| Internet-Draft | Multicast Telemetry | July 2022 |
| Song, et al. | Expires 6 January 2023 | [Page] |
This document discusses the requirements of on-path telemetry for multicast traffic using In-situ OAM. Applying In-situ OAM for multicast telemetry presents some unique challenges. This document provides the solutions based on the In-situ OAM trace option and direct export option to support the telemetry data correlation and the multicast tree reconstruction without collecting redundant data.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119][RFC8174] when, and only when, they appear in all capitals, as shown here.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 6 January 2023.¶
Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
Multicast traffic is used across operator networks to support residential broadband customers, private MPLS customers and used with corporate intranet internal customers. Multicast provides real time interactive online meetings or podcasts, IPTV and financial markets real-time data, which all have a reliance on UDP's unreliable transport. End to end QOS, therefore, should be a critical component of multicast deployment in order to provide a good end user viewing experience. If a packet is dropped, and that packet happens to be a reference frame (I-Frame) in the video feed, the client receiver of the multicast feed goes into buffering mode resulting in a frozen window. Multicast packet drops and delay can severely affect the application performance and user experience.¶
It is important to monitor the performance of the multicast traffic. New on-path telemetry techniques such as In-situ OAM (IOAM) [RFC9197], IOAM Direct Export (DEX) [I-D.ietf-ippm-ioam-direct-export] IOAM Marking-based Postcard (MBP) [I-D.song-ippm-postcard-based-telemetry], and Hybrid Two-Step (HTS) [I-D.mirsky-ippm-hybrid-two-step] are useful and complementary to the existing active OAM performance monitoring methods, provide promising means to directly monitor the network experience of multicast traffic. However, multicast traffic has some unique characteristics which pose some challenges on efficiently applying such techniques.¶
The IP Multicast (S,G) data is identical from one branch to another on its way to multiple receivers. When adding IOAM trace data to multicast packets, redundant data will be collected for the same original multicast packet. This is because each replicated packet keeps the telemetry data for its entire forwarding path and the replicated packets all share some common path segments. Such redundancy consumes more network bandwidth unnecessarily. Alternatively, it could be more efficient to collect the telemetry data using solutions such as IOAM DEX to eliminate the data redundancy. However, the current postcard-based direct export solution does not have a branch identifier, making telemetry data correlation and multicast-tree reconstruction difficult.¶
This draft proposes a set of solutions to the IOAM data redundancy problem. The requirements for multicast traffic telemetry are discussed along with the issues of the existing on-path telemetry techniques. We propose modifications to make these techniques adapt to multicast in order for the original multicast tree to be correctly reconstructed while eliminating redundant data.¶
Multicast traffic is forwarded through a multicast tree. With PIM and P2MP (MLDP, RSVP-TE) the forwarding tree is established and maintained by the multicast routing protocol. With BIER, no state is created in the network to establish a forwarding tree; instead, a bier header provides the necessary information for each packet to know the egress points. Multicast packets are only replicated at each tree branch node for efficiency.¶
There are several requirements for multicast traffic telemetry, a few of which are:¶
In order to meet these requirements, we need the ability to directly monitor the multicast traffic and derive data from the multicast packets. The conventional OAM mechanisms, such as multicast ping and trace, are not sufficient to meet these requirements.¶
On-path Telemetry techniques that directly retrieve data from multicast traffic's live network experience are ideal to address the above mentioned requirements. The representative techniques include In-situ OAM (IOAM) Trace option [RFC9197], IOAM Direct Export (DEX) option [I-D.ietf-ippm-ioam-direct-export], and IOAM Marking-based Postcard (MBP) [I-D.song-ippm-postcard-based-telemetry]. However, unlike unicast, multicast poses some unique challenges to applying these techniques.¶
Multicast packets are replicated at each branch node in the corresponding multicast tree. Therefore, there are multiple copies of the original multicast packet in the network.¶
If the IOAM trace option is used for on-path data collection, the partial trace data will also be replicated into the copy each branch. The end result is that, at the multicast tree leaves, each copy of the multicast packet has a complete trace. Most of the data, however, is redundant. Data redundancy introduces unnecessary header overhead, wastes network bandwidth, and complicates the data processing. In case the multicast tree is large, and the path is long, the redundancy problem becomes severe.¶
