A YANG Data Model and RADIUS Extension for Policy-based Network Access Control

Internet-Draft	A Policy-based Network Access Control	June 2024
Ma, et al.	Expires 27 December 2024	[Page]

Abstract

This document defines a YANG data model for policy-based network access control, which provides consistent and efficient enforcement of network access control policies based on group identity. Moreover, this document defines a mechanism to ease the maintenance of the mapping between a user group identifier and a set of IP/MAC addresses to enforce policy-based network access control.¶

In addition, the document defines a Remote Authentication Dial-in User Service (RADIUS) attribute that is used to communicate the user group identifier as part of identification and authorization information.¶

1. Introduction

With the increased adoption of remote access technologies (e.g., Virtual Private Networks (VPNs)) and Bring Your Own Device (BYOD) policies, enterprises adopted more flexibility related to how, where, and when employees work and collaborate. However, more flexibility comes with increased risks. Enabling office flexibility (e.g., mobility across many access locations) introduces a set of challenges for large-scale enterprises compared to conventional network access management approaches. Examples of such challenges are listed below:¶

Endpoints do not have stable IP addresses. For example, Wireless LAN (WLAN) and VPN clients, as well as back-end Virtual Machine (VM)-based servers, can move; their IP addresses could change as a result. This means that relying on IP/transport fields (e.g., the 5-tuple) is inadequate to ensure consistent and efficient security policy enforcement. IP address-based policies may not be flexible enough to accommodate endpoints with volatile IP addresses.¶
With the massive adoption of teleworking, there is a need to apply different security policies to the same set of users under different circumstances (e.g., prevent relaying attacks against a local attachment point to the enterprise network). For example, network access might be granted based upon criteria such as users' access location, source network reputation, users' role, time-of- day, type of network device used (e.g., corporate issued device versus personal device), device's security posture, etc. This means that the network needs to recognize the users' identity and their current context, and map the users to their correct access entitlement to the network.¶

This document defines a YANG data model (Section 6.1) for policy-based network access control, which extends the IETF Access Control Lists (ACLs) module defined in [RFC8519]. This module can be used to ensure consistent enforcement of ACL policies based on the group identity.¶

The ACL concept has been generalized to be device-nonspecific, and can be defined at network/administrative domain level [I-D.ietf-netmod-acl-extensions]. To allow for all applications of ACLs, the YANG module for policy-based network ACL defined in Section 6.1 does not limit how it can be used.¶

This document also defines a mechanism to establish a mapping between (1) the user group identifier (ID) and (2) common IP packet header fields and other encapsulating packet data (e.g., MAC address) to execute the policy-based access control.¶

Additionally, the document defines a Remote Authentication Dial-in User Service (RADIUS) [RFC2865] attribute that is used to communicate the user group identifier as part of identification and authorization information (Section 7).¶

Although the document cites MAC addresses as an example in some sections, the document does not make assumptions about which identifiers are used to trigger ACLs. These examples should not be considered as recommendations. Readers should be aware that MAC-based ACLs can be bypassed by flushing out the MAC address. Other implications related to the change of MAC addresses are discussed in [I-D.ietf-madinas-use-cases].¶

The document does not specify how to map the policy group identifiers to dedicated fields (e.g., Group Based Policy (GBP) discussed in Section 6.2.3 of [I-D.ietf-nvo3-encap]).¶

The YANG data model in this document conforms to the Network Management Datastore Architecture (NMDA) defined in [RFC8342].¶

1.1. Editorial Note (To be removed by RFC Editor)

Note to the RFC Editor: This section is to be removed prior to publication.¶

This document contains placeholder values that need to be replaced with finalized values at the time of publication. This note summarizes all of the substitutions that are needed. No other RFC Editor instructions are specified elsewhere in this document.¶

Please apply the following replacements:¶

XXXX --> the assigned RFC number for this document¶
SSSS --> the assigned RFC number for [I-D.ietf-netmod-schedule-yang]¶
2023-01-19 --> the actual date of the publication of this document¶

4. Policy-based Network Access Control

4.1. Overview

The architecture of a system that provides real-time and consistent enforcement of access control policies is shown in Figure 1. This architecture includes the following functional entities and interfaces:¶

A service orchestrator which coordinates the overall service, including security policies. The service may be connectivity or any other access to resources that can be hosted and offered by a network.¶
A software-defined networking (SDN) [RFC7149] [RFC7426] controller which is responsible for maintaining endpoint-group based ACLs and mapping the endpoint-group to the associated attributes information (e.g., IP/MAC address). An SDN controller also behaves as a Policy Decision Point (PDP) [RFC3198] and pushes the required access control policies to relevant Policy Enforcement Points (PEPs) [RFC3198]. A PDP is also known as "policy server" [RFC2753].¶

An SDN controller may interact with an Authentication, Authorization and Accounting (AAA) [RFC3539] server or a Network Access Server (NAS) [RFC7542].¶
A Network Access Server (NAS) entity which handles authentication requests. The NAS interacts with an AAA server to complete user authentication using protocols like RADIUS [RFC2865]. When access is granted, the AAA server provides the group identifier (group ID) to which the user belongs when the user first logs onto the network. A new RADIUS attribute is defined in Section 7 for this purpose.¶
The AAA server provides a collection of authentication, authorization, and accounting functions. The AAA server is responsible for centralized user information management. The AAA server is preconfigured with user credentials (e.g., user name and password), possible group identities and related user attributes (users may be divided into different groups based on different user attributes).¶
The Policy Enforcement Point (PEP) is the central entity which is responsible for enforcing appropriate access control policies. A first deployment scenario assumes that the SDN controller maps the group ID to the related common packet header and delivers IP/MAC address based ACL policies to the required PEPs. Another deployment scenario may require that PEPs map incoming packets to their associated source and/or destination endpoint-group IDs, and acts upon the endpoint-group ID based ACL policies (e.g., a group identifier may be carried in packet headers such as discussed in Section 6.2.3 of [I-D.ietf-nvo3-encap]). More details are provided in Section 9.¶

Multiple PEPs may be involved in a network.¶

A PEP exposes a NETCONF interface [RFC6241] to an SDN controller.¶

Figure 1 provides the overall architecture and procedure for policy-based access control management.¶

