Requirements and Analysis of Media Security Management Protocols
draft-ietf-sip-media-security-requirements-01.txt

Status of this Memo

By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt.

The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html.

This Internet-Draft will expire on May 22, 2008.

Abstract

This documents describes requirements for a protocol to negotiate security context for SIP-signaled SRTP media. In addition to the natural security requirements, this negotiation protocol must interoperate well with SIP in certain ways. A number of proposals have been published and a summary of these proposals is in the appendix of this document.

Table of Contents

1.  Introduction
    1.1.  Document Organization
2.  Terminology
3.  Attack Scenarios
4.  Call Scenarios
    4.1.  Clipping Media Before Signaling Answer
    4.2.  Retargeting and Forking
    4.3.  Shared Key Conferencing
    4.4.  Recording
    4.5.  PSTN gateway
5.  Requirements
    5.1.  Key Management Protocol Requirements
    5.2.  Attack Scenario Requirements
    5.3.  Requirements Outside of the Key Management Protocol
6.  Security Considerations
7.  IANA Considerations
8.  Acknowledgements
9.  References
    9.1.  Normative References
    9.2.  Informative References
Appendix A.  Overview of Keying Mechanisms
    A.1.  Signaling Path Keying Techniques
        A.1.1.  MIKEY-NULL
        A.1.2.  MIKEY-PSK
        A.1.3.  MIKEY-RSA
        A.1.4.  MIKEY-RSA-R
        A.1.5.  MIKEY-DHSIGN
        A.1.6.  MIKEY-DHHMAC
        A.1.7.  MIKEY-ECIES and MIKEY-ECMQV (MIKEY-ECC)
        A.1.8.  Security Descriptions with SIPS
        A.1.9.  Security Descriptions with S/MIME
        A.1.10.  SDP-DH (expired)
        A.1.11.  MIKEYv2 in SDP (expired)
    A.2.  Media Path Keying Technique
        A.2.1.  ZRTP
    A.3.  Signaling and Media Path Keying Techniques
        A.3.1.  EKT
        A.3.2.  DTLS-SRTP
        A.3.3.  MIKEYv2 Inband (expired)
Appendix B.  Evaluation Criteria - SIP
    B.1.  Secure Retargeting and Secure Forking
    B.2.  Clipping Media Before SDP Answer
    B.3.  Centralized Keying
    B.4.  SSRC and ROC
Appendix C.  Evaluation Criteria - Security
    C.1.  Public Key Infrastructure
    C.2.  Perfect Forward Secrecy
    C.3.  Best Effort Encryption
    C.4.  Upgrading Algorithms
Appendix D.  Out-of-Scope
§  Authors' Addresses
§  Intellectual Property and Copyright Statements

1.  Introduction

The work on media security started when the Session Initiation Protocol (SIP) was still in its infancy. With the increased SIP deployment and the availability of new SIP extensions and related protocols, the need for end-to-end security was re-evaluated. The procedure of re-evaluating prior protocol work and design decisions is not an uncommon strategy and, to some extent, considered necessary protocol work to ensure that the developed protocols indeed meet the previously envisioned needs for the users in the Internet.

This document summarizes media security requirements, i.e., requirements for mechanisms that negotiate security context such as cryptographic keys and parameters for SRTP.

1.1.  Document Organization

The organization of this document is as follows: Section 2 (Terminology) introduces terminology, Section 3 (Attack Scenarios) describes various attack scenarios against the signaling path and media path, Section 4 (Call Scenarios) provides an overview about possible call scenarios, Section 5 (Requirements) lists requirements for media security. The main part of the document concludes with the security considerations Section 6 (Security Considerations), IANA considerations Section 7 (IANA Considerations) and an acknowledgement section in Section 8 (Acknowledgements). Appendix A (Overview of Keying Mechanisms) lists and compares available solution proposals. The following Appendix B (Evaluation Criteria - SIP) compares the different approaches regarding their suitability for the SIP signaling scenarios described in Appendix A (Overview of Keying Mechanisms), while Appendix C (Evaluation Criteria - Security) provides a comparison regarding security aspects. Appendix D (Out-of-Scope) lists non-goals for this document.

2.  Terminology

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119] (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.), with the important qualification that, unless otherwise stated, these terms apply to the design of the media security key management protocol, not its implementation or application.

Additionally, the following items are used in this document:

AOR (Address-of-Record):

A SIP or SIPS URI that points to a domain with a location service that can map the URI to another URI where the user might be available. Typically, the location service is populated through registrations. An AOR is frequently thought of as the "public address" of the user.

SSRC:

The 32-bit value that defines the synchronization source, used in RTP. These are generally unique, but collisions can occur.

two-time pad:

The use of the same key and the same key index to encrypt different data. For SRTP, a two-time pad occurs if two senders are using the same key and the same RTP SSRC value.

PKI:

Public Key Infrastructure (see [RFC3280] (Housley, R., Polk, W., Ford, W., and D. Solo, “Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile,” April 2002.))

Perfect Forward Secrecy (PFS):

The property that disclosure of the long-term secret keying material that is used to derive an agreed ephemeral key does not compromise the secrecy of agreed keys from earlier runs.

active adversary:

An active adversary attempts to alter system resources or affect their operation (see [RFC4949] (Shirey, R., “Internet Security Glossary, Version 2,” August 2007.)).

passive adversary:

A passive adversary attempts to learn or make use of information from a system but does not affect resources of that system (see [RFC4949] (Shirey, R., “Internet Security Glossary, Version 2,” August 2007.)).

signaling path:

The signaling path is the route taken by SIP signaling messages transmitted between the calling and called user agents. This can be either direct signaling between the calling and called user agents or, more commonly involves the SIP proxy servers that were involved in the call setup.

media path:

The media path is the route taken by media packets exchanged by the endpoints. In the simplest case, the endpoints exchange media directly, and the “media path” is defined by a quartet of IP addresses and TCP/UDP ports, along with an IP route. In other cases, this path may include RTP relays, mixers, transcoders, session border controllers, NATs, or media gateways.

3.  Attack Scenarios

The discussion in this section refers to requirements R6, R7, R14, R17, and R27.

This document classifies adversaries according to their access and their capabilities. An adversary might have access to:

1. only the media path,
2. only the signaling path,
3. both the media path and the signaling path.

An attacker that can solely be located along the signaling path, and does not have access to media (item 2), is not considered in this document.

There are two different types of adversaries, active and passive. An active adversary may need to be active with regard to the key exchange relevant information traveling along the media path or traveling along the signaling path.

Based on their robustness against the adversary capabilities described above, we can group security mechanisms using the following labels, ordered from least secure at the top to most secure at the bottom:

no-signaling-passive-media:

Access to only the media path is sufficient to reveal the content of the media traffic. This is how unencrypted RTP functions.

passive-signaling-passive-media:

Passive attack on the signaling and passive attack on the media path is necessary to reveal the content of the media traffic.

active-signaling-passive-media:

Active attack on the signaling path and passive attack on the media path is necessary to reveal the content of the media traffic.

active-signaling-active-media:

Active attack on both the signaling path and the media path is necessary to reveal the content of the media traffic.

detect-attack:

Active attack on both signaling and media path is necessary to reveal the content of the media traffic (active-signaling-active-media), but the attack is detectable by the end points when adversary tampers with the signaling and/or media messages.

For example, Security Descriptions (Andreasen, F., Baugher, M., and D. Wing, “Session Description Protocol (SDP) Security Descriptions for Media Streams,” July 2006.) [RFC4568], when protected by TLS (as it is commonly implemented and deployed), belongs in the passive-signaling-passive-media category since the adversary needs to learn the Security Descriptions key by seeing the SIP signaling message at a SIP proxy (assuming that the adversary is in control of the SIP proxy). The media traffic can be decrypted using that learned key.

As another example, DTLS-SRTP falls into active-signaling-active-media category when DTLS-SRTP is used with a public key based ciphersuite with self-signed certificates and without SIP-Identity (Peterson, J. and C. Jennings, “Enhancements for Authenticated Identity Management in the Session Initiation Protocol (SIP),” August 2006.) [RFC4474]. An adversary would have to modify the fingerprint that is sent along the signaling path and subsequently to modify the certificates carried in the DTLS handshake that travel along the media path. If DTLS-SRTP is used with SIP-Identity (Peterson, J. and C. Jennings, “Enhancements for Authenticated Identity Management in the Session Initiation Protocol (SIP),” August 2006.) [RFC4474] and protects both the offer and the answer, it would belong to the detect-attack category.

