Hybrid key exchange in JOSE and COSE

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶

This Internet-Draft will expire on 8 April 2024.¶

Copyright Notice

Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶

Table of Contents

1. Introduction

The migration to PQC is unique in the history of modern digital cryptography in that neither the traditional algorithms nor the post-quantum algorithms are fully trusted to protect data for the required data lifetimes. The traditional algorithms, such as RSA and elliptic curve, will fall to quantum cryptalanysis, while the post-quantum algorithms face uncertainty about the underlying mathematics, compliance issues, unknown vulnerabilities, hardware and software implementations that have not had sufficient maturing time to rule out classical cryptanalytic attacks and implementation bugs.¶

During the transition from traditional to post-quantum algorithms, there is a desire or a requirement for protocols that use both algorithm types. [I-D.ietf-pquip-pqt-hybrid-terminology] defines terminology for the Post-Quantum and Traditional Hybrid Schemes.¶

This document gives a construction for hybrid key exchange in Javascript Object Signing and Encryption (JOSE) and CBOR Object Signing and Encryption (COSE). The overall design approach is a simple, "hash and concatenation" based approach to use a “hybrid” shared secret.¶

2. Conventions and Definitions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶

This document makes use of the terms defined in [I-D.ietf-pquip-pqt-hybrid-terminology]. For the purposes of this document, it is helpful to be able to divide cryptographic algorithms into two classes:¶

"Traditional Algorithm": An asymmetric cryptographic algorithm based on integer factorisation, finite field discrete logarithms or elliptic curve discrete logarithms. In the context of JOSE, examples of traditional key exchange algorithms include Elliptic Curve Diffie-Hellman Ephemeral Static [RFC6090] [RFC8037]. In the context of COSE, examples of traditional key exchange algorithms include Ephemeral-Static (ES) DH and Static-Static (SS) DH [RFC9052].¶

"Post-Quantum Algorithm": An asymmetric cryptographic algorithm that is believed to be secure against attacks using quantum computers as well as classical computers. Examples of PQC key exchange algorithms include Kyber.¶

"Hybrid" key exchange, in this context, means the use of two key exchange algorithms based on different cryptographic assumptions, e.g., one traditional algorithm and one Post-Quantum algorithm, with the purpose of the final shared secret key being secure as long as at least one of the component key exchange algorithms remains unbroken. It is referred to as PQ/T Hybrid Scheme in [I-D.ietf-pquip-pqt-hybrid-terminology].¶

PQ/T Hybrid Key Encapsulation Mechanism: A Key Encapsulation mechanism (KEM) made up of two or more component KEM algorithms where at least one is a post-quantum algorithm and at least one is a traditional algorithm.¶

3. Construction

Building a PQ/T hybrid KEM requires a secure function which combines the output of both component KEMs to form a single output. Several IETF protocols are adding PQ/T hybrid KEM mechanisms as part of their overall post-quantum migration strategies, examples include TLS 1.3 [I-D.ietf-tls-hybrid-design], IKEv2 [RFC9370].¶

The migration to PQ/T Hybrid KEM calls for performing multiple key encapsulations in parallel and then combining their outputs to derive a single shared secret. It is compatible with NIST SP 800-56Cr2 [SP800-56C] when viewed as a key derivation function. The hybrid scheme defined in this document is the combination of Traditional and Post-Quantum Algorithms. The Key agreement Traditional and Post-Quantum Algorithms are used in parallel to generate shared secrets. The two shared secrets are hashed and concatenated together and used as the shared secret in JOSE and COSE.¶

The JSON Web Algorithms (JWA) [RFC7518] in Section 4.6 defines two ways using the key agreement result. When Direct Key Agreement is employed, the shared secret established through the ECDH algorithm will be the content encryption key (CEK). When Key Agreement with Key Wrapping is employed, the shared secret established through the ECDH algorithm will wrap the CEK. Simiarly, COSE in Sections 8.5.4 and 8.5.5 [RFC9052] define the Direct Key Agreement and Key Agreement with Key Wrap classes. If multiple recipients are needed, then the version with key wrap is used.¶

It is essential to note that in the PQ/T hybrid KEM mode, one needs to apply Fujisaki-Okamoto [FO] transform or its variant [HHK] on the PQC KEM part to ensure that the overall scheme is IND-CCA2 secure as mentioned in [I-D.ietf-tls-hybrid-design]. The FO transform is performed using the KDF such that the PQC KEM shared secret achieved is IND-CCA2 secure. In this case, one can re-use the PQC KEM public keys but depending on some upper bound that must adhered to.¶

