NORM_CMD(FLUSH) messages without receiving repair requests from the group, it may have some assurance that the receiver set has received the content prior to that point. These mechanisms are likely to help FCAST in achieving fully reliable transmissions;

It should be noted that the NORM_INFO message header may carry the EXT_FTI extension. The reliable delivery of the NORM_INFO content allows the individual objects' FEC Transmission Information to be provided to the receivers without burdening every packet (i.e. NORM_DATA messages) with this additional, but important, content. Examples are provided in Appendix A (FCAST Examples).

4.9.  FCAST Sender Behavior

The following operations MAY take place at a sender:

1. The user (or another application) selects a set of objects (e.g., files) to deliver and submits them, along with their meta-data, to the FCAST application;
2. For each object, FCAST creates the Compound Object and registers this latter in the carousel instance;
3. The user then informs FCAST that all the objects of the set have been submitted. If the user knows that no new object will be submitted in the future (i.e., if the session's content is now complete), the user informs FCAST. Finally, the user specifies how many transmission cycles are desired (this number may be infinite);
4. At this point, the FCAST application knows the full list of Compound Objects that are part of the Carousel Instance and can create a CIO if desired, possibly with the complete flag set;
5. The FCAST application can now define a transmission schedule of these Compound Objects, including the optional CIO. This schedule defines in which order the packets of the various Compound Objects should be sent. This document does not specify any scheme. This is left to the developer within the provisions of the underlying ALC or NORM protocol used and the knowledge of the target use-case.
6. The FCAST application then starts the carousel transmission, for the number of cycles specified. Transmissions take place until:
   • the desired number of transmission cycles has been reached, or
   • the user wants to prematurely stop the transmissions, or
   • the user wants to add one or several new objects to the carousel, or on the opposite wants to remove old objects from the carousel. In that case a new carousel instance must be created.
7. If the session is not finished, then continue as Set 1 above;

4.10.  FCAST Receiver Behavior

The following operations MAY take place at a receiver:

1. The receiver joins the session and collects incoming packets;
2. If the header portion of a Compound Object is entirely received (which may happen before receiving the entire object with some ALC/NORM configurations), or if the meta-data is sent by means of another mechanism prior to the object, the receiver processes the meta-data and chooses to continue to receive the object content or not;
3. When a Compound Object has been entirely received, the receiver processes the header, retrieves the object meta-data, perhaps decodes the meta-data, and processes the object accordingly;
4. When a CIO is received, which is indicated by the 'I' flag set in the Compound Object header, the receiver decodes the CIO, and retrieves the list of objects that are part of the current carousel instance. This list CAN be used to remove objects sent in a previous carousel instance that might not have been totally decoded and that are no longer part of the current carousel instance;
5. When a CIO is received, the receiver also retrieves the list of TOI equivalences, if any, and takes appropriate measures, for instance by informing the transport layer;
6. When a receiver has received a CIO with the "Complete" flag set, and has successfully received all the objects of the current carousel instance, it can safely exit from the current FCAST session;
7. Otherwise continue at Step 2 above.

5.  FCAST Specifications

This section details the technical aspects of FCAST.

5.1.  Compound Object Header Format

In an FCAST session, Compound Objects are constructed by prepending the Compound Object Header (which may include meta-data) before the original object data content (Figure 2 (Compound Object Header with Meta-Data.)).

 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+  ^
|rsv|G|C|MDF|MDE|                 Header Length                 |  |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+  |
|            Checksum           |                               |  h
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+                               |  d
|         Object Meta-Data (optional, variable length)          |  r
|                               +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+  |
|                               |      Padding (optional)       |  |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+  v
|                                                               |
.          Object Data (optional, variable length)              .
.                                                               .
.                                                               .

The Compound Object Header fields are:

The Compound Object Header is then followed by the Object Data, i.e., the original object possibly encoded by FCAST. Note that the length of this content is the transported object length (e.g., as specified by the FEC OTI) minus the Header Length and optional padding if any.

5.2.  Carousel Instance Object Format

The format of the CIO, which is a particular Compound Object, is given in Figure 3 (Carousel Instance Object Format.).