The above discussion of DTLS-SRTP demonstrates how a single security protocol can be in different classes depending on the mode in which it is operated. Other protocols can achieve similar effect by adding functions outside of the on-the-wire key management protocol itself. Although it may be appropriate to deploy lower-classed mechanisms in some cases, the ultimate security requirement for a media security negotiation protocol is that it have a mode of operation available in which it is detect-attack, which provides protection against the passive and active attacks and provides detection of such attacks. That is, there must be a way to use the protocol so that an active attack is required against both the signaling and media paths, and so that such attacks are detectable by the endpoints.

4.  Call Scenarios

The following subsections describe call scenarios that pose the most challenge to the key management system for media data in cooperation with SIP signaling.

4.1.  Clipping Media Before Signaling Answer

The discussion in this section refers to requirement R5.

Per the SDP Offer/Answer Model [RFC3264] (Rosenberg, J. and H. Schulzrinne, “An Offer/Answer Model with Session Description Protocol (SDP),” June 2002.),

"Once the offerer has sent the offer, it MUST be prepared to receive media for any recvonly streams described by that offer. It MUST be prepared to send and receive media for any sendrecv streams in the offer, and send media for any sendonly streams in the offer (of course, it cannot actually send until the peer provides an answer with the needed address and port information)."

To meet this requirement with SRTP, the offerer needs to know the SRTP key for arriving media. If either endpoint receives encrypted media before it has access to the associated SRTP key, it cannot play the media -- causing clipping.

For key exchange mechanisms that send the answerer's key in SDP, a SIP provisional response [RFC3261] (Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A., Peterson, J., Sparks, R., Handley, M., and E. Schooler, “SIP: Session Initiation Protocol,” June 2002.), such as 183 (session progress), is useful. However, the 183 messages are not reliable unless both the calling and called end point support PRACK [RFC3262] (Rosenberg, J. and H. Schulzrinne, “Reliability of Provisional Responses in Session Initiation Protocol (SIP),” June 2002.), use TCP across all SIP proxies, implement Security Preconditions [RFC5027] (Andreasen, F. and D. Wing, “Security Preconditions for Session Description Protocol (SDP) Media Streams,” October 2007.), or the both ends implement ICE [I‑D.ietf‑mmusic‑ice] (Rosenberg, J., “Interactive Connectivity Establishment (ICE): A Protocol for Network Address Translator (NAT) Traversal for Offer/Answer Protocols,” October 2007.) and the answerer implements the reliable provisional response mechanism described in ICE. Unfortunately, there is not wide deployment of any of these techniques and there is industry reluctance to set requirements regarding these techniques to avoid the problem described in this section.

Note that the receipt of an SDP answer is not always sufficient to allow media to be played to the offerer. Sometimes, the offerer must send media in order to open up firewall holes or NAT bindings before media can be received. In this case, even a solution that makes the key available before the SDP answer arrives will not help.

Fixes to early media might make the requirements to become obsolete, but at the time of writing no progress has been accomplished.

4.2.  Retargeting and Forking

The discussion in this section relates to requirements R1, R2, and R3.

In SIP, a request sent to a specific AOR but delivered to a different AOR is called a "retarget". A typical scenario is a "call forwarding" feature. In Figure 1 (Retargeting) Alice sends an Invite in step 1 that is sent to Bob in step 2. Bob responds with a redirect (SIP response code 3xx) pointing to Carol in step 3. This redirect typically does not propagate back to Alice but only goes to a proxy (i.e., the retargeting proxy) that sends the original Invite to Carol in step 4.

                +-----+
                |Alice|
                +--+--+
                   |
                   | Invite (1)
                   V
              +----+----+
              |  proxy  |
              ++-+-----++
               | ^     |
    Invite (2) | |     | Invite (4)
& redirect (3) | |     |
               V |     V
              ++-++   ++----+
              |Bob|   |Carol|
              +---+   +-----+

Using retargeting might lead to situations where the UAC does not know where its request will be going. This might not immediately seem like a serious problem; after all, when one places a telephone call on the PSTN, one never really knows if it will be forwarded to a different number, who will pick up the line when it rings, and so on. However, when considering SIP mechanisms for authenticating the called party, this function can also make it difficult to differentiate an intermediary that is behaving legitimately from an attacker. From this perspective, the main problems with retargeting ares:

Not detectable by the caller:

The originating user agent has no means of anticipating that the condition will arise, nor any means of determining that it has occurred until the call has already been set up, i.e. the negative consequences have already been realized.

Not preventable by the caller:

There is no existing security mechanism that might be employed by the originating user agent in order to guarantee that the call will not be re-targeted.

The mechanism used by SIP for identifying the calling party is SIP Identity [RFC3261] (Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A., Peterson, J., Sparks, R., Handley, M., and E. Schooler, “SIP: Session Initiation Protocol,” June 2002.). However, due to the nature of retargeting SIP Identity can only identify the calling party (that is, the party that initiated the SIP request). Some key exchange mechanisms predate SIP Identity and include their own identity mechanism. However, those built-in identity mechanism also suffer from the SIP retargeting problem. Going forward, Connected Identity (Elwell, J., “Connected Identity in the Session Initiation Protocol (SIP),” June 2007.) [RFC4916] allows identifying the called party.

In SIP, 'forking' is the delivery of a request to multiple locations. This happens when a single AOR is registered more than once. An example of forking is when a user has a desk phone, PC client, and mobile handset all registered with the same AOR.

         +-----+
         |Alice|
         +--+--+
            |
            | Invite
            V
      +-----+-----+
      |   proxy   |
      ++---------++
       |         |
Invite |         | Invite
       V         V
    +--+--+   +--+--+
    |Bob-1|   |Bob-2|
    +-----+   +-----+

With forking, both Bob-1 and Bob-2 might send back SDP answers in SIP responses. Alice will see those intermediate (18x) and final (200) responses. It is useful for Alice to be able to associate the SIP response with the incoming media stream. Although this association can be done with ICE [I‑D.ietf‑mmusic‑ice] (Rosenberg, J., “Interactive Connectivity Establishment (ICE): A Protocol for Network Address Translator (NAT) Traversal for Offer/Answer Protocols,” October 2007.), and ICE is useful to make this association with RTP, it is not desirable to require ICE to accomplish this association.

Forking and retargeting are often used together. For example, a boss and secretary might have both phones ring (forking) and rollover to voice mail if neither phone is answered (retargeting).

To maintain security of the media traffic, only the end point that answers the call should know the SRTP keys for the session. This is only an issue when the key management is encrypted with a key corresponding to the responder. It does not lead to problems with DH-based approaches. For key exchange mechanisms that do not provide secure forking or secure retargeting, one workaround is to re-key immediately after forking or retargeting. However, because the originator may not be aware that the call forked this mechanism requires rekeying immediately after every session is established. This doubles the number of messages processed by the network.

Retargeting securely introduces a more significant problem. With retargeting, the actual recipient of the request is not the original recipient. This means that if the offerer encrypted material (such as the session key or the SDP) using the original recipient's public key (or a shared secret established previously), the actual recipient will not be able to decrypt that material because the recipient won't have the original recipient's private key. In some cases, this is the intended behavior, i.e., you wanted to establish a secure connection with a specific individual. In other cases, it is not intended behavior (you want all voice media to be encrypted, regardless of who answers).

Further compounding this problem is a particularity of SIP that when forking is used, there is always only one final error response delivered to the sender of the request: the forking proxy is responsible for choosing which final response to choose in the event where forking results in multiple final error responses being received by the forking proxy. This means that if a request is rejected, say with information that the keying information was rejected and providing the far end's credentials, it is very possible that the rejection will never reach the sender. This problem, called the Heterogeneous Error Response Forking Problem (HERFP) (Mahy, R., “A Solution to the Heterogeneous Error Response Forking Problem (HERFP) in the Session Initiation Protocol (SIP),” March 2006.) [I‑D.mahy‑sipping‑herfp‑fix], is difficult to solve in SIP. Because we expect the HERFP to continue to be a problem in SIP for the foreseeable future, a media security system should function even in the presence of HERFP behavior.

