Registration Protocols Extensions (regext) A. Newton Internet-Draft ICANN Updates: 7480, 9082, 9083 (if approved) J. Singh Intended status: Standards Track ARIN Expires: 23 March 2025 T. Harrison APNIC 19 September 2024 RDAP Extensions draft-ietf-regext-rdap-extensions-03 Abstract This document describes and clarifies the usage of extensions in RDAP. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 23 March 2025. Copyright Notice Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Newton, et al. Expires 23 March 2025 [Page 1] Internet-Draft rdap-extensions September 2024 Table of Contents 1. Background . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1. Summary of Updates . . . . . . . . . . . . . . . . . . . 3 1.2. Document Terms . . . . . . . . . . . . . . . . . . . . . 3 2. The RDAP Extension Identifier . . . . . . . . . . . . . . . . 3 3. Usage in Queries . . . . . . . . . . . . . . . . . . . . . . 5 4. Usage in JSON . . . . . . . . . . . . . . . . . . . . . . . . 6 4.1. Child JSON Values . . . . . . . . . . . . . . . . . . . . 7 4.2. Object Classes in Extensions . . . . . . . . . . . . . . 8 4.3. Search Results in Extensions . . . . . . . . . . . . . . 9 4.4. Bare Extension Identifiers . . . . . . . . . . . . . . . 10 5. Camel Casing . . . . . . . . . . . . . . . . . . . . . . . . 11 6. Two Classes of Extensions . . . . . . . . . . . . . . . . . . 11 7. Profile and Marker Extensions . . . . . . . . . . . . . . . . 12 8. Extension Versioning . . . . . . . . . . . . . . . . . . . . 13 8.1. Backwards-Compatible Changes . . . . . . . . . . . . . . 14 8.2. Backwards-Incompatible Changes . . . . . . . . . . . . . 14 9. Extension Identifiers in a Response . . . . . . . . . . . . . 14 10. Extension Definitions . . . . . . . . . . . . . . . . . . . . 15 11. Existing Extension Registrations . . . . . . . . . . . . . . 15 12. Redirects . . . . . . . . . . . . . . . . . . . . . . . . . . 16 13. Referrals . . . . . . . . . . . . . . . . . . . . . . . . . . 17 14. Extension Specification Content . . . . . . . . . . . . . . . 18 15. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 18 15.1. RDAP Extensions Registry . . . . . . . . . . . . . . . . 18 15.2. RDAP JSON Values Registry . . . . . . . . . . . . . . . 19 16. Security Considerations . . . . . . . . . . . . . . . . . . . 20 17. Privacy Considerations . . . . . . . . . . . . . . . . . . . 20 18. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 21 19. References . . . . . . . . . . . . . . . . . . . . . . . . . 21 19.1. Normative References . . . . . . . . . . . . . . . . . . 21 19.2. Informative References . . . . . . . . . . . . . . . . . 21 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 22 1. Background The Registration Data Access Protocol (RDAP) defines a uniform means to access data from Internet operations registries, specifically Domain Name Registries (DNRs), Regional Internet Registries (RIRs), and other registries serving Internet Number Resources (INRs). RDAP queries are defined in [RFC9082] and RDAP responses are defined in [RFC9083]. Newton, et al. Expires 23 March 2025 [Page 2] Internet-Draft rdap-extensions September 2024 RDAP contains a means to define extensions for queries not found in [RFC9082] and responses not found in [RFC9083]. RDAP extensions are also described in [RFC7480]. This document uniformly describes RDAP extensions, clarifies their usage, and defines additional semantics that were previously undefined or ambiguous. 1.1. Summary of Updates This document updates [RFC7480], [RFC9082], and [RFC9083] in the following areas: 1. Section 2 provides additional guidance on RDAP extension identifiers, registration of identifiers for the purpose of avoiding namespace collisions, and reserves a specific syntax for future use. 2. Section 3 clarifies the usage of extension identifiers in RDAP URLs and formally defines their usage with child path segments and query parameters. 3. Section 4 clarifies the usage of extension identifiers in JSON. 4. Section 4.2 and Section 4.3 disambiguates the definition of new object classes and search results by extensions in [RFC9082]. 5. This document describes the various styles and kinds of RDAP extensions and their extension identifiers. 6. This document describes extension versioning and changes to extensions that would make them incompatible or compatible with previous versions of an extension. 7. Section 12 and Section 13 discusses the uses of extensions with regard to RDAP redirects and referrals, including security and privacy considerations. 8. This document provides guidance to extension authors regarding the creation of extension specification. 9. Section 15.1 and Section 15.2 provide further guidance on registrations into the IANA RDAP registries and recommendations for the expert review processes for these registries. 