| Internet-Draft | Multicast YANG Data Model | August 2021 |
| Zhang, et al. | Expires 26 February 2022 | [Page] |
This document provides a general multicast YANG data model, which takes full advantages of existed multicast protocol models to control the multicast network, and guides the deployment of multicast service.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 26 February 2022.¶
Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.¶
Currently, there are many multicast protocol YANG models, such as PIM, MLD, and BIER and so on. But all these models are distributed in different working groups as separate files and focus on the protocol itself. Furthermore, they cannot describe a high-level multicast service required by network operators.¶
This document provides a general and all-round multicast model, which stands at a high level to take full advantages of these aforementioned models to control the multicast network, and guide the deployment of multicast service.¶
This document does not define any specific protocol model, instead, it depends on many existing multicast protocol models and relates several multicast information together to fulfill multicast service.¶
This model can be used along with other multicast YANG models such as PIM [I-D.ietf-pim-yang], which are not covered in this document.¶
The terminology for describing YANG data models is found in [RFC6020] and [RFC7950], including:¶
The following abbreviations are used in this document and the defined model:¶
BGP: Border Gateway Protocol [RFC4271].¶
BIER: Bit Index Explicit Replication [RFC8279].¶
BIER-TE: Traffic Engineering for Bit Index Explicit Replication [I-D.ietf-bier-te-arch].¶
ISIS: Intermediate System to Intermediate System Routeing Exchange Protocol [RFC1195].¶
MLD: Multicast Listener Discovery [I-D.ietf-bier-mld].¶
MLDP: Label Distribution Protocol Extensions for Point-to-Multipoint and Multipoint-to-Multipoint Label Switched Paths [RFC6388].¶
MVPN: Multicast in MPLS/BGP IP VPNs [RFC6513].¶
OSPF: Open Shortest Path First [RFC2328].¶
P2MP-TE: Point-to-Multipoint Traffic Engineering [RFC4875].¶
PIM: Protocol Independent Multicast [RFC7761].¶
SR-P2MP: Segment Routing Point-to-Multipoint [I-D.ietf-pim-sr-p2mp-policy].¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
Tree diagrams used in this document follow the notation defined in [RFC8340].¶
In this document, names of data nodes, actions, and other data model objects are often used without a prefix, as long as it is clear from the context in which YANG module each name is defined. Otherwise, names are prefixed using the standard prefix associated with the corresponding YANG module, as shown in Table 1.¶
| Prefix | YANG module | Reference |
|---|---|---|
| inet | ietf-inet-types | [RFC6991] |
| isis | ietf-isis | [I-D.ietf-isis-yang-isis-cfg] |
| ospf | ietf-ospf | [I-D.ietf-ospf-yang] |
| rt-types | ietf-routing-types | [RFC8294] |
| rt | ietf-routing | [RFC8349] |
| yang | ietf-yang-types | [RFC6991] |
This multicast YANG data model is mainly used by the management tools run by the network operators, in order to manage, monitor and debug the network resources that are used to deliver multicast service. This model is used for gathering data from the network as well.¶
+------------------------+
| Multicast Model |
+------------------------+
| | |
| | |
| +---------+ +----------+
| | EMS/NMS | |Controller|
| +---------+ +----------+
| | |
| | |
+------------------------------------------------+
| Network Element1.....N |
+------------------------------------------------+
Figure 1 illustrates example use cases for this multicast model. Network operators can use this model in a controller which is responsible to implement specific multicast flows with specific protocols and work with the corresponding protocols' model to configure the network elements through NETCONF/RESTCONF/CLI. Or network operators can use this model to the EMS (Element Management System)/ NMS (Network Management System) to manage or configure the network elements directly.¶
On the other hand, when the network elements detect failure or some other changes, the network devices can send the affected multicast flows and the associated overlay/ transport/ underlay information to the controller. Then the controller/ EMS/NMS can respond immediately due to the failure and distribute new model for the flows to the network nodes quickly. Such as the changing of the failure overlay protocol to another one, as well as transport and underlay protocol.¶
Specifically, in section 3, it provides a human readability of the whole multicast network through UML like class diagram, which frames different multicast components and correlates them in a readable fashion. Then, based on this UML like class diagram, there is instantiated and detailed YANG model in Section 4.¶
The usage of this model is flexible. The multicast-keys indicate the flow characters. The flow can be L3 multicast flow, or L2 flow which is also called BUM (Broadcast, Unknown unicast, Multicast) flow in EVPN ([RFC7432]) deployment.¶
Among the multicast-keys, the group-address of L3 multicast flow and the mac-address of BUM flow are the most important keys. The other keys are optional, and need not be all set. For example, only group-address is set, this is (*,G) analogous. If source-address and group-address are both set, this is (S,G) analogous. In addition to the source-address and group-address, when vpn-rd is also set, this is MVPN use case. If mac-address and vpn-rd are set, this is EVPN use case. In case vni-value is set with associated group-address, etc., this is NVO3 multicast use case.¶