The postcard-based solutions, including the IOAM DEX and MBP, can be used to eliminate such data redundancy, because each node on the tree only sends a postcard covering local data. However, they cannot track the tree branches properly so it can bring confusion about the multicast tree topology. For example, in a multicast tree, Node A has two branches, one to Node B and the other to node C, and Node B leads to Node D and Node C leads to Node E. From the received postcards, one cannot tell whether or not Node D(E) is the next hop of Node B(C).¶
The fundamental reason for this problem is that there is not an identifier (either implicit or explicit) to correlate the data on each branch.¶
We provide two solutions to address the above issues. One is based on IOAM DEX and requires an extension to the instruction header of the IOAM DEX Option. The second solution combines the IOAM trace option and postcards for redundancy removal.¶
One way to mitigate PBT's multiple tree tracking weakness is to augment it with a branch identifier field. Note that this works for the IOAM DEX option but not for MBP because the IOAM DEX option has an instruction header which can be used to hold the branch identifier. To make the branch identifier globally unique, the branch node ID plus an index is used. For example, Node A has two branches, one to Node B and the other to Node C. Node A will use [A, 0] as the branch identifier for the branch to B, and [A, 1] for the branch to C. The identifier is unchanged for each multicast tree instance and carried with the multicast packet until the next branch node. Each postcard needs to include the branch identifier in the export data. The branch identifier, along with the other fields such as flow ID and sequence number, is sufficient for the data analyzer to reconstruct the topology of the multicast tree.¶
Figure 1 shows an example of this solution. "P" stands for the postcard packet. The square brackets contains the branch identifier. The curly brace contains the telemetry data about a specific node.¶
P:[A,0]{A} P:[A,0]{B} P:[B,1]{D} P:[B,0]{C} P:[B,0]{E}
^ ^ ^ ^ ^
: : : : :
: : : : :
: : : +-:-+ +-:-+
: : : | | | |
: : +---:----->| C |------>| E |-...
+-:-+ +-:-+ | : | | | |
| | | |----+ : +---+ +---+
| A |------->| B | :
| | | |--+ +-:-+
+---+ +---+ | | |
+-->| D |--...
| |
+---+
Each branch fork node needs to generate the branch ID for each branch in its multicast tree instance and include it in the IOAM DEX option header so the downstream node can learn it. The branch ID contains two parts: the branch fork node ID and a unique branch index.¶
Conforming to the node ID specification in IOAM [RFC9197], the node ID is a 3-octet unsigned integer. The branch index is a one-octet unsigned integer. So the branch ID is 4-octet long, as shown in Figure 2.¶
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| node_id | branch index |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Figure 3 shows that the branch ID is carried as an optional field after the flow ID and sequence number optional fields in the IOAM DEX option header. A bit "M" (The third bit in the Extension-Flags field) is reserved to indicate the presence of the branch ID field. If "M" is set to 1, the optional multicast branch ID field is present; otherwise it is absent.¶
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Namespace-ID | Flags |F|S|M|Ext-Flags|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| IOAM-Trace-Type | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Flow ID (optional) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Sequence Number (Optional) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Multicast Branch ID (optional) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Once a node gets the branch ID information from the upstream, it MUST carry this information in its telemetry data export postcards, so the original multicast tree can be correctly reconstructed based on the postcards.¶
The second solution is a combination of the IOAM trace option and the postcard-based telemetry. To avoid data redundancy at each branch node, the trace data accumulated, to that point, is exported by a postcard before the packet is replicated. In this case, each branch still needs to maintain some identifier to help correlate the postcards for each tree section. The natural way to accomplish this is to simply carry the branch node's data (including its ID) in the trace of each branch. This is also necessary because each replicated multicast packet can have different telemetry data pertaining to this particular copy (e.g., node delay, egress timestamp, and egress interface). As a consequence, the local data exported by each branch node can only contain partial data (e.g., ingress interface and ingress timestamp).¶
Figure 4 shows an example in a segment of a multicast tree. Node B and D are two branch nodes and they will export a postcard covering the trace data for the previous section. The end node of each path will also need to export the data of the last section as a postcard.¶
P:{A,B'} P:{B1,C,D'}
^ ^
: :
: :
: : {D1}
: : +--...
: +---+ +---+ |
: {B1} | |{B1,C}| |--+ {D2}
: +-->| C |----->| D |-----...
+---+ +---+ | | | | |--+
| | {A} | |--+ +---+ +---+ |
| A |---->| B | +--...
| | | |--+ +---+ {D3}
+---+ +---+ | | |{B2,E}
+-->| E |--...