                                         .------------.
                                         |Orchestrator|
                                         '------+-----'
       Service                                  | (Step 1)
      --------------------------------------------------------
                                                |
       Network                                  |
                                 (Step 4)       |
       .-------.        .--------.     .--------+-----------.
       |User #1+--+     | AAA    |     |    SDN Controller  |
       '-------'  |     | Server +-----+        (PDP)       |
                  |     '----+---'     '--------+-----------'
                  |          |                  |
                  |          |           +------+--------+(Step 5)
        (Step 2)  |          |(Step 3)   |               |
                  |          |           |               |
                  |        .-+-----------+---------------+------------.
                  |        | .----------------------. .--------------.|
       .-------.  +--------+ | Network Access Server| |firewall, etc.||
       |User #2+-----------+ |       (NAS)          | '--------------'|
       '-------'           | '----------------------'                 |
                           |                     (PEP)                |
                           '------------------------------------------'

Figure 1: An Architecture for Group-based Policy Management

In reference to Figure 1, the following typical flow is experienced:¶

Step 1:: Administrators (or a service orchestrator) configure an SDN controller with network-level ACLs using the YANG module defined in Section 6.1. An example is provided in Appendix A.1.¶
Step 2:: When a user first logs onto the network, he/she is required to be authenticated (e.g., using user name and password) at the NAS.¶
Step 3:: The authentication request is then relayed to the AAA server using a protocol such as RADIUS [RFC2865]. It is assumed that the AAA server has been appropriately configured to store user credentials, e.g., user name, password, group information, and other user attributes. This document does not restrict what authentication method is used. Administrators may refer to, e.g., Section 7.4 of [I-D.ietf-radext-deprecating-radius] for authentication method recommendations. If the authentication request succeeds, the user is placed in a user group the identity of which is returned to the network access server as the authentication result (see Section 7). If the authentication fails, the user is not assigned any user group, which also means that the user has no access; or the user is assigned a special group with very limited access permissions for the network (as a function of the local policy). ACLs are enforced so that flows from that IP address are discarded (or rate-limited) by the network. In some implementations, AAA server can be integrated with an SDN controller.¶
Step 4:: Either the AAA server or the NAS notifies an SDN controller of the mapping between the user group ID and related common packet header attributes (e.g., IP/MAC address).¶
Step 5:: Either group or IP/MAC address based access control policies are maintained on relevant PEPs under the SDN controller's management. Whether the PEP enforces the group or IP/MAC address based ACL is implementation specific. Both types of ACL policy may exist on the PEP. Appendix A.2 and Appendix A.3 elaborate on each case.¶

4.2. Endpoint Group

4.2.1. User Group

The user group is determined by a set of predefined policy criteria (e.g., source IP address, geolocation data, time of day, or device certificate). It uses an identifier (user group ID) to represent the collective identity of a group of users. Users may be moved to different user-groups if their composite attributes, environment, and/or local enterprise policy change.¶

A user is authenticated, and classified at the AAA server, and assigned to a user group. A user's group membership may change as aspects of the user change. For example, if the user group membership is determined solely by the source IP address, then a given user's group ID will change when the user moves to a new IP address that falls outside of the range of addresses of the previous user group.¶

This document does not make any assumption about how user groups are defined. Such considerations are deployment specific and are out of scope. However, and for illustration purposes, Table 1 shows an example of how user group definitions may be characterized. User groups may share several common criteria. That is, user group criteria are not mutually exclusive. For example, the policy criteria of user groups R&D Regular and R&D BYOD may share the same set of users that belong to the R&D organization, and differ only in the type of clients (firm-issued clients vs. users' personal clients). Likewise, the same user may be assigned to different user groups depending on the time of day or the type of day (e.g., weekdays versus weekends), etc.¶

Table 1: User Group Example
Group Name	Group ID	Group Description
R&D	foo-10	R&D employees
R&D BYOD	foo-11	Personal devices of R&D employees
Sales	foo-20	Sales employees
VIP	foo-30	VIP employees

4.2.2. Device Group

The device-group ID is an identifier that represents the collective identity of a group of enterprise end devices. An enterprise device could be a server that hosts applications or software that deliver services to enterprise users. It could also be an enterprise IoT device that serve a limited purpose, e.g., a printer that allows users to scan, print and send emails. Table 2 shows an example of how device-group definitions may be characterized.¶

Table 2: Device-Group Example
Group Name	Group ID	Group Description
Workflow	bar-40	Workflow resource servers
R&D Resource	bar-50	R&D resource servers
Printer Resource	bar-60	Printer resources

Users accessing an enterprise device should be strictly controlled. Matching abstract device group ID instead of specified addresses in ACL polices helps shield the consequences of address change (e.g., back-end VM-based server migration).¶

4.2.3. Application Group

An application group is a collection of applications that share a common access control policies. A device may run multiple applications, and different policies might need to be applied to the applications and device. A single application may need to run on multiple devices/VMs/containers, the abstraction of application group eases the process of application migration. For example, the policy does not depend on the transport coordinates (i.e., 5-tuple). Table 3 shows an example of how application-group definitions may be characterized.¶

Table 3: Application-Group Example
Group Name	Group ID	Group Description
Audio/Video Streaming	baz-70	Audio/Video conferecing application
Instant messaging	baz-80	Messaging application
document collaboration	baz-90	Real-time document editing application

5. Modules Overview

5.1. The UCL Extension to the ACL Model

This module specifies an extension to the "ietf-access-control-list" module [RFC8519]. This extension adds endpoint groups so that an endpoint group identifier can be matched upon, and also enable access control policy activation based on date and time conditions.¶