 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+  ^
|rsv|G|1|MDF|MDE|                 Header Length                 |  |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+  |
|            Checksum           |                               |  h
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+                               |  d
|         Object Meta-Data (optional, variable length)          |  r
|                               +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+  |
|                               |      Padding (optional)       |  |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+  v
.                                                               .  ^
.                Object List (variable length)                  .  |
.                                                               .  o
.                                               +-+-+-+-+-+-+-+-+  b
.                                               |                  j
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+                  v

Because the CIO is transmitted as a special Compound Object, the following CIO-specific meta-data entries are defined:

• Fcast-CIO-Complete: when set to 1, it indicates that no new objects in addition to the ones whose TOI are specified in this CIO, or the ones that have been specified in the previous CIO(s), will be sent in the future. Otherwise it MUST be set to 0. This entry is optional. If absent, a receiver MUST conclude that the session is complete.
• Fcast-CIO-ID: this value identifies the carousel instance. It starts from 0 and is incremented by 1 for each new carousel instance. This entry is optional if the FCAST session consists of a single, complete, carousel instance. In all other cases, this entry MUST be defined. In particular, the CIID is used by the TOI equivalence mechanism thanks to which any object is uniquely identified, even if the TOI is updated (e.g., after re-enqueuing the object with NORM). The Fcast-CIO-ID value can also be useful to detect possible gaps in the Carousel Instances, for instance caused by long disconnection periods. Finally, it can also be useful to avoid problems when TOI wrapping to 0 takes place to differentiate the various incarnations of the TOIs if need be.

The motivation for making the Fcast-CIO-Complete and Fcast-CIO-Complete entries optional is to simplify the simple case of a session consisting of a single, complete, carousel instance. Indeed, the CIO does not need to contain any meta-data entry then.

Additionally, the following standard meta-data entries are often used (Section 4.3 (Meta-Data Content)):

• Content-Length: it specifies the size of the object list, before any content encoding (if any).
• Content-Encoding: it specifies the optional encoding of the object list, performed by FCAST. For instance:

          Content-Encoding: gzip

  indicates that the Object List field has been encoded with gzip [RFC1952] (Deutsch, P., Gailly, J-L., Adler, M., Deutsch, L., and G. Randers-Pehrson, “GZIP file format specification version 4.3,” May 1996.). If there is no Content-Encoding entry, the receiver MUST assume that the Object List field is plain text (default). The support of gzip encoding, or any other solution, remains optional.

An empty Object List is valid and indicates that the current carousel instance does not include any object (Section 4.5 (Carousel Instance Object)). This can be specified by using the following meta-data entry:

        Content-Length: 0

or simply by leaving the Object List empty. In both cases, padding MUST NOT be used and consequently the transported object length (e.g., as specified by the FEC OTI) minus the Header Length equals zero.

The non-encoded (i.e., plain text) Object List, when non empty, is a NULL-terminated ASCII string. It can contain two things:

• a list of TOI values, and
• a list of TOI equivalences;

First of all, this string can contain the list of TOIs included in the current carousel instance, specified either as the individual TOIs of each object, or as TOI intervals, or any combination. The format of the ASCII string is a comma-separated list of individual "TOI" values or "TOI_a-TOI_b" elements. This latter case means that all values between TOI_a and TOI_b, inclusive, are part of the list. In that case TOI_a MUST be strictly inferior to TOI_b. If a TOI wrapping to 0 occurs in an interval, then two TOI intervals MUST be specified, TOI_a-MAX_TOI and 0-TOI_b.

This string can also contain the TOI equivalences, if any. The format is a comma-separated list of "(" newTOI "=" 1stTOI "/" 1stCIID ")" elements. Each element says that the new TOI, for the current Carousel Instance, is equivalent to (i.e., refers to the same object as) the provided identifier, 1stTOI, for the Carousel Instance of ID 1stCIID.

The ABNF specification is the following:

cio-list   =  *(list-elem *( "," list-elem))
list-elem    =  toi-elem / toieq-elem
toi-elem     =  toi-value / toi-interval
toi-value    =  1*DIGIT
toi-interval =  toi-value "-" toi-value
                ; additionally, the first toi-value MUST be
                ; strictly inferior to the second toi-value
toieq-elem   =  "(" toi-value "=" toi-value "/" ciid-value ")"
ciid-value   = 1*DIGIT
DIGIT        =  %x30-39
                ; a digit between O and 9, inclusive

For readability purposes, it is RECOMMENDED that all the TOI values in the list be given in increasing order. However a receiver MUST be able to handle non-monotonically increasing values. It is also RECOMMENDED to group the TOI equivalence elements together, at the end of the list, in increasing newTOI order. However a receiver MUST be able to handle lists of mixed TOI and TOI equivalence elements. Specifying a TOI equivalence for a given newTOI relieves the sender from specifying newTOI explicitly in the TOI list. However a receiver MUST be able to handle situations where the same TOI appears both in the TOI value and TOI equivalence lists. Finally, a given TOI value or TOI equivalence item MUST NOT be included multiple times in either list.