+------------+
| +---------------------------+
+--------------+ Controller | |
| | +-----------+ |
| +------------+ | |
| | |
| +-----------------------------+ | |
| | | | |
| | +------+---+--+ |
| | |Egress router+--+ Receiver|
| | +------+------+ |
+---+-----+----+ | |
Source +-|Ingress router| BIER domain | |
+---------+----+ | |
| +------+------+ |
| |Egress router+--+ Receiver|
| +------+----+-+ |
| | | |
+-----------------------------+ +--------------+
The network administrator can use the multicast model and associated models to deploy the multicast service. For example, suppose that the flow for a multicast service is 233.252.0.0/16, the flow should be forwarded by BIER [RFC8279] with MPLS encapsulation [RFC8296]. Corresponding IGP protocol which is used to build BIER transport layer is OSPF [RFC2328].¶
In this model, the corresponding group-address that is in multicast-keys is set to 233.252.0.0/16, the transport technology is set to BIER. The BIER underlay protocol is set to OSPF. The model is sent to every edge router from the controller. If the BIER transport layer which depends on OSPF has not been built in the network, the multicast YANG model may invoke the BIER YANG model that is defined in [I-D.ietf-bier-bier-yang] generation in the controller. After the BIER transport layer is built, the ingress router encapsulates the multicast flow with BIER header and sends it into the network. Intermediate routers forward the flows to all the egress nodes by BIER forwarding.¶
Another example for this figure is, the controller can act as the BIER overlay only. The routers in the domain build BIER forwarding plane beforehand. The controller sends the multicast group-address and/or the source-address to the edge routers in BIER domain only, without transport and underlay set in the model. Then the ingres router can encapsulate the multicast flow with BIER encapsulation automatically.¶
This model can be used to configure and manage Multicast service. The operational state data can be retrieved by this model. The subscription and push mechanism defined in [RFC8639] and [RFC8641] can be implemented by the user to subscribe to notifications on the data nodes in this model.¶
The model contains all the basic configuration parameters to operate the model. Depending on the implementation choices, some systems may not allow some of the advanced parameters to be configurable. The occasionally implemented parameters are modeled as optional features in this model. This model can be extended, and it has been structured in a way that such extensions can be conveniently made.¶
The configuration data nodes cover configurations. The container "multicast-model" is the top level container in this data model. The presence of this container is expected to enable Multicast service functionality. The notification is used to notify the controller that there is error and the error reason.¶
This model imports and augments the ietf-routing YANG model defined in [RFC8349]. Both configuration data nodes and state data nodes of [RFC8349] are augmented.¶
The YANG data model defined in this document conforms to the Network Management Datastore Architecture (NMDA) [RFC8342]. The operational state data is combined with the associated configuration data in the same hierarchy [RFC8407].¶
The following is a UML like diagram for Multicast YANG data Model.¶
+-----------+
+-----+Multi|keys |
| +-----------+
| |Group Addr |
| +-----------+
| |Source Addr| +--------+-----------------+
| +-----------+ | | |
| |VPN Info | | | +------+-------+
| +-----------+ | +-----+------+ | Ing/Eg Nodes |
| |VNI Info | | |Overlay Tech| +--------------+
| +-----------+ | +------------+ |Ingress Nodes |
| | | EVPN | +--------------+
| | +------------+ |Egress Nodes |
| Contain | | MLD | +-------+------+
| +-----------+ | +------------+ | relate
| | Multicast +----+ |MLD-Snooping| \|/
+-----+ Overlay | +------------+ +----------------+
| | | | MVPN | | BIER Nodes Info|
| +-----------+ +------------+ +----------------+
| | PIM | | BFR-ID |
| +------------+ +----------------+
|
+--------+--+ +---------------+----------+----------+
| Multicast |Contain | | | |
| Model | | +--+---+ +---+----+ +--+---+
+--------+--+ | | BIER | |BIER-TE | | MPLS |
| +---------+--+ +------+ +--------+ +------+
| | Multicast |
+----+ Transport | invoke +-----+ +----------+ +-------+
| | | | PIM | |Cisco Mode| |SR-P2MP|
| +---------+--+ +--+--+ +----+-----+ +---+---+
| | | | |
| | | | |
| +---------------+----------+-----------+
|
| +--------------+---------+---------+
| | | | |
| | +--+---+ +--+---+ +--+--+
| +----------+-- | BABEL| | BGP | |ISIS |
| | Multicast | +------+ +------+ +-----+
+----+ Underlay | invoke
| | +------+ +------+ +-----+
+----------+-- | OSPF | | PIM | |RIFT |
| +--+---+ +--+---+ +--+--+
| | | |
+--------------+---------+---------+
module: ietf-multicast-model
+--rw multicast-model
+--rw multicast-keys*
[vpn-rd source-address group-address mac-address vni-value]
+--rw vpn-rd rt-types:route-distinguisher
+--rw source-address ip-multicast-source-address
+--rw group-address
| rt-types:ip-multicast-group-address
+--rw mac-address yang:mac-address
+--rw vni-value uint32
+--rw multicast-overlay
| +--rw vni-type? virtual-type
| +--rw ingress-egress
| | +--rw ingress-nodes* [ingress-node]
| | | +--rw ingress-node inet:ip-address
| | +--rw egress-nodes* [egress-node]
| | +--rw egress-node inet:ip-address
| +--rw bier-ids {bier}?