4. KEM Combiner

The specification uses the KEM combiner defined in [I-D.ounsworth-cfrg-kem-combiners] that takes in two or more shared secrets and returns a combined shared secret. In case of PQ/T Hybrid KEM, the shared secrets are the output of the traditional key exchange (Key Agreement with Elliptic Curve Diffie-Hellman Ephemeral Static defined in Section 4.6 of [RFC9370] for JOSE and Key Agreement with Ephemeral-Static (ES) Diffie-Hellman (DH) defined in Section 6.3.1 of [RFC9053] for COSE) and PQC KEM. The KEM combiner function is defined in Section 3 of [I-D.ounsworth-cfrg-kem-combiners]. The KDF and Hash functions will be KMAC and SHA3 and the counter will be initialized with a value of 0x00000001 (Section 4 of [I-D.ounsworth-cfrg-kem-combiners]). The KMAC functions used with the PQ/T hybrid algorithms are specified in the table below:¶

        +==============+=========+=========+
        | PQ/T hybrid algorithm  | KDF     |
        +========================+=========+
        | x25519-ES_kyber512     | KMAC128 |
        +------------------------+---------+
        | secp384r1-ES_kyber768  | KMAC256 |
        +------------------------+---------+
        | x25519-ES_kyber768     | KMAC256 |
        +-----------------------+----------+
        | secp256r1-ES_kyber512 |  KMAC128 |
        +------------------------+---------+

                         Table 1

KMAC is defined in NIST SP 800-185 [SP800-185]. The KMAC(K, X, L, S) parameters are instantiated as follows:¶

• K: context-specific string. In case of JOSE, the context-specific string will be set to concat("JOSE_Post_Quantum_Traditional_Hybrid", "", Name of the PQ/T hybrid algorithm). In case of COSE, the context-specific string will be set to concat("COSE_Post_Quantum_Traditional_Hybrid", "-", Name of the PQ/T hybrid algorithm). For example, concat("JOSE_Post_Quantum_Traditional_Hybrid", "", "x25519-ES_kyber512") = "JOSE_Post_Quantum_Traditional_Hybrid_x25519-ES_kyber512".¶

• X: concat(0x00000001, k_1, ... , k_n, fixedInfo). The fixedInfo parameter is a fixed-format string containing context-specific information.¶

• L: length of the output key in bits.¶

• S: utf-8 string "KDF".¶

In the case of a traditional key exchange algorithm (e.g., x25519, secp384r1) since there is no associated ciphertext present when calculating the constant-length input key (k1) defined in Section 3.2 of [I-D.ounsworth-cfrg-kem-combiners], the key derivation process defined in Section 4.6.2 of [RFC7518] for JOSE would be used to construct k. However, in case of COSE, the HKDF (HMAC based Key Derivation Function) defined in Section 5 of [RFC9053] would be used. The HKDF algorithm leverages HMAC SHA-256 as the underlying PRF (Pseudo-Random function) for secp256r1 and x25519, and HMAC SHA-384 for secp384r1. The context structure defined in Section 5.2 of [RFC9053], salt and secret from DH key agreement are used as inputs to the HKDF. In case of JOSE, the fixedInfo parameter will carry the JOSE context specific data defined in Section 4.6.2 of [RFC7518]. In case of COSE, the fixedInfo parameter will carry the COSE context structure defined in Section 5.2 of [RFC9053]. Note that the result of an ECDH key agreement process does not provide a uniformly random secret and it needs to be run through a KDF in order to produce a usable key (see Section 6.3.1 of [RFC9053]).¶

The KEM combiner instantiation of the first entry of Table 1 would be:¶

  ss = KMAC128("COSE_Post_Quantum_Traditional_Hybrid_X25519-ES_kyber512", "0x00000001 ||
                HKDF-256(DH-Shared-Secret, salt, context) ||
                ct_1 || rlen(ct_1) || ss_1 || rlen(ss_1) || context" , 128, "KDF")

Where ss_1 is shared secret and its corresponding ciphertext ct_1 generated from kemEncaps(pk). If ss_1 or ct_1 are not guaranteed to have constant length, rlen encoded length is appended when concatenating as discussed in Section 3.2 of [I-D.ounsworth-cfrg-kem-combiners].¶

In Direct Key Agreement mode, the output of the KEM combiner MUST be a key of the same length as that used by encryption algorithm. In Key Agreement with Key Wrapping mode, the output of the KEM combiner MUST be a key of the length needed for the specified key wrap algorithm.¶