Figure 2 provides the tree structure of the "ietf-ucl-acl" module.¶

module: ietf-ucl-acl

  augment /acl:acls:
    +--rw endpoint-groups {uacl:group}?
       +--rw endpoint-group* [group-id]
          +--rw group-id      string
          +--rw group-type?   identityref
  augment /acl:acls/acl:acl/acl:aces/acl:ace/acl:matches:
    +--rw endpoint-group {uacl:match-on-group}?
       +--rw source-group-id?        group-id-reference
       +--rw destination-group-id?   group-id-reference
  augment /acl:acls/acl:acl/acl:aces/acl:ace:
    +--rw effective-schedule {uacl:schedule}?
       +--rw (schedule-type)?
          +--:(period)
          |  +--rw period-description?       string
          |  +--rw period-start              yang:date-and-time
          |  +--rw time-zone-identifier?     sys:timezone-name
          |  +--rw (period-type)?
          |     +--:(explicit)
          |     |  +--rw period-end?         yang:date-and-time
          |     +--:(duration)
          |        +--rw duration?           duration
          +--:(recurrence) {schedule:icalendar-recurrence-supported}?
             +--rw recurrence-first
             |  +--rw date-time-start?        yang:date-and-time
             |  +--rw duration?               duration
             |  +--rw time-zone-identifier?   sys:timezone-name
             +--rw (recurrence-bound)?
             |  +--:(until)
             |  |  +--rw until?              yang:date-and-time
             |  +--:(count)
             |     +--rw count?              uint32
             +--rw recurrence-description?   string
             +--rw frequency                 identityref
             +--rw interval?                 uint32
             +--rw period* [period-start]
             |  +--rw period-description?     string
             |  +--rw period-start            yang:date-and-time
             |  +--rw time-zone-identifier?   sys:timezone-name
             |  +--rw (period-type)?
             |     +--:(explicit)
             |     |  +--rw period-end?       yang:date-and-time
             |     +--:(duration)
             |        +--rw duration?         duration
             +--rw bysecond*                 uint32
             +--rw byminute*                 uint32
             +--rw byhour*                   uint32
             +--rw byday* [weekday]
             |  +--rw direction*   int32
             |  +--rw weekday      schedule:weekday
             +--rw bymonthday*               int32
             +--rw byyearday*                int32
             +--rw byyearweek*               int32
             +--rw byyearmonth*              uint32
             +--rw bysetpos*                 int32
             +--rw workweek-start?           schedule:weekday
             +--rw exception-dates*          yang:date-and-time

Figure 2: UCL Extension

The first part of the data model augments the "acl" list in the "ietf-access-control-list" model [RFC8519] with a "endpoint-groups" container having a list of "endpoint group" inside, each entry has a "group-id" that uniquely identifies the endpoint group and a "group-type" parameter to specify the endpoint group type.¶

"group-id" is defined as a string rather than uint to accommodate deployments which require some identification hierarchy within a domain. Such a hierarchy is meant to ease coordination within an administrative domain. There might be cases where a domain needs to tag packets with the group they belong to. The tagging does not need to mirror exactly the "group id" used to populate the policy. How the "group-id" string is mapped to the tagging or field in the packet header in encapsulation scenario is outside the scope of this document. Augmentation may be considered in the future to cover encapsulation considerations.¶

The second part of the data model augments the "matches" container in the IETF ACL model [RFC8519] so that a source and/or destination endpoint group index can be referenced as the match criteria.¶

The third part of the data model augments the "ace" list in the "ietf-access-control-list" model [RFC8519] with date and time specific parameters to allow ACE to be activated based on a date/time condition. Two types of time range are defined, which reuse "recurrence" and "period" groupings defined in the "ietf-schedule" YANG module in [I-D.ietf-netmod-schedule-yang], respectively. Note that the data model augments the definition of "recurrence" grouping with a "duration" data node to specify the duration of time for each occurrence the policy activation is triggered.¶

6. YANG Modules

6.1. The "ietf-ucl-acl" YANG Module

This module imports types and groupings defined in the "ietf-schedule" module [I-D.ietf-netmod-schedule-yang]. It also augments the "ietf-access-control-list" module [RFC8519].¶

<CODE BEGINS> file "ietf-ucl-acl@2023-01-19.yang"

module ietf-ucl-acl {
  yang-version 1.1;
  namespace "urn:ietf:params:xml:ns:yang:ietf-ucl-acl";
  prefix uacl;

  import ietf-access-control-list {
    prefix acl;
    reference
      "RFC 8519: YANG Data Model for Network Access
                 Control Lists (ACLs)";
  }
  import ietf-schedule {
    prefix schedule;
    reference
      "RFC SSSS: A Common YANG Data Model for Scheduling";
  }

  organization
    "IETF OPSWG Working Group";
  contact
    "WG Web: <https://datatracker.ietf.org/wg/opsawg/>
     WG List: <mailto:opsawg@ietf.org>

     Editor:   Qiufang Ma
               <mailto:maqiufang1@huawei.com
     Author:   Qin Wu
               <mailto:bill.wu@huawei.com>
     Editor:   Mohamed Boucadair
               <mailto:mohamed.boucadair@orange.com>
     Author:   Daniel King
               <mailto:d.king@lancaster.ac.uk>";
  description
    "This YANG module augments the IETF access control lists (ACLs)
     module and is meant to ensure consistent enforcement of ACL
     policies based on the group identity.

     Copyright (c) 2024 IETF Trust and the persons identified
     as authors of the code. All rights reserved.

     Redistribution and use in source and binary forms, with
     or without modification, is permitted pursuant to, and
     subject to the license terms contained in, the Revised
     BSD License set forth in Section 4.c of the IETF Trust's
     Legal Provisions Relating to IETF Documents
     (https://trustee.ietf.org/license-info).

     This version of this YANG module is part of RFC XXXX
     (https://www.rfc-editor.org/info/rfcXXXX); see the RFC
     itself for full legal notices.";

  revision 2023-01-19 {
    description
      "Initial revision.";
    reference
      "RFC XXXX: A YANG Data Model and RADIUS Extension for
                 Policy-based Network Access Control";
  }

  feature schedule {
    description
      "Indicates support of schedule-based ACEs.";
  }

  feature match-on-group {
    description
      "Indicates support of matching on endpoint groups.";
  }

  feature group {
    if-feature "uacl:match-on-group";
    description
      "Indicates support of group-based ACLs.";
  }

  feature mixed-ipv4-group {
    if-feature "acl:match-on-ipv4 and uacl:match-on-group";
    description
      "IPv4 and group ACL combinations supported.";
  }

  feature mixed-ipv6-group {
    if-feature "acl:match-on-ipv6 and uacl:match-on-group";
    description
      "IPv6 and group ACL combinations supported.";
  }

  feature mixed-ipv4-ipv6-group {
    if-feature "acl:match-on-ipv4 and acl:match-on-ipv6 and "
             + "uacl:match-on-group";
    description
      "IPv4, IPv6, and group ACL combinations supported.";
  }

  feature mixed-eth-group {
    if-feature "acl:match-on-eth and uacl:match-on-group";
    description
      "Eth and group ACL combinations supported.";
  }

  feature mixed-eth-ipv4-group {
    if-feature "acl:match-on-eth and acl:match-on-ipv4 and "
             + "uacl:match-on-group";
    description
      "Eth, IPv4, and group ACL combinations supported.";
  }

