| Internet-Draft | A UUID URN Namespace | February 2023 |
| Leach, et al. | Expires 20 August 2023 | [Page] |
This specification defines a Uniform Resource Name namespace for UUIDs (Universally Unique IDentifiers), also known as GUIDs (Globally Unique IDentifiers). A UUID is 128 bits long, and can guarantee uniqueness across space and time. UUIDs were originally used in the Apollo Network Computing System and later in the Open Software Foundation's (OSF) Distributed Computing Environment (DCE), and then in Microsoft Windows platforms.¶
This specification is derived from the DCE specification with the kind permission of the OSF (now known as The Open Group). Information from earlier versions of the DCE specification have been incorporated into this document.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 20 August 2023.¶
Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
This specification defines a Uniform Resource Name namespace for UUIDs (Universally Unique IDentifiers), also known as GUIDs (Globally Unique IDentifiers). A UUID is 128 bits long, and requires no central registration process.¶
The information here is meant to be a concise guide for those wishing to implement services using UUIDs as URNs [RFC8141]. Nothing in this document should be construed to override the DCE standards that defined UUIDs.¶
There is an ITU-T Recommendation and an ISO/IEC Standard [X667] that are derived from earlier versions of this document. Both sets of specifications have been aligned, and are fully technically compatible. In addition, a global registration function is being provided by the Telecommunications Standardization Bureau of ITU-T; for details see https://www.itu.int/en/ITU-T/asn1/Pages/UUID/uuids.aspx.¶
One of the main reasons for using UUIDs is that no centralized authority is required to administer them (although one format uses IEEE 802 node identifiers, others do not). As a result, generation on demand can be completely automated, and used for a variety of purposes. The UUID generation algorithm described here supports very high allocation rates of up to 10 million per second per machine if necessary, so that they could even be used as transaction IDs.¶
UUIDs are of a fixed size (128 bits), which is reasonably small compared to other alternatives. This lends itself well to sorting, ordering, and hashing of all sorts, storing in databases, simple allocation, and ease of programming in general.¶
Since UUIDs are unique and persistent, they make excellent Uniform Resource Names. The unique ability to generate a new UUID without a registration process allows for UUIDs to be one of the URNs with the lowest minting cost.¶
Many things have changed in the time since UUIDs were originally created. Modern applications have a need to create and utilize UUIDs as the primary identifier for a variety of different items in complex computational systems, including but not limited to database keys, file names, machine or system names, and identifiers for event-driven transactions.¶
One area in which UUIDs have gained popularity is as database keys. This stems from the increasingly distributed nature of modern applications. In such cases, "auto increment" schemes often used by databases do not work well, as the effort required to coordinate sequential numeric identifiers across a network can easily become a burden. The fact that UUIDs can be used to create unique, reasonably short values in distributed systems without requiring coordination makes them a good alternative, but UUID versions 1-5 lack certain other desirable characteristics:¶
Due to the aforementioned issues, many widely distributed database applications and large application vendors have sought to solve the problem of creating a better time-based, sortable unique identifier for use as a database key. This has lead to numerous implementations over the past 10+ years solving the same problem in slightly different ways.¶
While preparing this specification the following 16 different implementations were analyzed for trends in total ID length, bit Layout, lexical formatting/encoding, timestamp type, timestamp format, timestamp accuracy, node format/components, collision handling and multi-timestamp tick generation sequencing.¶
An inspection of these implementations and the issues described above has led to this document which attempts to adapt UUIDs to address these issues.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
The following abbreviations are used in this document:¶
Universally Unique Identifier¶
Uniform Resource Names¶
Augmented Backus-Naur Form¶
Cryptographically Secure Pseudo-Random Number Generator¶
Media Access Control¶
Most Significant Bit¶
Database Management System¶
Institute of Electrical and Electronics Engineers, Inc.¶
International Telecommunication Union¶
Message Digest 5¶
Secure Hash Algorithm 1¶
Coordinated Universal Time¶
This section is to be removed before publishing as an RFC.¶
draft-02¶
draft-01¶
draft-00¶
The UUID format is 16 octets (128 bits); the variant bits in conjunction with the version bits described in the next sections in determine finer structure. While discussing UUID formats and layout, bit definitions start at 0 and end at 127 while octets definitions start at 0 and end at 15.¶
UUIDs MAY be represented as binary data or integers. When in use with URNs or applications, any given UUID SHOULD be represented by the "hex-and-dash" string format consisting of multiple groups of upper or lowercase alphanumeric hex characters separated by single dashes/hyphens. When used with databases please refer to Section 6.12.¶
The formal definition of the UUID string representation is provided by the following (ABNF) [RFC5234].¶
UUID = 4hexOctet "-"
2hexOctet "-"
2hexOctet "-"
2hexOctet "-"
6hexOctet
hexOctet = HEXDIG HEXDIG
DIGIT = %x30-39
HEXDIG = DIGIT / "A" / "B" / "C" / "D" / "E" / "F"
¶
An example UUID using this textual representation from the previous table observed in Figure 1. Note that in this example the alphabetic characters may be all uppercase, all lowercase or mixed case as per [RFC5234], Section 2.3¶
f81d4fae-7dec-11d0-a765-00a0c91e6bf6
The same UUID from Figure 1 is represented in Binary Figure 2, Integer Figure 3 and as a URN Figure 4 defined by [RFC8141].¶
111110000001110101001111101011100111110111101100000100011101000\ 01010011101100101000000001010000011001001000111100110101111110110
329800735698586629295641978511506172918
urn:uuid:f81d4fae-7dec-11d0-a765-00a0c91e6bf6
The variant field determines the layout of the UUID. That is, the interpretation of all other bits in the UUID depends on the setting of the bits in the variant field. As such, it could more accurately be called a type field; we retain the original term for compatibility. The variant field consists of a variable number of the most significant bits of octet 8 of the UUID.¶
Table 1 lists the contents of the variant field, where the letter "x" indicates a "don't-care" value.¶
| Msb0 | Msb1 | Msb2 | Description |
|---|---|---|---|
| 0 | x | x | Reserved, NCS backward compatibility and includes Nil UUID as per Section 5.9. |
| 1 | 0 | x | The variant specified in this document. |
| 1 | 1 | 0 | Reserved, Microsoft Corporation backward compatibility. |
| 1 | 1 | 1 | Reserved for future definition and includes Max UUID as per Section 5.10. |
Interoperability, in any form, with variants other than the one defined here is not guaranteed, and is not likely to be an issue in practice.¶