1.2. Document Terms The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [BCP14] when, and only when, they appear in all capitals, as shown here. 2. The RDAP Extension Identifier Section 6 of [RFC7480] describes the identifier used to signify RDAP extensions and the IANA registry into which RDAP extensions are to be registered. Newton, et al. Expires 23 March 2025 [Page 3] Internet-Draft rdap-extensions September 2024 In brief, RDAP extensions identifiers start with an alphabetic character and may contain alphanumeric characters and "_" (underscore) characters. This formulation was explicitly chosen to allow compatibility with variable names in programming languages and transliteration with XML. When in use in RDAP, extension identifiers are prepended to URL path segments, URL query parameters, and JSON object member names (herein further referred to as "JSON names"). In all cases, the extension identifier acts as a namespace preventing collisions between extension elements. Additionally, implementers and operators can use the extension identifiers to find an extensions definition (via the IANA registry). RDAP extension identifiers have no explicit structure and are opaque in that no inner-meaning can be "seen" in them. This document restricts the syntax of RDAP extension identifiers from containing two consecutive "_" (underscore) characters and reserves their use for the future definition of structure (such as to define a versioning scheme). That is, RDAP extensions MUST NOT define an identifier with two consecutive underscore characters ("__") unless explicitly adhering to an RFC describing such usage. RDAP extensions MUST NOT define an extension identifier that when prepended to an underscore character may collide with an existing extension identifier. For example, if there were a pre-existing identifier of "foo_bar", another extension could not define the identifier "foo". Likewise, if there were a pre-existing identifier of "foo_bar", another extension could not define the identifier "foo_bar_buzz". However, an extension could define "foo" if "foobar" pre-existed and vice versa. For this reason, usage of an underscore character in RDAP extension identifiers is NOT RECOMMENDED. Implementers should be aware that many existing extension identifiers do contain underscore characters. [RFC7480] does not explicitly state that extension identifiers are case-sensitive. This document updates the formulation in [RFC7480] to explicitly note that extension identifiers are case-sensitive, and extension identifiers MUST NOT be registered where a new identifier is a mixed-case version of an existing identifier. For example, if "lunarNIC" is already registered as an identifier, a new registration with "lunarNic" (note the lowercase if "ic" in "Nic") is not allowed. Newton, et al. Expires 23 March 2025 [Page 4] Internet-Draft rdap-extensions September 2024 3. Usage in Queries Section 5 of [RFC9082] describes the use of extension identifiers in formulating URIs to query RDAP servers. The extension identifiers are to be prepended to the path segments they use. For example, if an extension uses the identifier "foobar", then the path segments used in that extension are prepended with "foobar_". If the "foobar" extension defines paths "fizz" and "fazz", the URIs for this extension might take the following form: https://base.example/foobar_fizz https://base.example/foobar_fazz While [RFC9082] describes the extension identifier as a prepended string to a path segment, it does not describe the usage of the extension identifier as a path segment which may have child path segments. This document updates [RFC9082] to allow the usage of extension identifiers as path segments which may have child path segments. For example, if the "foobar" extension defines the child paths "fizz" and "fazz", the URIs for this extension would take the following forms: https://base.example/foobar/fizz https://base.example/foobar/fazz Extensions defining new URI paths MUST explicitly define the expected response to each new URI path. New URI paths may return existing object classes or search results as defined in [RFC9083], object classes or search results defined by the extension (see Section 4.2 and Section 4.3 below), or object classes or search results from other extensions. Although [RFC9082] describes the use of URI query strings, it does not define their use with extensions. [RFC7480] instructs servers to ignore unknown query parameters. Therefore, the use of query parameters, prefixed or not with an extension identifier, is undefined as defined in [RFC9082] and [RFC7480]. Despite this, there are several extensions that do specify query parameters. This document updates [RFC9082] with