5. KEM PQC Algorithms

The National Institute of Standards and Technology (NIST) started a process to solicit, evaluate, and standardize one or more quantum-resistant public-key cryptographic algorithms, as seen here. Said process has reached its first announcement in July 5, 2022, which stated which candidates to be standardized for KEM:¶

• Key Encapsulation Mechanisms (KEMs): CRYSTALS-Kyber: Kyber is a module learning with errors (MLWE)-based key encapsulation mechanism.¶

NIST announced as well that they will be opening a fourth round to standardize an alternative KEM, and a call for new candidates for a post-quantum signature algorithm.¶

6. Hybrid Key Representation with JOSE

The parameter "kty" MUST be present and set to "OKP" defined in Section 2 of [RFC7518] for expressing the cryptographic keys for PQ/T Hybrid KEM, the following rules apply:¶

• The parameter "alg" MUST be specified, and its value MUST be one of the values specified in the table below:¶

          +===============================+===================================+
          | alg                           | Description                       |
          +===============================+===================================+
          | x25519-ES_kyber512            | Curve25519 elliptic curve +       |
          |                               | Kyber512 parameter                |
          |                               | Direct Key Agreement              |
          +===============================+===================================+
          | secp384r1-ES_kyber768         | P-384 + Kyber768 parameter        |
          |                               | Direct Key Agreement              |
          +===============================+===================================+
          | x25519-ES_kyber768            | Curve25519 elliptic curve +       |
          |                               | Kyber768 parameter                |
          |                               | Direct Key Agreement              |
          +===============================+===================================+
          | secp256r1-ES_kyber512         | P-256 +  Kyber512 parameter       |
          |                               | Direct Key Agreement              |
          +===============================+===================================+
          | x25519-ES_kyber512+A128KW     | Curve25519 elliptic curve +       |
          |                               | Kyber512 parameter + CEK wrapped  |
          |                               | with "A128KW"                     |
          +========+==============---=====+===================================+
          | secp384r1-ES_kyber768+A128KW  | P-384 + Kyber768 parameter        |
          |                               |  + CEK wrapped with "A128KW"      |
          +========+===================+======================================+
          | x25519-ES_kyber768+A128KW     | Curve25519 elliptic curve +       |
          |                               | Kyber768 parameter + CEK wrapped  |
          |                               | with "A128KW"                     |
          +========+======================+===================================+
          | secp256r1-ES_kyber512+A128KW  | P-256 +  Kyber512 parameter       |
          |                               | + CEK wrapped with "A128KW"       |
          +===============================+===================================+
          | x25519-ES_kyber512+A256KW     | Curve25519 elliptic curve +       |
          |                               | Kyber512 parameter + CEK wrapped  |
          |                               | with "A256KW"                     |
          +===============================+===================================+
          | secp384r1-ES_kyber768+A256KW  | P-384 + Kyber768 parameter        |
          |                               |  + CEK wrapped  with "A256KW"     |
          +===============================+===================================+
          | x25519-ES_kyber768+A256KW     | Curve25519 elliptic curve +       |
          |                               | Kyber768 parameter + CEK wrapped  |
          |                               | with "A256KW"                     |
          +===============================+===================================+
          | secp256r1-ES_kyber512+A256KW  | P-256 +  Kyber512 parameter       |
          |                               | + CEK wrapped with "A256KW"       |
          +===============================+===================================+
  
                             Table 2
  

  ¶

• The parameter "kem" MUST be present and set to the PQC KEM algorithm.¶

• The parameter "kem-pk" MUST be present and contains the PQC KEM public key encoded using the base64url [RFC4648] encoding.¶

• The parameter "kem-sk" MUST be present for private key and contains the PQC KEM private key encoded using the base64url encoding. This parameter MUST NOT be present for public key.¶

• The parameter "kem-ct" MUST be present for KEM ciphertext encoded using the base64url [RFC4648] encoding.¶

• The parameter "crv" MUST be present and contains the Elliptic Curve Algorithm used (from the "JSON Web Key Elliptic Curve" registry).¶

• The parameter "x" MUST be present and contains the x coordinate for the Elliptic Curve point encoded using the base64url [RFC4648] encoding.¶

• The parameter "y" MUST be present and contains the y coordinate for the Elliptic Curve point encoded using the base64url [RFC4648] encoding. This parameter is not present for "X25519".¶

