| Internet-Draft | 3rd-Party Token-based AuthNZ for SIP | March 2020 |
| Shekh-Yusef, et al. | Expires 25 September 2020 | [Page] |
This document defines the "Bearer" authentication scheme for the Session Initiation Protocol (SIP), and a mechanism by which user authentication and SIP registration authorization is delegated to a third party, using the OAuth 2.0 framework and OpenID Connect Core 1.0. This document updates RFC 3261 to provide guidance on how a SIP User Agent Client (UAC) responds to a SIP 401/407 response that contains multiple WWW-Authenticate/Proxy-Authenticate header fields.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 25 September 2020.¶
Copyright (c) 2020 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.¶
The Session Initiation Protocol (SIP) [RFC3261] uses the same framework as HTTP [RFC7230] to authenticate users: a simple challenge-response authentication mechanism that allows a SIP server to challenge a SIP client request and allows a SIP client to provide authentication information in response to that challenge.¶
OAuth 2.0 [RFC6749] defines a token-based authorization framework to allow an OAuth client to access resources on behalf of its user.¶
The OpenID Connect 1.0 specification [OPENID] defines a simple identity layer on top of the OAuth 2.0 protocol, which enables clients to verify the identity of the user based on the authentication performed by a dedicated authorization server, as well as to obtain basic profile information about the user.¶
This document defines the "Bearer" authentication scheme for the Session Initiation Protocol (SIP), and a mechanism by which user authentication and SIP registration authorization is delegated to a third party, using the OAuth 2.0 framework and OpenID Connect Core 1.0. This kind of user authentication enables the single-sign-on feature, which allows the user to authenticate once and gain access to both SIP and non-SIP services.¶
This document also updates [RFC3261], by defining the User Agent Client (UAC) procedures when a UAC receives a 401/407 response with multiple WWW-Authenticate/Proxy-Authenticate header fields, providing challenges using different authentication schemes for the same realm.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
The OAuth 2.0 authorization framework [RFC6749] defines two types of clients, confidential and public, that apply to the SIP UACs.¶
The mechanism defined in this document MUST only be used with Confidential User Agents, as the UAC is expected to obtain and maintain tokens to be able to access the SIP network.¶
The tokens used in third-party authorization depend on the type of authorization server (AS).¶
An OAuth authorization server provides the following tokens to a successfully authorized UAC:¶
An OpenID Connect server returns an additional token:¶
Tokens can be represented in two different formats:¶
Access Tokens could be represented in one of the above two formats. Refresh Tokens usualy are represented in a reference format, as this token is consumed only the AS that issued the token. ID Token is defined as a structured token in the form of a JWT.¶
Figure 1 below shows an example of a SIP registration, where the registrar informs the UAC about the authorization server from which the UAC can obtain an access token in a 401 response to the REGISTER request.¶
UAC Registrar AS
---------------------------------------------------------------------
| | |
| [1] REGISTER | |
|------------------------------>| |
| | |
| [2] 401 Unauthorized | |
| WWW-Authenticate: Bearer "authz_server"="<authz_server>" |
|<------------------------------| |
| | |
| [3] The UAC interacts with the AS and obtains tokens, using |
| some out-of-scope mechanism. |
|<=============================================================>|
| | |
| [4] REGISTER | |
| Authorization: Bearer <access_token> |
|------------------------------>| |
| | [5] HTTP POST /introspect |
| | {access_token} |
| |------------------------------>|
| | |
| | [6] 200 OK {metadata} |
| |<------------------------------|
| | |
| [7] 200 OK | |
|<------------------------------| |
| | |
In step [1], the UAC starts the registration process by sending a SIP REGISTER request to the registrar without any credentials.¶
In step [2], the registrar challenges the UA, by sending a SIP 401 (Unauthorized) response to the REGISTER request. In the response, the registrar includes information about the AS to contact in order to obtain a token.¶
In step [3], the UAC interacts with the AS via an out-of-scope mechanism, potentially using the OAuth Native App mechanism defined in [RFC8252]. The AS authenticates the user and provides the UAC with the tokens needed to access the SIP service.¶
In step [4], the UAC retries the registration process by sending a new REGISTER request that includes the access token that the UAC obtained previously.¶
The registrar validates the access token. If the access token is a reference token, the registrar MAY perform an introspection [RFC7662], as in steps [5] and [6], in order to obtain more information about the access token and its scope, per [RFC7662]. Otherwise, after the registrar validates the token to make sure it was signed by a trusted entity, it inspects its claims and acts upon it.¶
In step [7], once the registrar has successfully verified and accepted the access token, it sends a 200 (OK) response to the REGISTER request.¶
Figure 2 shows an example of a SIP registration where the UAC has been preconfigured with information about the AS from which to obtain the access token.¶
UAC Registrar AS
---------------------------------------------------------------------
| | |
| [1] The UAC interacts with the AS and obtains tokens, using |
| some out of scope mechanism. |
|<=============================================================>|
| | |
| [2] REGISTER | |
| Authorization: Bearer <access_token> |
|------------------------------>| |
| | [3] HTTP POST /introspect |
| | {access_token} |
| |------------------------------>|
| | |
| | [4] 200 OK {metadata} |