regard to the use of RDAP extension identifiers in URL query parameters. When an RDAP extension defines query parameters to be used with a URL path that is not defined by that RDAP extension, those query parameter names SHOULD be constructed in the same manner as URL path segments (that is, extensions ID + '_' + parameter name). See section Section 6 regarding when usage of an extension identifier is required. Newton, et al. Expires 23 March 2025 [Page 5] Internet-Draft rdap-extensions September 2024 When an RDAP extension defines query parameters to be used with a URL path defined by that RDAP extension, prefixing of query parameters is not required. See Section 12 and Section 13 for other guidance on the use of query parameters, and see Section 16 and Section 17 regarding the constraints on the usage of query parameters. 4. Usage in JSON Section 2 of [RFC9083] describes the use of extension identifiers in the JSON returned by RDAP servers. Just as in URIs, the extension identifier is prepended to JSON names to create a namespace so that the JSON name from one extension will not collide with the JSON name of another extension. And just as with unknown query parameters in URIs, clients are to ignore unknown JSON names. The example given in [RFC9083] is as follows: { "handle": "ABC123", "lunarNIC_beforeOneSmallStep": "TRUE THAT!", "remarks": [ { "description": [ "She sells sea shells down by the sea shore.", "Originally written by Terry Sullivan." ] } ], "lunarNIC_harshMistressNotes": [ "In space,", "nobody can hear you scream." ] } In this example, the extension identified by "lunarNIC" is prepended to the names of both a JSON string and a JSON array. As Section 4.1 of [RFC9083] requires the use of the rdapConformance data structure and the objectClassName string is required of all object class instances, the complete example from above would be: Newton, et al. Expires 23 March 2025 [Page 6] Internet-Draft rdap-extensions September 2024 { "rdapConformance": [ "rdap_level_0", "lunarNIC" ], "objectClassName": "domain", "handle": "ABC123", "ldhName": "example.com", "lunarNIC_beforeOneSmallStep": "TRUE THAT!", "remarks": [ { "description": [ "She sells sea shells down by the sea shore.", "Originally written by Terry Sullivan." ] } ], "lunarNIC_harshMistressNotes": [ "In space,", "nobody can hear you scream." ] } 4.1. Child JSON Values Prefixing of the extension identifier is not required of children of a prefixed JSON object defined by an RDAP extension. The following example shows this use with a JSON object. Newton, et al. Expires 23 March 2025 [Page 7] Internet-Draft rdap-extensions September 2024 { "rdapConformance": [ "rdap_level_0", "lunarNIC" ], "objectClassName": "domain", "ldhName": "example.com", "remarks": [ { "description": [ "She sells sea shells down by the sea shore.", "Originally written by Terry Sullivan." ] } ], "lunarNIC_author": { "firstInitial": "R", "lastName": "Heinlein" } } Here the JSON name "lunarNIC_author" will separate the JSON from other extensions that may have an "author" structure. But the JSON contained within "lunarNIC_author" need not be prepended as the extension collision is avoided by "lunarNIC_author". 4.2. Object Classes in Extensions As described in [RFC9082] and Section 3, an extension may define new paths in URIs. If the extension describes the behavior of an RDAP query using that path to return a new RDAP object class, the JSON names are not required to be prepended with the extension identifier as described in Section 4.1. However, the extension MUST define the value for the objectClassName string which is used by clients to evaluate the type of the response. To avoid collisions with object classes defined in other extensions, the value for the objectClassName MUST either be prepended with the extension identifier or be the extension identifier in cases where the extension defines only one object class. Newton, et al. Expires 23 March 2025 [Page 8] Internet-Draft rdap-extensions September 2024 { "rdapConformance": [ "rdap_level_0", "lunarNIC" ], "objectClassName": "lunarNIC_author", "author": { "firstInitial": "R", "lastName": "Heinlein" } } It is RECOMMENDED that object class names be lowercased, ASCII characters that use the "_" (underscore) character as a word separator. Though objectClassName is a string and [RFC9083] does define one object class name with a space separator (i.e. "ip network"), usage of the space character or any whitespace or any other character that requires URL-encoding is NOT RECOMMENDED. When object class names are also used in URIs, extensions MUST specify that the names are to be URL-encoded as defined in [RFC3986] if the object class names contain any characters requiring URL-encoding. 