| | +--rw sub-domain? uint16
| | +--rw ingress-nodes* [ingress-node]
| | | +--rw ingress-node uint16
| | +--rw egress-nodes* [egress-node]
| | +--rw egress-node uint16
| +--rw dynamic-overlay
| +--rw type? identityref
| +--rw mld
| +--rw mld-instance-group?
| rt-types:ip-multicast-group-address
+--rw multicast-transport
| +--rw type? identityref
| +--rw bier
| | +--rw sub-domain? uint16
| | +--rw bitstringlength? uint16
| | +--rw set-identifier? uint16
| | +--rw (encap-type)?
| | +--:(mpls)
| | +--:(eth)
| | +--:(ipv6)
| +--rw bier-te
| | +--rw sub-domain? uint16
| | +--rw bitstringlength? uint16
| | +--rw set-identifier? uint16
| | +--rw (encap-type)?
| | | +--:(mpls)
| | | +--:(eth)
| | | +--:(ipv6)
| | +--rw bitstring* [name]
| | +--rw name string
| | +--rw bier-te-adj* [adj-id]
| | +--rw adj-id uint16
| +--rw cisco-mdt
| | +--rw p-group? rt-types:ip-multicast-group-address
| +--rw rsvp-te-p2mp
| | +--rw template-name? string
| +--rw pim
| | +--rw source-address? ip-multicast-source-address
| | +--rw group-address
| | rt-types:ip-multicast-group-address
| +--rw sr-p2mp
| +--rw ir-segment-lists* [name]
| | +--rw name string
| +--rw replication-segment* [replication-id node-id]
| +--rw replication-id tree-sid
| +--rw node-id inet:ip-address
+--rw multicast-underlay
+--rw type? identityref
+--rw ospf
| +--rw topology? string
+--rw isis
| +--rw topology? string
+--rw pim
+--rw source-address? ip-multicast-source-address
+--rw group-address
rt-types:ip-multicast-group-address
notifications:
+---n ingress-egress-event
+--ro event-type? enumeration
+--ro multicast-key
| +--ro vpn-rd? rt-types:route-distinguisher
| +--ro source-address? ip-multicast-source-address
| +--ro group-address? rt-types:ip-multicast-group-address
| +--ro mac-address? yang:mac-address
| +--ro vni-value? uint32
+--ro dynamic-overlay
| +--ro type? identityref
| +--ro mld
| +--ro mld-instance-group?
| rt-types:ip-multicast-group-address
+--ro transport-tech
| +--ro type? identityref
| +--ro bier
| | +--ro sub-domain? uint16
| | +--ro bitstringlength? uint16
| | +--ro set-identifier? uint16
| | +--ro (encap-type)?
| | +--:(mpls)
| | +--:(eth)
| | +--:(ipv6)
| +--ro bier-te
| | +--ro sub-domain? uint16
| | +--ro bitstringlength? uint16
| | +--ro set-identifier? uint16
| | +--ro (encap-type)?
| | | +--:(mpls)
| | | +--:(eth)
| | | +--:(ipv6)
| | +--ro bitstring* [name]
| | +--ro name string
| | +--ro bier-te-adj* [adj-id]
| | +--ro adj-id uint16
| +--ro cisco-mdt
| | +--ro p-group? rt-types:ip-multicast-group-address
| +--ro rsvp-te-p2mp
| | +--ro template-name? string
| +--ro pim
| | +--ro source-address? ip-multicast-source-address
| | +--ro group-address
| | rt-types:ip-multicast-group-address
| +--ro sr-p2mp
| +--ro ir-segment-lists* [name]
| | +--ro name string
| +--ro replication-segment* [replication-id node-id]
| +--ro replication-id tree-sid
| +--ro node-id inet:ip-address
+--ro underlay-tech
+--ro type? identityref
+--ro ospf
| +--ro topology? string
+--ro isis
| +--ro topology? string
+--ro pim
+--ro source-address? ip-multicast-source-address
+--ro group-address
rt-types:ip-multicast-group-address
¶
This model is used with other protocol data model to provide multicast service.¶
This model includes multicast service keys and three layers: the multicast overlay, the transport layer and the multicast underlay information. Multicast keys include the features of multicast flow, such as(vpnid, multicast source and multicast group) information. In data center network, for fine-grained to gather the nodes belonging to the same virtual network, there may need VNI-related information to assist.¶
Multicast overlay defines (ingress-node, egress-nodes) nodes information. If the transport layer is BIER, there may define BIER information including (Subdomain, ingress-node BFR-id, egress-nodes BFR-id). If no (ingress-node, egress-nodes) information are defined directly, there may need overlay multicast signaling technology, such as MLD or MVPN, to collect these nodes information.¶
Multicast transport layer defines the type of transport technologies that can be used to forward multicast flow, including BIER forwarding type, MPLS forwarding type, or PIM forwarding type and so on. One or several transport technologies could be defined at the same time. As for the detailed parameters for each transport technology, this multicast YANG data model may invoke the corresponding protocol model to define them.¶
Multicast underlay defines the type of underlay technologies, such as OSPF, ISIS, BGP, PIM or BABEL and so on. One or several underlay technologies could be defined at the same time if there is protective requirement. As for the specific parameters for each underlay technology, this multicast YANG data model can depend the corresponding protocol model to configure them as well.¶