• The parameter "d" MUST be present for private keys and contains the Elliptic Curve Algorithm private key encoded using the base64url encoding. This parameter MUST NOT be present for public keys.¶

In Table 2, "A128KW" and "A256KW" are AES Key Wrap with 128-bit key and 256-bit key respectively. Encryption of the plaintext is accomplished with AES symmetric key cryptography. In Table 2, 'ES' indicates that the traditional key agreement process is performed using an ephemeral key on the sender's side, and for each key agreement operation, the sender will generate a new ephemeral key.¶

The specification allows a small number of "known good" PQ/T hybrid algorithms listed in Table 2 instead of allowing arbitrary combinations of traditional and PQC algorithms. It follows the recent trend in protocols to only allow a small number of "known good" configurations that make sense, instead of allowing arbitrary combinations of individual configuration choices that may interact in dangerous ways.¶

  "kem"            PQC KEM Applied
  Kyber512            Kyber512
  Kyber768            Kyber768

 {"kty":"OKP",
  "crv":"P-256",
  "x":"alice_eph_public_key_x",
  "y":"alice_eph_public_key_y",
  "d":"alice_eph_private_key"
 }

 {"kty":"OKP",
  "kem": "kyber512",
  "kem-pk":"bob_kyber_public_key",
  "kem-sk":"bob_kyber_private_key"
  "crv":"P-256",
  "x":"bob_public_key_x",
  "y":"bob_public_key_y",
  "d":"bob_private_key"
 }

 {"alg":"secp256r1-ES_kyber512",
  "enc":"A128GCM",
  "apu":"QWxpY2U",  // base64url encoding of the UTF-8 string "Alice"
  "apv":"Qm9i",    // base64url encoding of the UTF-8 string "Bob"
  "epk":
   {"kty":"OKP",
    "crv":"P-256",
    "x":"alice_eph_public_key_x",
    "y":"alice_eph_public_key_y",
   }
 }

7. Hybrid Key Representation with COSE

The approach taken here matches the work done to support secp256k1 in JOSE and COSE in [RFC8812]. The following table maps terms between JOSE and COSE for Key Type Parameters.¶

    +======================+========================================+==+
    | Name                 | Value | Description                       |
    +======================+===========================================+
    | crv                  | -1    | EC used                           |
    +----------------------+-------------------------------------------+
    | d                    | -4    | Private key                       |
    +----------------------+-------------------------------------------+
    | x                    | -2    | x coordinate for the public key   |
    +----------------- ----+-------------------------------------------+
    | y                    | -3    | y coordinate for the public key   |
    +---------------- -----+-------------------------------------------+
    | kem                  | TBD2  | PQC KEM Algorithm                 |
    +----------------------+-------------------------------------------+
    | kem-pk               | TBD3  | PQC KEM Public Key                |
    +----------------------+-------------------------------------------+
    | kem-sk               | TBD4  | PQC KEM Private Key               |
    +----------------------+-------------------------------------------+
    | kem-ct               | TBD5  | PQC KEM ciphertext                |
    +----------------------+-------------------------------------------+