4.3. Search Results in Extensions As described in [RFC9082] and Section 3, an extension may define new paths in URIs. If the extension describes the behavior of an RDAP query using the path to return a new RDAP search result, the JSON name of the search result MUST be prepended with the extension identifier (to avoid collision with search results defined in other extensions). If the search result contains object class instances defined by the extension, each instance must have an objectClassName string as defined in Section 4.2. Newton, et al. Expires 23 March 2025 [Page 9] Internet-Draft rdap-extensions September 2024 { "rdapConformance": [ "rdap_level_0", "lunarNIC" ], "lunarNIC_authorSearchResult": [ { "objectClassName": "lunarNIC_author", "author": { "firstInitial": "R", "lastName": "Heinlein" } }, { "objectClassName": "lunarNIC_author", "author": { "firstInitial": "J", "lastName": "Pournelle" } }, ] } 4.4. Bare Extension Identifiers Some RDAP extensions define only one JSON value and do not prefix it with their RDAP extension identifier; instead using the extension identifier as the JSON name for that JSON value. That is, the extension identifier is used "bare" and not appended with an underscore character and subsequent names. Consider the example in Section 4.1. Using the bare extension identifier pattern, that example could be written as: Newton, et al. Expires 23 March 2025 [Page 10] Internet-Draft rdap-extensions September 2024 { "rdapConformance": [ "rdap_level_0", "lunarNIC" ], "objectClassName": "domain", "ldhName": "example.com", "remarks": [ { "description": [ "She sells sea shells down by the sea shore.", "Originally written by Terry Sullivan." ] } ], "lunarNIC": { "firstInitial": "R", "lastName": "Heinlein" } } Usage of a bare extension identifier contravenes the guidance in [RFC9083]. This document updates [RFC9083] to explicitly allow this pattern. 5. Camel Casing The styling convention used in [RFC9083] for JSON names is often called "camel casing", in reference to the hump of a camel. In this style, the first letter of every word, except the first word, composing a name is capitalized. This convention was adopted to visually separate the namespace from the name, with an underscore between them. Though there is no explicit guidance to use camel case names, extensions would be wise to continue the style. 6. Two Classes of Extensions Though all RDAP extensions are to be registered in the IANA RDAP extensions registry, there is an implicit two-class system of extensions that comes from the inherit ownership of the RDAP specifications by the IETF: extensions created by the IETF and extensions not created by the IETF. Newton, et al. Expires 23 March 2025 [Page 11] Internet-Draft rdap-extensions September 2024 In the perspective of how extensions identifiers are used as namespace separators, extensions created by the IETF are not required to be prefixed with an extension identifier as the IETF can coordinate its own activities to avoid name collisions. In practice, most extensions owned by the IETF do use extension identifiers. RDAP extensions not defined by the IETF MUST use the extension identifier as a prefix in accordance with this document, [RFC7480], [RFC9082], and [RFC9083]. And RDAP extensions defined by the IETF SHOULD use the extension identifier as a prefix or as a bare extension identifier (see Section 4.4). IETF-defined RDAP extensions that do not follow this guidance MUST describe the necessity to do so. In addition, RDAP extensions defined by the IETF are allowed to define new types in the RDAP JSON Values Registry (see Section 15.2). 7. Profile and Marker Extensions Extensions are not required to extend the JSON or URL components of RDAP. While the RDAP extension mechanism was created to extend RDAP queries and/or responses, extensions can also be used to signal server policy (for example, specifying the conditions of use for existing response structures). Extensions that are primarily about signaling server policy are often called "profiles". Some extensions exist to denote the usage of values placed into an IANA registry, such as the IANA RDAP registries, or the usage of extensions for specifications used in RDAP responses such as extended vCard/jCard properties. Such extensions exist to "mark" these usages and are often called "marker" extensions. For example, an extension may be used to signal desired processing of a rel attribute in a "links" array, where the rel value is registered in the Link Relations Registry (https://www.iana.org/assignments/ link-relations/link-relations.xhtml (https://www.iana.org/assignments/link-relations/link- relations.xhtml)). Newton, et al. Expires 23 March 2025 [Page 12] Internet-Draft rdap-extensions September 2024 { "rdapConformance": [ "rdap_level_0", "lunarNIC" ], "objectClassName": "domain", "ldhName": "example.com", "links": [ { "value": "https://example.com/domain/example.com", "href": "https://example.com/sideways_href", "rel": "sideways", "type": "application/rdap+json" } ] } When defining the usage link relations, extensions should specify the media types expected to be used with those link relations. Regardless of the category of these extensions, their usage may also leverage the appearance of their identifiers in the rdapConformance array. Clients may use the /help query as defined in [RFC9082] to discover the extensions available. 