JMAP extension for S/MIME signing and encryption

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶

This Internet-Draft will expire on 19 July 2024.¶

Copyright Notice

Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶

Table of Contents

4. Extension to Email/set for S/MIME signing and/or encryption

[RFC8621] defines Email/set method for creating new email messages. This document defines the following additional Email/set argument that can be used to create S/MIME signed and/or encrypted messages:¶

smimeOperations: SmimeOperation[]|null (default: null). The list of S/MIME operations to perform, in the order specified. If none are specified, or if this property is omitted, no S/MIME operation is performed. If multiple messages are specified in the "create" argument, these operations apply to each of them.¶

headersToObscure: "String[String]"|"none"|null (default: null). If smimeOperations contains an "encrypt" operation, this specifies the list of header fields to obscure, as well as their obscured representation (see [draft-ietf-lamps-header-protection]). If the value is the string "none", no header field should be obscured. If the value is null, or if this property is omitted, the set of header fields to be protected is left up to the JMAP server. If any header fields are explicitly specified in this attribute, the headersToProtect argument MUST also contain that header field, or be set to "none" or null.¶

headersToProtect: "String[]"|"all"|"none"|null (default: null). The list of header fields which should be protected by the smimeOperations specified. If the value is "all", all header fields of the original message should be protected. If the value is "none", no header fields should be protected. If the value is null, or if this property is omitted, the set of header fields to be protected is left up to the JMAP server.¶

The SmimeOperation object contains the following attributes:¶

• operation: "String". S/MIME operation to perform. This document only defines 2 possible values: "sign" and "encrypt". Future documents might add further values.¶

• options: "SignOptions"|"EncryptOptions"|null (default: null). Options controlling aspects of S/MIME signing or S/MIME encryption. If this attributes includes SignOptions when the operation attribute has the value "encrypt" or if this attributes includes EncryptOptions when the operation attribute has the value "sign", then JMAP server MUST return the invalidArguments error code.¶

The SignOptions object contains the following attributes:¶

• algorithm: "String"|null (default: null). The value represents the signature algorithm that the JMAP server should use to sign this message. If the algorithm is unspecified (the value "null") or this property is omitted, the JMAP server chooses the most appropriate algorithm to use. If the algorithm name specified is unrecognized by the server, it MUST return the unknownSignatureAlgo error code. [[Register unknownSignatureAlgo error code with IANA.]] Currently specified algorithms are "ecdsa_secp256r1_sha256", "ed25519", "rsa_pkcs1_sha256", "rsa_pss_pss_sha256". [[Alexey: probably need to define a new IANA registry or reference an existing one.]]¶

• opaque: "Boolean" (default: true). If the value is "true", this requests the JMAP server to use application/pkcs7-mime [RFC8551] media type for S/MIME signing, otherwise multipart/signed [RFC1847] media type.¶

The EncryptOptions object contains the following attributes:¶

• keyEncryptionAlgorithm: "String"|null (default: null). The value represents the key encryption algorithm that the JMAP server should use when encrypting this message. If the algorithm is unspecified, this property is omitted, or an unrecognized algorithm string is specified, the JMAP server chooses the most appropriate algorithm to use. [[Need a new IANA registry or a link to an existing one here.]]¶

• contentEncryptionAlgorithm: "String"|null (default: null). The value represents the data encryption algorithm that the JMAP server should use when encrypting this message. If the algorithm is unspecified, this property is omitted, or an unrecognized algorithm string is specified, the JMAP server chooses the most appropriate algorithm to use. [[Need a new IANA registry or a link to an existing one here.]]¶

When the operation attribute value is "sign", JMAP server constructs the S/MIME signed message from the original message (if this is the first operation) or the result of the previous operation, taking into considerations the SignOptions object (if present) or its defaults. The signature's private key/certificate is associated with the email address in the Sender header field, if present; otherwise, it is associated with the email address in the From header field, if present. If multiple addresses are present in one of these header fields, or there is more than one Sender/From header field, the server SHOULD reject the Email/set as invalid with the "invalidEmail" error code; otherwise, it MUST take the first address in the last Sender/From header field. If JMAP account is not authorized to sign message as the selected sender (as above), it SHOULD return "signedSenderNotAllowed" error code.¶

When the operation is "encrypt", JMAP server constructs the S/MIME encrypted message from the original message (if this is the first operation) or the result of the previous operation, taking into considerations the EncryptOptions object (if present) or its defaults. This is done by encapsulating the message inside application/pkcs7-mime [RFC8551] media type. The message MUST be encrypted to the sender and all To/Cc/Bcc recipients. This extension assumes that there is some kind of per user or organizational addressbook, that can be used to lookup public keys of recipients. If lookup of a particular public key fails, or results in an expired or revoked certificate, the Email/set operation MUST fail with the "validEncryptionKeyNotFound" error code.¶

(Note that this extension doesn't allow management of private keys/certificates. How private keys are managed or configured for a particular user is out of scope for this document.)¶