4.3.  Shared Key Conferencing

The consensus on the RTPSEC mailing list was to concentrate on unicast, point-to-point sessions. Thus, there are no requirements related to shared key conferencing. This section is retained for informational purposes.

For efficient scaling, large audio and video conference bridges operate most efficiently by encrypting the current speaker once and distributing that stream to the conference attendees. Typically, inactive participants receive the same streams -- they hear (or see) the active speaker(s), and the active speakers receive distinct streams that don't include themselves. In order to maintain confidentiality of such conferences where listeners share a common key, all listeners must rekeyed when a listener joins or leaves a conference.

An important use case for mixers/translators is a conference bridge:

            +----+
A --- 1 --->|    |
  <-- 2 ----| M  |
            | I  |
B --- 3 --->| X  |
  <-- 4 ----| E  |
            | R  |
C --- 5 --->|    |
  <-- 6 ----|    |
            +----+

In the figure above, 1, 3, and 5 are RTP media contributions from Alice, Bob, and Carol, and 2, 4, and 6 are the RTP flows to those devices carrying the 'mixed' media.

Several scenarios are possible:

a.

Multiple inbound sessions: 1, 3, and 5 are distinct RTP sessions,

b.

Multiple outbound sessions: 2, 4, and 6 are distinct RTP sessions,

c.

Single inbound session: 1, 3, and 5 are just different sources within the same RTP session,

d.

Single outbound session: 2, 4, and 6 are different flows of the same (multi-unicast) RTP session

If there are multiple inbound sessions and multiple outbound sessions (scenarios a and b), then every keying mechanism behaves as if the mixer were an end point and can set up a point-to-point secure session between the participant and the mixer. This is the simplest situation, but is computationally wasteful, since SRTP processing has to be done independently for each participant. The use of multiple inbound sessions (scenario a) doesn't waste computational resources, though it does consume additional cryptographic context on the mixer for each participant and has the advantage of non-repudiation of the originator of the incoming stream.

To support a single outbound session (scenario d), the mixer has to dictate its encryption key to the participants. Some keying mechanisms allow the transmitter to determine its own key, and others allow the offerer to determine the key for the offerer and answerer. Depending on how the call is established, the offerer might be a participant (such as a participant dialing into a conference bridge) or the offerer might be the mixer (such as a conference bridge calling a participant). The use of offerless Invites may help some keying mechanisms reverse the role of offerer/answerer. A difficulty, however, is knowing a priori if the role should be reversed for a particular call.

4.4.  Recording

The discussion in this section relates to requirement R23.

Some business environments, such as stock brokers, banks, and catalog call centers, require recording calls with customers. This is the familiar "this call is being recorded for quality purposes" heard during calls to these sorts of businesses. In these environments, media recording is typically performed by an intermediate device (with RTP, this is typically implemented in a 'sniffer').

When performing such call recording with SRTP, the end-to-end security is compromised. This is unavoidable, but necessary because the operation of the business requires such recording. It is desirable that the media security is not unduly compromised by the media recording. The endpoint within the organization needs to be informed that there is an intermediate device and needs to cooperate with that intermediate device.

This scenario does not place a requirement directly on the key management protocol. The requirement could be met directly by the key management protocol (e.g., MIKEY-NULL or [RFC4568] (Andreasen, F., Baugher, M., and D. Wing, “Session Description Protocol (SDP) Security Descriptions for Media Streams,” July 2006.)) or through an external out-of-band-mechanism (e.g., [I‑D.wing‑sipping‑srtp‑key] (Wing, D., Audet, F., Fries, S., Tschofenig, H., and A. Johnston, “Secure Media Recording and Transcoding with the Session Initiation Protocol,” October 2008.)).

4.5.  PSTN gateway

The discussion in this section relates to requirement R26.

A typical case of using media security is the one where two entities are having a VoIP conversation over IP capable networks. However, there are cases where the other end of the communication is not connected to an IP capable network. In this kind of setting, there needs to be some kind of gateway at the edge of the IP network which converts the VoIP conversation to format understood by the other network. An example of such gateway is a PSTN gateway sitting at the edge of IP and PSTN networks.

If media security (e.g., SRTP protection) is employed in this kind of gateway-setting, then media security and the related key management needs to be terminated at the gateway. The other network (e.g., PSTN) may have its own measures to protect the communication, but this means that from media security point of view the media security is not employed end-to-end between the communicating entities.

5.  Requirements

This section is divided into several parts: requirements specific to the key management protocol (Section 5.1 (Key Management Protocol Requirements)), attack scenarios (Section 5.2 (Attack Scenario Requirements)), and requirements which can be met inside the key management protocol or outside of the key management protocol (Section 5.3 (Requirements Outside of the Key Management Protocol)).

5.1.  Key Management Protocol Requirements

SIP Forking and Retargeting, from Section 4.2 (Retargeting and Forking):

R1:

The media security key management protocol MUST support forking and retargeting when all endpoints are willing to use SRTP without causing the call setup to fail, unless the execution of the authentication and key exchange protocol leads to a failure (e.g., an unsuccessful authentication attempt).

R3:

The media security key management protocol MUST create distinct, independent cryptographic contexts for each endpoint in a forked session.

Security characteristics:

R8:

The media security key management protocol MUST be able to support perfect forward secrecy.

R9:

The media security key management protocol MUST support negotiation of SRTP cipher suites without incurring per-algorithm computational expense. This allows an offer to be built without incurring computational expense for each algorithm.

R12:

The media security key management protocol MUST NOT require 3rd parties to sign certificates.

R13:

The media security key management protocol SHOULD use algorithms that allow FIPS 140-2 (NIST, “Security Requirements for Cryptographic Modules,” June 2005.) [FIPS‑140‑2] certification.
Note that the United States Government can only purchase and use crypto implementations that have been validated by the FIPS-140 (NIST, “Security Requirements for Cryptographic Modules,” June 2005.) [FIPS‑140‑2] process:

"The FIPS-140 standard is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems, including voice systems. The adoption and use of this standard is available to private and commercial organizations."[cryptval] (NIST, “Cryptographic Module Validation Program,” December 2006.)

Some commercial organizations, such as banks and defense contractors, also require or prefer equipment which has validated by the FIPS-140 process.

R16:

The media security key management protocol SHOULD NOT introduce new denial of service vulnerabilities (e.g., the protocol should not request the endpoint to perform CPU-intensive operations without the client being able to validate or authorize the request).

R18:

If two parties share an authentication infrastructure, they SHOULD be able to make use of it.

R19:

The media security key management protocol MUST provide crypto-agility, i.e., the ability to adapt to evolving cryptography and security requirements (update of cryptographic algorithms without substantial disruption to deployed implementations)

R20:

The media security key management protocol MUST protect cipher suite negotiation against downgrading attacks.

R24:

<deleted>

Performance considerations:

R4:

The media security key management protocol MAY support the re-use of a previously established security context.
Specialized devices may need to avoid public key operations or Diffie-Hellman operations as much as possible because of the computational cost or because of the additional call setup delay. For example, it can take a second or two to perform a Diffie-Hellman operation in certain devices. Examples of these specialized devices would include some handsets, intelligent SIMs, and PSTN gateways. For the typical case because a phone call has not yet been established, ancillary processing cycles can be utilized to perform the PK or DH operation; for example, in a PSTN gateway the DSP, which is not yet involved with typical DSP operations, could be used to perform the calculation, so as to avoid having the central host processor perform the calculation. Some devices, such as handsets, and intelligent SIMs do not have such ancillary processing capability.

R11:

<Requirement R11 has been folded into R4.>

Media considerations:

R5:

The media security key management protocol SHOULD avoid clipping media before SDP answer without requiring PRACK [RFC3262] (Rosenberg, J. and H. Schulzrinne, “Reliability of Provisional Responses in Session Initiation Protocol (SIP),” June 2002.). This requirement comes from Section 4.1 (Clipping Media Before Signaling Answer).