                             Table 3

The following table maps terms between JOSE and COSE for PQ/T Hybrid KEM.¶

    +==============+===================+====================+============================+
    | Name                          | Value  | Description                 | Recommended |
    +===================+===========+========+=============================+=============+
    | x25519-ES_kyber512            | TBD10  | Curve25519 elliptic curve + | No          |
    |                               |        | Kyber512 parameter          |             |
    +-------------------------------+--------+-----------------------------+-------------+
    | secp384r1-ES_kyber768         | TBD11  | P-384 + Kyber768 parameter  | No          |
    |                               |        |                             |             |
    +-------------------------------+--------+-----------------------------+-------------+
    | x25519-ES_kyber768            | TBD12  | Curve25519 elliptic curve   | No          |
    |                               |        | + Kyber768 parameter        |             |
    +-------------------------------+--------+-----------------------------+-------------+
    | secp256r1-ES_kyber512         | TBD13  | P-256 + Kyber512 parameter  | No          |
    |                               |        |                             |             |
    +-------------------------------+--------+-----------------------------+-------------+
    | x25519-ES_kyber512+A128KW     | TBD14  | Curve25519 elliptic curve + | No          |
    |                               |        | Kyber512 parameter +        |             |
    |                               |        | CEK wrapped with "A128KW"   |             |
    +-------------------------------+--------+-----------------------------+-------------+
    | secp384r1-ES_kyber768+A128KW  | TBD15  | P-384 + Kyber768 parameter  | No          |
    |                               |        | + CEK wrapped with "A128KW" |             |
    +-------------------------------+--------+-----------------------------+-------------+
    | x25519-ES_kyber768+A128KW     | TBD16  | Curve25519 elliptic curve   | No          |
    |                               |        | + Kyber768 parameter        |             |
    |                               |        | + CEK wrapped with "A128KW" |             |
    +-------------------------------+--------+-----------------------------+-------------+
    | secp256r1-ES_kyber512+A128KW  | TBD17  | P-256 + Kyber512 parameter  | No          |
    |                               |        | + CEK wrapped with "A128KW" |             |
    +-------------------------------+--------+-----------------------------+-------------+
    | x25519-ES_kyber512+A256KW     | TBD18  | Curve25519 elliptic curve + | No          |
    |                               |        | Kyber512 parameter +        |             |
    |                               |        | CEK wrapped with "A256KW"   |             |
    +-------------------------------+--------+-----------------------------+-------------+
    | secp384r1-ES_kyber768+A256KW  | TBD19  | P-384 + Kyber768 parameter  | No          |
    |                               |        | + CEK wrapped with "A256KW" |             |
    +-------------------------------+--------+-----------------------------+-------------+
    | x25519-ES_kyber768+A256KW     | TBD20  | Curve25519 elliptic curve   | No          |
    |                               |        | + Kyber768 parameter        |             |
    |                               |        | + CEK wrapped with "A256KW" |             |
    +-------------------------------+--------+-----------------------------+-------------+
    | secp256r1_-ES_kyber512+A256KW | TBD21  | P-256 + Kyber512 parameter  | No          |
    |                               |        | + CEK wrapped with "A256KW" |             |
    +-------------------------------+--------+-----------------------------+-------------+


                                   Table 4

The following table maps terms between JOSE and COSE for PQC KEM algorithms.¶

    +==============+=======+====================+===============================+
    | Name                 | Value | Description                 | Recommended  |
    +==============+=======+====================+=============--------==========+
    | Kyber512             | TBD7  | Kyber512                    | No           |
    |                      |       |                             |              |
    +---------------------+--------+-----------------------------+--------------+
    | Kyber768             | TBD9  | Kyber768                    | No           |
    |                      |       |                             |              |
    +---------------------+--------+-----------------------------+--------------+

                                   Table 5

This example uses the following parameters:¶

• Algorithm for payload encryption: AES-GCM-128¶

• IV: 0x26, 0x68, 0x23, 0x06, 0xd4, 0xfb, 0x28, 0xca, 0x01, 0xb4, 0x3b, 0x80¶

• Algorithm for content key distribution: secp256r1_kyber512¶

• KID: "kid-4"¶

The COSE_Encrypt structure¶

   96(
     [
       / protected h'a10101' / << {
           / alg / 1:1 / AES-GCM 128 /
         } >>,
       / unprotected / {
         / iv / 5:h'26682306D4FB28CA01B43B80'
       },
      / null because of detached ciphertext /
      null,
       / recipients / [
         [
           / protected h'Assuming -50 is assigned' / << {
               / alg / 1:-50 / secp256r1-ES_kyber512 /
             } >>,
           / unprotected / {
             / ephemeral / -1:{
               / kty / 1:1 /OKP/,
               / crv / -1:1 /secp256r1 or P-256/,
               / x / -2:h'415A8ED270C4B1F10B0A2D42B28EE6028CE25D74552CB4291A4069A2E989B0F6',
               / y / -3:h'CCC9AAF60514B9420C80619A4FF068BC1D77625BA8C90200882F7D5B73659E76'
             },
             / kid / 4:'kid-10'
           }
         ]
       ]
     ]
   )

                Figure 1: COSE_Encrypt Example for secp256r1-ES_kyber512

8. Security Considerations

Security considerations from [RFC7748] and [I-D.ounsworth-cfrg-kem-combiners] apply here. The shared secrets computed in the hybrid key exchange should be computed in a way that achieves the "hybrid" property: the resulting secret is secure as long as at least one of the component key exchange algorithms is unbroken.¶

PQC KEMs used in the manner described in this document MUST explicitly be designed to be secure in the event that the public key is reused, such as achieving IND-CCA2 security. Kyber has such security properties.¶

9. IANA Considerations

Recommended:  Does the IETF have a consensus recommendation to use
  the algorithm?  The legal values are 'Yes', 'No', and
  'Deprecated'.

Acknowledgments

Thanks to Mike Ounsworth for the discussion and comments.¶

Authors' Addresses