Specifically for UUIDs in this document bits 64 and 65 of the UUID (bits 0 and 1 of octet 8) MUST be set to 1 and 0 as specified in row 2 of Table 1. Accordingly, all bit and field layouts avoid the use of these bits.¶
The version number is in the most significant 4 bits of octet 6 (bits 48 through 51 of the UUID).¶
Table 2 lists all of the versions for this UUID variant specified in this document.¶
| Msb0 | Msb1 | Msb2 | Msb3 | Version | Description |
|---|---|---|---|---|---|
| 0 | 0 | 0 | 0 | 0 | Unused |
| 0 | 0 | 0 | 1 | 1 | The Gregorian time-based UUID specified in this document. |
| 0 | 0 | 1 | 0 | 2 | Reserved for DCE Security version, with embedded POSIX UUIDs. |
| 0 | 0 | 1 | 1 | 3 | The name-based version specified in this document that uses MD5 hashing. |
| 0 | 1 | 0 | 0 | 4 | The randomly or pseudo-randomly generated version specified in this document. |
| 0 | 1 | 0 | 1 | 5 | The name-based version specified in this document that uses SHA-1 hashing. |
| 0 | 1 | 1 | 0 | 6 | Reordered Gregorian time-based UUID specified in this document. |
| 0 | 1 | 1 | 1 | 7 | Unix Epoch time-based UUID specified in this document. |
| 1 | 0 | 0 | 0 | 8 | Reserved for custom UUID formats specified in this document. |
| 1 | 0 | 0 | 1 | 9 | Reserved for future definition. |
| 1 | 0 | 1 | 0 | 10 | Reserved for future definition. |
| 1 | 0 | 1 | 1 | 11 | Reserved for future definition. |
| 1 | 1 | 0 | 0 | 12 | Reserved for future definition. |
| 1 | 1 | 0 | 1 | 13 | Reserved for future definition. |
| 1 | 1 | 1 | 0 | 14 | Reserved for future definition. |
| 1 | 1 | 1 | 1 | 15 | Reserved for future definition. |
An example version/variant layout for UUIDv4 follows the table where M represents the version placement for the hex representation of 4 (0100) and the N represents the variant placement for one of the four possible hex representation of variant 10x: 8 (1000), 9 (1001), A (1010), B (1011)¶
00000000-0000-4000-8000-000000000000 00000000-0000-4000-9000-000000000000 00000000-0000-4000-A000-000000000000 00000000-0000-4000-B000-000000000000 xxxxxxxx-xxxx-Mxxx-Nxxx-xxxxxxxxxxxx
To minimize confusion about bit assignments within octets and among differing versions, the UUID record definition is defined only in terms of fields that are integral numbers of octets. The fields are presented with the most significant one first.¶
In the absence of explicit application or presentation protocol specification to the contrary, each field is encoded with the Most Significant Byte first (known as network byte order).¶
UUID Version 1 is a time-based UUID featuring a 60-bit timestamp represented by Coordinated Universal Time (UTC) as a count of 100- nanosecond intervals since 00:00:00.00, 15 October 1582 (the date of Gregorian reform to the Christian calendar).¶
UUID Version 1 also features a clock sequence field which is used to help avoid duplicates that could arise when the clock is set backwards in time or if the node ID changes.¶
The node field consists of an IEEE 802 MAC address, usually the host address. For systems with multiple IEEE 802 addresses, any available one can be used. The lowest addressed octet (octet number 10) contains the global/local bit and the unicast/multicast bit, and is the first octet of the address transmitted on an 802.3 LAN.¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | time_low | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | time_mid | ver | time_high | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |var| clock_seq | node | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | node | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The least significant 32 bits of the 60 bit starting timestamp. Occupies bits 0 through 31 (octets 0-3)¶
The middle 16 bits of the 60 bit starting timestamp. Occupies bits 32 through 47 (octets 4-5)¶
The 4 bit version field as defined by Section 4.2 set to 0001. Occupies bits 48 through 51 of octet 6.¶
12 bits that will contain the most significant 12 bits from the 60 bit starting timestamp. Occupies bits 52 through 63 (octets 6-7)¶
The 2 bit variant field as defined by Section 4.1 set to 10. Occupies bits 64 and 65 of octet 8.¶
The 14-bits containing the clock sequence. Occupies bits 66 through 79 (octets 8-9).¶
48 bit spatially unique identifier Occupies bits 80 through 127 (octets 10-15)¶
For systems that do not have UTC available, but do have the local time, they may use that instead of UTC, as long as they do so consistently throughout the system. However, this is not recommended since generating the UTC from local time only needs a time zone offset.¶
If the clock is set backwards, or might have been set backwards (e.g., while the system was powered off), and the UUID generator can not be sure that no UUIDs were generated with timestamps larger than the value to which the clock was set, then the clock sequence has to be changed. If the previous value of the clock sequence is known, it can just be incremented; otherwise it should be set to a random or high-quality pseudo-random value.¶
Similarly, if the node ID changes (e.g., because a network card has been moved between machines), setting the clock sequence to a random number minimizes the probability of a duplicate due to slight differences in the clock settings of the machines. If the value of clock sequence associated with the changed node ID were known, then the clock sequence could just be incremented, but that is unlikely.¶
The clock sequence MUST be originally (i.e., once in the lifetime of a system) initialized to a random number to minimize the correlation across systems. This provides maximum protection against node identifiers that may move or switch from system to system rapidly. The initial value MUST NOT be correlated to the node identifier.¶
For systems with no IEEE address, a randomly or pseudo-randomly generated value may be used; see Section 6.8 and Section 6.9.¶
UUID Version 2 is known as DCE Security UUIDs [C309] and [C311]. As such the definition of these UUIDs are outside the scope of this specification.¶
UUID Version 3 is meant for generating UUIDs from "names" that are drawn from, and unique within, some "name space" as per Section 6.5.¶
UUIDv3 values are created by computing an MD5 [RFC1321] hash over a given name space value concatenated with the desired name value after both have been converted to a canonical sequence of octets in network byte order. This MD5 value is then used to populate all 128 bits of the UUID layout. The UUID version and variant then replace the respective bits as defined by Section 4.2 and Section 4.1.¶
Some common name space values have been defined via Appendix A.¶
Where possible UUIDv5 SHOULD be used in lieu of UUIDv3. For more information on MD5 security considerations see [RFC6151].¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | md5_high | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | md5_high | ver | md5_mid | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |var| md5_low | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | md5_low | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The first 48 bits of the layout are filled with the most significant, left-most 48 bits from the computed MD5 value.¶
The 4 bit version field as defined by Section 4.2 set to 0011¶
12 more bits of the layout consisting of the least significant, right-most 12 bits of 16 bits immediately following md5_high from the computed MD5 value.¶