The configuration modeling branch is composed of the keys, overlay layer, transport layer and underlay layer.¶
Multicast model states are the same with the configuration.¶
The defined Notifications include the events of ingress or egress nodes. Like ingress node failure, overlay/ transport/ underlay module loading/ unloading. And the potential failure about some multicast flows and associated overlay/ transport/ underlay technologies.¶
This module references [RFC1195], [RFC2328], [RFC4271], [RFC4541], [RFC4875], [RFC5340], [RFC6037], [RFC6388], [RFC6513], [RFC6991], [RFC7348], [RFC7432], [RFC7637], [RFC7716], [RFC7761], [RFC8279], [RFC8294], [RFC8296], [RFC8343], [RFC8344], [RFC8349], [RFC8639], [RFC8641], [RFC8926], [RFC8966], [I-D.ietf-pim-yang], [I-D.ietf-bier-bier-yang], [I-D.ietf-bier-te-arch], [I-D.ietf-bier-mld], [I-D.ietf-bess-evpn-bum-procedure-updates], [I-D.ietf-bier-evpn], [I-D.ietf-bier-bierin6], [I-D.ietf-bier-pim-signaling], [I-D.ietf-rift-rift], [I-D.ietf-isis-yang-isis-cfg].¶
<CODE BEGINS> file "ietf-multicast-model@2021-08-26.yang"
module ietf-multicast-model {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-multicast-model";
prefix ietf-multicast-model;
import ietf-yang-types {
prefix "yang";
reference
"RFC 6991: Common YANG Data Types";
}
import ietf-inet-types {
prefix "inet";
reference
"RFC 6991: Common YANG Data Types";
}
import ietf-routing-types {
prefix "rt-types";
reference
"RFC 8294: Common YANG Data Types for the Routing Area";
}
import ietf-routing {
prefix "rt";
reference
"RFC 8349: A YANG Data Model for Routing Management
(NMDA Version)";
}
organization " IETF MBONED (MBONE Deployment) Working Group";
contact
"WG List: <mailto:mboned@ietf.org>
Editor: Zheng Zhang
<mailto:zhang.zheng@zte.com.cn>
Editor: Cui Wang
<mailto:lindawangjoy@gmail.com>
Editor: Ying Cheng
<mailto:chengying10@chinaunicom.cn>
Editor: Xufeng Liu
<mailto:xufeng.liu.ietf@gmail.com>
Editor: Mahesh Sivakumar
<mailto:sivakumar.mahesh@gmail.com>
";
// RFC Ed.: replace XXXX with actual RFC number and remove
// this note
description
"The module defines the YANG definitions for multicast service
management.
Copyright (c) 2021 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX
(https://www.rfc-editor.org/info/rfcXXXX); see the RFC
itself for full legal notices.
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
are to be interpreted as described in BCP 14 (RFC 2119)
(RFC 8174) when, and only when, they appear in all
capitals, as shown here.";
revision 2021-08-26 {
description
"Initial revision.";
reference
"RFC XXXX: A YANG Data Model for multicast YANG.";
}
/*
*feature
*/
feature bier {
description
"Cooperation with BIER technology.";
reference
"RFC 8279:
Multicast Using Bit Index Explicit Replication (BIER).";
}
/*
*typedef
*/
typedef ip-multicast-source-address {
type union {
type enumeration {
enum * {
description
"Any source address.";
}
}
type inet:ipv4-address;
type inet:ipv6-address;
}
description
"Multicast source IP address type.";
}
typedef tree-sid {
type union {
type rt-types:mpls-label;
type inet:ip-prefix;
}
description
"The type of the Segment Identifier of a Replication segment
is a SR-MPLS label or a SRv6 SID.";
}
typedef virtual-type {
type enumeration {
enum vxlan {
description
"The VXLAN encapsulation is used for flow encapsulation.";
reference
"RFC 7348: Virtual eXtensible Local Area Network (VXLAN):
A Framework for Overlaying Virtualized Layer 2 Networks
over Layer 3 Networks.";
}
enum nvgre {
description
"The NVGRE encapsulation is used for flow encapsulation.";
reference
"RFC 7637: NVGRE: Network Virtualization Using Generic
Routing Encapsulation.";
}
enum geneve {
description
"The GENEVE encapsulation is used for flow encapsulation.";
reference
"RFC 8926: Geneve: Generic Network
Virtualization Encapsulation.";
}
}
description
"The encapsulation type used for the flow.
When this type is set, the associated vni-value
MUST be set.";
} // virtual-type
/*
* Identities
*/
identity multicast-model {
base "rt:control-plane-protocol";
description "Identity for the multicast model.";
}
identity overlay-type {
description
"Base identity for the type of multicast overlay technology.";
}
identity transport-type {
description "Identity for the multicast transport technology.";
}
identity underlay-type {
description "Identity for the multicast underlay technology.";
}
identity overlay-pim {
base overlay-type;
description
"Using PIM as multicast overlay technology.
For example, as BIER overlay.";
reference
"I-D.ietf-bier-pim-signaling:
PIM Signaling Through BIER Core.";
}
identity mld {
base overlay-type;
description
"Using MLD as multicast overlay technology.