  feature mixed-eth-ipv6-group {
    if-feature "acl:match-on-eth and acl:match-on-ipv6 and "
             + "uacl:match-on-group";
    description
      "Eth, IPv6, and group ACL combinations supported.";
  }

  feature mixed-eth-ipv4-ipv6-group {
    if-feature "acl:match-on-eth and acl:match-on-ipv4 and "
             + "acl:match-on-ipv6 and uacl:match-on-group";
    description
      "Eth, IPv4, IPv6, and group ACL combinations supported.";
  }

  identity group-acl-type {
    if-feature "group";
    base acl:acl-base;
    description
      "An Access Control List (ACL) that matches based on an endpoint
       group identity, which can represent the collective identity of
       a group of authenticated users, end devices, or applications.
       An endpoint group identity may be carried in the outer/inner
       packet header (e.g., via NVO3 encapsulation), may also not
       correspond to any field in the packet header. Matching on
       Layer 4 header fields may also exist in the Access Control
       Entries (ACEs).";
  }

  identity mixed-ipv4-group-type {
    if-feature "mixed-ipv4-group";
    base acl:ipv4-acl-type;
    base uacl:group-acl-type;
    description
      "An ACL that contains a mix of entries that match on fields
       in the IPv4 header and endpoint group identities, which can
       represent the collective identity of a group of authenticated
       users, end devices, or applications. Matching on Layer 4
       header fields may also exist in the ACEs.";
  }

  identity mixed-ipv6-group-type {
    if-feature "mixed-ipv6-group";
    base acl:ipv6-acl-type;
    base uacl:group-acl-type;
    description
      "An ACL that contains a mix of entries that match on fields
       in the IPv6 header and endpoint group identities, which can
       represent the collective identity of a group of authenticated
       users, end devices, or applications. Matching on Layer 4
       header fields may also exist in the ACEs.";
  }

  identity mixed-ipv4-ipv6-group-type {
    if-feature "mixed-ipv4-ipv6-group";
    base acl:ipv4-acl-type;
    base acl:ipv6-acl-type;
    base uacl:group-acl-type;
    description
      "An ACL that contains a mix of entries that match on fields
       in the IPv4 header, IPv6 header, and endpoint group identities,
       which can represent the collective identity of a group of
       authenticated users, end devices, or applications. Matching
       on Layer 4 header fields may also exist in the ACEs.";
  }

  identity mixed-eth-group-type {
    if-feature "mixed-eth-group";
    base acl:eth-acl-type;
    base uacl:group-acl-type;
    description
      "An ACL that contains a mix of entries that match on fields
       in the Ethernet header and endpoint group identities,
       which can represent the collective identity of a group of
       authenticated users, end devices, or applications. Matching
       on Layer 4 header fields may also exist in the ACEs.";
  }

  identity mixed-eth-ipv4-group-type {
    if-feature "mixed-eth-ipv4-group";
    base acl:eth-acl-type;
    base acl:ipv4-acl-type;
    base uacl:group-acl-type;
    description
      "An ACL that contains a mix of entries that match on fields
       in the Ethernet header, IPv4 header, and endpoint group
       identities, which can represent the collective identity of a
       group of authenticated users, end devices or applications.
       Matching on Layer 4 header fields may also exist in the
       ACEs.";
  }

  identity mixed-eth-ipv6-group-type {
    if-feature "mixed-eth-ipv6-group";
    base acl:eth-acl-type;
    base acl:ipv6-acl-type;
    base uacl:group-acl-type;
    description
      "An ACL that contains a mix of entries that match on fields
       in the Ethernet header, IPv6 header, and endpoint group
       identities, which can represent the collective identity of
       a group of authenticated users, end devices or applications.
       Matching on Layer 4 header fields may also exist in the
       ACEs.";
  }

  identity mixed-eth-ipv4-ipv6-group-type {
    if-feature "mixed-eth-ipv4-ipv6-group";
    base acl:eth-acl-type;
    base acl:ipv4-acl-type;
    base acl:ipv6-acl-type;
    base uacl:group-acl-type;
    description
      "An ACL that contains a mix of entries that match on fields
       in the Ethernet header, IPv4 header, IPv6 header, and endpoint
       group identities, which can represent the collective identity
       of a group of authenticated users, end devices or
       applications. Matching on Layer 4 header fields may also exist
       in the ACEs.";
  }

  identity endpoint-group-type {
    description
      "Identity for the type of endpoint group.";
  }

  identity user-group {
    base uacl:endpoint-group-type;
    description
      "Identity for the user endpoint group.";
  }

  identity device-group {
    base uacl:endpoint-group-type;
    description
      "Identity for the device endpoint group.";
  }

  identity application-group {
    base uacl:endpoint-group-type;
    description
      "Identity for the application endpoint group.";
  }

  typedef group-id-reference {
    type leafref {
      path "/acl:acls/uacl:endpoint-groups"
         + "/uacl:endpoint-group/uacl:group-id";
    }
    description
      "Defines a reference to a group identifier.";
  }

  augment "/acl:acls" {
    if-feature "uacl:group";
    description
      "Adds a container for endpoint group definition.";
    container endpoint-groups {
      description
        "Defines a container for the endpoint group list.";
      list endpoint-group {
        key "group-id";
        description
          "Definition of the endpoint group list.";
        leaf group-id {
          type string {
            length "1..64";
          }
          description
            "The endpoint group identifier that uniquely identifies
             an endpoint group.";
        }
        leaf group-type {
          type identityref {
            base endpoint-group-type;
          }
          description
            "Specifies the endpoint group type.";
        }
      }
    }
  }

  augment "/acl:acls/acl:acl/acl:aces/acl:ace/acl:matches" {
    if-feature "uacl:match-on-group";
    description
      "Specifies how a source and/or destination endpoint group
       index can be referenced as the match criteria in the ACEs.";
    container endpoint-group {
      when "derived-from-or-self(/acl:acls/acl:acl/acl:type, "
         + "'uacl:group-acl-type')";
      description
        "Adds new match types.";
      leaf source-group-id {
        type group-id-reference;
        description
          "The matched source endpoint group ID.";
      }
      leaf destination-group-id {
        type group-id-reference;
        description
          "The matched destination endpoint group ID.";
      }
    }
  }

  augment "/acl:acls/acl:acl/acl:aces/acl:ace" {
    if-feature "uacl:schedule";
    description
      "Adds schedule parameters to allow the ACE to take effect
       based on date and time.";
    container effective-schedule {
      description
        "Defines when the access control entry rules
         are in effect based on date and time condition.