For instance, the following object list specifies that the current Carousel Instance is composed of 8 objects, and that TOIs 100 to 104 are equivalent to the TOIs 10 to 14 of Carousel Instance ID 2 and refer to the same objects:

97,98,99,(100=10/2),(101=11/2),(102=12/2),(103=13/2),(104=14/2)

or equivalently:

97-104,(100=10/2),(101=11/2),(102=12/2),(103=13/2),(104=14/2)

6.  Security Considerations

6.1.  Problem Statement

A content delivery system is potentially subject to attacks. Attacks may target:

• the network (to compromise the routing infrastructure, e.g., by creating congestion),
• the Content Delivery Protocol (CDP) (e.g., to compromise the normal behavior of FCAST) or
• the content itself (e.g., to corrupt the objects being transmitted).

These attacks can be launched either:

• against the data flow itself (e.g., by sending forged packets),
• against the session control parameters (e.g., by corrupting the session description, the CIO, the object meta-data, or the ALC/LCT control parameters), that are sent either in-band or out-of-band, or
• against some associated building blocks (e.g., the congestion control component).

In the following sections we provide more details on these possible attacks and sketch some possible counter-measures.

6.2.  Attacks Against the Data Flow

Let us consider attacks against the data flow first. At least, the following types of attacks exist:

• attacks that are meant to give access to a confidential object (e.g., in case of a non-free content) and
• attacks that try to corrupt the object being transmitted (e.g., to inject malicious code within an object, or to prevent a receiver from using an object, which is a kind of Denial of Service (DoS)).

6.2.1.  Access to Confidential Objects

Access control to the object being transmitted is typically provided by means of encryption. This encryption can be done over the whole object (e.g., by the content provider, before submitting the object to FCAST), or be done on a packet per packet basis (e.g., when IPSec/ESP is used [RFC4303] (Kent, S., “IP Encapsulating Security Payload (ESP),” December 2005.)). If confidentiality is a concern, it is RECOMMENDED that one of these solutions be used.

6.2.2.  Object Corruption

Protection against corruptions (e.g., in case of forged packets) is achieved by means of a content integrity verification/sender authentication scheme. This service can be provided at the object level, but in that case a receiver has no way to identify which symbol(s) is(are) corrupted if the object is detected as corrupted. This service can also be provided at the packet level. In this case, after removing all corrupted packets, the file may be in some cases recovered. Several techniques can provide this content integrity/sender authentication service:

• at the object level, the object can be digitally signed (with public key cryptography), for instance by using RSASSA-PKCS1-v1_5 [RFC3447] (Jonsson, J. and B. Kaliski, “Public-Key Cryptography Standards (PKCS) #1: RSA Cryptography Specifications Version 2.1,” February 2003.). This signature enables a receiver to check the object integrity, once this latter has been fully decoded. Even if digital signatures are computationally expensive, this calculation occurs only once per object, which is usually acceptable;
• at the packet level, each packet can be digitally signed. A major limitation is the high computational and transmission overheads that this solution requires (unless perhaps if Elliptic Curve Cryptography (ECC) is used). To avoid this problem, the signature may span a set of packets (instead of a single one) in order to amortize the signature calculation. But if a single packets is missing, the integrity of the whole set cannot be checked;
• at the packet level, a Group Message Authentication Code (MAC) [RFC2104] (Krawczyk, H., Bellare, M., and R. Canetti, “HMAC: Keyed-Hashing for Message Authentication,” February 1997.) scheme can be used, for instance by using HMAC-SHA-1 with a secret key shared by all the group members, senders and receivers. This technique creates a cryptographically secured digest of a packet that is sent along with the packet. The Group MAC scheme does not create prohibitive processing load nor transmission overhead, but it has a major limitation: it only provides a group authentication/integrity service since all group members share the same secret group key, which means that each member can send a forged packet. It is therefore restricted to situations where group members are fully trusted (or in association with another technique as a pre-check);
• at the packet level, Timed Efficient Stream Loss-Tolerant Authentication (TESLA) [RFC4082] (Perrig, A., Song, D., Canetti, R., Tygar, J., and B. Briscoe, “Timed Efficient Stream Loss-Tolerant Authentication (TESLA): Multicast Source Authentication Transform Introduction,” June 2005.) is an attractive solution that is robust to losses, provides a true authentication/integrity service, and does not create any prohibitive processing load or transmission overhead. Yet checking a packet requires a small delay (a second or more) after its reception;
• at the packet level, IPSec/AH [RFC4302] (Kent, S., “IP Authentication Header,” December 2005.) (possibly associated to IPSec/ ESP) can be used to protect all the packets being exchanged in a session.