For example, as BIER overlay.";
reference
"I-D.ietf-bier-mld:
BIER Ingress Multicast Flow Overlay
using Multicast Listener Discovery Protocols.";
}
identity mld-snooping {
base overlay-type;
description
"Using MLD as multicast overlay technology.
For example, as BIER overlay.";
reference
"RFC 4541:
Considerations for Internet Group Management
Protocol (IGMP) and Multicast Listener
Discovery (MLD) Snooping Switches.";
}
identity evpn {
base overlay-type;
description
"Using EVPN as multicast overlay technology.";
reference
"RFC 7432: BGP MPLS-Based Ethernet VPN.
I-D.ietf-bess-evpn-bum-procedure-updates:
Updates on EVPN BUM Procedures.
I-D.ietf-bier-evpn: EVPN BUM Using BIER.";
}
identity mvpn {
base overlay-type;
description
"Using MVPN as multicast overlay technology.";
reference
"RFC 6513: Multicast in MPLS/BGP IP VPNs.
RFC 7716:
Global Table Multicast with BGP Multicast VPN
(BGP-MVPN) Procedures.";
}
identity bier {
base transport-type;
description
"Using BIER as multicast transport technology.";
reference
"RFC 8279:
Multicast Using Bit Index Explicit Replication (BIER).";
}
identity bier-te {
base transport-type;
description
"Using BIER-TE as multicast transport technology.";
reference
"I-D.ietf-bier-te-arch:
Traffic Engineering for Bit Index Explicit Replication
(BIER-TE)";
}
identity mldp {
base transport-type;
description
"Using mLDP as multicast transport technology.";
reference
"RFC 6388:
Label Distribution Protocol Extensions
for Point-to-Multipoint and Multipoint-to-Multipoint
Label Switched Paths.
I-D.ietf-mpls-mldp-yang: YANG Data Model for MPLS mLDP.";
}
identity rsvp-te-p2mp {
base transport-type;
description
"Using P2MP TE as multicast transport technology.";
reference
"RFC 4875:
Extensions to Resource Reservation Protocol
- Traffic Engineering (RSVP-TE) for Point-to-Multipoint
TE Label Switched Paths (LSPs).";
}
identity sr-p2mp {
base transport-type;
description
"Using Segment Routing as multicast transport technology.";
reference
"I-D.ietf-pim-sr-p2mp-policy:
Segment Routing Point-to-Multipoint Policy.";
}
identity cisco-mdt {
base transport-type;
description
"Using cisco MDT for multicast transport technology.";
reference
"RFC 6037:
Cisco Systems' Solution for Multicast in BGP/MPLS IP VPNs";
}
identity pim {
base transport-type;
base underlay-type;
description
"Using PIM as multicast transport technology.";
reference
"RFC 7761:
Protocol Independent Multicast - Sparse Mode
(PIM-SM): Protocol Specification (Revised).";
}
identity bgp {
base underlay-type;
description
"Using BGP as underlay technology to build the multicast
transport layer. For example, using BGP as BIER underlay.";
reference
"I-D.ietf-bier-idr-extensions: BGP Extensions for BIER.";
}
identity ospf {
base underlay-type;
description
"Using OSPF as multicast underlay technology.
For example, using OSPF as BIER underlay.";
reference
"RFC 8444:
OSPFv2 Extensions for Bit Index Explicit Replication (BIER),
I-D.ietf-bier-ospfv3-extensions:
OSPFv3 Extensions for BIER.";
}
identity isis {
base underlay-type;
description
"Using ISIS as multicast underlay technology.
For example, using ISIS as BIER underlay.";
reference
"RFC 8401:
Bit Index Explicit Replication (BIER) Support via IS-IS";
}
identity babel {
base underlay-type;
description
"Using BABEL as multicast underlay technology.
For example, using BABEL as BIER underlay.";
reference
"RFC 8966: The Babel Routing Protocol
I-D.zhang-bier-babel-extensions: BIER in BABEL";
}
identity rift {
base underlay-type;
description
"Using RIFT as multicast underlay technology.
For example, using RIFT as BIER underlay.";
reference
"I-D.ietf-rift-rift: RIFT: Routing in Fat Trees.
I-D.zzhang-bier-rift: Supporting BIER with RIFT";
}
grouping general-multicast-key {
description
"The general multicast keys. They are used to distinguish
different multicast service.";
leaf vpn-rd {
type rt-types:route-distinguisher;
description
"A Route Distinguisher used to distinguish
routes from different MVPNs.";
reference
"RFC 8294: Common YANG Data Types for the Routing Area.
RFC 6513: Multicast in MPLS/BGP IP VPNs.";
}
leaf source-address {
type ip-multicast-source-address;
description
"The IPv4/IPv6 source address of the multicast flow. The
value set to zero means that the receiver interests
in all source that relevant to one given group.";
}
leaf group-address {
type rt-types:ip-multicast-group-address;
description
"The IPv4/IPv6 group address of multicast flow. This
type represents a version-neutral IP multicast group
address. The format of the textual representation
implies the IP version.";
reference
"RFC 8294: Common YANG Data Types for the Routing Area.";
}
leaf mac-address {
type yang:mac-address;
description
"The mac address of flow. In the EVPN situation, the L2
flow that is called
BUM (Broadcast, Unknown Unicast, Multicast)
can be sent to the other PEs that
are in a same broadcast domain.";
reference
"RFC 6991: Common YANG Data Types.