         If it is not configured, the access control entry
         is immediately and always in effect.";
      choice schedule-type {
        description
          "Choice based on the type of the time range.";
        case period {
          description
            "The ACE takes effect based on a precise period of
             time.";
            uses schedule:period-of-time;
        }
        case recurrence {
          if-feature "schedule:icalendar-recurrence-supported";
          description
            "The ACE takes effect based on a recurrence rule.";
          uses schedule:icalendar-recurrence;
        }
      }
    }
  }
}


<CODE ENDS>

7. User Access Control Group ID RADIUS Attribute

The User-Access-Group-ID RADIUS attribute is defined with a globally unique name. The definition of the attribute follows the guidelines in Section 2.7.1 of [RFC6929]. This attribute is used to indicate the user group ID to be used by the NAS. When the User-Access-Group-ID RADIUS attribute is present in the RADIUS Access-Accept, the system applies the related access control to the users after it authenticates.¶

The User-Access-Group-ID Attribute is of type "string" as defined in Section 3.5 of [RFC8044].¶

The User-Access-Group-ID Attribute MAY appear in a RADIUS Access-Accept packet. It MAY also appear in a RADIUS Access-Request packet as a hint to the RADIUS server to indicate a preference. However, the server is not required to honor such a preference. If more than one instance of the User-Access-Group-ID Attribute appears in a RADIUS Access-Accept packet, this means that the user is a member of many groups.¶

The User-Access-Group-ID Attribute MAY appear in a RADIUS CoA-Request packet.¶

The User-Access-Group-ID Attribute MAY appear in a RADIUS Accounting-Request packet. Specifically, this may be used by a NAS to acknowledge that the attribute was received in the RADIUS Access-Request and the NAS is enforcing that policy.¶

The User-Access-Group-ID Attribute MUST NOT appear in any other RADIUS packet.¶

The User-Access-Group-ID Attribute is structured as follows:¶

Type: TBA1¶
Length: This field indicates the total length, in octets, of all fields of this attribute, including the Type, Length, Extended-Type, and the "Value".¶
: The Length MUST be at most 67 octets.¶
Data Type: string (Section 3.5 of [RFC8044])¶
Value: This field contains the user group ID.¶

Table 4: Table of Attributes
Access-Request	Access-Accept	Access-Reject	Challenge	Attribute
0+	0+	0	0	User-Access-Group-ID
Accounting-Request	CoA-Request	CoA-ACK	CoA-NACK	Attribute
0+	0+	0	0	User-Access-Group-ID

10. Security Considerations

10.1. YANG

This section uses the template described in Section 3.7 of [I-D.ietf-netmod-rfc8407bis].¶

The YANG modules specified in this document defines schema for data that is designed to be accessed via network management protocols such as NETCONF [RFC6241] or RESTCONF [RFC8040]. The lowest NETCONF layer is the secure transport layer, and the mandatory-to-implement secure transport is Secure Shell (SSH) [RFC6242]. The lowest RESTCONF layer is HTTPS, and the mandatory-to-implement secure transport is TLS [RFC8446].¶

The Network Configuration Access Control Model (NACM) [RFC8341] provides the means to restrict access for particular NETCONF or RESTCONF users to a preconfigured subset of all available NETCONF or RESTCONF protocol operations and content.¶

There are a number of data nodes defined in the "ietf-ucl-acl" YANG module that are writable, creatable, and deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) and delete operations to these data nodes without proper protection or authentication can have a negative effect on network operations. Specifically, the following subtrees and data nodes have particular sensitivities/vulnerabilities:¶

/acl:acls/uacl:endpoint-groups/uacl:endpoint-group:

This list specifies all the endpoint group entries. Unauthorized write access to this list can allow intruders to modify the entries so as to forge an endpoint group that does not exist or maliciously delete an existing endpoint group, which could be used to craft an attack.¶
/acl:acls/acl:acl/acl:aces/acl:ace/acl:matches/uacl:endpoint-group:

This subtree specifies a source and/or endpoint group index as match criteria in the ACEs. Unauthorized write access to this data node may allow intruders to modify the group identity so as to permit access that should not be permitted, or deny access that should be permitted.¶

Some of the readable data nodes in the "ietf-ucl-acl" YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get-config, or notification) to these data nodes. Specifically, the following subtrees and data nodes have particular sensitivities/vulnerabilities:¶

/acl:acls/acl:acl/acl:aces/acl:ace/uacl:time-range:

This subtree specifies when the access control entry rules are in effect. An unauthorized read access of the list will allow the attacker to determine which rules are in effect, to better craft an attack.¶

10.2. RADIUS

RADIUS-related security considerations are discussed in [RFC2865].¶

This document targets deployments where a trusted relationship is in place between the RADIUS client and server with communication optionally secured by IPsec or Transport Layer Security (TLS) [RFC6614].¶

Table 5: RADIUS Attribute
Value	Description	Data Type	Reference
TBA1	User-Access-Group-ID	string	This-Document