| |<------------------------------|
| | |
| [5] 200 OK | |
|<------------------------------| |
| | |
In step [1], the UAC interacts with the AS using an out-of-scope mechanism, potentially using the OAuth Native App mechanism defined in [RFC8252]. The AS authenticates the user and provides the UAC with the tokens needed to access the SIP service.¶
In step [2], the UAC initiates the registration process by sending a new REGISTER request that includes the access token that the UAC obtained previously.¶
The registrar validates the access token. If the access token is a reference token, the registrar MAY perform an introspection, as in steps [3] and [4], in order to obtain more information about the access token and its scope, per [RFC7662]. Otherwise, after the registrar validates the token to make sure it was signed by a trusted entity, it inspects its claims and acts upon it.¶
In step [5], once the registrar has successfully verified and accepted the access token, it sends a 200 (OK) response to the REGISTER request.¶
Section 22 of [RFC3261] defines the SIP procedures for the Digest authentication mechanism. The same procedures apply to the Bearer authentication mechanism, with the changes described in this section.¶
When a UAC sends a request without credentials (or with invalid credentials), it could receive either a 401 (Unauthorized) response with a WWW-Authenticate header field or a 407 (Proxy Authentication Required) response with a Proxy-Authenticate header field. If the WWW-Authenticate or Proxy-Authenticate header field indicates "Bearer" scheme authentication and contains an address to an authorization server, the UAC contacts the authorization server in order to obtain tokens, and includes the requested scopes, based on a local configuration (Figure 1).¶
The detailed OAuth2 procedure to authenticate the user and obtain these tokens is out of scope of this document. The address of the authorization server might already be known to the UAC via configuration. In which case, the UAC can contact the authorization server for tokens before it sends a SIP request (Figure 2). Procedures for native applications are defined in [RFC8252]. When using the mechanism defined in [RFC8252] the user of the UAC will be directed to interact with the authorization server using a web browser, allowing the authorization server to prompt the user for multi-factor authentication, to redirect the user to third-party identity providers, and to enable the use of single-sign-on sessions.¶
The tokens returned to the UAC depend on the type of authorization server (AS): an OAuth AS provides an access token and refresh token [RFC6749]. The UAC provides the access token to the SIP servers to authorize UAC's access to the service. The UAC uses the refresh token only with the AS to get a new access token and refresh token before the expiry of the current access token (see [RFC6749], section 1.5 Refresh Token for details). An OpenID Connect server returns an additional ID-Token containing the SIP URI and other user-specific details that will be consumed by the UAC.¶
If the UAC receives a 401/407 response with multiple WWW-Authenticate/Proxy-Authenticate header fields, providing challenges using different authentication schemes for the same realm, the UAC provides credentials for one or more of the schemes that it supports, based on local policy.¶
NOTE: The address of the Authorization Server might be known to the UAC e.g., using means of configuration, in which case the UAC can contact the Authorization Server in order to obtain the access token before it sends SIP request without credentials.¶
[RFC6749] mandates that access tokens are protected with TLS when in transit. However, TLS only guarantees hop-to-hop protection when used to protect SIP signaling. Therefore the access token MUST be protected in a way so that only authorized SIP servers will have access to it. Endpoints that support this specification MUST support encrypted JSON Web Tokens (JWT) [RFC7519] for encoding and protecting access tokens when they are included in SIP requests, unless some other mechanism is used to guarantee that only authorized SIP endpoints have access to the access token.¶
The procedures in this section apply when the UAC has received a challenge that contains a "Bearer" scheme, and the UAC has obtained a token as specified in Section 2.1.1.¶
The UAC sends a REGISTER request with an Authorization header field containing the response to the challenge, including the Bearer scheme carrying a valid access token in the request, as specified in [RFC6750].¶
Note that, if there were multiple challenges with different schemes, then the UAC may be able to successfully retry the request using non-Bearer credentials.¶
Based on local policy, the UAC MAY include an access token that has been used for another binding associated with the same AOR in the request.¶
If the access token included in a REGISTER request is not accepted, and the UAC receives a 401 response or a 407 response, the UAC follows the procedures in Section 2.1.1.¶
The procedures in this section apply when the UAC has received a challenge that contains a "Bearer" scheme, and the UAC has obtained a token as specified in Section 2.1.1.¶
When the UAC sends a request, it MUST include an Authorization header field with a Bearer scheme, carrying a valid access token in the request, as specified in [RFC6750]. Based on local policy, the UAC MAY include an access token that has been used for another dialog, or for another stand-alone request, if the target of the new request is the same.¶
If the access token included in a request is not accepted, and the UAC receives a 401 response or a 407 response, the UAC follows the procedures in Section 2.1.1.¶
When a UAS or Registrar receives a request that fails to contain authorization credentials acceptable to it, it SHOULD challenge the request by sending a 401 (Unauthorized) response. To indicate that it is willing to accept an access token as a credential, the UAS/Registrar MUST include a Proxy-Authentication header field in the response that indicates "Bearer" scheme and includes an address of an authorization server from which the originator can obtain an access token.¶