RFC 7432: BGP MPLS-Based Ethernet VPN.";
}
leaf vni-value {
type uint32;
description
"The value of Vxlan network identifier, virtual subnet ID
or virtual net identifier. This value and vni-type is used
to indicate a specific virtual multicast service.";
}
} // general-multicast-key
grouping encap-type {
description
"The encapsulation type used for flow forwarding.
This encapsulation acts as the inner encapsulation,
as compare to the outer multicast-transport encapsulation.";
choice encap-type {
case mpls {
description "The BIER forwarding depends on mpls.";
reference
"RFC 8296: Encapsulation for Bit Index Explicit
Replication (BIER) in MPLS and Non-MPLS Networks.";
}
case eth {
description "The BIER forwarding depends on ethernet.";
reference
"RFC 8296: Encapsulation for Bit Index Explicit
Replication (BIER) in MPLS and Non-MPLS Networks.";
}
case ipv6 {
description "The BIER forwarding depends on IPv6.";
reference
"I-D.ietf-bier-bierin6: BIER in IPv6 (BIERin6)";
}
description "The encapsulation type in BIER.";
}
} // encap-type
grouping bier-key {
description
"The key parameters set for BIER/BIER TE forwarding.";
reference
"RFC 8279: Multicast Using Bit Index Explicit Replication
(BIER).";
leaf sub-domain {
type uint16;
description
"The subdomain id that the multicast flow belongs to.";
}
leaf bitstringlength {
type uint16;
description
"The bitstringlength used by BIER forwarding.";
}
leaf set-identifier {
type uint16;
description
"The set identifier used by the multicast flow.";
}
uses encap-type;
}
grouping transport-tech {
description
"The transport technology selected for the multicast service.
For one specific multicast flow, it's better to use only one
transport technology for forwarding.";
leaf type {
type identityref {
base transport-type;
}
description "The type of transport technology";
}
container bier {
when "../type = 'ietf-multicast-model:bier'" {
description
"Only when BIER is used as transport technology.";
}
description
"The transport technology is BIER. The BIER technology
is introduced in RFC8279. The parameters are consistent
with the definition in BIER YANG data model.";
reference
"I-D.ietf-bier-bier-yang:
YANG Data Model for BIER Protocol.";
uses bier-key;
}
container bier-te {
when "../type = 'ietf-multicast-model:bier-te'" {
description
"Only when BIER-TE is used as transport technology.";
}
description
"The BIER-TE parameter that may need to be set.
The parameters are consistent with the definition in
BIER and BIER TE YANG data model.";
reference
"I-D.ietf-bier-bier-yang:
YANG Data Model for BIER Protocol
I-D.ietf-bier-te-yang:
A YANG data model for Traffic Engineering for Bit Index
Explicit Replication (BIER-TE)";
uses bier-key;
list bitstring {
key "name";
leaf name {
type string;
description "The name of the bitstring";
}
list bier-te-adj {
key "adj-id";
leaf adj-id {
type uint16;
description
"The link adjacency ID used for BIER TE forwarding.";
}
description
"The adjacencies ID used for BIER TE bitstring
encapsulation.";
}
description
"The bitstring name and detail used for BIER TE
forwarding encapsulation. One or more bitstring can be
used for backup path.";
}
}
container cisco-mdt {
when "../type = 'ietf-multicast-model:cisco-mdt'" {
description
"Only when cisco MDT is used as transport technology.";
}
description "The MDT parameter that may need to be set.";
leaf p-group {
type rt-types:ip-multicast-group-address;
description
"The address of p-group. It is used to encapsulate
and forward flow according to multicast tree from
ingress node to egress nodes.";
}
}
container rsvp-te-p2mp {
when "../type = 'ietf-multicast-model:rsvp-te-p2mp'" {
description
"Only when RSVP TE P2MP is used as transport technology.";
}
description
"The parameter that may be set. They are consistent with
the definition in TE data model.";
reference
"RFC 8776: Common YANG Data Types for Traffic Engineering";
leaf template-name {
type string {
pattern '/?([a-zA-Z0-9\-_.]+)(/[a-zA-Z0-9\-_.]+)*';
}
description
"A type for the name of a TE node template or TE link
template.";
}
}
container pim {
when "../type = 'ietf-multicast-model:pim'" {
description
"Only when PIM is used as transport technology.";
}
description "The PIM parameter that may need to be set.";
uses pim;
}
container sr-p2mp {
when "../type = 'ietf-multicast-model:sr-p2mp'" {
description
"Only when segment routing P2MP is used as transport
technology.";
}
description "The SR-P2MP parameter that may need to be set.";
list ir-segment-lists {
key "name";
leaf name {
type string;
description "Segment-list name";
}
description
"The segment lists used for ingress replication.
The name refers a segment list.";
}
list replication-segment {
key "replication-id node-id";
leaf replication-id {
type tree-sid;
description
"The identifier for a Replication segment that is
unique in context of the Replication Node.