12. References

12.1. Normative References

[I-D.ietf-netmod-schedule-yang]: Ma, Q., Wu, Q., Boucadair, M., and D. King, "A Common YANG Data Model for Scheduling", Work in Progress, Internet-Draft, draft-ietf-netmod-schedule-yang-02, 25 June 2024, <https://datatracker.ietf.org/doc/html/draft-ietf-netmod-schedule-yang-02>.
[RFC2119]: Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <https://www.rfc-editor.org/rfc/rfc2119>.
[RFC2865]: Rigney, C., Willens, S., Rubens, A., and W. Simpson, "Remote Authentication Dial In User Service (RADIUS)", RFC 2865, DOI 10.17487/RFC2865, June 2000, <https://www.rfc-editor.org/rfc/rfc2865>.
[RFC3688]: Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, DOI 10.17487/RFC3688, January 2004, <https://www.rfc-editor.org/rfc/rfc3688>.
[RFC6020]: Bjorklund, M., Ed., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", RFC 6020, DOI 10.17487/RFC6020, October 2010, <https://www.rfc-editor.org/rfc/rfc6020>.
[RFC6241]: Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed., and A. Bierman, Ed., "Network Configuration Protocol (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011, <https://www.rfc-editor.org/rfc/rfc6241>.
[RFC6242]: Wasserman, M., "Using the NETCONF Protocol over Secure Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011, <https://www.rfc-editor.org/rfc/rfc6242>.
[RFC6929]: DeKok, A. and A. Lior, "Remote Authentication Dial In User Service (RADIUS) Protocol Extensions", RFC 6929, DOI 10.17487/RFC6929, April 2013, <https://www.rfc-editor.org/rfc/rfc6929>.
[RFC8040]: Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017, <https://www.rfc-editor.org/rfc/rfc8040>.
[RFC8044]: DeKok, A., "Data Types in RADIUS", RFC 8044, DOI 10.17487/RFC8044, January 2017, <https://www.rfc-editor.org/rfc/rfc8044>.
[RFC8174]: Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, <https://www.rfc-editor.org/rfc/rfc8174>.
[RFC8341]: Bierman, A. and M. Bjorklund, "Network Configuration Access Control Model", STD 91, RFC 8341, DOI 10.17487/RFC8341, March 2018, <https://www.rfc-editor.org/rfc/rfc8341>.
[RFC8342]: Bjorklund, M., Schoenwaelder, J., Shafer, P., Watsen, K., and R. Wilton, "Network Management Datastore Architecture (NMDA)", RFC 8342, DOI 10.17487/RFC8342, March 2018, <https://www.rfc-editor.org/rfc/rfc8342>.
[RFC8446]: Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018, <https://www.rfc-editor.org/rfc/rfc8446>.
[RFC8519]: Jethanandani, M., Agarwal, S., Huang, L., and D. Blair, "YANG Data Model for Network Access Control Lists (ACLs)", RFC 8519, DOI 10.17487/RFC8519, March 2019, <https://www.rfc-editor.org/rfc/rfc8519>.

12.2. Informative References

[I-D.ietf-madinas-use-cases]: Henry, J. and Y. Lee, "Randomized and Changing MAC Address Use Cases", Work in Progress, Internet-Draft, draft-ietf-madinas-use-cases-10, 23 June 2024, <https://datatracker.ietf.org/doc/html/draft-ietf-madinas-use-cases-10>.
[I-D.ietf-netmod-acl-extensions]: de Dios, O. G., Barguil, S., Boucadair, M., and Q. Wu, "Extensions to the Access Control Lists (ACLs) YANG Model", Work in Progress, Internet-Draft, draft-ietf-netmod-acl-extensions-10, 29 May 2024, <https://datatracker.ietf.org/doc/html/draft-ietf-netmod-acl-extensions-10>.
[I-D.ietf-netmod-rfc8407bis]: Bierman, A., Boucadair, M., and Q. Wu, "Guidelines for Authors and Reviewers of Documents Containing YANG Data Models", Work in Progress, Internet-Draft, draft-ietf-netmod-rfc8407bis-12, 21 June 2024, <https://datatracker.ietf.org/doc/html/draft-ietf-netmod-rfc8407bis-12>.
[I-D.ietf-nvo3-encap]: Boutros, S. and D. E. Eastlake, "Network Virtualization Overlays (NVO3) Encapsulation Considerations", Work in Progress, Internet-Draft, draft-ietf-nvo3-encap-12, 19 February 2024, <https://datatracker.ietf.org/doc/html/draft-ietf-nvo3-encap-12>.
[I-D.ietf-radext-deprecating-radius]: DeKok, A., "Deprecating Insecure Practices in RADIUS", Work in Progress, Internet-Draft, draft-ietf-radext-deprecating-radius-01, 29 April 2024, <https://datatracker.ietf.org/doc/html/draft-ietf-radext-deprecating-radius-01>.
[I-D.smith-vxlan-group-policy]: Smith, M. and L. Kreeger, "VXLAN Group Policy Option", Work in Progress, Internet-Draft, draft-smith-vxlan-group-policy-05, 22 October 2018, <https://datatracker.ietf.org/doc/html/draft-smith-vxlan-group-policy-05>.
[I-D.yizhou-anima-ip-to-access-control-groups]: Li, Y., Shen, L., and Y. Zhou, "Autonomic IP Address To Access Control Group ID Mapping", Work in Progress, Internet-Draft, draft-yizhou-anima-ip-to-access-control-groups-02, 15 November 2021, <https://datatracker.ietf.org/doc/html/draft-yizhou-anima-ip-to-access-control-groups-02>.
[I-D.you-i2nsf-user-group-based-policy]: You, J., Zarny, M., Jacquenet, C., Boucadair, M., Li, Y., Strassner, J., and S. Majee, "User-group-based Security Policy for Service Layer", Work in Progress, Internet-Draft, draft-you-i2nsf-user-group-based-policy-02, 8 July 2016, <https://datatracker.ietf.org/doc/html/draft-you-i2nsf-user-group-based-policy-02>.
[RADIUS-Types]: IANA, "RADIUS Types", <http://www.iana.org/assignments/radius-types>.
[RFC2475]: Blake, S., Black, D., Carlson, M., Davies, E., Wang, Z., and W. Weiss, "An Architecture for Differentiated Services", RFC 2475, DOI 10.17487/RFC2475, December 1998, <https://www.rfc-editor.org/rfc/rfc2475>.
[RFC2753]: Yavatkar, R., Pendarakis, D., and R. Guerin, "A Framework for Policy-based Admission Control", RFC 2753, DOI 10.17487/RFC2753, January 2000, <https://www.rfc-editor.org/rfc/rfc2753>.
[RFC3198]: Westerinen, A., Schnizlein, J., Strassner, J., Scherling, M., Quinn, B., Herzog, S., Huynh, A., Carlson, M., Perry, J., and S. Waldbusser, "Terminology for Policy-Based Management", RFC 3198, DOI 10.17487/RFC3198, November 2001, <https://www.rfc-editor.org/rfc/rfc3198>.
[RFC3539]: Aboba, B. and J. Wood, "Authentication, Authorization and Accounting (AAA) Transport Profile", RFC 3539, DOI 10.17487/RFC3539, June 2003, <https://www.rfc-editor.org/rfc/rfc3539>.
[RFC6614]: Winter, S., McCauley, M., Venaas, S., and K. Wierenga, "Transport Layer Security (TLS) Encryption for RADIUS", RFC 6614, DOI 10.17487/RFC6614, May 2012, <https://www.rfc-editor.org/rfc/rfc6614>.
[RFC7149]: Boucadair, M. and C. Jacquenet, "Software-Defined Networking: A Perspective from within a Service Provider Environment", RFC 7149, DOI 10.17487/RFC7149, March 2014, <https://www.rfc-editor.org/rfc/rfc7149>.
[RFC7426]: Haleplidis, E., Ed., Pentikousis, K., Ed., Denazis, S., Hadi Salim, J., Meyer, D., and O. Koufopavlou, "Software-Defined Networking (SDN): Layers and Architecture Terminology", RFC 7426, DOI 10.17487/RFC7426, January 2015, <https://www.rfc-editor.org/rfc/rfc7426>.
[RFC7542]: DeKok, A., "The Network Access Identifier", RFC 7542, DOI 10.17487/RFC7542, May 2015, <https://www.rfc-editor.org/rfc/rfc7542>.
[RFC8340]: Bjorklund, M. and L. Berger, Ed., "YANG Tree Diagrams", BCP 215, RFC 8340, DOI 10.17487/RFC8340, March 2018, <https://www.rfc-editor.org/rfc/rfc8340>.

