WebRTC-HTTP ingestion protocol (WHIP)

4.1.1. HTTP PATCH request usage

The WHIP client MAY perform trickle ICE or ICE restarts by sending an HTTP PATCH request as per [RFC5789] to the WHIP session URL, with a body containing a SDP fragment with media type "application/trickle-ice-sdpfrag" as specified in [RFC8840] carrying the relevant ICE information.¶

If the HTTP PATCH to the WHIP session has a content type different than "application/trickle-ice-sdpfrag", the WHIP session MUST reject the HTTP PATCH request with a "415 Unsupported Media Type" error response. If the SDP fragment is malformed, the WHIP session MUST reject the HTTP PATCH with a "400 Bad Request" error response.¶

If the WHIP session supports either Trickle ICE or ICE restarts, but not both, it MUST return a "422 Unprocessable Content" response for the HTTP PATCH requests that are not supported as per Section 15.5.21 of [RFC9110].¶

The WHIP client MAY send overlapping HTTP PATCH requests to one WHIP session. Consequently, as those HTTP PATCH requests may be received out-of-order by the WHIP session, if WHIP session supports ICE restarts, it MUST generate a unique strong entity-tag identifying the ICE session as per Section 8.8.3 of [RFC9110], being OPTIONAL otherwise. The initial value of the entity-tag identifying the initial ICE session MUST be returned in an ETag header field in the "201 Created" response to the initial POST request to the WHIP endpoint.¶

WHIP clients SHOULD NOT use entity-tag validation when matching a specific ICE session is not required, such as for example when initiating a DELETE request to terminate a session. WHIP sessions MUST ignore any entity-tag value sent by the WHIP client when ICE session matching is not required, as in the HTTP DELETE request.¶

4.1.2. Trickle ICE

Depending on the Trickle ICE support on the WHIP client, the initial offer by the WHIP client MAY be sent after the full ICE gathering is complete with the full list of ICE candidates, or it MAY only contain local candidates (or even an empty list of candidates) as per [RFC8845]. For the purpose of reducing setup times, when using Trickle ICE the WHIP client SHOULD send the SDP offer as soon as possible, containing either locally gathered ICE candidates or an empty list of candidates.¶

In order to simplify the protocol, the WHIP session cannot signal additional ICE candidates to the WHIP client after the SDP answer has been sent. The WHIP endpoint SHALL gather all the ICE candidates for the media server before responding to the client request and the SDP answer SHALL contain the full list of ICE candidates of the media server.¶

As the WHIP client needs to know the WHIP session URL associated with the ICE session in order to send a PATCH request containing new ICE candidates, it MUST wait and buffer any gathered candidates until the "201 Created" HTTP response to the initial POST request is received. In order to lower the HTTP traffic and processing time required the WHIP client SHOULD send a single aggregated HTTP PATCH request with all the buffered ICE candidates once the response is received. Additionally, if ICE restarts are supported by the WHIP session, the WHIP client needs to know the entity-tag associated with the ICE session in order to send a PATCH request containing new ICE candidates, so it MUST also wait and buffer any gathered candidates until it receives the HTTP response with the new entity-tag value to the last PATCH request performing an ICE restart.¶

WHIP clients generating the HTTP PATCH body with the SDP fragment and its subsequent processing by WHIP sessions MUST follow to the guidelines defined in Section 4.4 of [RFC8840] with the following considerations:¶

• As per [RFC8829], only m-sections not marked as bundle-only can gather ICE candidates, so given that the "max-bundle" policy is being used, the SDP fragment will contain only the offerer-tagged m-line of the bundle group.¶

• The WHIP client MAY exclude ICE candidates from the HTTP PATCH body if they have already been confirmed by the WHIP session with a successful HTTP response to a previous HTTP PATCH request.¶