The 2 bit variant field as defined by Section 4.1 set to 10¶
The final 62 bits of the layout immediately following the var field to be filled with the least-significant, right-most bits of the final 64 bits from the computed MD5 value.¶
The version 4 UUID is meant for generating UUIDs from truly-random or pseudo-random numbers.¶
An implementation may generate 128 bits of random random data which is used to fill out the UUID fields in Figure 8. The UUID version and variant then replace the respective bits as defined by Section 4.2 and Section 4.1,¶
Alternatively, an implementation MAY choose to randomly generate the exact required number of bits for for random_a, random_b, and random_c then concatenate the version and variant in the required position.¶
For guidelines on random data generation see Section 6.8.¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | random_a | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | random_a | ver | random_b | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |var| random_c | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | random_c | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The first 48 bits of the layout that can be filled with random data as specified in Section 6.8¶
The 4 bit version field as defined by Section 4.2 set to 0100¶
12 more bits of the layout that can be filled random data as per Section 6.8¶
The 2 bit variant field as defined by Section 4.1 set to 10¶
The final 62 bits of the layout immediately following the var field to be filled with random data as per Section 6.8¶
UUID Version 5 is meant for generating UUIDs from "names" that are drawn from, and unique within, some "name space" as per Section 6.5.¶
UUIDv5 values are created by computing an SHA1 [SHA1] hash over a given name space value concatenated with the desired name value after both have been converted to a canonical sequence of octets in network byte order. This SHA1 value is then used to populate all 128 bits of the UUID layout. Excess bits beyond 128 are discarded. The UUID version and variant then replace the respective bits as defined by Section 4.2 and Section 4.1¶
Some common name space values have been defined via Appendix A.¶
There may be scenarios, usually depending on organizational security policies, where SHA1 libraries may not be available or deemed unsafe for use. As such it may be desirable to generate name-based UUIDs derived from SHA256 or newer SHA methods. These name-based UUIDs MUST NOT utilize UUIDv5 and MUST be within the UUIDv8 space defined by Section 5.8. For implementation guidance around utilizing UUIDv8 for name-based UUIDs refer to the sub-section of Section 6.5.¶
For more information on SHA1 security considerations see [RFC6194].¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | sha1_high | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | sha1_high | ver | sha1_mid | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |var| sha1_low | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | sha1_low | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The first 48 bits of the layout are filled with the most significant, left-most 48 bits from the computed SHA1 value.¶
The 4 bit version field as defined by Section 4.2¶
12 more bits of the layout consisting of the least significant, right-most 12 bits of 16 bits immediately following sha1_high from the computed SHA1 value.¶
The 2 bit variant field as defined by Section 4.1.¶
The final 62 bits of the layout immediately following the var field to be filled by skipping the 2 most significant, left-most bits of the remaining SHA1 hash and then using the next 62 most significant, left-most bits. Any leftover SHA1 bits are discarded and unused.¶
UUID version 6 is a field-compatible version of UUIDv1, reordered for improved DB locality. It is expected that UUIDv6 will primarily be used in contexts where there are existing v1 UUIDs. Systems that do not involve legacy UUIDv1 SHOULD use UUIDv7 instead.¶
Instead of splitting the timestamp into the low, mid and high sections from UUIDv1, UUIDv6 changes this sequence so timestamp bytes are stored from most to least significant. That is, given a 60 bit timestamp value as specified for UUIDv1 in Section 5.1, for UUIDv6, the first 48 most significant bits are stored first, followed by the 4 bit version (same position), followed by the remaining 12 bits of the original 60 bit timestamp.¶
The clock sequence bits remain unchanged from their usage and position in Section 5.1.¶
The clock sequence and node bits SHOULD be reset to a pseudo-random value for each new UUIDv6 generated; however, implementations MAY choose to retain the old MAC address behavior from Section 5.1. For more information on MAC address usage within UUIDs see the Section 9.¶
The format for the 16-byte, 128 bit UUIDv6 is shown in Figure 10¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | time_high | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | time_mid | ver | time_low | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |var| clock_seq | node | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | node | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The most significant 32 bits of the 60 bit starting timestamp. Occupies bits 0 through 31 (octets 0-3)¶
The middle 16 bits of the 60 bit starting timestamp. Occupies bits 32 through 47 (octets 4-5)¶
The 4 bit version field as defined by Section 4.2 set to 0110. Occupies bits 48 through 51 of Octet 6.¶
12 bits that will contain the least significant 12 bits from the 60 bit starting timestamp. Occupies bits 52 through 63 (octets 6-7)¶
The 2 bit variant field as defined by Section 4.1 set to 10. Occupies bits 64 and 65 of octet 8.¶
The 14 bits containing the clock sequence. Occupies bits 66 through 79 (octets 8-9).¶
48 bit spatially unique identifier Occupies bits 80 through 127 (octets 10-15)¶
With UUIDv6 the steps for splitting the timestamp into time_high and time_mid are OPTIONAL since the 48 bits of time_high and time_mid will remain in the same order. An extra step of splitting the first 48 bits of the timestamp into the most significant 32 bits and least significant 16 bits proves useful when reusing an existing UUIDv1 implementation.¶
UUID version 7 features a time-ordered value field derived from the widely implemented and well known Unix Epoch timestamp source, the number of milliseconds seconds since midnight 1 Jan 1970 UTC, leap seconds excluded. UUID verion 7 also has improved entropy characteristics over versions 1 or 6.¶
Implementations SHOULD utilize UUID version 7 instead of UUID version 1 and 6 if possible.¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | unix_ts_ms | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | unix_ts_ms | ver | rand_a | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |var| rand_b | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | rand_b | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
48 bit big-endian unsigned number of Unix epoch timestamp in milliseconds as per Section 6.1.¶
4 bit UUIDv7 version set as per Section 4.2¶
12 bits pseudo-random data to provide uniqueness as per Section 6.8 and/or an optional counter to guarantee additional monotonicity as per Section 6.2.¶
The 2 bit variant defined by Section 4.1.¶
The final 62 bits of pseudo-random data to provide uniqueness as per Section 6.8 and/or an optional counter to guarantee additional monotonicity as per Section 6.2.¶
