Authentication Failure Reporting using the Abuse Report Format
draft-ietf-marf-authfailure-report-00

Abstract

This memo registers an extension report type to ARF to be used for reporting forensic information about messages that fail one or more message authentication schemes in use by the purported sender of the message.

Status of this Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on December 31, 2011.

Copyright Notice

Copyright (c) 2011 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Table of Contents

• 1. Introduction
• 2. Definitions
• 2.1. Keywords
• 2.2. Imported Definitions
• 3. Extension ARF Fields for Authentication Failure Reporting
• 3.1. New ARF Feedback Type
• 3.2. New ARF Header Field Names
• 3.2.1. Required For All Reports
• 3.2.2. Required For DKIM Reports
• 3.3. Authentication Failure Types
• 4. Syntax For Added ARF Header Fields
• 5. Redacting Data
• 6. IANA Considerations
• 6.1. Updates to ARF Feedback Types
• 6.2. Updates to ARF Header Field Names
• 7. Security Considerations
• 7.1. Inherited Considerations
• 7.2. Forgeries
• 7.3. Automatic Generation
• 7.4. Envelope Sender Selection
• 7.5. Reporting Multiple Incidents
• 8. References
• 8.1. Normative References
• 8.2. Informative References
• Appendix A. Acknowledgements
• Appendix B. Examples
• Appendix B.1. Example Use of ARF Extension Headers
• Author's Address

1. Introduction

[ARF] defines a message format for sending reports of abuse in the messaging infrastructure, with an eye toward automating both the generating and consumption of those reports. This memo presents extensions to the Abuse Reporting Format (ARF) to allow for detailed reporting of message authentication failures.

2. Definitions

2.1. Keywords

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [KEYWORDS].

2.2. Imported Definitions

The ABNF token "qp-section" is imported from [MIME].

base64 is defined in [MIME].

3. Extension ARF Fields for Authentication Failure Reporting

The current report format defined in [ARF] lacks some specific features required to do effective sender authentication reporting. This section defines extensions to ARF to accommodate this requirement.

3.1. New ARF Feedback Type

A new feedback type of "auth-failure" is defined as an extension to Section 8.2 of [ARF]. See Section 3.3 for details.

A message that uses this feedback type has the following modified header field requirements for the second (machine-parseable) MIME part of the report:

Authentication-Results:

This field MUST be formatted as defined in [AUTH-RESULTS], except that it MUST include explicit results for both DKIM and SPF even if those tests were not actually performed. This field MUST appear at least once, and it is RECOMMENDED that the corresponding header fields be copied directly from the message about which a report is being generated.

Original-Envelope-Id:

As specified in [ARF]. This field MUST appear exactly once.

Original-Mail-From:

As specified in [ARF]. This field MUST appear exactly once.

Arrival-Date:

As specified in [ARF]. This field MUST appear exactly once.

Source-IP:

As specified in [ARF]. This field MUST appear exactly once. If this information is either not available at the time the report is generated, or the generating ADMD's policy requires it be redacted, a value of 0.0.0.0 MUST be used.

Message-ID:

As specified in [ARF]. This field MUST appear exactly once.

Reported-Domain:

As specified in [ARF]. This field MUST appear exactly once.

Delivery-Result:

As specified in Section 3.2.1. This field MUST appear exactly once.

The third MIME part of the message is either of type "message/rfc822" (as defined in [MIME-TYPES]) or "text/rfc822-headers" (as defined in [REPORT]) and contains a copy of the entire header block from the original message. This part MUST be included (contrary to [REPORT]).

For privacy reasons, report generators might need to redact portions of a reported message such as the end user whose complaint action resulted in the report. See Section 5 for a discussion of this.

3.2. New ARF Header Field Names

The following new ARF field names are defined as extensions to Section 6.2 of [ARF].

The values that are base64 encodings may contain FWS for formatting purposes as per the usual header field wrapping defined in [MAIL]. During decoding, any characters not in the base64 alphabet are ignored so that such line wrapping does not harm the value. The ABNF token "FWS" is defined in [DKIM].

3.2.1. Required For All Reports

Auth-Failure:

Indicates the type of authentication failure that is being reported. The list of valid values is enumerated below.

Delivery-Result:

The final message disposition that was enacted by the ADMD generating the report. Possible values are:

inbox:

The message was delivered to the intended inbox.

spam:

The message was delivered to the recipient's spam folder (or equivalent).

policy:

The message was not delivered to the intended inbox due to authentication failure. The specific action taken is not specified.

reject:

The message was rejected.

other:

The message had a final disposition not covered by one of the above values.

3.2.2. Required For DKIM Reports

DKIM-Canonicalized-Header:

A base64 encoding of the canonicalized header of the message as generated by the verifier.

DKIM-Domain:

The domain that signed the message, taken from the "d=" tag of the signature.