This is a SR-MPLS label or a SRv6 SID";
}
leaf node-id {
type inet:ip-address;
description
"The address of the Replication Node that the
Replication segment is for.";
}
description
"A Multi-point service delivery could be realized via
P2MP trees in a Segment Routing domain.
It may consist of one or more Replication segment";
reference
"I-D.ietf-spring-sr-replication-segment:
SR Replication Segment for Multi-point Service
Delivery.";
}
} // sr-p2mp
} // transport-tech
grouping underlay-tech {
description
"The underlay technology selected for the transport layer.
The underlay technology has no straight relationship with
the multicast overlay, it is used for transport path
building, for example BIER forwarding path building.";
leaf type {
type identityref {
base underlay-type;
}
description "The type of underlay technology";
}
container ospf {
when "../type = 'ietf-multicast-model:ospf'" {
description
"Only when OSPF is used as underay technology.";
}
description
"If OSPF protocol supports multiple topology feature,
the associated topology name may be assigned.
In case the topology name is assigned, the specific
OSPF topology is used for underly to building the
transport layer.";
reference
"RFC 4915: Multi-Topology Routing";
leaf topology {
type string;
description
"The designed topology name of ospf protocol.";
}
}
container isis {
when "../type = 'ietf-multicast-model:isis'" {
description
"Only when ISIS is used as underay technology.";
}
description
"If ISIS protocol supports multiple topology feature,
the associated topology name may be assigned.
In case the topology name is assigned, the specific
ISIS topology is used for underly to building the
transport layer.";
reference
"RFC 5120: M-IS-IS: Multi Topology Routing in IS-IS";
leaf topology {
type string;
description
"The designed topology name of isis protocol.";
}
}
container pim {
when "../type = 'ietf-multicast-model:pim'" {
description
"Only when PIM is used as underay technology.";
}
description "The PIM parameter that may need to be set.";
uses pim;
}
} // underlay-tech
/*overlay*/
grouping overlay-tech {
container dynamic-overlay {
leaf type {
type identityref {
base overlay-type;
}
description "The type of overlay technology";
}
container mld {
when "../type = 'ietf-multicast-model:mld'" {
description
"Only when MLD is used as overlay technology.";
}
description "The MLD parameter that may need to be set.";
leaf mld-instance-group {
type rt-types:ip-multicast-group-address;
description
"The multicast address used for multiple MLD instance
support.";
}
}
description
"The dynamic overlay technologies and associated parameter
that may be set.";
}
description "The overlay technology used for multicast service.";
} // overlay-tech
/*transport*/
grouping pim {
description
"The required information of pim transportion.";
leaf source-address {
type ip-multicast-source-address;
description
"The IPv4/IPv6 source address of the multicast flow. The
value set to zero means that the receiver interests
in all source that relevant to one given group.";
}
leaf group-address {
type rt-types:ip-multicast-group-address;
mandatory true;
description
"The IPv4/IPv6 group address of multicast flow. This
type represents a version-neutral IP multicast group
address. The format of the textual representation
implies the IP version.";
}
reference
"RFC 7761: Protocol Independent Multicast - Sparse Mode
(PIM-SM): Protocol Specification (Revised).";
} //pim
/*underlay*/
container multicast-model {
description
"The model of multicast YANG data. Include keys, overlay,
transport and underlay.";
list multicast-keys{
key "vpn-rd source-address group-address mac-address vni-value";
uses general-multicast-key;
container multicast-overlay {
description
"The overlay information of multicast service.
Overlay technology is used to exchange multicast
flows information. Overlay technology may not be
used in SDN controlled completely situation, but
it can be used in partial SDN controlled situation
or non-SDN controlled situation. Different overlay
technologies can be choosed according to different
deploy consideration.";
leaf vni-type {
type virtual-type;
description
"The encapsulated type for the multicast flow,
it is used to carry the virtual network identifier
for the multicast service.";
}
container ingress-egress {
description
"The ingress and egress nodes address collection.
The ingress node may use the egress nodes set
directly to encapsulate the multicast flow by
transport technology.";
list ingress-nodes {
key "ingress-node";
description
"The egress nodes of multicast flow.";
leaf ingress-node {
type inet:ip-address;
description
"The ip address of ingress node for one or more
multicast flow. Or the ingress node of MVPN and
BIER. In MVPN, this is the address of ingress
PE; in BIER, this is the BFR-prefix of ingress
nodes.
Two or more ingress nodes may existed for the
redundant ingress node protection.";
}
}
list egress-nodes {
key "egress-node";
description
"The egress multicast nodes of the multicast flow.