When a UAS/Registrar receives a SIP request that contains an Authorization header field with an access token, the UAS/Registrar MUST validate the access token, using the procedures associated with the type of access token (Structured or Reference) used, e.g. [RFC7519]. If the token provided is an expired access token, then the UAS MUST reply with 401 Unauthorized, as defined in section 3 of [RFC6750]. If the validation is successful, the UAS/Registrar can continue to process the request using normal SIP procedures. If the validation fails, the UAS/Registrar MUST reject the request.¶
When a proxy receives a request that fails to contain authorization credentials acceptable to it, it SHOULD challenge the request by sending a 407 (Proxy Authentication Required) response. To indicate that it is willing to accept an access token as a credential, the proxy MUST include a Proxy-Authentication header field in the response that indicates "Bearer" scheme and includes an address to an authorization server from which the originator can obtain an access token.¶
When a proxy wishes to authenticate a received request, it MUST search the request for Proxy-Authorization header fields with 'realm' parameters that match its realm. It then MUST successfully validate the credentials from at least one Proxy-Authorization header field for its realm. When the scheme is "Bearer", the proxy MUST validate the access token, using the procedures associated with the type of access token (Structured or Reference) used, e.g., [RFC7519].¶
The type of services to which an access token grants access can be determined using different methods. The methods used and the access provided by the token is based on local policy agreed between the AS and the registrar.¶
If an access token is encoded as a JWT, it might contain a list of claims [RFC7519], some registered and some application-specific. The REGISTRAR can grant access to services based on such claims, some other mechanism, or a combination of claims and some other mechanism. If an access token is a reference token, the REGISTRAR will grant access based on some other mechanism. Examples of such other mechanisms are introspection [RFC7662], user profile lookups, etc.¶
This section uses ABNF [RFC5234] to describe the syntax of the WWW-Authenticate header field when used with the "Bearer" scheme to challenge the UAC for credentials, by extending the 'challenge' parameter defined by [RFC3261].¶
challenge =/ ("Bearer" LWS bearer-cln *(COMMA bearer-cln))
bearer-cln = realm / scope / authz-server / error /
auth-param
authz-server = "authz_server" EQUAL authz-server-value
authz-server-value = https-URI
realm = <defined in RFC3261>
auth-param = <defined in RFC3261>
scope = <defined in RFC6749>
error = <defined in RFC6749>
https-URI = <defined in RFC7230>
The authz-server parameter contains the HTTPS URI, as defined in [RFC7230], of the authorization server. The UAC can discover metadata about the AS using a mechanism like the one defined in [RFC8414].¶
The realm and auth-param parameters are defined in [RFC3261].¶
Per [RFC3261], the realm string alone defines the protection domain. [RFC3261] states that the realm string must be globally unique and recommends that the realm string contain a hostname or domain name. It also states that the realm string should be a human-readable identifier that can be rendered to the user.¶
The scope and error parameters are defined in [RFC6749].¶
The scope parameter could be used by the registrar/proxy to indicate to the UAC the minimum scope that must be associated with the access token to be able to get service. As defined in [RFC6749], the value of the scope parameter is expressed as a list of space-delimited, case-sensitive strings. The strings are defined by the authorization server. The values of the scope parameter are out of scope of this document. The UAC will use the scope provided by the registrar to contact the AS and obtain a proper token with the requested scope.¶
The error parameter could be used by the registrar/proxy to indicate to the UAC the reason for the error, with possible values of "invalid_token" or "invalid_scope".¶
The security considerations for OAuth are defined in [RFC6749]. The security considerations for bearer tokens are defined in [RFC6750]. The security considerations for JSON Web Tokens (JWT) are defined in [RFC7519]. These security considerations also apply to SIP usage of access token as defined in this document.¶
[RFC6749] mandates that access tokens are protected with TLS. However, TLS only guarantees hop-to-hop protection when used to protect SIP signaling. Therefore the access token MUST be protected in a way so that only authorized SIP endpoints will have access to it. Endpoints that support this specification MUST support encrypted JSON Web Tokens (JWT) [RFC7519] for encoding and protecting access tokens when included in SIP requests, unless some other mechanism is used to guarantee that only authorized SIP endpoints have access to the access token.¶
The authors would like to specially thank Paul Kyzivat for his multiple detailed reviews and suggested text that significantly improved the quality of the document.¶
The authors would also like to thank the following for their review and feedback on this document:¶
Olle Johansson, Roman Shpount, Dale Worley, and Jorgen Axell.¶
The authors would also like to thank the following for their review and feedback of the original document that was replaced with this document:¶
Andrew Allen, Martin Dolly, Keith Drage, Paul Kyzivat, Jon Peterson, Michael Procter, Roy Radhika, Matt Ryan, Ivo Sedlacek, Roman Shpount, Robert Sparks, Asveren Tolga, Dale Worley, and Yehoshua Gev.¶
The authors would also like to specially thank Jean Mahoney for her multiple reviews, editorial help, and the coversion of the XML source file from v2 to v3.¶