Techniques relying on public key cryptography (digital signatures and TESLA during the bootstrap process, when used) require that public keys be securely associated to the entities. This can be achieved by a Public Key Infrastructure (PKI), or by a PGP Web of Trust, or by pre-distributing securely the public keys of each group member.

Techniques relying on symmetric key cryptography (Group MAC) require that a secret key be shared by all group members. This can be achieved by means of a group key management protocol, or simply by pre-distributing securely the secret key (but this manual solution has many limitations).

It is up to the developer and deployer, who know the security requirements and features of the target application area, to define which solution is the most appropriate. In any case, whenever there is any concern of the threat of file corruption, it is RECOMMENDED that at least one of these techniques be used.

6.3.  Attacks Against the Session Control Parameters and Associated Building Blocks

Let us now consider attacks against the session control parameters and the associated building blocks. The attacker has at least the following opportunities to launch an attack:

• the attack can target the session description,
• the attack can target the FCAST CIO,
• the attack can target the meta-data of an object,
• the attack can target the ALC/LCT parameters, carried within the LCT header or
• the attack can target the FCAST associated building blocks.

The latter one is particularly true with the multiple rate congestion control protocol which may be required.

The consequences of these attacks are potentially serious, since they can compromise the behavior of content delivery system or even compromise the network itself.

6.3.1.  Attacks Against the Session Description

An FCAST receiver may potentially obtain an incorrect Session Description for the session. The consequence of this is that legitimate receivers with the wrong Session Description are unable to correctly receive the session content, or that receivers inadvertently try to receive at a much higher rate than they are capable of, thereby possibly disrupting other traffic in the network.

To avoid these problems, it is RECOMMENDED that measures be taken to prevent receivers from accepting incorrect Session Descriptions. One such measure is the sender authentication to ensure that receivers only accept legitimate Session Descriptions from authorized senders. How these measures are archived is outside the scope of this document since this session description is usually carried out-of-band.

6.3.2.  Attacks Against the FCAST CIO

Corrupting the FCAST CIO is one way to create a Denial of Service attack. For example, the attacker can set the "Complete" flag to make the receivers believe that no further modification will be done.

It is therefore RECOMMENDED that measures be taken to guarantee the integrity and to check the sender's identity of the CIO. To that purpose, one of the counter-measures mentioned above (Section 6.2.2 (Object Corruption)) SHOULD be used. These measures will either be applied on a packet level, or globally over the whole CIO object. When there is no packet level integrity verification scheme, it is RECOMMENDED to digitally sign the CIO.

6.3.3.  Attacks Against the Object Meta-Data

Corrupting the object meta-data is another way to create a Denial of Service attack. For example, the attacker changes the MD5 sum associated to a file. This possibly leads a receiver to reject the files received, no matter whether the files have been correctly received or not. When the meta-data are appended to the object, corrupting the meta-data means that the Compound Object will be corrupted.

It is therefore RECOMMENDED that measures be taken to guarantee the integrity and to check the sender's identity of the Compound Object. To that purpose, one of the counter-measures mentioned above (Section 6.2.2 (Object Corruption)) SHOULD be used. These measures will either be applied on a packet level, or globally over the whole Compound Object. When there is no packet level integrity verification scheme, it is RECOMMENDED to digitally sign the Compound Object.

6.3.4.  Attacks Against the ALC/LCT and NORM Parameters

By corrupting the ALC/LCT header (or header extensions) one can execute attacks on the underlying ALC/LCT implementation. For example, sending forged ALC packets with the Close Session flag (A) set one can lead the receiver to prematurely close the session. Similarly, sending forged ALC packets with the Close Object flag (B) set one can lead the receiver to prematurely give up the reception of an object. The same comments can be made for NORM.