UUID version 8 provides an RFC-compatible format for experimental or vendor-specific use cases. The only requirement is that the variant and version bits MUST be set as defined in Section 4.1 and Section 4.2. UUIDv8's uniqueness will be implementation-specific and MUST NOT be assumed.¶
The only explicitly defined bits are the Version and Variant leaving 122 bits for implementation specific UUIDs. To be clear: UUIDv8 is not a replacement for UUIDv4 where all 122 extra bits are filled with random data.¶
Some example situations in which UUIDv8 usage could occur:¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | custom_a | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | custom_a | ver | custom_b | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |var| custom_c | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | custom_c | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The first 48 bits of the layout that can be filled as an implementation sees fit.¶
The 4 bit version field as defined by Section 4.2¶
12 more bits of the layout that can be filled as an implementation sees fit.¶
The 2 bit variant field as defined by Section 4.1.¶
The final 62 bits of the layout immediately following the var field to be filled as an implementation sees fit.¶
The nil UUID is special form of UUID that is specified to have all 128 bits set to zero.¶
00000000-0000-0000-0000-000000000000
The Max UUID is special form of UUID that is specified to have all 128 bits set to 1. This UUID can be thought of as the inverse of Nil UUID defined in Section 5.9.¶
FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF
The minimum requirements for generating UUIDs are described in this document for each version. Everything else is an implementation detail and up to the implementer to decide what is appropriate for a given implementation. Various relevant factors are covered below to help guide an implementer through the different trade-offs among differing UUID implementations.¶
UUID timestamp source, precision and length was the topic of great debate while creating UUIDv7 for this specification. Choosing the right timestamp for your application is a very important topic. This section will detail some of the most common points on this topic.¶
Implementations SHOULD use the current timestamp from a reliable source to provide values that are time-ordered and continually increasing. Care SHOULD be taken to ensure that timestamp changes from the environment or operating system are handled in a way that is consistent with implementation requirements. For example, if it is possible for the system clock to move backward due to either manual adjustment or corrections from a time synchronization protocol, implementations need to determine how to handle such cases. (See Altering, Fuzzing, or Smearing bullet below.)¶
UUID version 1 and 6 both utilize a Gregorian epoch timestamp while UUIDv7 utilizes a Unix Epoch timestamp. If other timestamp sources or a custom timestamp epoch are required UUIDv8 SHOULD be used.¶
Many levels of precision exist for timestamps: milliseconds, microseconds, nanoseconds, and beyond. Additionally fractional representations of sub-second precision may be desired to mix various levels of precision in a time-ordered manner. Furthermore, system clocks themselves have an underlying granularity and it is frequently less than the precision offered by the operating system. With UUID version 1 and 6, 100-nanoseconds of precision are present while UUIDv7 features fixed millisecond level of precision within the Unix epoch that does not exceed the granularity capable in most modern systems. For other levels of precision UUIDv8 SHOULD be utilized. Similar to Section 6.2, with UUIDv1 or UUIDv6, a high resolution timestamp can be simulated by keeping a count of the number of UUIDs that have been generated with the same value of the system time, and using it to construct the low order bits of the timestamp. The count will range between zero and the number of 100-nanosecond intervals per system time interval.¶
The length of a given timestamp directly impacts how long a given UUID will be valid. That is, how many timestamp ticks can be contained in a UUID before the maximum value for the timestamp field is reached. Care should be given to ensure that the proper length is selected for a given timestamp. UUID version 1 and 6 utilize a 60 bit timestamp valid until 5623 AD and UUIDv7 features a 48 bit timestamp valid until the year 10889 AD.¶
Implementations MAY alter the actual timestamp. Some examples include security considerations around providing a real clock value within a UUID, to correct inaccurate clocks, or to handle leap seconds. This specification makes no requirement or guarantee about how close the clock value needs to be to the actual time. If UUIDs do not need to be frequently generated, the UUIDv1 or UUIDv6 timestamp can simply be the system time multiplied by the number of 100-nanosecond intervals per system time interval.¶
When timestamp padding is required, implementations MUST pad the most significant bits (left-most) bits with zeros. An example is padding the most significant, left-most bits of a 32 bit Unix timestamp with zeros to fill out the 48 bit timestamp in UUIDv7.¶
When timestamps need to be truncated, the lower, least significant bits MUST be used. An example would be truncating a 64 bit Unix timestamp to the least significant, right-most 48 bits for UUIDv7.¶
If a system overruns the generator by requesting too many UUIDs within a single system time interval, the UUID service MUST either return an error, or stall the UUID generator until the system clock catches up. Note that if the processors overrun the UUID generation frequently, additional node identifiers can be allocated to the system, which will permit higher speed allocation by making multiple UUIDs potentially available for each time stamp value. Similar techniques are discussed in Section 6.4.¶
Monotonicity is the backbone of time-based sortable UUIDs. Normally, time-based UUIDs from this document will be monotonic due to an embedded timestamp; however, implementations can guarantee additional monotonicity via the concepts covered in this section.¶
Care SHOULD be taken to ensure UUIDs generated in batches are also monotonic. That is, if one thousand UUIDs are generated for the same timestamp, there SHOULD be sufficient logic for organizing the creation order of those one thousand UUIDs. Batch UUID creation implementations MAY utilize a monotonic counter that SHOULD increment for each UUID created during a given timestamp.¶
For single-node UUID implementations that do not need to create batches of UUIDs, the embedded timestamp within UUID version 6 and 7 can provide sufficient monotonicity guarantees by simply ensuring that timestamp increments before creating a new UUID. Distributed nodes are discussed in Section 6.4.¶
Implementations SHOULD choose one method for single-node UUID implementations that require batch UUID creation.¶