R10:

If SRTP key negotiation is performed over the media path (i.e., using the same UDP/TCP ports as media packets), the key negotiation packets MUST NOT pass the RTP validity check defined in Appendix A.1 of [RFC3550] (Schulzrinne, H., Casner, S., Frederick, R., and V. Jacobson, “RTP: A Transport Protocol for Real-Time Applications,” July 2003.).

R15:

The media security key management protocol SHOULD allow endpoints to start with RTP and then upgrade to SRTP.
Issue: Does this mean [I‑D.ietf‑mmusic‑sdp‑capability‑negotiation] (Andreasen, F., “SDP Capability Negotiation,” March 2010.) (which overlaps with R1 and R2), allow RTP during early media (and upgrade to SRTP when the SDP answer arrives), or support an "Encrypt this call" button on the phone?

R21:

The media security key management protocol MUST allow a SIP User Agent to negotiate media security parameters for each individual session.

R25:

The media security key management protocol MUST work when there are intermediate nodes (e.g., transcoders), terminating or processing media, between the end points.
Issue: Unclear how requirement for transcoders is met.

R26:

The media security key management protocol MUST support termination of media security in a PSTN gateway. This requirement is from Section 4.5 (PSTN gateway).

5.2.  Attack Scenario Requirements

This section describes requirements from the attack scenarios (Section 3 (Attack Scenarios)).

Required for the passive-signaling-passive-media scenario:

R6:

The media security key management protocol MUST have a mode which prevents a passive adversary with access to the media path from gaining access to keying material used to protect SRTP media packets.

R7:

The media security key management protocol MUST have a mode in which it prevents a passive adversary with access to the signaling path from gaining access to keying material used to protect SRTP media packets.

Required for the active-signaling-passive-media scenario:

R14:

The media security key management protocol SHOULD include a mechanism for associating key management messages with both the signaling traffic that initiated the session and with protected media traffic. Allowing such an association also allows the SDP offerer to avoid performing CPU-consuming operations (e.g., DH or public key operations) with attackers that have not seen the signaling messages.
For example, if using a Diffie-Hellman keying technique with security preconditions that forks to 20 end points, the call initiator would get 20 provisional responses containing 20 signed Diffie-Hellman key pairs. Calculating 20 DH secrets and validating signatures can be a difficult task depending on the device capabilities. Hence, in the case of forking, it is not desirable to perform a DH or PK operation with every party, but rather only with the party that answers the call (and incur some media clipping). To do this, the signaling and media need to be associated so the calling party knows which key management needs to be completed. This might be done by using the transport address indicated in the SDP, although NATs can complicate this association.

Required for the active-signaling-active-media scenario:

R17:

The media security key management protocol SHOULD require the adversary to have access to the signaling path as well as the media path for a successful attack to be launched. An adversary that is located only along the data or only along the signaling path MUST NOT be able to successfully mount an attack. A successful attack refers to the ability for the adversary to obtain keying material to decrypt the SRTP encrypted media traffic.

Required for the detect-attack scenario::

R27:

The media security key management protocol SHOULD include information in the SDP that can be signed by SIP signaling and validated by the either party (e.g., SIP-Identity (Peterson, J. and C. Jennings, “Enhancements for Authenticated Identity Management in the Session Initiation Protocol (SIP),” August 2006.) [RFC4474] and SIP-Connected-Identity (Elwell, J., “Connected Identity in the Session Initiation Protocol (SIP),” June 2007.) [RFC4916]). This allows the both parties to validate the From: address. The called party can validate the From: address prior to accepting the call.

5.3.  Requirements Outside of the Key Management Protocol

The requirements in this section can be solved within the key management protocol itself, or can be solved outside of the key management protocol itself (e.g., solved in SIP or in SDP).

R2:

Even when some end points of a forked or retargeted call are incapable of using SRTP, the solution MUST be described which allows the establishment of SRTP associations with SRTP-capable endpoints and / or RTP associations with non-SRTP-capable endpoints. This requirement comes from Section 4.2 (Retargeting and Forking).

R23:

The media security key management protocol SHOULD be able to negotiate keys for SRTP sessions created via different call signaling protocols (e.g., between Jabber, SIP, H.323, MGCP).

R23:

A solution SHOULD be described which supports recording of decrypted media. This requirement comes from Section 4.4 (Recording).

6.  Security Considerations

This document lists requirements for securing media traffic. As such, it addresses security throughout the document.

7.  IANA Considerations

This document does not require actions by IANA.

8.  Acknowledgements

For contributions to the requirements portion of this document, the authors would like to thank the active participants of the RTPSEC BoF and on the RTPSEC mailing list. The authors would furthermore like to thank Wolfgang Buecker, Guenther Horn, Peter Howard, Hans-Heinrich Grusdt, Srinath Thiruvengadam, Martin Euchner, Eric Rescorla, Matt Lepinski, Dan York, Werner Dittmann, Richard Barnes, Vesa Lehtovirta, Colin Perkins, Peter Schneider, and Christer Holmberg for their feedback to this document.

For contributions to the analysis portion of this document, the authors would like to thank Special thanks to Steffen Fries and Dragan Ignjatic for their excellent MIKEY comparison document (Fries, S. and D. Ignjatic, “On the applicability of various MIKEY modes and extensions,” March 2008.) [I‑D.ietf‑msec‑mikey‑applicability]. The authors would furthermore like to thank Cullen Jennings, David Oran, David McGrew, Mark Baugher, Flemming Andreasen, Eric Raymond, Dave Ward, Leo Huang, Eric Rescorla, Lakshminath Dondeti, Steffen Fries, Alan Johnston, Dragan Ignjatic and John Elwell for their feedback to this document.

9.  References

9.1. Normative References

9.2. Informative References

Appendix A.  Overview of Keying Mechanisms

Based on how the SRTP keys are exchanged, each SRTP key exchange mechanism belongs to one general category:

signaling path:

All the keying is carried in the call signaling (SIP or SDP) path.

media path:

All the keying is carried in the SRTP/SRTCP media path, and no signaling whatsoever is carried in the call signaling path.

signaling and media path:

Parts of the keying are carried in the SRTP/SRTCP media path, and parts are carried in the call signaling (SIP or SDP) path.

One of the significant benefits of SRTP over other end-to-end encryption mechanisms, such as for example IPsec, is that SRTP is bandwidth efficient and SRTP retains the header of RTP packets. Bandwidth efficiency is vital for VoIP in many scenarios where access bandwidth is limited or expensive, and retaining the RTP header is important for troubleshooting packet loss, delay, and jitter.

Related to SRTP's characteristics is a goal that any SRTP keying mechanism to also be efficient and not cause additional call setup delay. Contributors to additional call setup delay include network or database operations: retrieval of certificates and additional SIP or media path messages, and computational overhead of establishing keys or validating certificates.

When examining the choice between keying in the signaling path, keying in the media path, or keying in both paths, it is important to realize the media path is generally 'faster' than the SIP signaling path. The SIP signaling path has computational elements involved which parse and route SIP messages. The media path, on the other hand, does not normally have computational elements involved, and even when computational elements such as firewalls are involved, they cause very little additional delay. Thus, the media path can be useful for exchanging several messages to establish SRTP keys. A disadvantage of keying over the media path is that interworking different key exchange requires the interworking function be in the media path, rather than just in the signaling path; in practice this involvement is probably unavoidable anyway.

A.1.  Signaling Path Keying Techniques

A.1.1.  MIKEY-NULL

MIKEY-NULL (Arkko, J., Carrara, E., Lindholm, F., Naslund, M., and K. Norrman, “MIKEY: Multimedia Internet KEYing,” August 2004.) [RFC3830] has the offerer indicate the SRTP keys for both directions. The key is sent unencrypted in SDP, which means the SDP must be encrypted hop-by-hop (e.g., by using TLS (SIPS)) or end-to-end (e.g., by using S/MIME).

MIKEY-NULL requires one message from offerer to answerer (half a round trip), and does not add additional media path messages.

A.1.2.  MIKEY-PSK

MIKEY-PSK (pre-shared key) [RFC3830] (Arkko, J., Carrara, E., Lindholm, F., Naslund, M., and K. Norrman, “MIKEY: Multimedia Internet KEYing,” August 2004.) requires that all endpoints share one common key. MIKEY-PSK has the offerer encrypt the SRTP keys for both directions using this pre-shared key.