Appendix A. Examples Usage

A.1. Configuring the Controller Using Group based ACL

Let's consider an organization that would like to restrict the access of R&D employees that bring personally owned devices (BYOD) into the workplace.¶

The access requirements are as follows:¶

Permit traffic from R&D BYOD of employees, destined to R&D employees' devices every work day from 8:00:00 to 18:00:00 UTC, starting in January 1st, 2025.¶
Deny traffic from R&D BYOD of employees, destined to finance servers located in the enterprise DC network starting at 8:30:00 of January 20, 2025 with an offset of -08:00 from UTC (Pacific Standard Time) and ending at 18:00:00 in Pacific Standard Time on December 31, 2025.¶

The example shown in Figure 3 illustrates the configuration of an SDN controller using the group-based ACL:¶

=============== NOTE: '\' line wrapping per RFC 8792 ================

<?xml version="1.0" encoding="utf-8"?>

<acls xmlns="urn:ietf:params:xml:ns:yang:ietf-access-control-list"
      xmlns:uacl="urn:ietf:params:xml:ns:yang:ietf-ucl-acl">
    <endpoint-groups
      xmlns="urn:ietf:params:xml:ns:yang:ietf-ucl-acl">
      <endpoint-group>
        <group-id>R&amp;D</group-id>
        <group-type>user-group</group-type>
      </endpoint-group>
      <endpoint-group>
        <group-id>R&amp;D BYOD</group-id>
        <group-type>user-group</group-type>
      </endpoint-group>
      <endpoint-group>
        <group-id>finance server</group-id>
        <group-type>device-group</group-type>
      </endpoint-group>
    </endpoint-groups>
    <acl>
    <name>sample-group-acl</name>
    <type>uacl:group-acl-type</type>
    <aces>
      <ace>
        <name>rule1</name>
        <matches>
          <endpoint-group
            xmlns="urn:ietf:params:xml:ns:yang:ietf-ucl-acl">
            <source-group-id>R&amp;D BYOD</source-group-id>
            <destination-group-id>R&amp;D</destination-group-id>
          </endpoint-group>
        </matches>
        <actions>
          <forwarding>accept</forwarding>
        </actions>
        <effective-schedule xmlns="urn:ietf:params:xml:ns:yang:ietf-\
                                                             ucl-acl"
          xmlns:schedule="urn:ietf:params:xml:ns:yang:ietf-schedule">
          <recurrence-first>
            <date-time-start>2025-01-01T08:00:00Z</date-time-start>
            <duration>PT10:00:00</duration>
          </recurrence-first>
          <frequency>schedule:daily</frequency>
          <byday>
            <weekday>monday</weekday>
          </byday>
          <byday>
            <weekday>tuesday</weekday>
          </byday>
          <byday>
            <weekday>wednesday</weekday>
          </byday>
          <byday>
            <weekday>thursday</weekday>
          </byday>
          <byday>
            <weekday>friday</weekday>
          </byday>
        </effective-schedule>
      </ace>
      <ace>
        <name>rule2</name>
        <matches>
          <endpoint-group
            xmlns="urn:ietf:params:xml:ns:yang:ietf-ucl-acl">
            <source-group-id>R&amp;D BYOD</source-group-id>
            <destination-group-id>finance server</destination-group-\
                                                                  id>
          </endpoint-group>
        </matches>
        <actions>
          <forwarding>reject</forwarding>
        </actions>
        <effective-schedule xmlns="urn:ietf:params:xml:ns:yang:ietf-\
                                                            ucl-acl">
          <period-start>2025-01-20T08:30:00-08:00</period-start>
          <period-end>2025-12-31T18:00:00-08:00</period-end>
        </effective-schedule>
      </ace>
    </aces>
  </acl>
</acls>

Figure 3: Example of UCL Configuration

A.2. Configuring a PEP Using Group-based ACL

This section illustrates an example to configure a PEP using the group-based ACL.¶

The PEP which enforces group-based ACL may acquire group identities from the AAA server if working as a NAS authenticating both the source endpoint and the destination endpoint users. Another case for a PEP enforcing a group-based ACL is to obtain the group identity of the source endpoint directly from the packet field [I-D.smith-vxlan-group-policy]. This example does not intend to be exhaustive.¶

Assume the mapping between device group ID and IP addresses is predefined or acquired via device authentication. Figure 4 shows the ACL configuration delivered from the controller to the PEP. This example is consistent with the example presented in Appendix A.1.¶