Some implementations allocate a specific number of bits in the UUID layout to the sole purpose of tallying the total number of UUIDs created during a given UUID timestamp tick. A fixed bit-length counter, if present, SHOULD be positioned immediately after the embedded timestamp. This promotes sortability and allows random data generation for each counter increment. With this method, the rand_a section of UUIDv7 SHOULD be used as fixed-length dedicated counter bits that are incremented by one for every UUID generation. The trailing random bits generated for each new UUID in rand_b can help produce unguessable UUIDs. In the event more counter bits are required, the most significant (left-most) bits of rand_b MAY be used as additional counter bits.¶
With this method, the random data is extended to also function as a counter. This monotonic value can be thought of as a "randomly seeded counter" which MUST be incremented in the least significant position for each UUID created on a given timestamp tick. UUIDv7's rand_b section SHOULD be utilized with this method to handle batch UUID generation during a single timestamp tick. The increment value for every UUID generation SHOULD be a random integer of any desired length larger than zero. It ensures the UUIDs retain the required level of unguessability provided by the underlying entropy. The increment value MAY be one when the number of UUIDs generated in a particular period of time is important and guessability is not an issue. However, it SHOULD NOT be used by implementations that favor unguessiblity, as the resulting values are easily guessable.¶
The following sub-topics cover topics related solely with creating reliable fixed-length dedicated counters:¶
Implementations utilizing the fixed-length counter method SHOULD randomly initialize the counter with each new timestamp tick. However, when the timestamp has not incremented, the counter SHOULD be frozen and incremented via the desired increment logic. When utilizing a randomly seeded counter alongside Method 1, the random value MAY be regenerated with each counter increment without impacting sortability. The downside is that Method 1 is prone to overflows if a counter of adequate length is not selected or the random data generated leaves little room for the required number of increments. Implementations utilizing fixed-length counter method MAY also choose to randomly initialize a portion counter rather than the entire counter. For example, a 24 bit counter could have the 23 bits in least-significant, right-most, position randomly initialized. The remaining most significant, left-most counter bits are initialized as zero for the sole purpose of guarding against counter rollovers.¶
Care MUST be taken to select a counter bit-length that can properly handle the level of timestamp precision in use. For example, millisecond precision generally requires a larger counter than a timestamp with nanosecond precision. General guidance is that the counter SHOULD be at least 12 bits but no longer than 42 bits. Care SHOULD also be given to ensure that the counter length selected leaves room for sufficient entropy in the random portion of the UUID after the counter. This entropy helps improve the unguessability characteristics of UUIDs created within the batch.¶
The following sub-topics cover rollover handling with either type of counter method:¶
The technique from Fixed-Length Dedicated Counter Seeding that describes allocating a segment of the fixed-length counter as a rollover guard is also helpful to mitigate counter rollover issues. This same technique can be used with monotonic random counter methods by ensuring the total length of a possible increment in the least significant, right most position is less than the total length of the random being incremented. As such the most significant, left-most, bits can be incremented as rollover guarding.¶
Counter rollovers SHOULD be handled by the application to avoid sorting issues. The general guidance is that applications that care about absolute monotonicity and sortability SHOULD freeze the counter and wait for the timestamp to advance which ensures monotonicity is not broken. Alternatively, implementations MAY increment the timestamp ahead of the actual time and reinitialize the counter.¶
Implementations MAY use the following logic to ensure UUIDs featuring embedded counters are monotonic in nature:¶
Implementations SHOULD check if the the currently generated UUID is greater than the previously generated UUID. If this is not the case then any number of things could have occurred, such as clock rollbacks, leap second handling, and counter rollovers. Applications SHOULD embed sufficient logic to catch these scenarios and correct the problem to ensure that the next UUID generated is greater than the previous. To handle this scenario, the general guidance is that application MAY reuse the previous timestamp and increment the previous counter method.¶
The UUID generator state only needs to be read from stable storage once at boot time, if it is read into a system-wide shared volatile store (and updated whenever the stable store is updated).¶
This stable storage MAY be used to record various portions of the UUID generation which prove useful for batch UUID generation purposes and monotonic error checking with UUIDv6 and UUIDv7. These stored values include but are not limited to last known timestamp, clock sequence, counters and random data.¶
If an implementation does not have any stable store available, then it SHOULD proceed with UUID generation as if this was the first UUID created within a batch. This is the least desirable implementation because it will increase the frequency of creation of values such as clock sequence, counters or random data which increases the probability of duplicates.¶
An implementation MAY also return an application error in the event that collision resistance is of the utmost concern. The semantics of this error are up to the application and implementation. See Section 6.6 for more information on weighting collision tolerance in applications.¶
For UUIDv1 and UUIDv6, if the node ID can never change (e.g., the network interface card from which the node ID is derived is inseparable from the system), or if any change also re-initializes the clock sequence to a random value, then instead of keeping it in stable store, the current node ID may be returned.¶
For UUIDv1 and UUIDv6, the state does not always need to be written to stable store every time a UUID is generated. The timestamp in the stable store can be periodically set to a value larger than any yet used in a UUID. As long as the generated UUIDs have timestamps less than that value, and the clock sequence and node ID remain unchanged, only the shared volatile copy of the state needs to be updated. Furthermore, if the timestamp value in stable store is in the future by less than the typical time it takes the system to reboot, a crash will not cause a re-initialization of the clock sequence.¶
If it is too expensive to access shared state each time a UUID is generated, then the system-wide generator can be implemented to allocate a block of time stamps each time it is called; a per- process generator can allocate from that block until it is exhausted.¶
The concept of name and name space should be broadly construed, and not limited to textual names. For example, some name spaces are the domain name system, URLs, Object Identifiers (OIDs), X.500 Distinguished Names (DNs), and reserved words in a programming language. The mechanisms or conventions used for allocating names and ensuring their uniqueness within their name spaces are beyond the scope of this specification.¶
The requirements for name-based UUIDs are as follows:¶