It is therefore RECOMMENDED that measures be taken to guarantee the integrity and to check the sender's identity of each ALC or NORM packet received. To that purpose, one of the counter-measures mentioned above (Section 6.2.2 (Object Corruption)) SHOULD be used.

6.3.5.  Attacks Against the Associated Building Blocks

Let us first focus on the congestion control building block that may be used in an ALC or NORM session. A receiver with an incorrect or corrupted implementation of the multiple rate congestion control building block may affect the health of the network in the path between the sender and the receiver. That may also affect the reception rates of other receivers who joined the session.

When congestion control is applied with FCAST, it is therefore RECOMMENDED that receivers be required to identify themselves as legitimate before they receive the Session Description needed to join the session. If authenticating a receiver does not prevent this latter to launch an attack, it will enable the network operator to identify him and to take counter-measures. This authentication can be made either toward the network operator or the session sender (or a representative of the sender) in case of NORM. The details of how it is done are outside the scope of this document.

When congestion control is applied with FCAST, it is also RECOMMENDED that a packet level authentication scheme be used, as explained in Section 6.2.2 (Object Corruption). Some of them, like TESLA, only provide a delayed authentication service, whereas congestion control requires a rapid reaction. It is therefore RECOMMENDED [RMT‑PI‑ALC] (Luby, M., Watson, M., and L. Vicisano, “Asynchronous Layered Coding (ALC) Protocol Instantiation,” November 2008.) that a receiver using TESLA quickly reduces its subscription level when the receiver believes that a congestion did occur, even if the packet has not yet been authenticated. Therefore TESLA will not prevent DoS attacks where an attacker makes the receiver believe that a congestion occurred. This is an issue for the receiver, but this will not compromise the network since no congestion actually occurred. Other authentication methods that do not feature this delayed authentication could be preferred, or a group MAC scheme could be used in parallel to TESLA to reduce the probability of this attack.

6.4.  Other Security Considerations

Lastly, we note that the security considerations that apply to, and are described in, ALC [RMT‑PI‑ALC] (Luby, M., Watson, M., and L. Vicisano, “Asynchronous Layered Coding (ALC) Protocol Instantiation,” November 2008.), LCT [RMT‑BB‑LCT] (Luby, M., Watson, M., and L. Vicisano, “Layered Coding Transport (LCT) Building Block,” March 2009.), NORM [RMT‑PI‑NORM] (Adamson, B., Bormann, C., Handley, M., and J. Macker, “Negative-acknowledgment (NACK)-Oriented Reliable Multicast (NORM) Protocol,” June 2009.) and FEC [RFC5052] (Watson, M., Luby, M., and L. Vicisano, “Forward Error Correction (FEC) Building Block,” August 2007.) also apply to FCAST as FCAST builds on those specifications. In addition, any security considerations that apply to any congestion control building block used in conjunction with FCAST also applies to FCAST. Finally, the security discussion of [RMT‑SEC] (Roca, V., Adamson, B., and H. Asaeda, “Security and Reliable Multicast Transport Protocols: Discussions and Guidelines,” July 2009.) also applies here.

7.  IANA Considerations

This document requires a IANA registration for the following attributes:

Object meta-data format (MDFmt): All implementations MUST support format 0 (default).

Object Meta-Data Encoding (MDENC): All implementations MUST support value 0 (plain-text, default) and value 1 (gzip).

8.  Acknowledgments

The authors are grateful to the authors of [ALC‑00] (Luby, M., Gemmell, G., Vicisano, L., Crowcroft, J., and B. Lueckenhoff, “Asynchronous Layered Coding: a Scalable Reliable Multicast Protocol,” March 2000.) for specifying the first version of FCAST/ALC. The authors are also grateful to Gorry Fairhurst for his valuable comments.