      [[ "Email/set", {
        "accountId": "ue150411c",
        "create": {
          "k192": {
            "mailboxIds": {
              "2ea1ca41b38e": true
            },
            "keywords": {
              "$seen": true,
              "$draft": true
            },
            "from": [{
              "name": "Joe Bloggs",
              "email": "joe@example.com"
            }],
            "subject": "World domination",
            "receivedAt": "2021-07-07T01:03:11Z",
            "sentAt": "2021-07-10T11:03:11+10:00",
            "bodyStructure": {
              "type": "text/plain",
              "partId": "bd48",
              "header:Content-Language": "en"
            },
            "bodyValues": {
              "bd48": {
                "value": "I have the most brilliant plan.  Let me tell
                  you all about it.",
                "isTruncated": false
              }
            }
          }
        },
        "smimeOperations": [{
            "operation": "sign",
            "options": {
              "opaque": false,
              "headersToProtect": "all"
            }
          },
          {
            "operation": "encrypt"
          }
        ]
      }, "0" ]]

This will result in the following response:

      [[ "Email/set", {
        "accountId": "ue150411c",
        "oldState": "780823",
        "newState": "780839",
        "created": {
          "k192": {
            "id": "Mf40b5f831efa7233b9eb1c7f",
            "blobId": "Gf40b5f831efa7233b9eb1c7f8f97d84eeeee64f7",
            "threadId": "Td957e72e89f516dc",
            "size": 5096
          }
        },
        ...
      }, "0" ]]

5. Extension to Email/get and Email/query for S/MIME decryption

[RFC8621] defines Email/get method for retrieving information about email messages. This document defines the following additional request arguments of the "bodyProperties" object that can be used to facilitate decryption of S/MIME encrypted messages:¶

• smimeBlobId: "Id|null". The id representing the raw octets of the decrypted contents of the part. When processing this request argument, the server first removes the Content-Transfer-Encoding (see then "blobId" request argument in RFC 8621). If the Content-Transfer-Encoding is supported by the server, the content is then S/MIME decrypted. The resulting Id can be used in Email/parse method to import the decrypted message. If the body part is not encrypted, the returned smimeBlobId attribute has the same value as the "blobId" attribute.¶

[[Extend Email/get with isSigned and isEncrypted Boolean server set properties?]]¶

    [[ "Email/get", {
        "ids": [ "f123u986" ],
        "properties": [ "threadId", "mailboxIds", "from", "subject",
          "receivedAt", "htmlBody" ],
        "bodyProperties": [ "partId", "smimeBlobId", "size", "type" ]
      }, "#1" ]]

This will result in the following response:

    [[ "Email/get", {
     "accountId": "abc",
     "state": "41234123231",
     "list": [
       {
         "id": "f123u986",
         "threadId": "cb1314a",
         "mailboxIds": { "da123c": true },
         "from": [{ "name": "Mice Ace", "email": "mike@example.com" }],
         "subject": "Dinner on Saturday?",
         "receivedAt": "2023-03-09T14:12:00Z",

         "htmlBody": [{
           "partId": "1",
           "smimeBlobId": "B841623871",
           "size": 120537,
           "type": "text/html"
         }]
       }
     ]
   }, "#1" ]]

[RFC8621] defines Email/query method for searching for email messages. This document defines the following additional request arguments to the *FilterCondition* object that can be used to search for S/MIME signed and/or encrypted messages:¶

• isEncrypted: "Boolean" (default: false)¶

  If isEncrypted is true, then an Email matches this condition if it has a "Cryptographic Envelope" that contains an encryption (PKCS7 enveloped-data or PKCS7 authEnveloped-data) "Cryptographic Layer". [[Alexey: Do we want to limit this to S/MIME encryption and not OpenPGP?]]¶

• isNotEncrypted: "Boolean" (default: false)¶

  If isNotEncrypted is true, then an Email matches this condition if it doesn't have a "Cryptographic Envelope" or it has a "Cryptographic Envelope", but it doesn't include any encryption (PKCS7 enveloped-data or PKCS7 authEnveloped-data) "Cryptographic Layer".¶

• isSigned: "Boolean" (default: false)¶

  If isSigned is true, then an Email matches this condition if it has a "Cryptographic Envelope" that contain a Multipart Signed or PKCS7 signed-data "Cryptographic Layer". [[Alexey: Do we want to limit this to S/MIME signing and not OpenPGP?]]¶

• isNotSigned: "Boolean" (default: false)¶

  If isNotSigned is true, then an Email matches this condition if it doesn't have a "Cryptographic Envelope" or it has a "Cryptographic Envelope", but it doesn't include any Multipart Signed or PKCS7 signed-data "Cryptographic Layer".¶

7. Security Considerations

This JMAP extension assumes trust between the user and the JMAP server for purposes of signing and encrypting messages on user's behalf.¶

This JMAP extension also relies on access to user's (or organization's) addressbook which contain up-to-date certificates for recipients.¶

This JMAP extension doesn't support management of user's private keys and corresponding certificates.¶

Author's Address