If the WHIP session is using entity-tags for identifying the ICE sessions in explained in Section 4.1.1, a WHIP client sending a PATCH request for performing trickle ICE MUST include an "If-Match" header field with the latest known entity-tag as per Section 13.1.1 of [RFC9110]. When the PATCH request is received by the WHIP session, it MUST compare the indicated entity-tag value with the current entity-tag of the resource as per Section 13.1.1 of [RFC9110] and return a "412 Precondition Failed" response if they do not match. If the HTTP PATCH request does not contain an "If-Match" header the WHIP session MUST return an "428 Precondition Required" response as per Section 3 of [RFC6585].¶

When a WHIP session receives a PATCH request that adds new ICE candidates without performing an ICE restart, it MUST return a "204 No Content" response without a body and MUST NOT include an ETag header in the response. If the WHIP session does not support a candidate transport or is not able to resolve the connection address, it MUST silently discard the candidate and continue processing the rest of the request normally.¶

PATCH /session/id HTTP/1.1
Host: whip.example.com
If-Match: "xyzzy"
Content-Type: application/trickle-ice-sdpfrag
Content-Length: 576

a=group:BUNDLE 0 1
m=audio 9 UDP/TLS/RTP/SAVPF 111
a=mid:0
a=ice-ufrag:EsAw
a=ice-pwd:P2uYro0UCOQ4zxjKXaWCBui1
a=candidate:1387637174 1 udp 2122260223 192.0.2.1 61764 typ host generation 0 ufrag EsAw network-id 1
a=candidate:3471623853 1 udp 2122194687 198.51.100.2 61765 typ host generation 0 ufrag EsAw network-id 2
a=candidate:473322822 1 tcp 1518280447 192.0.2.1 9 typ host tcptype active generation 0 ufrag EsAw network-id 1
a=candidate:2154773085 1 tcp 1518214911 198.51.100.2 9 typ host tcptype active generation 0 ufrag EsAw network-id 2
a=end-of-candidates

HTTP/1.1 204 No Content

4.1.3. ICE Restarts

As defined in [RFC8839], when an ICE restart occurs, a new SDP offer/answer exchange is triggered. However, as WHIP does not support renegotiation of non-ICE related SDP information, a WHIP client will not send a new offer when an ICE restart occurs. Instead, the WHIP client and WHIP session will only exchange the relevant ICE information via an HTTP PATCH request as defined in Section 4.1.1 and MUST assume that the previously negotiated non-ICE related SDP information still apply after the ICE restart.¶

When performing an ICE restart, the WHIP client MUST include the updated "ice-pwd" and "ice-ufrag" in the SDP fragment of the HTTP PATCH request body as well as the new set of gathered ICE candidates as defined in [RFC8840]. Similar what is defined in Section 4.1.2, as per [RFC8829] only m-sections not marked as bundle-only can gather ICE candidates, so given that the "max-bundle" policy is being used, the SDP fragment will contain only the offerer-tagged m-line of the bundle group. A WHIP client sending a PATCH request for performing ICE restart MUST contain an "If-Match" header field with a field-value "*" as per Section 13.1.1 of [RFC9110].¶

[RFC8840] states that an agent MUST discard any received requests containing "ice-pwd" and "ice-ufrag" attributes that do not match those of the current ICE Negotiation Session, however, any WHIP session receiving an updated "ice-pwd" and "ice-ufrag" attributes MUST consider the request as performing an ICE restart instead and, if supported, SHALL return a "200 OK" with an "application/trickle-ice-sdpfrag" body containing the new ICE username fragment and password and a new set of ICE candidates for the WHIP session. Also, the "200 OK" response for a successful ICE restart MUST contain the new entity-tag corresponding to the new ICE session in an ETag response header field and MAY contain a new set of ICE candidates for the media server.¶