DKIM-Identity:

The identity of the signature that failed verification, taken from the "i=" tag of the signature.

DKIM-Selector:

The selector of the signature that failed verification, taken from the "s=" tag of the signature.

3.3. Authentication Failure Types

The list of defined authentication failure types, used in the "Auth-Failure:" header (defined above), is as follows:

adsp:

The message did not conform to the sender's published [ADSP] signing practises. The DKIM-ADSP-DNS field MUST be included in the report.

bodyhash:

The body hash in the signature and the body hash computed by the verifier did not match. The DKIM-Canonicalized-Body field SHOULD be included in the report.

granularity:

The DKIM key referenced by the signature on the message was not authorized for use by the sender. The DKIM-Domain and DKIM-Selector fields MUST be included in the report, and the DKIM-Identity field SHOULD be included.

revoked:

The DKIM key referenced by the signature on the message has been revoked. The DKIM-Domain and DKIM-Selector fields MUST be included in the report.

signature:

The DKIM signature on the message did not successfully verify against the header hash and public key. The DKIM-Domain, DKIM-Selector and DKIM-Canonicalized-Header fields MUST be included in the report.

spf:

The evaluation of the sending domain's SPF record produced a "fail" or "softfail" result.

Supplementary data MAY be included in the form of [MAIL]-compliant comments. For example, "Auth-Failure: adsp" could be augmented by a comment to indicate that the failed message was rejected because it was not signed when it should have been. See Appendix Appendix B for examples.

4. Syntax For Added ARF Header Fields

The ABNF definitions for the new fields are as follows:

    auth-failure = "Auth-Failure:" [CFWS] token [CFWS] CRLF
      ; "token" must be a registered authentication failure type
      ; as specified elsewhere in this memo

    delivery-result = "Delivery-Result:" [CFWS]
                      ( "inbox" / "spam" / "policy" /
                        "reject" / "other" ) [CFWS] CRLF

    dkim-header = "DKIM-Canonicalized-Header:" [CFWS]
                  base64string CRLF
      ; "base64string" is imported from [DKIM]

    dkim-domain = "DKIM-Domain:" [CFWS] domain [CFWS] CRLF

    dkim-identity = "DKIM-Identity:" [CFWS] [ local-part ] "@"
                    domain-name [CFWS] CRLF
      ; "local-part" is imported from [MAIL]

    dkim-selector = "DKIM-Selector:" [CFWS] token [CFWS] CRLF

    dkim-adsp-dns = "DKIM-ADSP-DNS:" [CFWS]
                    quoted-string [CFWS] CRLF
      ; "quoted-string" is imported from [MAIL]

    dkim-body = "DKIM-Canonicalized-Body:" [CFWS]
                base64string CRLF

    dkim-selector-dns = "DKIM-Selector-DNS:" [CFWS]
                        quoted-string [CFWS] CRLF

    spf-dns = "SPF-DNS:" [CFWS] quoted-string [CFWS] CRLF
		

5. Redacting Data

For privacy considerations it might be the policy of a report generator to redact, or obscure, portions of the report that might identify an end user that caused the report to be generated. Precisely how this is done is unspecified in [ARF] as it will generally be a matter of local policy. That specification does admonish generators against being overly zealous with this practice, as obscuring too much data makes the report inactionable.

Previous redaction practices, such as replacing local-parts of addresses with a uniform string like "xxxxxxxx", often frustrated any kind of prioritizing or grouping of reports.

Generally, it is assumed that the recipient fields of a message (i.e. those containing recipient addresses), when copied into a report, are to be obscured to protect the identify of an end user that submitted a complaint about a message. However, it is also presumed that other data will be left intact, data that could be correlated against logs to determine the source of the message that drew a complaint.

See [I-D.IETF-MARF-REDACTION] for further details.

6. IANA Considerations

As required by [IANA-CONSIDERATIONS], this section contains registry information for the new tag, and the extension to [ARF].

6.1. Updates to ARF Feedback Types

The following feedback type is added to the Feedback Report Feedback Type Registry:

    Feedback Type: auth-failure
    Description: sender authentication failure report
    Registration: (this document)
			

6.2. Updates to ARF Header Field Names

The following headers are added to the Feedback Report Header Names Registry:

    Field Name: Auth-Failure
    Description: Type of authentication failure
    Multiple Appearances: No
    Related "Feedback-Type": auth-failure
			

    Field Name: Delivery-Result
    Description: Final disposition of the subject message
    Multiple Appearances: No
    Related "Feedback-Type": auth-failure
			

    Field Name: DKIM-ADSP-DNS
    Description: Retrieved DKIM ADSP record
    Multiple Appearances: No
    Related "Feedback-Type": auth-failure
			

    Field Name: DKIM-Canonicalized-Body
    Description: Canonicalized body, per DKIM
    Multiple Appearances: No
    Related "Feedback-Type": auth-failure
			