=============== NOTE: '\' line wrapping per RFC 8792 ================

<?xml version="1.0" encoding="utf-8"?>

<acls xmlns="urn:ietf:params:xml:ns:yang:ietf-access-control-list"
      xmlns:uacl="urn:ietf:params:xml:ns:yang:ietf-ucl-acl">
  <endpoint-groups
      xmlns="urn:ietf:params:xml:ns:yang:ietf-ucl-acl">
    <endpoint-group>
      <group-id>R&amp;D</group-id>
      <group-type>user-group</group-type>
    </endpoint-group>
    <endpoint-group>
      <group-id>R&amp;D BYOD</group-id>
      <group-type>user-group</group-type>
    </endpoint-group>
  </endpoint-groups>
  <acl>
    <name>sample-group-acl</name>
    <type>uacl:mixed-ipv4-group-type</type>
    <aces>
      <ace>
        <name>rule1</name>
        <matches>
          <endpoint-group
            xmlns="urn:ietf:params:xml:ns:yang:ietf-ucl-acl">
            <source-group-id>R&amp;D BYOD</source-group-id>
            <destination-group-id>R&amp;D</destination-group-id>
          </endpoint-group>
        </matches>
        <actions>
          <forwarding>accept</forwarding>
        </actions>
        <effective-schedule xmlns="urn:ietf:params:xml:ns:yang:ietf-\
                                                             ucl-acl"
          xmlns:schedule="urn:ietf:params:xml:ns:yang:ietf-schedule">
          <recurrence-first>
            <date-time-start>2025-01-01T08:00:00Z</date-time-start>
            <duration>PT10:00:00</duration>
          </recurrence-first>
          <frequency>schedule:daily</frequency>
          <byday>
            <weekday>monday</weekday>
          </byday>
          <byday>
            <weekday>tuesday</weekday>
          </byday>
          <byday>
            <weekday>wednesday</weekday>
          </byday>
          <byday>
            <weekday>thursday</weekday>
          </byday>
          <byday>
            <weekday>friday</weekday>
          </byday>
        </effective-schedule>
      </ace>
      <ace>
        <name>rule2</name>
        <matches>
          <endpoint-group
            xmlns="urn:ietf:params:xml:ns:yang:ietf-ucl-acl">
            <source-group-id>R&amp;D BYOD</source-group-id>
          </endpoint-group>
          <ipv4>
            <destination-ipv4-network>203.0.113.1/24</destination-\
                                                        ipv4-network>
          </ipv4>
        </matches>
        <actions>
          <forwarding>reject</forwarding>
        </actions>
        <effective-schedule xmlns="urn:ietf:params:xml:ns:yang:ietf-\
                                                            ucl-acl">
          <period-start>2025-01-20T08:30:00-08:00</period-start>
          <period-end>2025-12-31T18:00:00-08:00</period-end>
        </effective-schedule>
      </ace>
    </aces>
  </acl>
</acls>

Figure 4: Example of PEP Configuration

A.3. Configuring PEPs Using Address-based ACLs

The section describes an example of configuring a PEP using IP address based ACL. IP address based access control policies could be applied to the PEP that may not understand the group information, e.g., firewall.¶

Assume an employee in the R&D department accesses the network wirelessly from a non-corporate laptop using IP address 192.0.2.10. The SDN controller associates the user group to which the employee belongs with the user address according to step 1 to 4 in Section 4.1.¶

Assume the mapping between device group ID and IP addresses is predefined or acquired via device authentication. Figure 5 shows an IPv4 address based ACL configuration delivered from the controller to the PEP. This example is consistent with the example presented in Appendix A.1.¶

=============== NOTE: '\' line wrapping per RFC 8792 ================

<?xml version="1.0" encoding="utf-8"?>

<acls xmlns="urn:ietf:params:xml:ns:yang:ietf-access-control-list">
  <acl>
    <name>sample-group-acl</name>
    <type>ipv4-acl-type</type>
    <aces>
      <ace>
        <name>rule1</name>
        <matches>
          <ipv4>
            <destination-ipv4-network>192.168.2.1/24</destination-\
                                                        ipv4-network>
            <source-ipv4-network>192.168.1.1/24</source-ipv4-network>
          </ipv4>
        </matches>
        <actions>
          <forwarding>accept</forwarding>
        </actions>
        <effective-schedule xmlns="urn:ietf:params:xml:ns:yang:ietf-\
                                                             ucl-acl"
          xmlns:schedule="urn:ietf:params:xml:ns:yang:ietf-schedule">
          <recurrence-first>
            <date-time-start>2025-01-01T08:00:00Z</date-time-start>
            <duration>PT10:00:00</duration>
          </recurrence-first>
          <frequency>schedule:daily</frequency>
          <byday>
            <weekday>monday</weekday>
          </byday>
          <byday>
            <weekday>tuesday</weekday>
          </byday>
          <byday>
            <weekday>wednesday</weekday>
          </byday>
          <byday>
            <weekday>thursday</weekday>
          </byday>
          <byday>
            <weekday>friday</weekday>
          </byday>
        </effective-schedule>
      </ace>
      <ace>
        <name>rule2</name>
        <matches>
          <ipv4>
            <destination-ipv4-network>203.0.113.1/24</destination-\
                                                        ipv4-network>
            <source-ipv4-network>192.168.1.1/24</source-ipv4-network>
          </ipv4>
        </matches>
        <actions>
          <forwarding>reject</forwarding>
        </actions>
        <effective-schedule xmlns="urn:ietf:params:xml:ns:yang:ietf-\
                                                            ucl-acl">
          <period-start>2025-01-20T08:30:00-08:00</period-start>
          <period-end>2025-12-31T18:00:00-08:00</period-end>
        </effective-schedule>
      </ace>
    </aces>
  </acl>
</acls>

Figure 5: Example of PEP Configuration

Figure 6 shows an example of the same policy but with a destination IPv6 prefix.¶

=============== NOTE: '\' line wrapping per RFC 8792 ================

<?xml version="1.0" encoding="utf-8"?>
<acls xmlns="urn:ietf:params:xml:ns:yang:ietf-access-control-list">
  <acl>
    <name>another-sample-but-with-ipv6</name>
    <type>ipv6-acl-type</type>
    <aces>
      <ace>
        <name>rule1</name>
        <matches>
          <ipv6>
            <destination-ipv6-network>2001:db8::/64</destination-\
                                                        ipv6-network>
          </ipv6>
        </matches>
        <actions>
          <forwarding>accept</forwarding>
        </actions>
        <effective-schedule xmlns="urn:ietf:params:xml:ns:yang:ietf-\
                                                             ucl-acl"
          xmlns:schedule="urn:ietf:params:xml:ns:yang:ietf-schedule">
          <recurrence-first>
            <date-time-start>2025-01-01T08:00:00Z</date-time-start>
            <duration>PT10:00:00</duration>
          </recurrence-first>
          <frequency>schedule:daily</frequency>
          <byday>
            <weekday>monday</weekday>
          </byday>
          <byday>
            <weekday>tuesday</weekday>
          </byday>
          <byday>
            <weekday>wednesday</weekday>
          </byday>
          <byday>
            <weekday>thursday</weekday>
          </byday>
          <byday>
            <weekday>friday</weekday>
          </byday>
        </effective-schedule>
      </ace>
    </aces>
  </acl>
</acls>

Figure 6: Example of PEP Configuration (IPv6)

A YANG Data Model and RADIUS Extension for Policy-based Network Access Control

Abstract

Discussion Venues

Status of This Memo

Copyright Notice

Table of Contents