As defined in Section 4.4.1.1.1 of [RFC8839] the set of candidates after an ICE restart may include some, none, or all of the previous candidates for that data stream and may include a totally new set of candidates. So after performing a successful ICE restart, both the WHIP client and the WHIP session MUST replace the previous set of remote candidates with the new set exchanged in the HTTP PATCH request and response, discarding any remote ICE candidate not present on the new set. Both the WHIP client and the WHIP session MUST ensure that the HTTP PATCH requests and response bodies include the same 'ice-options,' 'ice-pacing,' and 'ice-lite' attributes as those used in the SDP offer or answer.¶

If the ICE restart request cannot be satisfied by the WHIP session, the resource MUST return an appropriate HTTP error code and MUST NOT terminate the session immediately and keep the existing ICE session. The WHIP client MAY retry performing a new ICE restart or terminate the session by issuing an HTTP DELETE request instead. In any case, the session MUST be terminated if the ICE consent expires as a consequence of the failed ICE restart as per Section 5.1 of [RFC7675].¶

In case of unstable network conditions, the ICE restart HTTP PATCH requests and responses might be received out of order. In order to mitigate this scenario, when the client performs an ICE restart, it MUST discard any previous ICE username and passwords fragments and ignore any further HTTP PATCH response received from a pending HTTP PATCH request. WHIP clients MUST apply only the ICE information received in the response to the last sent request. If there is a mismatch between the ICE information at the WHIP client and at the WHIP session (because of an out-of-order request), the STUN requests will contain invalid ICE information and will be dropped by the receiving side. If this situation is detected by the WHIP client, it MUST send a new ICE restart request to the server.¶

PATCH /session/id HTTP/1.1
Host: whip.example.com
If-Match: "*"
Content-Type: application/trickle-ice-sdpfrag
Content-Length: 82

a=ice-options:trickle ice2
a=group:BUNDLE 0 1
m=audio 9 UDP/TLS/RTP/SAVPF 111
a=mid:0
a=ice-ufrag:ysXw
a=ice-pwd:vw5LmwG4y/e6dPP/zAP9Gp5k
a=candidate:1387637174 1 udp 2122260223 192.0.2.1 61764 typ host generation 0 ufrag EsAw network-id 1
a=candidate:3471623853 1 udp 2122194687 198.51.100.2 61765 typ host generation 0 ufrag EsAw network-id 2
a=candidate:473322822 1 tcp 1518280447 192.0.2.1 9 typ host tcptype active generation 0 ufrag EsAw network-id 1
a=candidate:2154773085 1 tcp 1518214911 198.51.100.2 9 typ host tcptype active generation 0 ufrag EsAw network-id 2

HTTP/1.1 200 OK
ETag: "abccd"
Content-Type: application/trickle-ice-sdpfrag
Content-Length: 252

a=ice-lite
a=ice-options:trickle ice2
a=group:BUNDLE 0 1
m=audio 9 UDP/TLS/RTP/SAVPF 111
a=mid:0
a=ice-ufrag:289b31b754eaa438
a=ice-pwd:0b66f472495ef0ccac7bda653ab6be49ea13114472a5d10a
a=candidate:1 1 udp 2130706431 198.51.100.1 39132 typ host
a=end-of-candidates

4.2.1. SDP Bundle

Both the WHIP client and the WHIP endpoint SHALL support [RFC9143] and use "max-bundle" policy as defined in [RFC8829]. The WHIP client and the media server MUST support multiplexed media associated with the BUNDLE group as per Section 9 of [RFC9143]. In addition, per [RFC9143] the WHIP client and media server SHALL use RTP/RTCP multiplexing for all bundled media. In order to reduce the network resources required at the media server, both The WHIP client and WHIP endpoints MUST include the "rtcp-mux-only" attribute in each bundled "m=" sections as per Section 3 of [RFC8858].¶