9.  References

9.1. Normative References

9.2. Informative References

Appendix A.  FCAST Examples

A.1.  Basic Examples

 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 0 |1|0| 0 | 0 |                   39                          |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|            Checksum           |                               |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+                               |
.                                                               .
.       meta-data ASCII null terminated string (33 bytes)       .
.                                                               .
+                                               +-+-+-+-+-+-+-+-+
|                                               |    Padding    |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
.                                                               .
.                         Object data                           .
.                                                               .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Figure 4 (Compound Object Example.) shows a regular Compound Object where the meta-data ASCII string, in HTTP/1.1 meta-information format (MDFmt=0) contains:

Content-Location: example.txt <CR-LF>

This string is 33 bytes long, including the NULL-termination character. There is no gzip encoding of the meta-data (MDEnc=0) and there is no Content-Length information either since this length can easily be calculated by the receiver as the FEC OTI transfer length minus the header length. Finally, the checksum encompasses the whole Compound Object (G=1).

 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 0 |1|0| 0 | 0 |                    6                          |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|            Checksum           |            Padding            |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
.                                                               .
.                         Object data                           .
.                                                               .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Figure 5 (Compound Object Example with no Meta-Data.) shows a Compound Object without any meta-data. The fact there is no meta-data is indicated by the value 6 of the Header Length field.

Figure 6 (Example of CIO, in case of a static session.) shows an example CIO object, in the case of a static FCAST session, i.e., a session where the set of objects is set once and for all.

 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|  0  |1| 0 | 0 |                4                              |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
.                                                               .
.                Object List string                             .
.                                                               .
.                                               +-+-+-+-+-+-+-+-+
.                                               |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

The object list contains the following string:

1,2,3,100-104,200-203,299

There are therefore a total of 3+5+4+1 = 13 objects in the carousel instance, and therefore in the FCAST session. There is no meta-data associated to this CIO. The session being static and composed of a single Carousel Instance, the sender did not feel the necessity to carry a Carousel Instance ID meta-data.

A.2.  FCAST/NORM with NORM_INFO Examples

In case of FCAST/NORM, the FCAST Compound Object meta-data (or a subset of it) can be carried as part of a NORM_INFO message, as a new Compound Object that does not contain any Compound Object Data. In the following example we assume that the whole meta-data is carried in such a message for a certain Compound Object. Figure 7 (NORM_INFO containing FCAST Compound Object Header) shows an example NORM_INFO message that contains the FCAST Compound Object Header and meta-data as its payload. In this example, the first 16 bytes are the NORM_INFO base header, the next 12 bytes are a NORM EXT_FTI header extension containing the FEC Object Transport Information for the associated object, and the remaining bytes are the FCAST Compound Object Header and meta-data. Note that "padding" MUST NOT be used and that the FCAST checksum only encompasses the Compound Object Header (G=0).

0                   1                   2                   3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|version| type=1|  hdr_len = 7  |          sequence             |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                           source_id                           |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|          instance_id          |     grtt      |backoff| gsize |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|     flags     |  fec_id = 5   |     object_transport_id       |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|   HET = 64    |    HEL = 3    |                               |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+                               +
|                      Transfer Length (L)                      |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|   Encoding Symbol Length (E)  | MaxBlkLen (B) |     max_n     |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 0 |0|0| 0 | 0 |                   39                          |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|            Checksum           |                               |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+                               +
.                                                               .
.       meta-data ASCII null terminated string (33 bytes)       .
.                                                               .
+                                               +-+-+-+-+-+-+-+-+
|                                               |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

The NORM_INFO message shown in Figure 7 (NORM_INFO containing FCAST Compound Object Header) contains the EXT_FTI header extension to carry the FEC OTI. In this example, the FEC OTI format is that of the Reed-Solomon FEC coding scheme for fec_id = 5 as described in [RFC5510] (Lacan, J., Roca, V., Peltotalo, J., and S. Peltotalo, “Reed-Solomon Forward Error Correction (FEC) Schemes,” April 2009.). Other alternatives for providing the FEC OTI would have been to either include it directly in the meta-data of the FCAST Compound Header, or to include an EXT_FTI header extension to all NORM_DATA packets (or a subset of them). Note that the NORM "Transfer_Length" is the total length of the associated FCAST Compound Object.

The FCAST Compound Object in this example does contain the same meta-data and is formatted as in the example of Figure 4 (Compound Object Example.). With the combination of the FEC_OTI and the FCAST meta-data, the NORM protocol and FCAST application have all of the information needed to reliably receive and process the associated object. Indeed, the NORM protocol provides rapid (NORM_INFO has precedence over the associated object content), reliable delivery of the NORM_INFO message and its payload, the FCAST Compound Object Header.

Authors' Addresses