MIKEY-PSK requires one message from offerer to answerer (half a round trip), and does not add additional media path messages.

A.1.3.  MIKEY-RSA

MIKEY-RSA (Arkko, J., Carrara, E., Lindholm, F., Naslund, M., and K. Norrman, “MIKEY: Multimedia Internet KEYing,” August 2004.) [RFC3830] has the offerer encrypt the keys for both directions using the intended answerer's public key, which is obtained from a PKI.

MIKEY-RSA requires one message from offerer to answerer (half a round trip), and does not add additional media path messages. MIKEY-RSA requires the offerer to obtain the intended answerer's certificate.

A.1.4.  MIKEY-RSA-R

MIKEY-RSA-R (Ignjatic, D., Dondeti, L., Audet, F., and P. Lin, “MIKEY-RSA-R: An Additional Mode of Key Distribution in Multimedia Internet KEYing (MIKEY),” November 2006.) [RFC4738] is essentially the same as MIKEY-RSA but reverses the role of the offerer and the answerer with regards to providing the keys. That is, the answerer encrypts the keys for both directions using the offerer's public key. Both the offerer and answerer validate each other's public keys using a PKI. MIKEY-RSA-R also enables sending certificates in the MIKEY message.

MIKEY-RSA-R requires one message from offerer to answer, and one message from answerer to offerer (full round trip), and does not add additional media path messages. MIKEY-RSA-R requires the offerer validate the answerer's certificate.

A.1.5.  MIKEY-DHSIGN

In MIKEY-DHSIGN (Arkko, J., Carrara, E., Lindholm, F., Naslund, M., and K. Norrman, “MIKEY: Multimedia Internet KEYing,” August 2004.) [RFC3830] the offerer and answerer derive the key from a Diffie-Hellman exchange. In order to prevent an active man-in-the-middle the DH exchange itself is signed using each endpoint's private key and the associated public keys are validated using a PKI.

MIKEY-DHSIGN requires one message from offerer to answerer, and one message from answerer to offerer (full round trip), and does not add additional media path messages. MIKEY-DHSIGN requires the offerer and answerer to validate each other's certificates. MIKEY-DHSIGN also enables sending the answerer's certificate in the MIKEY message.

A.1.6.  MIKEY-DHHMAC

MIKEY-DHHMAC (Euchner, M., “HMAC-Authenticated Diffie-Hellman for Multimedia Internet KEYing (MIKEY),” September 2006.) [RFC4650] uses a pre-shared secret to HMAC the Diffie-Hellman exchange, essentially combining aspects of MIKEY-PSK with MIKEY-DHSIGN, but without MIKEY-DHSIGN's need for a PKI to authenticate the Diffie-Hellman exchange.

MIKEY-DHHMAC requires one message from offerer to answerer, and one message from answerer to offerer (full round trip), and does not add additional media path messages.

A.1.7.  MIKEY-ECIES and MIKEY-ECMQV (MIKEY-ECC)

ECC Algorithms For MIKEY (Milne, A., “ECC Algorithms for MIKEY,” June 2007.) [I‑D.ietf‑msec‑mikey‑ecc] describes how ECC can be used with MIKEY-RSA (using ECDSA signature) and with MIKEY-DHSIGN (using a new DH-Group code), and also defines two new ECC-based algorithms, Elliptic Curve Integrated Encryption Scheme (ECIES) and Elliptic Curve Menezes-Qu-Vanstone (ECMQV) .

For the purposes of this paper, the ECDSA signature, MIKEY-ECIES, and MIKEY-ECMQV function exactly like MIKEY-RSA, and the new DH-Group code function exactly like MIKEY-DHSIGN. Therefore these ECC mechanisms aren't discussed separately in this paper.

A.1.8.  Security Descriptions with SIPS

Security Descriptions (Andreasen, F., Baugher, M., and D. Wing, “Session Description Protocol (SDP) Security Descriptions for Media Streams,” July 2006.) [RFC4568] has each side indicate the key it will use for transmitting SRTP media, and the keys are sent in the clear in SDP. Security Descriptions relies on hop-by-hop (TLS via "SIPS:") encryption to protect the keys exchanged in signaling.

Security Descriptions requires one message from offerer to answerer, and one message from answerer to offerer (full round trip), and does not add additional media path messages.

A.1.9.  Security Descriptions with S/MIME

This keying mechanism is identical to Appendix A.1.8 (Security Descriptions with SIPS), except that rather than protecting the signaling with TLS, the entire SDP is encrypted with S/MIME.

A.1.10.  SDP-DH (expired)

SDP Diffie-Hellman (Baugher, M. and D. McGrew, “Diffie-Hellman Exchanges for Multimedia Sessions,” February 2006.) [I‑D.baugher‑mmusic‑sdp‑dh] exchanges Diffie-Hellman messages in the signaling path to establish session keys. To protect against active man-in-the-middle attacks, the Diffie-Hellman exchange needs to be protected with S/MIME, SIPS, or SIP-Identity (Peterson, J. and C. Jennings, “Enhancements for Authenticated Identity Management in the Session Initiation Protocol (SIP),” August 2006.) [RFC4474] and [RFC4474] (Peterson, J. and C. Jennings, “Enhancements for Authenticated Identity Management in the Session Initiation Protocol (SIP),” August 2006.).

SDP-DH requires one message from offerer to answerer, and one message from answerer to offerer (full round trip), and does not add additional media path messages.

A.1.11.  MIKEYv2 in SDP (expired)

MIKEYv2 (Dondeti, L., “MIKEYv2: SRTP Key Management using MIKEY, revisited,” March 2007.) [I‑D.dondeti‑msec‑rtpsec‑mikeyv2] adds mode negotiation to MIKEYv1 and removes the time synchronization requirement. It therefore now takes 2 round-trips to complete. In the first round trip, the communicating parties learn each other's identities, agree on a MIKEY mode, crypto algorithm, SRTP policy, and exchanges nonces for replay protection. In the second round trip, they negotiate unicast and/or group SRTP context for SRTP and/or SRTCP.

Furthemore, MIKEYv2 also defines an in-band negotiation mode as an alternative to SDP (see Appendix A.3.3 (MIKEYv2 Inband (expired))).

A.2.  Media Path Keying Technique

A.2.1.  ZRTP

ZRTP (Zimmermann, P., Johnston, A., and J. Callas, “ZRTP: Media Path Key Agreement for Unicast Secure RTP,” April 2010.) [I‑D.zimmermann‑avt‑zrtp] does not exchange information in the signaling path (although it's possible for endpoints to indicate support for ZRTP with "a=zrtp" in the initial Offer). In ZRTP the keys are exchanged entirely in the media path using a Diffie-Hellman exchange. The advantage to this mechanism is that the signaling channel is used only for call setup and the media channel is used to establish an encrypted channel -- much like encryption devices on the PSTN. ZRTP uses voice authentication of its Diffie-Hellman exchange by having each person read digits to the other person. Subsequent sessions with the same ZRTP endpoint can be authenticated using the stored hash of the previously negotiated key rather than voice authentication.

ZRTP uses 4 media path messages (Hello, Commit, DHPart1, and DHPart2) to establish the SRTP key, and 3 media path confirmation messages. These initial messages are all sent as non-RTP packets.

Note that when ZRTP probing is used, unencrypted RTP is being exchanged until the SRTP keys are established.

A.3.  Signaling and Media Path Keying Techniques

A.3.1.  EKT

EKT (McGrew, D., Andreasen, F., Wing, D., and L. Dondeti, “Encrypted Key Transport for Secure RTP,” October 2009.) [I‑D.mcgrew‑srtp‑ekt] relies on another SRTP key exchange protocol, such as Security Descriptions or MIKEY, for bootstrapping. In the initial phase, each member of a conference uses an SRTP key exchange protocol to establish a common key encryption key (KEK). Each member may use the KEK to securely transport its SRTP master key and current SRTP rollover counter (ROC), via RTCP, to the other participants in the session.

EKT requires the offerer to send some parameters (EKT_Cipher, KEK, and security parameter index (SPI)) via the bootstrapping protocol such as Security Descriptions or MIKEY. Each answerer sends an SRTCP message which contains the answerer's SRTP Master Key, rollover counter, and the SRTP sequence number. Rekeying is done by sending a new SRTCP message. For reliable transport, multiple RTCP messages need to be sent.