4.2.2. Single MediaStream

WHIP only supports a single MediaStream as defined in [RFC8830] and therefore all "m=" sections MUST contain an "msid" attribute with the same value. The MediaStream MUST contain at least one MediaStreamTrack of any media kind and it MUST NOT have two or more than MediaStreamTracks for the same media (audio or video). However, it would be possible for future revisions of this spec to allow more than a single MediaStream or MediaStreamTrack of each media kind, so in order to ensure forward compatibility, if the number of audio and or video MediaStreamTracks or number of MediaStreams are not supported by the WHIP endpoint, it MUST reject the HTTP POST request with a "406 Not Acceptable" error response.¶

4.2.3. No partially successful answers

The WHIP endpoint SHOULD NOT reject individual "m=" sections as per Section 5.3.1 of [RFC8829] in case there is any error processing the "m=" section, but reject the HTTP POST request with a "406 Not Acceptable" error response to prevent having partially successful ingest sessions which can be misleading to end users.¶

4.2.4. DTLS setup role and SDP "setup" attribute

When a WHIP client sends an SDP offer, it SHOULD insert an SDP "setup" attribute with an "actpass" attribute value, as defined in [RFC8842]. However, if the WHIP client only implements the DTLS client role, it MAY use an SDP "setup" attribute with an "active" attribute value. If the WHIP endpoint does not support an SDP offer with an SDP "setup" attribute with an "active" attribute value, it SHOULD reject the request with a "422 Unprocessable Entity" response.¶

NOTE: [RFC8842] defines that the offerer must insert an SDP "setup" attribute with an "actpass" attribute value. However, the WHIP client will always communicate with a media server that is expected to support the DTLS server role, in which case the client might choose to only implement support for the DTLS client role.¶

4.2.5. Trickle ICE and ICE restarts

The media server SHOULD support full ICE, unless it is connected to the Internet with an IP address that is accessible by each WHIP client that is authorized to use it, in which case it MAY support only ICE lite. The WHIP client MUST implement and use full ICE.¶

Trickle ICE and ICE restarts support is OPTIONAL for both the WHIP clients and media servers as explained in Section 4.1.¶

4.5.1. Bearer token authentication

WHIP endpoints and sessions MAY require the HTTP request to be authenticated using an HTTP Authorization header field with a Bearer token as specified in Section 2.1 of [RFC6750]. WHIP clients MUST implement this authentication and authorization mechanism and send the HTTP Authorization header field in all HTTP requests sent to either the WHIP endpoint or session except the preflight OPTIONS requests for CORS.¶

The nature, syntax, and semantics of the bearer token, as well as how to distribute it to the client, is outside the scope of this document. Some examples of the kind of tokens that could be used are, but are not limited to, JWT tokens as per [RFC6750] and [RFC8725] or a shared secret stored on a database. The tokens are typically made available to the end user alongside the WHIP endpoint URL and configured on the WHIP clients (similar to the way RTMP URLs and Stream Keys are distributed).¶

WHIP endpoints and sessions could perform the authentication and authorization by encoding an authentication token within the URLs for the WHIP endpoints or sessions instead. In case the WHIP client is not configured to use a bearer token, the HTTP Authorization header field must not be sent in any request.¶

6.3.1. Specification Template

Namespace ID:¶

• The Namespace ID "whip" has been assigned.¶

Registration Information:¶

• Version: 1¶

• Date: TBD¶

Declared registrant of the namespace:¶

• Registering organization: The Internet Engineering Task Force.¶

• Designated contact: A designated expert will monitor the WHIP public mailing list, "wish@ietf.org".¶

Declaration of Syntactic Structure:¶

• The Namespace Specific String (NSS) of all URNs that use the "whip" Namespace ID shall have the following structure: urn:ietf:params:whip:{type}:{name}:{other}.¶

• The keywords have the following meaning:¶

  • type: The entity type. This specification only defines the "ext" type.¶

  • name: A required US-ASCII string that conforms to the URN syntax requirements (see [RFC8141]) and defines a major namespace of a WHIP protocol extension. The value MAY also be an industry name or organization name.¶

  • other: Any US-ASCII string that conforms to the URN syntax requirements (see [RFC8141]) and defines the sub-namespace (which MAY be further broken down in namespaces delimited by colons) as needed to uniquely identify an WHIP protocol extension.¶

