| Internet-Draft | MoQ relay for deadline | March 2023 |
| Cui, et al. | Expires 13 September 2023 | [Page] |
This draft specifies the behavior of MoQ relays for delivering media before the deadline to decrease end-to-end latency and save transport costs in media transmission. To achieve this, the draft introduces deadline-aware actions prioritizing media streams with earlier deadlines, ensuring timely transmission while minimizing costs.¶
This note is to be removed before publishing as an RFC.¶
Status information for this document may be found at https://datatracker.ietf.org/doc/draft-ma-moq-relay-for-deadline/.¶
Source for this draft and an issue tracker can be found at https://github.com/STAR-Tsinghua/draft-moq-for-deadline.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 13 September 2023.¶
Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
Media over QUIC (MoQ) is a transport system designed to provide efficient media transport. However, some use cases, such as live streaming, online meetings, and gaming, require the client to receive their media before a specific time, referred to as the 'deadline.' Exceeding the deadline results in dropped data, which can increase latency and negatively affect user experience.¶
To address this issue, a deliver-before-deadline transport service can be provided, which is the goal of the Deadline-aware Transport Protocol (DTP) proposed in [I-D.draft-shi-quic-dtp]. DTP leverages stream-level scheduling, active stream canceling, and redundancy coding to prioritize urgent data and prevent outdated data from blocking later data.¶
This document proposes the behavior of deadline-aware actions on MoQ relay nodes, extending the basic MoQ relay to provide deliver-before-deadline transmission. The relay design utilizes scheduling, data canceling, and redundancy coding to decrease queuing time, prevent unnecessary re-transmission of overdue data, and ultimately reduce end-to-end latency. By providing better data delivery strategies, MoQ relays with deadline-aware actions can significantly enhance overall user experience in media transport.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
+===========================+
: /=======\ :
: Deadline :Block 1: :
: -aware :DDL:xxx: :
: Canceling \=======/ :
/-------\ : ^ :
|Block 1| : : :
|DDL:xxx| : +---------+ : :
+---------+ \-------/ : |Deadline | : :
|Publisher|-----------:--->| -aware |==: :
+---------+ /-------\ : | Relay | :
|Block 2| : +---------+ :
|DDL:yyy| : | /-----------\ :
\-------/ : | | Block 2 | :
: | | DDL:yyy | :
: | |-----------| :
: | | Redundancy| :
: | | Coding | :
: v \-----------/ :
: +---------+ :
: |Deadline | : +----------+
: | -aware |------------:--->|Subscriber|
: | Relay | /-------\: +----------+
: +---------+ |Block 2|:
: |DDL:yyy|:
: \-------/:
+===========================+
Deadline-aware MoQ Relay nodes
Figure 1 illustrates the fundamental architecture of Deadline-aware MoQ. This architecture involves the extension of MoQ Publishers and Subscribers, which transport block-like data and add 'Deadline' as a component of Metadata within the header. Relay nodes within this system are equipped with deadline-aware actions, including deadline-aware scheduling, canceling, and redundancy coding. The relay may schedule the data blocks, cancel the overdue ones, and add redundancy code to avoid re-transmission. The relays receive block-like data from the publisher, transfer between relays, make deadline-aware actions, and transmit it to the subscriber.¶
The main focus of this draft is the extension of MoQ relays or the 'Deadline-aware MoQ Relay.' The Deadline-aware MoQ Relay SHOULD send data in a block-like style to enable deadline-aware actions. A block is a data unit in the MoQ system, like a video frame. A block can be reliably delivered, partially delivered, or dropped depending on the application logic. A block SHOULD contain a block ID in the block's header.¶
Depending on the MoQ implementation, the relay implementation may map the block transmission to different mechanisms of QUIC, such as matching a block to multiple QUIC datagrams or a single QUIC stream. Deadline-aware MoQ Relay SHOULD support various MoQ transport implementations. When the relay receives data without deadline-related information from the endpoint, it MAY convert the data into block type or forward it without utilizing any deadline-aware actions.¶
The Deadline-aware MoQ Relay SHOULD support various relay topologies, as discussed in [I-D.draft-shi-moq-design-space-analysis-of-moq]. Each relay topology may require a different MoQ architecture or implementation. Therefore, the deadline-aware actions should act as a plugin that relays can quickly implement regardless of the topology and architecture.¶
For Deadline-aware MoQ Relay, data block metadata is required to enable deadline-aware actions. Both the endpoint and the relay SHOULD attach the following metadata to each data block when using deadline-aware actions:¶
The relay SHOULD maintain track of the metadata of a block until the block misses its deadline.¶
Additionally, if the endpoint does not offer metadata in the header of a data block, relays MAY implement other mechanisms to acquire and synchronize deadline-related metadata.¶
e.x. The specific methodology for encapsulating metadata needs to wait until the MoQ specification is standardized.¶
When implementing deadline-aware actions, the Deadline-aware MoQ Relay can utilize the block metadata for scheduling blocks at the block-level. The scheduler SHOULD minimize the total time of queuing and try to meet the deadline requirements of as many high-priority blocks as possible.¶
If a block misses its deadline, Deadline-aware MoQ Relay MAY cancel it. In such cases, the endpoints SHOULD be able to accept partially received data and not request for data re-transmission when a block is dropped. Additionally, the relays MAY inform the endpoints and other relays about the cancellation of these blocks.¶
To improve reliability and decrease latency, Deadline-aware MoQ Relay MAY introduce redundancy data to blocks close to their deadline or transmitted over a network with a high loss rate. This redundancy can help to prevent the need for re-transmission. If the first relay adds redundancy coding to the data, other relay nodes in the network may benefit from it.¶
When redundancy coding is enabled, at least two nodes SHOULD implement a pair of encoder and decoder that comply with the redundancy coding method. The endpoint MAY also implement a redundancy encoder and decoder to utilize the relay's redundancy coding function fully.¶
The first node that encodes the data with redundancy coding MUST add redundancy-related information to the metadata of the data block.¶
In situations where a data block is dropped by a relay due to a missed deadline or other reasons, sending an explicit dropping message to other relays and the endpoint can be useful to notify them of the loss of data. The dropping message may include information about the block, such as its ID and metadata.¶
Further discussion is required to determine if the relay should implement a buffer for data blocks during forwarding and how such a buffer should be implemented. This buffer may be used for re-transmission purposes and may benefit users with larger delay tolerance, among other potential uses.¶
To enable accurate deadline-aware actions, it is recommended that all endpoints and relays perform clock synchronization.¶
Access to the metadata of the Deadline-aware MoQ Relay SHOULD be limited to selected relays. The relay SHOULD NOT access the content of the data block.¶
This document has no IANA actions.¶
We sincerely thank Wei Cao for his advice and revisions to this draft.¶