A.3.2.  DTLS-SRTP

DTLS-SRTP (McGrew, D. and E. Rescorla, “Datagram Transport Layer Security (DTLS) Extension to Establish Keys for Secure Real-time Transport Protocol (SRTP),” February 2009.) [I‑D.ietf‑avt‑dtls‑srtp] exchanges public key fingerprints in SDP [I‑D.fischl‑sipping‑media‑dtls] (Fischl, J., “Datagram Transport Layer Security (DTLS) Protocol for Protection of Media Traffic Established with the Session Initiation Protocol,” July 2007.) and then establishes a DTLS session over the media channel. The endpoints use the DTLS handshake to agree on crypto suites and establish SRTP session keys. SRTP packets are then exchanged between the endpoints.

DTLS-SRTP requires one message from offerer to answerer (half round trip), and, if the offerer wishes to correlate the SDP answer with the endpoint, requires one message from answer to offerer (full round trip). DTLS-SRTP uses 4 media path messages to establish the SRTP key.

This paper assumes DTLS will use TLS_RSA_WITH_3DES_EDE_CBC_SHA as its cipher suite, which is the mandatory-to-implement cipher suite in TLS (Dierks, T. and E. Rescorla, “The Transport Layer Security (TLS) Protocol Version 1.1,” April 2006.) [RFC4346].

A.3.3.  MIKEYv2 Inband (expired)

As defined in Appendix A.1.11 (MIKEYv2 in SDP (expired)), MIKEYv2 also defines an in-band negotiation mode as an alternative to SDP (see Appendix A.3.3 (MIKEYv2 Inband (expired))). The details are not sorted out in the draft yet on what in-band actually means (i.e., UDP, RTP, RTCP, etc.).

Appendix B.  Evaluation Criteria - SIP

This section considers how each keying mechanism interacts with SIP features.

B.1.  Secure Retargeting and Secure Forking

Retargeting and forking of signaling requests is described within Section 4.2 (Retargeting and Forking). The following builds upon this description.

The following list compares the behavior of secure forking, answering association, two-time pads, and secure retargeting for each keying mechanism.

MIKEY-NULL

Secure Forking: No, all AORs see offerer's and answerer's keys. Answer is associated with media by the SSRC in MIKEY. Additionally, a two-time pad occurs if two branches choose the same 32-bit SSRC and transmit SRTP packets.
Secure Retargeting: No, all targets see offerer's and answerer's keys. Suffers from retargeting identity problem.

MIKEY-PSK

Secure Forking: No, all AORs see offerer's and answerer's keys. Answer is associated with media by the SSRC in MIKEY. Note that all AORs must share the same pre-shared key in order for forking to work at all with MIKEY-PSK. Additionally, a two-time pad occurs if two branches choose the same 32-bit SSRC and transmit SRTP packets.

Secure Retargeting: Not secure. For retargeting to work, the final target must possess the correct PSK. As this is likely in scenarios were the call is targeted to another device belonging to the same user (forking), it is very unlikely that other users will possess that PSK and be able to successfully answer that call.

MIKEY-RSA

Secure Forking: No, all AORs see offerer's and answerer's keys. Answer is associated with media by the SSRC in MIKEY. Note that all AORs must share the same private key in order for forking to work at all with MIKEY-RSA. Additionally, a two-time pad occurs if two branches choose the same 32-bit SSRC and transmit SRTP packets.

Secure Retargeting: No.

MIKEY-RSA-R

Secure Forking: Yes. Answer is associated with media by the SSRC in MIKEY.

Secure Retargeting: Yes.

MIKEY-DHSIGN

Secure Forking: Yes, each forked endpoint negotiates unique keys with the offerer for both directions. Answer is associated with media by the SSRC in MIKEY.

Secure Retargeting: Yes, each target negotiates unique keys with the offerer for both directions.

MIKEYv2 in SDP

The behavior will depend on which mode is picked.

MIKEY-DHHMAC

Secure Forking: Yes, each forked endpoint negotiates unique keys with the offerer for both directions. Answer is associated with media by the SSRC in MIKEY.

Secure Retargeting: Yes, each target negotiates unique keys with the offerer for both directions. Note that for the keys to be meaningful, it would require the PSK to be the same for all the potential intermediaries, which would only happen within a single domain.

Security Descriptions with SIPS

Secure Forking: No. Each forked endpoint sees the offerer's key. Answer is not associated with media.

Secure Retargeting: No. Each target sees the offerer's key.

Security Descriptions with S/MIME

Secure Forking: No. Each forked endpoint sees the offerer's key. Answer is not associated with media.

Secure Retargeting: No. Each target sees the offerer's key. Suffers from retargeting identity problem.

SDP-DH

Secure Forking: Yes. Each forked endpoint calculates a unique SRTP key. Answer is not associated with media.

Secure Retargeting: Yes. The final target calculates a unique SRTP key.

ZRTP

Secure Forking: Yes. Each forked endpoint calculates a unique SRTP key. As ZRTP isn't signaled in SDP, there is no association of the answer with media.

Secure Retargeting: Yes. The final target calculates a unique SRTP key.

EKT

Secure Forking: Inherited from the bootstrapping mechanism (the specific MIKEY mode or Security Descriptions). Answer is associated with media by the SPI in the EKT protocol. Answer is associated with media by the SPI in the EKT protocol.

Secure Retargeting: Inherited from the bootstrapping mechanism (the specific MIKEY mode or Security Descriptions).

DTLS-SRTP

Secure Forking: Yes. Each forked endpoint calculates a unique SRTP key. Answer is associated with media by the certificate fingerprint in signaling and certificate in the media path.

Secure Retargeting: Yes. The final target calculates a unique SRTP key.

MIKEYv2 Inband

The behavior will depend on which mode is picked.

B.2.  Clipping Media Before SDP Answer

Clipping media before receiving the signaling answer is described within Section 4.1 (Clipping Media Before Signaling Answer). The following builds upon this description.

Furthermore, the problem of clipping gets compounded when forking is used. For example, if using a Diffie-Hellman keying technique with security preconditions that forks to 20 endpoints, the call initiator would get 20 provisional responses containing 20 signed Diffie-Hellman half keys. Calculating 20 DH secrets and validating signatures can be a difficult task depending on the device capabilities.

The following list compares the behavior of clipping before SDP answer for each keying mechanism.

MIKEY-NULL

Not clipped. The offerer provides the answerer's keys.

MIKEY-PSK

Not clipped. The offerer provides the answerer's keys.

MIKEY-RSA

Not clipped. The offerer provides the answerer's keys.

MIKEY-RSA-R

Clipped. The answer contains the answerer's encryption key.

MIKEY-DHSIGN

Clipped. The answer contains the answerer's Diffie-Hellman response.

MIKEY-DHHMAC

Clipped. The answer contains the answerer's Diffie-Hellman response.

MIKEYv2 in SDP

The behavior will depend on which mode is picked.

Security Descriptions with SIPS

Clipped. The answer contains the answerer's encryption key.

Security Descriptions with S/MIME

Clipped. The answer contains the answerer's encryption key.

SDP-DH

Clipped. The answer contains the answerer's Diffie-Hellman response.

ZRTP

Not clipped because the session intially uses RTP. While RTP is flowing, both ends negotiate SRTP keys in the media path and then switch to using SRTP.

EKT

Not clipped, as long as the first RTCP packet (containing the answerer's key) is not lost in transit. The answerer sends its encryption key in RTCP, which arrives at the same time (or before) the first SRTP packet encrypted with that key.

Note: RTCP needs to work, in the answerer-to-offerer direction, before the offerer can decrypt SRTP media.

DTLS-SRTP

Not clipped. Keys are exchanged in the media path without relying on the signaling path.

MIKEYv2 Inband

Not clipped. Keys are exchanged in the media path without relying on the signaling path.

B.3.  Centralized Keying

Centralized keying is described within Section 4.3 (Shared Key Conferencing). The following builds upon this description.

The following list describes how each keying mechanism behaves with centralized keying (scenario d) and rekeying.

MIKEY-NULL

Keying: Yes, if offerer is the mixer. No, if offerer is the participant (end user).