While Appendix A details a few interesting namespaces; implementations SHOULD provide the ability input a custom namespace. For example, any other UUID MAY be generated and uses as the desired namespace input for a given application context to ensure all names created are unique within the newly created namespace.¶
As per Section 5.5 name-based UUIDs that desire to use modern hashing algorithms MUST be created within the UUIDv8 space. These MAY leverage newer hashing protocols such as SHA256, SHA512, [SHA3] or even protocols that have not been defined yet. To ensure UUIDv8 Name-Based UUID values of different hashing protocols can exist in the same bit space; this document defines various "hashspaces" in Appendix B. Creation of name-based version 8 UUIDs follow the same logic defined in Section 5.5 but the hashspace should be used to as the starting point with the desired namespace and name concatenated to the end of the hashspace. Then an implementation may apply the desired hashing algorithm to the entire value after all have been converted to a canonical sequence of octets in network byte order. Ensure the version and variant and variant bits are modified as per Section 5.8 bit layout and finally trim any excess bits beyond 128. An important note for secure hashing algorithms that produce variable rate outputs, such as those found in SHAKE, the output hash MUST be 128 bits or larger. See Appendix C.8 for a SHA256 UUIDv8 example test vector.¶
Name-based UUIDs utilizing UUIDv8 do not allocate any available bits to identifying the hashing algorithm. As such where common knowledge about the hashing algorithm for a given UUIDv8 name-space UUID is required, sharing the Hash Space ID proves useful for identifying a the algorithm. That is, to detail SHA2-256 was used to create a given UUIDv8 name-based UUID an implementation may also share the "3fb32780-953c-4464-9cfd-e85dbbe9843d" hash space which uniquely identifies the SHA2-256 hashing algorithm for the purpose of UUIDv8. Mind you that this need not be the only method of sharing the hashing algorithm; this is one example of how two systems could share knowledge. The protocol of choice, communication channels and actual method of sharing this data between systems it outside the scope of this specification.¶
Implementations SHOULD weigh the consequences of UUID collisions within their application and when deciding between UUID versions that use entropy (randomness) versus the other components such as those in Section 6.1 and Section 6.2. This is especially true for distributed node collision resistance as defined by Section 6.4.¶
There are two example scenarios below which help illustrate the varying seriousness of a collision within an application.¶
A UUID collision generated a duplicate log entry which results in incorrect statistics derived from the data. Implementations that are not negatively affected by collisions may continue with the entropy and uniqueness provided by the traditional UUID format.¶
A duplicate key causes an airplane to receive the wrong course which puts people's lives at risk. In this scenario there is no margin for error. Collisions MUST be avoided and failure is unacceptable. Applications dealing with this type of scenario MUST employ as much collision resistance as possible within the given application context.¶
UUIDs created by this specification MAY be used to provide local uniqueness guarantees. For example, ensuring UUIDs created within a local application context are unique within a database MAY be sufficient for some implementations where global uniqueness outside of the application context, in other applications, or around the world is not required.¶
Although true global uniqueness is impossible to guarantee without a shared knowledge scheme, a shared knowledge scheme is not required by UUID to provide uniqueness guarantees. Implementations MAY implement a shared knowledge scheme introduced in Section 6.4 as they see fit to extend the uniqueness guaranteed this specification.¶
Implementations SHOULD utilize a cryptographically secure pseudo-random number generator (CSPRNG) to provide values that are both difficult to predict ("unguessable") and have a low likelihood of collision ("unique"). Care SHOULD be taken to ensure the CSPRNG state is properly reseeded upon state changes, such as process forks, to ensure proper CSPRNG operation. CSPRNG ensures the best of Section 6.6 and Section 9 are present in modern UUIDs.¶
Further advice on generating cryptographic-quality random numbers can be found in [RFC4086] and in [RANDOM].¶
This section describes how to generate a UUIDv1 or UUIDv6 value if an IEEE 802 address is not available, or its use is not desired.¶
Implementations SHOULD obtain a 47-bit cryptographic-quality random number as per Section 6.8 and use it as the low 47 bits of the node ID.¶
Implementations MUST set the least significant bit of the first octet of the node ID set to one to create a 48-bit node id. This bit is the unicast/multicast bit, which will never be set in IEEE 802 addresses obtained from network cards. Hence, there can never be a conflict between UUIDs generated by machines with and without network cards.¶
For compatibility with earlier specifications, note that this document uses the unicast/multicast bit, instead of the arguably more correct local/global bit.¶
In addition, items such as the computer's name and the name of the operating system, while not strictly speaking random, will help differentiate the results from those obtained by other systems.¶
The exact algorithm to generate a node ID using these data is system specific, because both the data available and the functions to obtain them are often very system specific. A generic approach, however, is to accumulate as many sources as possible into a buffer, use a message digest such as MD5 [RFC1321] or SHA-1 [SHA1], take an arbitrary 6 bytes from the hash value, and set the multicast bit as described above.¶
UUIDv6 and UUIDv7 are designed so that implementations that require sorting (e.g. database indexes) SHOULD sort as opaque raw bytes, without need for parsing or introspection.¶
Time ordered monotonic UUIDs benefit from greater database index locality because the new values are near each other in the index. As a result objects are more easily clustered together for better performance. The real-world differences in this approach of index locality vs random data inserts can be quite large.¶
UUIDs formats created by this specification SHOULD be lexicographically sortable while in the textual representation.¶
UUIDs created by this specification are crafted with big-endian byte order (network byte order) in mind. If little-endian style is required a custom UUID format SHOULD be created using UUIDv8.¶
UUIDs SHOULD be treated as opaque values and implementations SHOULD NOT examine the bits in a UUID. However, inspectors MAY refer to Section 4.1 and Section 4.2 when required to determine UUID version and variant.¶
For many applications, such as databases, storing UUIDs as text is unnecessarily verbose, requiring 288 bits to represent 128 bit UUID values. Thus, where feasible, UUIDs SHOULD be stored within database applications as the underlying 128 bit binary value.¶
For other systems, UUIDs MAY be stored in binary form or as text, as appropriate. The trade-offs to both approaches are:¶