8. Extension Versioning As stated in Section 2, RDAP extensions are opaque, and they possess no explicit version despite the fact that some extension identifiers include trailing numbers. That is, RDAP extensions without an explicitly defined versioning scheme are opaquely versioned. For example, fizzbuzz_1 may be the successor to fizzbuzz_0, but it may also be an extension for a completely separate purpose. Only consultation of the definition of fizzbuzz_1 will determine its relationship with fizzbuzz_0. Additionally, fizzbuzz_99 may be the predecessor of fizzbuzz_0. If a future RFC defines a versioning scheme (such as using the mechanism defined in Section 2), an RDAP extension definition MUST explicitly denote this compliance. Newton, et al. Expires 23 March 2025 [Page 13] Internet-Draft rdap-extensions September 2024 8.1. Backwards-Compatible Changes If an RDAP extension author wants to publish a new version of an extension that is backwards-compatible with the previous version, then one option is for the new version of the extension to define a new identifier, as well as requiring that both the previous identifier and the new identifier be included in the "rdapConformance" array of responses. That way, clients relying on the previous version of the extension will continue to function as intended, while clients wanting to make use of the newer version of the extension can check for the new identifier in the response. This approach can be used for an arbitrary number of new backwards- compatible versions of a given extension. For an extension with a large number of backwards-compatible successor versions, this may lead to a large number of identifiers being included in responses. An extension author may consider excluding older identifiers from the set required by new successor versions, based on data about client use/support or similar. 8.2. Backwards-Incompatible Changes With the current extension model, an extension with a backwards- incompatible change is indistinguishable from a new, unrelated extension. Implementers of such changes should consider the following: * whether the new version of the extension can be provided alongside the old version of the extension, so that a service can simply support both during a transition period; * whether some sort of client signaling should be supported, so that clients can opt for the old or new version of the extension in responses that they receive (see [I-D.newton-regext-rdap-x-media-type] for an example of how this might work); and * whether the extension itself should define how versioning is handled within the extension documentation. 9. Extension Identifiers in a Response Extension specifications have customarily defined only one extension identifier. However, there is no explicit limit on the number of extension identifiers that may be defined in a single extension specification. One example is [I-D.ietf-regext-rdap-rir-search]. Section 4.1 offers the following guidance on using the extension identifiers in RDAP responses: Newton, et al. Expires 23 March 2025 [Page 14] Internet-Draft rdap-extensions September 2024 A response to a "help" request will include identifiers for all of the specifications supported by the server. A response to any other request will include only identifiers for the specifications used in the construction of the response. A strict interpretation of this wording where "construction of the response" only refers to the JSON syntax would rule out the usage of Section 7 extension IDs which are in common use in RDAP. This document updates the guidance. For responses to queries other than "help", a response MUST include in the rdapConformance array only those extension identifiers necessary for a client to deserialize the JSON and understand the semantic meaning of the content within the JSON, and all extensions identifiers MUST be free from conflict in both their syntactic and semantic meaning. Note that this document does not update the guidance from Section 4.1 regarding "help" responses and the rdapConformance array. When a server implementation supports multiple extensions, it is RECOMMENDED that the server also support and return versioning information such as that defined by [I-D.gould-regext-rdap-versioning]. 