Or the egress node of MVPN and BIER. In MVPN, this
is the address of egress PE; in BIER, this is the
BFR-prefix of ingress nodes.";
leaf egress-node {
type inet:ip-address;
description
"The ip-address set of egress multicast nodes.";
}
}
}
container bier-ids {
if-feature bier;
description
"The BFR-ids of ingress and egress BIER nodes for
one or more multicast flows. This overlay is used
with BIER transport technology. The egress nodes
set can be used to encapsulate the multicast flow
directly in the ingress node.";
reference
"RFC 8279: Multicast Using Bit Index Explicit
Replication (BIER)";
leaf sub-domain {
type uint16;
description
"The sub-domain that this multicast flow belongs to.";
}
list ingress-nodes {
key "ingress-node";
description
"The ingress nodes of multicast flow.";
leaf ingress-node {
type uint16;
description
"The ingress node of multicast flow. This is the
BFR-id of ingress nodes.";
}
}
list egress-nodes {
key "egress-node";
description
"The egress nodes of multicast flow.";
leaf egress-node {
type uint16;
description
"The BFR-ids of egress multicast BIER nodes.";
}
}
}
uses overlay-tech;
}
container multicast-transport {
description
"The transportion of multicast service. Transport
protocol is responsible for delivering multicast
flows from ingress nodes to egress nodes with or
without specific encapsulation. Different transport
technology can be choosed according to different
deploy consideration. Once a transport technology
is choosed, associated protocol should be triggered
to run.";
uses transport-tech;
}
container multicast-underlay {
description
"The underlay of multicast service. Underlay protocol
is used to build transport layer. Underlay protocol
need not be assigned in ordinary network since
existed underlay protocol fits well, but it can be
assigned in particular networks for better
controll. Once a underlay technology is choosed,
associated protocol should be triggered to run.";
uses underlay-tech;
}
description
"The model of multicast YANG data. Include keys,
overlay, transport and underlay.";
}
}
/*Notifications*/
notification ingress-egress-event {
leaf event-type {
type enumeration {
enum down {
description
"There is something wrong with ingress or egress node,
and node can't work properlay.";
}
enum protocol-enabled {
description
"The protocol that is used for multicast
flows have been enabled.";
}
enum protocol-disabled {
description
"The protocol that is used by multicast
flows have been disabled.";
}
}
description "Event type.";
}
container multicast-key {
uses general-multicast-key;
description
"The associated multicast keys that are influenced by
ingress or egress node failer.";
}
uses overlay-tech;
container transport-tech {
description
"The modules can be used to forward multicast flows.";
uses transport-tech;
}
container underlay-tech {
description
"There is something wrong with the module which is
used to build multicast transport layer.";
uses underlay-tech;
}
description
"Notification events for the ingress or egress nodes. Like
node failer, overlay/ transport/ underlay module
loading/ unloading. And the potential failer about some
multicast flows and associated
overlay/ transport/ underlay technologies.";
}
}
<CODE ENDS>¶
The YANG module specified in this document defines a schema for data that is designed to be accessed via network management protocols such as NETCONF [RFC6241] or RESTCONF [RFC8040]. The lowest NETCONF layer is the secure transport layer, and the mandatory-to-implement secure transport is Secure Shell (SSH) [RFC6242]. The lowest RESTCONF layer is HTTPS, and the mandatory-to-implement secure transport is TLS [RFC8446].¶
The NETCONF access control model [RFC8341] provides the means to restrict access for particular NETCONF or RESTCONF users to a preconfigured subset of all available NETCONF or RESTCONF protocol operations and content.¶
There are a number of data nodes defined in this YANG module that are writable/creatable/deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) to these data nodes without proper protection can have a negative effect on network operations. These are data nodes and their sensitivity/vulnerability:¶
Under /rt:routing/rt:control-plane-protocols/multicast-model,¶
multicast-model¶
Some of the readable data nodes in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get-config, or notification) to these data nodes. These are the data nodes and their sensitivity/vulnerability:¶
/rt:routing/rt:control-plane-protocols/multicast-model,¶
Unauthorized access to any data node of the above tree can disclose the operational state information of multicast service on this device.¶
RFC Ed.: Please replace all occurrences of 'XXXX' with the actual RFC number (and remove this note).¶
The IANA is requested to assign one new URI from the IETF XML registry [RFC3688]. Authors are suggesting the following URI:¶
URI: urn:ietf:params:xml:ns:yang:ietf-multicast-model¶
Registrant Contact: The IESG¶
XML: N/A, the requested URI is an XML namespace¶
This document also requests one new YANG module name in the YANG Module Names registry [RFC6020] with the following suggestion:¶
name: ietf-multicast-model¶
namespace: urn:ietf:params:xml:ns:yang:ietf-multicast-model¶
prefix: multicast-model¶
reference: RFC XXXX¶
The authors would like to thank Stig Venaas, Jake Holland, Min Gu, Gyan Mishra for their valuable comments and suggestions.¶
This section contains an example of an instance data tree in JSON encoding [RFC7951], containing configuration data.¶
The configuration example:¶
{
"ietf-multicast-model:multicast-model":{
"multicast-keys":[
{
"vpn-rd":"0:65532:4294967292",
"source-address":"*",
"group-address":"234.232.203.84",
"mac-address": "00:00:5e:00:53:01",
"vni-value":0,
"multicast-overlay":{
"vni-type":"nvgre",
"ingress-egress":{
"ingress-nodes":[
{
"ingress-node":"146.150.100.0"
}
],
"egress-nodes":[
{
"egress-node":"110.141.168.0"
}
]
}
},
"multicast-transport":{
"type": "ietf-multicast-model:bier",
"bier":{
"sub-domain":0,
"bitstringlength":256,
"set-identifier":0
}
},
"multicast-underlay":{
"type": "ietf-multicast-model:ospf",
"ospf":{
"topology":"2"
}
}
}
]
}
}
¶