DBMS vendors are encouraged to provide functionality to generate and store UUID formats defined by this specification for use as identifiers or left parts of identifiers such as, but not limited to, primary keys, surrogate keys for temporal databases, foreign keys included in polymorphic relationships, and keys for key-value pairs in JSON columns and key-value databases. Applications using a monolithic database may find using database-generated UUIDs (as opposed to client-generate UUIDs) provides the best UUID monotonicity. In addition to UUIDs, additional identifiers MAY be used to ensure integrity and feedback.¶
Per [RFC8141] here is the Namespace Registration Template filled out for this namespace and hereby a request to reference this document (when the final version is published) at [URNNamespaces]. Note that namespace is already listed and this is a request to update that entry to reference this document.¶
Namespace Identifier: UUID (formal)¶
Version: 1¶
Date: 2003-10-01¶
Registrant: JTC 1/SC6 (ASN.1 Rapporteur Group)¶
Purpose: A UUID is an identifier that is unique across both space and time, with respect to the space of all UUIDs. Since a UUID is a fixed size and contains a time field, it is possible for values to rollover (around A.D. 3400, depending on the specific algorithm used). A UUID can be used for multiple purposes, from tagging objects with an extremely short lifetime, to reliably identifying very persistent objects across a network.¶
Syntax: The internal representation of a UUID is a specific sequence of bits in memory, as described in Section 4 and Section 5. To accurately represent a UUID as a URN, it is necessary to convert the bit sequence to a string representation.¶
The formal definition of the UUID string representation is provided by the following ABNF and definitions within Section 4 and more specifically Figure 4.¶
Assignment: Individual UUID values are generated based on the uniqueness properties otherwise covered in this document with version-specific considerations for each. Mechanisms include pseudorandom number generation, cryptographic hashing and the option to use IEEE 802 MAC addresses.¶
Security and Privacy: The recommended generation algorithms for UUIDs per this document involve pseudorandom number generation and as such do not present additional privacy or data exposure risks beyond any such random value generated. The use of IEEE 802 MAC addresses which may present security problems has explicitly been made optional and not recommended.¶
Interoperability: UUIDs, and UUID values in the form of URNs in particular, are opaque values the syntax as covered above has no proposed changes and thus no known interoperability issues.¶
Resolution: Since UUIDs are not globally resolvable, this is not applicable.¶
Documentation: This document and RFC4122. Relevant ancillary documentation: [NCA][C309]¶
Additional Information: The intention here is simply to include this document in any applicable references at [URNNamespaces]. There is no intention to change the existing UUID URN registration. The scope of this document pertains solely to the internal structure and versions of UUIDs, the textual format and URN registration are specifically out of scope and not changing as part of this update.¶
Further, the authors and working group have decided that IANA is not required to track UUIDs used for identifying items such as namespaces or hashspaces from Appendix A and Appendix B.¶
The use of UUIDs is extremely pervasive in computing. They comprise the core identifier infrastructure for many operating systems such as Microsoft Windows and applications such as the Mozilla Web browser and in many cases, become exposed in many non-standard ways.¶
This specification attempts to standardize that practice as openly as possible and in a way that attempts to benefit the entire Internet.¶
Implementations MUST NOT assume that UUIDs are hard to guess. Foe example, they MUST not be used as security capabilities (identifiers whose mere possession grants access). Discovery of predictablity in a random number source will result in a vulnerability.¶
Implementations MUST NOT assume that it is easy to determine if a UUID has been slightly transposed in order to redirect a reference to another object. Humans do not have the ability to easily check the integrity of a UUID by simply glancing at it.¶
MAC addresses pose inherent security risks and SHOULD not be used within a UUID. Instead CSPRNG data SHOULD be selected from a source with sufficient entropy to ensure guaranteed uniqueness among UUID generation. See Section 6.8 and Section 6.9 for more information.¶
Timestamps embedded in the UUID do pose a very small attack surface. The timestamp in conjunction with an embedded counter does signal the order of creation for a given UUID and its corresponding data but does not define anything about the data itself or the application as a whole. If UUIDs are required for use with any security operation within an application context in any shape or form then UUIDv4, Section 5.4 SHOULD be utilized.¶
See [RFC6151] for MD5 Security Considerations and [RFC6194] for SHA1 security considerations.¶
The authors gratefully acknowledge the contributions of Rich Salz, Ben Campbell, Ben Ramsey, Fabio Lima, Gonzalo Salgueiro, Martin Thomson, Murray S. Kucherawy, Rick van Rein, Rob Wilton, Sean Leonard, Theodore Y. Ts'o., Robert Kieffer, Sergey Prokhorenko, LiosK¶
As well as all of those in the IETF community and on GitHub to who contributed to the discussions which resulted in this document.¶
This document draws heavily on the OSF DCE specification for UUIDs. Ted Ts'o provided helpful comments, especially on the byte ordering section which we mostly plagiarized from a proposed wording he supplied (all errors in that section are our responsibility, however).¶
We are also grateful to the careful reading and bit-twiddling of Ralf S. Engelschall, John Larmouth, and Paul Thorpe. Professor Larmouth was also invaluable in achieving coordination with ISO/IEC.¶
This appendix lists the name space IDs for some potentially interesting name spaces, as initialized C structures and in the string representation defined above.¶
/* Name string is a fully-qualified domain name */
uuid_t NameSpace_DNS = { /* 6ba7b810-9dad-11d1-80b4-00c04fd430c8 */
0x6ba7b810,
0x9dad,
0x11d1,
0x80, 0xb4, 0x00, 0xc0, 0x4f, 0xd4, 0x30, 0xc8
};
/* Name string is a URL */
uuid_t NameSpace_URL = { /* 6ba7b811-9dad-11d1-80b4-00c04fd430c8 */
0x6ba7b811,
0x9dad,
0x11d1,
0x80, 0xb4, 0x00, 0xc0, 0x4f, 0xd4, 0x30, 0xc8
};
/* Name string is an ISO OID */
uuid_t NameSpace_OID = { /* 6ba7b812-9dad-11d1-80b4-00c04fd430c8 */
0x6ba7b812,
0x9dad,
0x11d1,
0x80, 0xb4, 0x00, 0xc0, 0x4f, 0xd4, 0x30, 0xc8
};
/* Name string is an X.500 DN (in DER or a text output format) */
uuid_t NameSpace_X500 = { /* 6ba7b814-9dad-11d1-80b4-00c04fd430c8 */
0x6ba7b814,
0x9dad,
0x11d1,
0x80, 0xb4, 0x00, 0xc0, 0x4f, 0xd4, 0x30, 0xc8
};
¶
This appendix lists the hash space IDs for use with UUIDv8 name-based UUIDs.¶
SHA2_224 = "59031ca3-fbdb-47fb-9f6c-0f30e2e83145" SHA2_256 = "3fb32780-953c-4464-9cfd-e85dbbe9843d" SHA2_384 = "e6800581-f333-484b-8778-601ff2b58da8" SHA2_512 = "0fde22f2-e7ba-4fd1-9753-9c2ea88fa3f9" SHA2_512_224 = "003c2038-c4fe-4b95-a672-0c26c1b79542" SHA2_512_256 = "9475ad00-3769-4c07-9642-5e7383732306" SHA3_224 = "9768761f-ac5a-419e-a180-7ca239e8025a" SHA3_256 = "2034d66b-4047-4553-8f80-70e593176877" SHA3_384 = "872fb339-2636-4bdd-bda6-b6dc2a82b1b3" SHA3_512 = "a4920a5d-a8a6-426c-8d14-a6cafbe64c7b" SHAKE_128 = "7ea218f6-629a-425f-9f88-7439d63296bb" SHAKE_256 = "2e7fc6a4-2919-4edc-b0ba-7d7062ce4f0a"¶