Rekeying: Yes, via re-Invite

MIKEY-PSK

Keying: Yes, if offerer is the mixer. No, if offerer is the participant (end user).

Rekeying: Yes, with a re-Invite

MIKEY-RSA

Keying: Yes, if offerer is the mixer. No, if offerer is the participant (end user).

Rekeying: Yes, with a re-Invite

MIKEY-RSA-R

Keying: No, if offerer is the mixer. Yes, if offerer is the participant (end user).

Rekeying: n/a

MIKEY-DHSIGN

Keying: No; a group-key Diffie-Hellman protocol is not supported.

Rekeying: n/a

MIKEY-DHHMAC

Keying: No; a group-key Diffie-Hellman protocol is not supported.

Rekeying: n/a

MIKEYv2 in SDP

The behavior will depend on which mode is picked.

Security Descriptions with SIPS

Keying: Yes, if offerer is the mixer. Yes, if offerer is the participant.

Rekeying: Yes, with a Re-Invite.

Security Descriptions with S/MIME

Keying: Yes, if offerer is the mixer. Yes, if offerer is the participant.

Rekeying: Yes, with a Re-Invite.

SDP-DH

Keying: No; a group-key Diffie-Hellman protocol is not supported.

Rekeying: n/a

ZRTP

Keying: No; a group-key Diffie-Hellman protocol is not supported.

Rekeying: n/a

EKT

Keying: Yes. After bootstrapping a KEK using Security Descriptions or MIKEY, each member originating an SRTP stream can send its SRTP master key, sequence number and ROC via RTCP.

Rekeying: Yes. EKT supports each sender to transmit its SRTP master key to the group via RTCP packets. Thus, EKT supports each originator of an SRTP stream to rekey at any time.

DTLS-SRTP

Keying: Yes, because with the assumed cipher suite, TLS_RSA_WITH_3DES_EDE_CBC_SHA, each end indicates its SRTP key.

Rekeying: via DTLS in the media path.

MIKEYv2 Inband

The behavior will depend on which mode is picked.

B.4.  SSRC and ROC

In SRTP, a cryptographic context is defined as the SSRC, destination network address, and destination transport port number. Whereas RTP, a flow is defined as the destination network address and destination transport port number. This results in a problem -- how to communicate the SSRC so that the SSRC can be used for the cryptographic context.

Two approaches have emerged for this communication. One, used by all MIKEY modes, is to communicate the SSRCs to the peer in the MIKEY exchange. Another, used by Security Descriptions, is to use "late bindng" -- that is, any new packet containing a previously-unseen SSRC (which arrives at the same destination network address and destination transport port number) will create a new cryptographic context. Another approach, common amongst techniques with media-path SRTP key establishment, is to require a handshake over that media path before SRTP packets are sent. MIKEY's approach changes RTP's SSRC collision detection behavior by requiring RTP to pre-establish the SSRC values for each session.

Another related issue is that SRTP introduces a rollover counter (ROC), which records how many times the SRTP sequence number has rolled over. As the sequence number is used for SRTP's default ciphers, it is important that all endpoints know the value of the ROC. The ROC starts at 0 at the beginning of a session.

Some keying mechanisms cause a two-time pad to occur if two endpoints of a forked call have an SSRC collision.

Note: A proposal has been made to send the ROC value on every Nth SRTP packet[RFC4771] (Lehtovirta, V., Naslund, M., and K. Norrman, “Integrity Transform Carrying Roll-Over Counter for the Secure Real-time Transport Protocol (SRTP),” January 2007.). This proposal has not yet been incorporated into this document.

The following list examines handling of SSRC and ROC:

MIKEY-NULL

Each endpoint indicates a set of SSRCs and the ROC for SRTP packets it transmits.

MIKEY-PSK

Each endpoint indicates a set of SSRCs and the ROC for SRTP packets it transmits.

MIKEY-RSA

Each endpoint indicates a set of SSRCs and the ROC for SRTP packets it transmits.

MIKEY-RSA-R

Each endpoint indicates a set of SSRCs and the ROC for SRTP packets it transmits.

MIKEY-DHSIGN

Each endpoint indicates a set of SSRCs and the ROC for SRTP packets it transmits.

MIKEY-DHHMAC

Each endpoint indicates a set of SSRCs and the ROC for SRTP packets it transmits.

MIKEYv2 in SDP

Each endpoint indicates a set of SSRCs and the ROC for SRTP packets it transmits.

Security Descriptions with SIPS

Neither SSRC nor ROC are signaled. SSRC 'late binding' is used.

Security Descriptions with S/MIME

Neither SSRC nor ROC are signaled. SSRC 'late binding' is used.

SDP-DH

Neither SSRC nor ROC are signaled. SSRC 'late binding' is used.

ZRTP

Neither SSRC nor ROC are signaled. SSRC 'late binding' is used.

EKT

The SSRC of the SRTCP packet containing an EKT update corresponds to the SRTP master key and other parameters within that packet.

DTLS-SRTP

Neither SSRC nor ROC are signaled. SSRC 'late binding' is used.

MIKEYv2 Inband

Each endpoint indicates a set of SSRCs and the ROC for SRTP packets it transmits.

Appendix C.  Evaluation Criteria - Security

This section evaluates each keying mechanism on the basis of their security properties.

C.1.  Public Key Infrastructure

There are two aspects of PKI requirements -- one aspect is if PKI is necessary in order for the mechanism to function at all, the other is if PKI is used to authenticate a certificate. With interactive communications it is desirable to avoid fetching certificates that delay call setup; rather it is preferable to fetch or validate certificates in such a way that call setup isn't delayed. For example, a certificate can be validated while the phone is ringing or can be validated while ring-back tones are being played or even while the called party is answering the phone and saying "hello".

SRTP key exchange mechanisms that require a particular authentication infrastructure to operate are gated on the deployment of a such an infrastructure available to both endpoints. This means that no media security is achievable until such an infrastructure exists. For SIP, something like sip-certs (Jennings, C. and J. Fischl, “Certificate Management Service for The Session Initiation Protocol (SIP),” March 2010.) [I‑D.ietf‑sip‑certs] might be used to obtain the certificate of a peer.

Note: Even if sip-certs (Jennings, C. and J. Fischl, “Certificate Management Service for The Session Initiation Protocol (SIP),” March 2010.) [I‑D.ietf‑sip‑certs] was deployed, the retargeting problem (Secure Retargeting and Secure Forking) would still prevent successful deployment of keying techniques which require the offerer to obtain the actual target's public key.

The following list compares the PKI requirements of each keying mechanism, both if a PKI is required for the key exchange itself, and if PKI is only used to authenticate the certificate supplied in signaling.

MIKEY-NULL

PKI not used.

MIKEY-PSK

PKI not used; rather, all endpoints must have some way to exchange per-endpoint or per-system pre-shared keys.

MIKEY-RSA

The offerer obtains the intended answerer's public key before initiating the call. This public key is used to encrypt the SRTP keys. There is no defined mechanism for the offerer to obtain the answerer's public key, although [I‑D.ietf‑sip‑certs] (Jennings, C. and J. Fischl, “Certificate Management Service for The Session Initiation Protocol (SIP),” March 2010.) might be viable in the future.

MIKEY-RSA-R

The offer contains the offerer's public key. The answerer uses that public key to encrypt the SRTP keys that will be used by the offerer and the answerer. A PKI is necessary to validate the certificates.

MIKEY-DHSIGN

PKI is used to authenticate the public key that is included in the MIKEY message, by walking the CA trust chain.

MIKEY-DHHMAC

PKI not used; rather, all endpoints must have some way to exchange per-endpoint or per-system pre-shared keys.

MIKEYv2 in SDP

The behavior will depend on which mode is picked.

Security Descriptions with SIPS

PKI not used.

Security Descriptions with S/MIME

PKI is needed for S/MIME. The offerer must obtain the intended target's public key and encrypt their SDP with that key. The answerer must obtain the offerer's public key and encrypt their SDP with that key.

SDP-DH

PKI not used.

ZRTP

PKI not used.

EKT

PKI not used by EKT itself, but might be used by the EKT bootstrapping keying mechanism (such as certain MIKEY modes).