Relevant Ancillary Documentation:¶

• None¶

Identifier Uniqueness Considerations:¶

• The designated contact shall be responsible for reviewing and enforcing uniqueness.¶

Identifier Persistence Considerations:¶

• Once a name has been allocated, it MUST NOT be reallocated for a different purpose.¶

• The rules provided for assignments of values within a sub-namespace MUST be constructed so that the meanings of values cannot change.¶

• This registration mechanism is not appropriate for naming values whose meanings may change over time.¶

Process of Identifier Assignment:¶

• Namespace with type "ext" (e.g., "urn:ietf:params:whip:ext") is reserved for IETF-approved WHIP specifications.¶

Process of Identifier Resolution:¶

• None specified.¶

Rules for Lexical Equivalence:¶

• No special considerations; the rules for lexical equivalence specified in [RFC8141] apply.¶

Conformance with URN Syntax:¶

• No special considerations.¶

Validation Mechanism:¶

• None specified.¶

Scope:¶

• Global.¶

6.4.1. Registration Procedure

The IETF has created a mailing list, "wish@ietf.org", which can be used for public discussion of WHIP protocol extensions proposals prior to registration. Use of the mailing list is strongly encouraged. The IESG has appointed a designated expert RFC8126 who will monitor the wish@ietf.org mailing list and review registrations.¶

Registration of new "ext" type URNs (in the namespace "urn:ietf:params:whip:ext") belonging to a WHIP Protocol Extension MUST be documented in a permanent and readily available public specification, in sufficient detail so that interoperability between independent implementations is possible and reviewed by the designated expert as per Section 4.6 of [BCP26] . An RFC is REQUIRED for the registration of new value data types that modify existing properties. An RFC is also REQUIRED for registration of WHIP Protocol Extensions URNs that modify WHIP Protocol Extensions previously documented in an existing RFC.¶

The registration procedure begins when a completed registration template, defined in the sections below, is sent to iana@iana.org. Decisions made by the designated expert can be appealed to an Applications and Real Time (ART) Area Director, then to the IESG. The normal appeals procedure described in [BCP9] is to be followed.¶

Once the registration procedure concludes successfully, IANA creates or modifies the corresponding record in the WHIP Protocol Extension registry.¶

An RFC specifying one or more new WHIP Protocol Extension URNs MUST include the completed registration templates, which MAY be expanded with additional information. These completed templates are intended to go in the body of the document, not in the IANA Considerations section. The RFC MUST include the syntax and semantics of any extension-specific attributes that may be provided in a Link header field advertising the extension.¶

6.4.2. Guidance for Designated Experts

The Designated Expert (DE) is expected to ascertain the existence of suitable documentation (a specification) as described in RFC8126 and to verify that the document is permanently and publicly available.¶

The DE is also expected to check the clarity of purpose and use of the requested registration.¶

Additionally, the DE must verify that any request for one of these registrations has been made available for review and comment within the IETF: the DE will post the request to the WebRTC Ingest Signaling over HTTPS (wish) Working Group mailing list (or a successor mailing list designated by the IESG).¶

If the request comes from within the IETF, it should be documented in an Internet-Draft. Lastly, the DE must ensure that any other request for a code point does not conflict with work that is active or already published within the IETF.¶

6.4.3. WHIP Protocol Extension Registration Template

A WHIP Protocol Extension URNs is defined by completing the following template:¶

• URN: A unique URN for the WHIP Protocol Extension (e.g., "urn:ietf:params:whip:ext:example:server-sent-events").¶

• Reference: A formal reference to the publicly available specification¶

• Name: A descriptive name of the WHIP Protocol Extension extension (e.g., "Sender Side events").¶

• Description: A brief description of the function of the extension, in a short paragraph or two¶

• Contact information: Contact information for the organization or person making the registration¶