10. Extension Definitions Extensions must be documented in an RFC or in some other permanent and readily available reference, in sufficient detail that interoperability between independent implementations is possible. Though RDAP gives each extension its own namespace, the definition of an extension may re-use definitions found in the base RDAP specification or in any other properly registered extension. [RFC9083] notes that the extension identifiers provide a "hint" to the client as to how to interpret the response. This wording does not intentionally restrict the extension to defining only JSON values within the extension's namespace. Therefore, an extension may define the use of its own JSON values together with the use of JSON values from other extensions or RDAP specifications. As with the ICANN profile or NRO profile extensions, the extension may simply signal policy applied to already defined RDAP structures. 11. Existing Extension Registrations The following extensions have been registered with IANA, but do not comply with the requirements set out in the base specifications, as clarified by this document: * Extension identifier: fred Newton, et al. Expires 23 March 2025 [Page 15] Internet-Draft rdap-extensions September 2024 - RDAP conformance value: fred_version_0 - Field/path prefix: fred * Extension identifier: artRecord - RDAP conformance value: artRecord_level_0 - Field/path prefix: artRecord * Extension identifier: platformNS - RDAP conformance value: platformNS_level_0 - Field/path prefix: platformNS * Extension identifier: regType - RDAP conformance value: regType_level_0 - Field/path prefix: regType Client authors should be aware that responses that make use of these extensions may require special handling on the part of the client. Also, while these extensions will be retained in the registry, future extensions that are similarly non-compliant will not be registered. To avoid any confusion with the operation of the existing entries, an extension registration that attempts to use one of the RDAP conformance values given in this section as an extension identifier (and so as an RDAP conformance value also) will be rejected. 12. Redirects [RFC7480] describes the use of redirects in RDAP. Redirects are prominent in the discovery of authoritative RIR servers as the process outlined in [RFC9224], which uses IANA allocations, does not account for transfers of resources between RIRs. Section 4.3 instructs servers to ignore unknown query parameters. As it relates to issuing URLs for redirects, servers MUST NOT blindly copy query parameters from a request to a redirect URL as query parameters may contain sensitive information, such as security credentials, not relevant to the target server of the URL. Following the advice in [RFC7480], servers SHOULD only place query parameters in redirect URLs when it is known by the origin server (the server issuing the redirect) that the target server (the server referenced by the redirect) can process the query parameter and the contents of the query parameter are appropriate to be received by the target. Newton, et al. Expires 23 March 2025 [Page 16] Internet-Draft rdap-extensions September 2024 As it is unlikely that every server in a cross-authority, redirect scenario will be upgraded to process every new extension, extensions should not solely rely on query parameters to convey information about a resource as query parameters are not guaranteed to survive a redirect. This does not mean extensions are prohibited from using query parameters, but rather that the use of query parameters must be applied for the scenarios appropriate for the use of the extension. Therefore, extensions SHOULD NOT rely on query parameters when the extension is to be used in scenarios requiring clients to find authoritative servers, such as that described above, or other scenarios using redirects among servers of differing authorities. Extensions MAY use query parameters in scenarios where the client has a priori knowledge of the authoritative server to which queries are to be sent. Such scenarios are generally queries intended to yield multiple results, authentication or authorization, and other scenarios where the behavior of requests across multiple authorities is undefined. In general, extension authors should be mindful of situations requiring clients to directly handle redirects at the RDAP layer. Some clients may not be utilizing HTTP libraries that provide such an option, and many HTTP client libraries that do provide the option do not provide it as a default behavior. Additionally, requiring clients to handle redirects at the RDAP layer adds complexity to the client in that additional logic must be implemented to handle redirect loops, parameter deconfliction, and URL encoding. The guidance given in Section 5.2 of [RFC7480] exists to simplify clients, especially those constructed with shell scripts and HTTP command-line utilities. 