DTLS-SRTP

Remote party's certificate is sent in media path, and a fingerprint of the same certificate is sent in the signaling path.

MIKEYv2 Inband

The behavior will depend on which mode is picked.

C.2.  Perfect Forward Secrecy

In the context of SRTP, Perfect Forward Secrecy is the property that SRTP session keys that protected a previous session are not compromised if the static keys belonging to the endpoints are compromised. That is, if someone were to record your encrypted session content and later acquires either party's private key, that encrypted session content would be safe from decryption if your key exchange mechanism had perfect forward secrecy.

The following list describes how each key exchange mechanism provides PFS.

MIKEY-NULL

No PFS.

MIKEY-PSK

No PFS.

MIKEY-RSA

No PFS.

MIKEY-RSA-R

No PFS.

MIKEY-DHSIGN

PFS is provided with the Diffie-Hellman exchange.

MIKEY-DHHMAC

PFS is provided with the Diffie-Hellman exchange.

MIKEYv2 in SDP

The behavior will depend on which mode is picked.

Security Descriptions with SIPS

No PFS.

Security Descriptions with S/MIME

No PFS.

SDP-DH

PFS is provided with the Diffie-Hellman exchange.

ZRTP

PFS is provided with the Diffie-Hellman exchange.

EKT

No PFS.

DTLS-SRTP

PFS is achieved if the negotiated cipher suite includes an exponential or discrete-logarithmic key exchange (such as Diffie-Hellman or Elliptic Curve Diffie-Hellman (Blake-Wilson, S., Bolyard, N., Gupta, V., Hawk, C., and B. Moeller, “Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS),” May 2006.) [RFC4492]).

MIKEYv2 Inband

The behavior will depend on which mode is picked.

C.3.  Best Effort Encryption

With best effort encryption, SRTP is used with endpoints that support SRTP, otherwise RTP is used.

SIP needs a backwards-compatible best effort encryption in order for SRTP to work successfully with SIP retargeting and forking when there is a mix of forked or retargeted devices that support SRTP and don't support SRTP.

Consider the case of Bob, with a phone that only does RTP and a voice mail system that supports SRTP and RTP. If Alice calls Bob with an SRTP offer, Bob's RTP-only phone will reject the media stream (with an empty "m=" line) because Bob's phone doesn't understand SRTP (RTP/SAVP). Alice's phone will see this rejected media stream and may terminate the entire call (BYE) and re-initiate the call as RTP-only, or Alice's phone may decide to continue with call setup with the SRTP-capable leg (the voice mail system). If Alice's phone decided to re-initiate the call as RTP-only, and Bob doesn't answer his phone, Alice will then leave voice mail using only RTP, rather than SRTP as expected.

Currently, several techniques are commonly considered as candidates to provide opportunistic encryption:

multipart/alternative

[I‑D.jennings‑sipping‑multipart] (Wing, D. and C. Jennings, “Session Initiation Protocol (SIP) Offer/Answer with Multipart Alternative,” March 2006.) describes how to form a multipart/alternative body part in SIP. The significant issues with this technique are (1) that multipart MIME is incompatible with existing SIP proxies, firewalls, Session Border Controllers, and endpoints and (2) when forking, the Heterogeneous Error Response Forking Problem (HERFP) (Mahy, R., “A Solution to the Heterogeneous Error Response Forking Problem (HERFP) in the Session Initiation Protocol (SIP),” March 2006.) [I‑D.mahy‑sipping‑herfp‑fix] causes problems if such non-multipart-capable endpoints were involved in the forking.

SDP Grouping

A new SDP grouping mechanism (following the idea introduced in [RFC3388] (Camarillo, G., Eriksson, G., Holler, J., and H. Schulzrinne, “Grouping of Media Lines in the Session Description Protocol (SDP),” December 2002.)) has been discussed which would allow a media line to indicate RTP/AVP and another media line to indicate RTP/SAVP, allowing non-SRTP-aware endpoints to choose RTP/AVP and SRTP-aware endpoints to choose RTP/SAVP. As of this writing, this SDP grouping mechanism has not been published as an Internet Draft.

session attribute

With this technique, the endpoints signal their desire to do SRTP by signaling RTP (RTP/AVP), and using an attribute ("a=") in the SDP. This technique is entirely backwards compatible with non-SRTP-aware endpoints, but doesn't use the RTP/SAVP protocol registered by SRTP (Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K. Norrman, “The Secure Real-time Transport Protocol (SRTP),” March 2004.) [RFC3711].

SDP Capability Negotiation

SDP Capability Negotiation (Andreasen, F., “SDP Capability Negotiation,” March 2010.) [I‑D.ietf‑mmusic‑sdp‑capability‑negotiation] provides a backwards-compatible mechanism to allow offering both SRTP and RTP in a single offer. This is the preferred technique.

Probing

With this technique, the endpoints first establish an RTP session using RTP (RTP/AVP). The endpoints send probe messages, over the media path, to determine if the remote endpoint supports their keying technique.

The preferred technique, SDP Capability Negotiation (Andreasen, F., “SDP Capability Negotiation,” March 2010.) [I‑D.ietf‑mmusic‑sdp‑capability‑negotiation], can be used with all key exchange mechanisms. What remains unique is ZRTP, which can also accomplish its best effort encryption by probing (sending ZRTP messages over the media path) or by session attribute (see "a=zrtp", defined in Section 10 of [I‑D.zimmermann‑avt‑zrtp] (Zimmermann, P., Johnston, A., and J. Callas, “ZRTP: Media Path Key Agreement for Unicast Secure RTP,” April 2010.)). Current implementations of ZRTP use probing.

C.4.  Upgrading Algorithms

It is necessary to allow upgrading SRTP encryption and hash algorithms, as well as upgrading the cryptographic functions used for the key exchange mechanism. With SIP's offer/answer model, this can be computionally expensive because the offer needs to contain all combinations of the key exchange mechanisms (all MIKEY modes, Security Descriptions) and all SRTP cryptographic suites (AES-128, AES-256) and all SRTP cryptographic hash functions (SHA-1, SHA-256) that the offerer supports. In order to do this, the offerer has to expend CPU resources to build an offer containing all of this information which becomes computationally prohibitive.

Thus, it is important to keep the offerer's CPU impact fixed so that offering multiple new SRTP encryption and hash functions incurs no additional expense.

The following list describes the CPU effort involved in using each key exchange technique.

MIKEY-NULL

No significant computaional expense.

MIKEY-PSK

No significant computational expense.

MIKEY-RSA

For each offered SRTP crypto suite, the offerer has to perform RSA operation to encrypt the TGK

MIKEY-RSA-R

For each offered SRTP crypto suite, the offerer has to perform public key operation to sign the MIKEY message.

MIKEY-DHSIGN

For each offered SRTP crypto suite, the offerer has to perform Diffie-Hellman operation, and a public key operation to sign the Diffie-Hellman output.

MIKEY-DHHMAC

For each offered SRTP crypto suite, the offerer has to perform Diffie-Hellman operation.

MIKEYv2 in SDP

The behavior will depend on which mode is picked.

Security Descriptions with SIPS

No significant computational expense.

Security Descriptions with S/MIME

S/MIME requires the offerer and the answerer to encrypt the SDP with the other's public key, and to decrypt the received SDP with their own private key.

SDP-DH

For each offered SRTP crypto suite, the offerer has to perform a Diffie-Hellman operation.

ZRTP

The offerer has no additional computational expense at all, as the offer contains no information about ZRTP or might contain "a=zrtp".

EKT

The offerer's Computational expense depends entirely on the EKT bootstrapping mechanism selected (one or more MIKEY modes or Security Descriptions).

DTLS-SRTP

The offerer has no additional computational expense at all, as the offer contains only a fingerprint of the certificate that will be presented in the DTLS exchange.

MIKEYv2 Inband

The behavior will depend on which mode is picked.

Appendix D.  Out-of-Scope

Discussions concluded that key management for shared-key encryption of conferencing is outside the scope of this document. As the priority is point-to-point unicast SRTP session keying, resolving shared-key SRTP session keying is deferred to later and left as an item for future investigations.

Authors' Addresses

Full Copyright Statement

Copyright © The IETF Trust (2007).

This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.

This document and the information contained herein are provided on an “AS IS” basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.

Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr.

The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org.