{B2} | |
+---+
There is no need to modify the IOAM trace option header format as specified in [RFC9197]. We just need to configure the branch nodes to export the postcards and refresh the IOAM header and data (e.g., clear the node data list and reset the Remaining Length filed).¶
MTRACEv2 [RFC8487] provides an active probing approach for the tracing of an IP multicast routing path. Mtrace can also provide information such as the packet rates and losses, as well as other diagnostic information. New on-path telemetry techniques will enhance Mtrace, and other existing OAM solutions, with more granular and realtime network status data through direct measurements. There are various multicast protocols that are used to forward the multicast data. Each will require their own data-plane on-path telemetry method based on the solutions aforementioned.¶
PIM-SM [RFC7761] is the most widely used multicast routing protocol deployed today. Of the various PIM modes (PIM-SM, PIM-DM, BIDIR-PIM, PIM-SSM), PIM-SSM is the preferred method due to its simplicity and removal of network source discovery complexity. With all PIM modes, control plane state is established in the network in order to forward multicast UDP data packets. All PIM modes utilize network based source discovery except for PIM-SSM, which utilizes application based source discovery. IP Multicast packets fall within the range of 224.0.0.0 through 239.255.255.255. The telemetry solution will need to work within this address range and provide telemetry data for this UDP traffic.¶
The proposed solutions for encapsulating the telemetry instruction header and metadata in IPv6 UDP packets is described in [I-D.ietf-ippm-ioam-ipv6-options].¶
Multipoint Label Distribution Protocol (mLDP), P2MP RSVP-TE, Ingress Replication (IR), PIM MDT SAFI with GRE Transport, are commonly used within a Multicast VPN (MVPN) environment utilizing MVPN procedures Multicast in MPLS/BGP IP VPNs [RFC6513] and BGP Encoding and Procedures for Multicast in MPLS/BGP IP VPNs [RFC6514]. MLDP LDP Extension for P2MP and MP2MP LSPs [RFC6388] provides extensions to LDP to establish point-to-multipoint (P2MP) and multipoint-to-multipoint (MP2MP) label switched paths (LSPs) in MPLS networks. P2MP RSVP-TE provides extensions to RSVP-TE RSVP-TE for P2MP LSPs [RFC4875] for establish traffic-engineered P2MP LSPs in MPLS networks. Ingress Replication (IR) P2MP Trees Ingress Replication Tunnels in Multicast VPNs [RFC7988] using unicast replication from parent node to child node over MPLS Unicast Tunnel. PIM MDT SAFI Multicast in BGP/MPLS IP VPNs [RFC6037]utilizes PIM modes PIM-SSM, PIM-SM, PIM-BIDIR control plane with GRE transport data plane in the core for X-PMSI P-Tree using MVPN procedures. Replication SID SR Replication Segment for Multi-point Service Delivery [I-D.ietf-spring-sr-replication-segment] replication segments for P2MP multicast service delivery in Segment Routing SR-MPLS networks. The telemetry solution will need to be able to follow these P2MP and MP2MP paths. The telemetry instruction header and data should be encapsulated into MPLS packets on P2MP and MP2MP paths. A corresponding proposal is described in [I-D.song-mpls-extension-header].¶
BIER [RFC8279] adds a new header to multicast packets and allows the multicast packets to be forwarded according to the header only. By eliminating the requirement of maintaining per multicast group state, BIER is more scalable than the traditional multicast solutions.¶
OAM Requirements for BIER [I-D.ietf-bier-oam-requirements] lists many of the requirements for OAM at the BIER layer which will help in the forming of on-path telemetry requirements as well.¶
There is also current work to provide solutions for BIER forwarding in ipv6 networks. For instance, a solution, BIER in Non-MPLS IPv6 Networks [I-D.xie-bier-ipv6-encapsulation], proposes a new bier Option Type codepoint from the "Destination Options and Hop-by-Hop Options" IPv6 sub-registry. This is similar to what IOAM proposes for IPv6 transport.¶
Depending on how the BIER header is encapsulated into packets with different transport protocols, the method to encapsulate the telemetry instruction header and metadata also varies. It is also possible to make the instruction header and metadata a part of the BIER header itself, such as in a TLV.¶
No new security issues are identified other than those discovered by the IOAM, PBT and HTS drafts.¶
The document requests a new extension flag registration in the "IOAM DEX Extension-Flags" registry, as described in Section 4.1.¶
Bit 2 "Multicast Branch ID [RFC XXXX] [RFC Editor: please replace with the RFC number of the current document]".¶
TBD¶
The authors would like to thank Frank Brockners for the comments and advice.¶