13. Referrals It is common in the RDAP ecosystem to link from one RDAP resource to another, such as can be found in domain registrations in gTLD DNRs. These are typically conveyed in the link structure defined in Section 4.2 of [RFC9083] and use the "application/rdap+json" media type. { "value": "https://regy.example/domain/foo.example", "rel": "related", "href": "https://regr.example/domain/foo.example", "type": "application/rdap+json" } Newton, et al. Expires 23 March 2025 [Page 17] Internet-Draft rdap-extensions September 2024 Extensions MUST explicitly define any required behavioral changes to the processing of referrals, otherwise clients MUST assume the information provided by referrals requires no additional processing or modification to use in the dereferencing of the referral. 14. Extension Specification Content The primary purpose of an RDAP extension specification is to aid in the implementation of RDAP clients. These specifications should consider the following content guidelines: 1. Examples of RDAP JSON should be generously given, especially in areas of the specification which may be complex or difficult to describe with prose. 2. Normative references, i.e. references to materials that are required for the interoperability of the extension, should be stable and non-changing. 3. Extension specifications should strongly consider making the use of HTTPS with RDAP mandatory if appropriate. 15. IANA Considerations 15.1. RDAP Extensions Registry [RFC7480] defines the RDAP Extensions Registry (https://www.iana.org/assignments/rdap-extensions/rdap- extensions.xhtml (https://www.iana.org/assignments/rdap-extensions/ rdap-extensions.xhtml)). This document does not change the RDAP Extensions Registry nor its purpose. However, this document does update the procedures to be used by its expert reviewers. The RDAP Extensions Registry should have as a minimum three expert reviewers and ideally four or five. An expert reviewer assigned to the review of an RDAP extension registration must have another expert reviewer double check any submitted registration. Expert reviewers are to use the following criteria for extensions defined in this document, which include but are not limited to: 1. Does the extension define an extension identifier following the naming conventions described in Section 2 and Section 5? For any recommendations regarding naming conventions (guidance given using RECOMMENDED, SHOULD, etc.), does the extension describe the need for departing from the established convention? 2. If the extension defines new queries, does it clearly describe the expected results of each new query? 3. Does the extension follow the JSON naming as described in Section 4? Newton, et al. Expires 23 March 2025 [Page 18] Internet-Draft rdap-extensions September 2024 4. If the extension is a newer version of an older extension, does the extension specification clearly describe if it is backwards- compatible (see Section 8.1) or backwards-incompatible (see Section 8.2). 5. If the extension registers new values in an IANA registry used by RDAP, does it describe how a client is to use those values? Extension authors are encouraged but not required to seek an informal review of their extension by sending a request for review to regext@ietf.org. 15.2. RDAP JSON Values Registry Section 10.2 defines the RDAP JSON Values Registry in IANA (https://www.iana.org/assignments/rdap-json-values/rdap-json- values.xhtml). This registry contains values to be used in the JSON values of RDAP responses. Registrations into this registry may occur in IETF-defined RDAP extensions or via requests to the IANA. Authors of RDAP extensions not defined by the IETF MAY register values in this registry via requests to the IANA. This document does not change the RDAP JSON Values Registry nor its purpose. However, this document does update the procedures for registrations and the processes to be used by its expert reviewers. In addition to the registration of values, RDAP extensions defined by the IETF and other IETF specifications MAY define additional value types (the "type" field), however these specifications MUST describe the specific JSON field to be used for each new value type. Section 10.2 defines the criteria for the values. Of these, criteria two states: | Values must be strings. They should be multiple words separated | by single space characters. Every character should be lowercased. | If possible, every word should be given in English and each | character should be US-ASCII. All registrations SHOULD