Both UUIDv1 and UUIDv6 test vectors utilize the same 60 bit timestamp: 0x1EC9414C232AB00 (138648505420000000) Tuesday, February 22, 2022 2:22:22.000000 PM GMT-05:00¶
Both UUIDv1 and UUIDv6 utilize the same values in clock_seq, and node. All of which have been generated with random data.¶
# Unix Nanosecond precision to Gregorian 100-nanosecond intervals gregorian_100_ns = (Unix_64_bit_nanoseconds / 100) + gregorian_Unix_offset # Gregorian to Unix Offset: # The number of 100-ns intervals between the # UUID epoch 1582-10-15 00:00:00 and the Unix epoch 1970-01-01 00:00:00. # gregorian_Unix_offset = 0x01b21dd213814000 or 122192928000000000 # Unix 64 bit Nanosecond Timestamp: # Unix NS: Tuesday, February 22, 2022 2:22:22 PM GMT-05:00 # Unix_64_bit_nanoseconds = 0x16D6320C3D4DCC00 or 1645557742000000000 # Work: # gregorian_100_ns = (1645557742000000000 / 100) + 122192928000000000 # (138648505420000000 - 122192928000000000) * 100 = Unix_64_bit_nanoseconds # Final: # gregorian_100_ns = 0x1EC9414C232AB00 or 138648505420000000 # Original: 000111101100100101000001010011000010001100101010101100000000 # UUIDv1: 11000010001100101010101100000000|1001010000010100|0001|000111101100 # UUIDv6: 00011110110010010100000101001100|0010001100101010|0110|101100000000
---------------------------------------------- field bits value ---------------------------------------------- time_low 32 0xC232AB00 time_mid 16 0x9414 ver 4 0x1 time_high 12 0x1EC var 2 b10 clock_seq 14 b11, 0x3C8 node 48 0x9E6BDECED846 ---------------------------------------------- total 128 ---------------------------------------------- final_hex: C232AB00-9414-11EC-B3C8-9E6BDECED846
The MD5 computation from is detailed in Figure 17 using the DNS NameSpace and the Name "www.example.com". while the field mapping and all values are illustrated in Figure 18. Finally to further illustrate the bit swaping for version and variant see Figure 19.¶
Name Space (DNS): 6ba7b810-9dad-11d1-80b4-00c04fd430c8 Name: www.example.com ----------------------------------------------- MD5: 5df418813aed051548a72f4a814cf09e
------------------------------- field bits value ------------------------------- md5_high 48 0x5df418813aed ver 4 0x3 md5_mid 12 0x515 var 2 b10 md5_low 62 b00, 0x8a72f4a814cf09e ------------------------------- total 128 ------------------------------- final: 5df41881-3aed-3515-88a7-2f4a814cf09e
MD5 hex and dash: 5df41881-3aed-0515-48a7-2f4a814cf09e Ver and Var Overwrite: xxxxxxxx-xxxx-Mxxx-Nxxx-xxxxxxxxxxxx Final: 5df41881-3aed-3515-88a7-2f4a814cf09e
This UUIDv4 example was created by generating 16 bytes of random data resulting in the hex value of 919108F752D133205BACF847DB4148A8. This is then used to fill out the feilds as shown in Figure 20.¶
Finally to further illustrate the bit swapping for version and variant see Figure 21.¶
------------------------------- field bits value ------------------------------- random_a 48 0x919108f752d1 ver 4 0x4 random_b 12 0x320 var 2 b10 random_c 62 b01, 0xbacf847db4148a8 ------------------------------- total 128 ------------------------------- final: 919108f7-52d1-4320-9bac-f847db4148a8
Random hex: 919108f752d133205bacf847db4148a8 Random hex and dash: 919108f7-52d1-3320-5bac-f847db4148a8 Ver and Var Overwrite: xxxxxxxx-xxxx-Mxxx-Nxxx-xxxxxxxxxxxx Final: 919108f7-52d1-4320-9bac-f847db4148a8
The SHA1 computation from is detailed in Figure 22 using the DNS NameSpace and the Name "www.example.com". while the field mapping and all values are illustrated in Figure 23. Finally to further illustrate the bit swapping for version and variant and the unused/discarded part of the SHA1 value see Figure 24.¶
Name Space (DNS): 6ba7b810-9dad-11d1-80b4-00c04fd430c8 Name: www.example.com ----------------------------------------------- SHA1: 2ed6657de927468b55e12665a8aea6a22dee3e35
------------------------------- field bits value ------------------------------- sha1_high 48 0x2ed6657de927 ver 4 0x5 sha1_mid 12 0x68b var 2 b10 sha1_low 62 b01, 0x5e12665a8aea6a2 ------------------------------- total 128 ------------------------------- final: 2ed6657d-e927-568b-95e1-2665a8aea6a2
SHA1 hex and dash: 2ed6657d-e927-468b-55e1-2665a8aea6a2-2dee3e35 Ver and Var Overwrite: xxxxxxxx-xxxx-Mxxx-Nxxx-xxxxxxxxxxxx Final: 2ed6657d-e927-568b-95e1-2665a8aea6a2 Discarded: -2dee3e35
----------------------------------------------- field bits value ----------------------------------------------- time_high 32 0x1EC9414C time_mid 16 0x232A ver 4 0x6 time_high 12 0xB00 var 2 b10 clock_seq 14 b11, 0x3C8 node 48 0x9E6BDECED846 ----------------------------------------------- total 128 ----------------------------------------------- final_hex: 1EC9414C-232A-6B00-B3C8-9E6BDECED846
This example UUIDv7 test vector utilizes a well-known 32 bit Unix epoch with additional millisecond precision to fill the first 48 bits¶
rand_a and rand_b are filled with random data.¶
The timestamp is Tuesday, February 22, 2022 2:22:22.00 PM GMT-05:00 represented as 0x17F22E279B0 or 1645557742000¶
------------------------------- field bits value ------------------------------- unix_ts_ms 48 0x17F22E279B0 ver 4 0x7 rand_a 12 0xCC3 var 2 b10 rand_b 62 b01, 0x8C4DC0C0C07398F ------------------------------- total 128 ------------------------------- final: 017F22E2-79B0-7CC3-98C4-DC0C0C07398F
This example UUIDv8 test vector utilizes a well-known 64 bit Unix epoch with nanosecond precision, truncated to the least-significant, right-most, bits to fill the first 48 bits through version.¶
The next two segments of custom_b and custom_c are are filled with random data.¶
Timestamp is Tuesday, February 22, 2022 2:22:22.000000 PM GMT-05:00 represented as 0x16D6320C3D4DCC00 or 1645557742000000000¶
It should be noted that this example is just to illustrate one scenario for UUIDv8. Test vectors will likely be implementation specific and vary greatly from this simple example.¶
------------------------------- field bits value ------------------------------- custom_a 48 0x320C3D4DCC00 ver 4 0x8 custom_b 12 0x75B var 2 b10 custom_c 62 b00, 0xEC932D5F69181C0 ------------------------------- total 128 ------------------------------- final: 320C3D4D-CC00-875B-8EC9-32D5F69181C0
A SHA256 version of Appendix C.4 is detailed in Figure 28 to detail the usage of hash spaces alongside namespace and names. The field mapping and all values are illustrated in Figure 29. Finally to further illustrate the bit swapping for version and variant and the unused/discarded part of the SHA256 value see Figure 30.¶
Hash Space (SHA2_256): 3fb32780-953c-4464-9cfd-e85dbbe9843d Name Space (DNS): 6ba7b810-9dad-11d1-80b4-00c04fd430c8 Name: www.example.com ----------------------------------------------- SHA256: 401835fda627a70a073fed73f2bc5b2c2a8936385a38a9c133de0ca4af0dfaed
------------------------------- field bits value ------------------------------- custom_a 48 0x401835fda627 ver 4 0x8 custom_b 12 0x627 var 2 b10 custom_c 62 b0, 0x73fed73f2bc5b2c ------------------------------- total 128 ------------------------------- final: 401835fd-a627-870a-873f-ed73f2bc5b2c
SHA256 hex and dash: 401835fd-a627-a70a-073f-ed73f2bc5b2c-2a8936385a38a9c133de0ca4af0dfaed Ver and Var Overwrite: xxxxxxxx-xxxx-Mxxx-Nxxx-xxxxxxxxxxxx Final: 401835fd-a627-870a-873f-ed73f2bc5b2c Discarded: -2a8936385a38a9c133de0ca4af0dfaed