meet these requirements, however there may be scenarios in which it is more appropriate for the values to follow other requirements such as values also used in other specifications or documents. In all cases, it should be understood that additional registrations of RDAP JSON values occurring after the specification of the value's type in the registry may not be recognized by clients and therefore either ignored or passed on to users without processing. Newton, et al. Expires 23 March 2025 [Page 19] Internet-Draft rdap-extensions September 2024 Designated experts MUST reject any registration that is a duplicate of an existing registration, and all registrations are to be considered case-insensitive. That is, any new registration that is a case variant of an existing registration should be rejected. RDAP clients SHOULD match values in this registry using case- insensitive matching. Definitions of new types (see above) MAY additionally constrain the format of values for those new types beyond the specification of this document and [RFC9083]. Designated experts MUST evaluate registrations with those criteria. The RDAP JSON Values Registry should have as a minimum three expert reviewers and ideally four or five. An expert reviewer assigned to the review of an RDAP JSON values registration must have another expert reviewer double check any submitted registration. Expert reviewers are to use the criteria defined in Section 10.2. 16. Security Considerations Section 3 describes the usage of query parameters and Section 12 describes the restrictions extensions must follow to use them. Section 4.3 instructs servers to ignore unknown query parameters. As it relates to issuing URLs for redirects, servers MUST NOT blindly copy query parameters from a request to a redirect URL as query parameters may contain sensitive information, such as security credentials or tracking information, not relevant to the target server of the URL. Following the advice in [RFC7480], servers SHOULD only place query parameters in redirect URLs when it is known by the origin server (the server issuing the redirect) that the target server (the server referenced by the redirect) can process the query parameter and the contents of the query parameter are appropriate to be received by the target. 17. Privacy Considerations Section 3 describes the usage of query parameters and Section 12 describes the restrictions extensions must follow to use them. As query parameters have been known to be used to subvert the privacy preferences of users in HTTP using protocols, server MUST NOT blindly copy query parameters from a request to a redirect URL as described in Section 16 and extensions MUST follow the constraints of query parameter usage as defined in Section 12. Newton, et al. Expires 23 March 2025 [Page 20] Internet-Draft rdap-extensions September 2024 18. Acknowledgments The following individuals have provided feedback and contributions to the content and direction of this document: James Gould, Daniel Keathley, and Ties de Kock. 19. References 19.1. Normative References [BCP14] Best Current Practice 14, . At the time of writing, this BCP comprises the following: Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, January 2005, . [RFC7480] Newton, A., Ellacott, B., and N. Kong, "HTTP Usage in the Registration Data Access Protocol (RDAP)", STD 95, RFC 7480, DOI 10.17487/RFC7480, March 2015, . [RFC9082] Hollenbeck, S. and A. Newton, "Registration Data Access Protocol (RDAP) Query Format", STD 95, RFC 9082, DOI 10.17487/RFC9082, June 2021, . [RFC9083] Hollenbeck, S. and A. Newton, "JSON Responses for the Registration Data Access Protocol (RDAP)", STD 95, RFC 9083, DOI 10.17487/RFC9083, June 2021, . 19.2. Informative References [I-D.gould-regext-rdap-versioning] Gould, J., Keathley, D., and M. Loffredo, "Versioning in the Registration Data Access Protocol (RDAP)", Work in Newton, et al. Expires 23 March 2025 [Page 21] Internet-Draft rdap-extensions September 2024 Progress, Internet-Draft, draft-gould-regext-rdap- versioning-02, 8 December 2023, . [I-D.ietf-regext-rdap-rir-search] Harrison, T. and J. Singh, "RDAP RIR Search", Work in Progress, Internet-Draft, draft-ietf-regext-rdap-rir- search-09, 24 March 2024, . [I-D.newton-regext-rdap-x-media-type] Newton, A. and J. Singh, "An RDAP With Extensions Media Type", Work in Progress, Internet-Draft, draft-newton- regext-rdap-x-media-type-01, 29 August 2023, . [RFC9224] Blanchet, M., "Finding the Authoritative Registration Data Access Protocol (RDAP) Service", STD 95, RFC 9224, DOI 10.17487/RFC9224, March 2022, . Authors' Addresses Andy Newton ICANN Email: andy@hxr.us Jasdip Singh ARIN Email: jasdips@arin.net Tom Harrison APNIC Email: tomh@apnic.net Newton, et al. Expires 23 March 2025 [Page 22]