    Field Name: DKIM-Canonicalized-Header
    Description: Canonicalized header, per DKIM
    Multiple Appearances: No
    Related "Feedback-Type": auth-failure
			

    Field Name: DKIM-Domain
    Description: DKIM signing domain from "d=" tag
    Multiple Appearances: No
    Related "Feedback-Type": auth-failure
			

    Field Name: DKIM-Identity
    Description: Identity from DKIM signature
    Multiple Appearances: No
    Related "Feedback-Type": auth-failure
			

    Field Name: DKIM-Selector
    Description: Selector from DKIM signature
    Multiple Appearances: No
    Related "Feedback-Type": auth-failure
			

    Field Name: DKIM-Selector-DNS
    Description: Retrieved DKIM key record
    Multiple Appearances: No
    Related "Feedback-Type": auth-failure
			

    Field Name: SPF-DNS
    Description: Retrieved SPF record
    Multiple Appearances: No
    Related "Feedback-Type": auth-failure
			

7. Security Considerations

Security issues with respect to these reports are similar to those found in [DSN].

7.1. Inherited Considerations

Implementors are advised to consider the Security Considerations sections of [DKIM], [ADSP] [SPF] and [ARF].

7.2. Forgeries

These reports may be forged as easily as ordinary Internet electronic mail. User agents and automatic mail handling facilities (such as mail distribution list exploders) that wish to make automatic use of DSNs of any kind should take appropriate precautions to minimize the potential damage from denial-of-service attacks.

Security threats related to forged DSNs include the sending of:

1. A falsified authentication failure notification when the message was in fact delivered to the indicated recipient;
2. Falsified signature information, such as selector, domain, etc.

Perhaps the simplest means of mitigating this threat is to assert that these reports should themselves be signed with something like DKIM. On the other hand, if there's a problem with the DKIM infrastructure at the verifier, signing DKIM failure reports may produce reports that aren't trusted or even accepted by their intended recipients.

7.3. Automatic Generation

Automatic generation of these reports by verifying agents can cause a denial-of-service attack when a large volume of e-mail is sent that causes sender authentication failures for whatever reason.

Limiting the rate of generation of these messages may be appropriate but threatens to inhibit the distribution of important and possibly time-sensitive information.

In general ARF feedback loop terms, it is suggested that report generators only create these (or any) ARF reports after an out-of-band arrangement has been made between two parties. This mechanism then becomes a way to adjust parameters of an authorized abuse report feedback loop that is configured and activated by private agreement rather than starting to send them automatically based solely on discovered data in the DNS.

7.4. Envelope Sender Selection

In the case of transmitted reports in the form of a new message, it is necessary to construct the message so as to avoid amplification attacks, deliberate or otherwise. Thus, per Section 2 of [DSN], the envelope sender address of the report SHOULD be chosen to ensure that no delivery status reports will be issued in response to the report itself, and MUST be chosen so that these reports will not generate mail loops. Whenever an [SMTP] transaction is used to send a report, the MAIL FROM command MUST use a NULL return address, i.e. "MAIL FROM:<>".

7.5. Reporting Multiple Incidents

If it is known that a particular host generates abuse reports upon certain incidents, an attacker could forge a high volume of messages that will trigger such a report. The recipient of the report could then be innundated with reports. This could easily be extended to a distributed denial-of-service attack by finding a number of report-generating servers.

The incident count referenced in [ARF] provides a limited form of mitigation. The host generating reports may elect to send reports only periodically, with each report representing a number of identical or near-identical incidents. One might even do something inverse-exponentially, sending reports for each of the first ten incidents, then every tenth incident up to 100, then every 100th incident up to 1000, etc. until some period of relative quiet after which the limitation resets.

The use of this for "near-identical" incidents in particular causes a degradation in reporting quality, however. If for example a large number of pieces of spam arrive from one attacker, a reporting agent may decide only to send a report about a fraction of those messages. While this averts a flood of reports to a system administrator, the precise details of each incident are similarly not sent.

8. References

8.1. Normative References

8.2. Informative References

Appendix A. Acknowledgements

The authors wish to acknowledge the following for their review and constructive criticism of this proposal: Mike Markley, Kelly Wanser and Murray Kucherawy.

Appendix B. Examples

This section contains examples of the use of each the extension defined by this memo.

Appendix B.1. Example Use of ARF Extension Headers

An ARF-formatted report using some of the proposed ARF extension fields:

    From: arf-daemon@example.com
    To: recipient@example.net
    Subject: This is a test
    Date: Wed, 14 Apr 2010 12:17:45 -0700 (PDT)
    MIME-Version: 1.0
    Content-Type: multipart/report; report-type=feedback-report;
        boundary="part1_13d.2e68ed54_boundary"

    --part1_13d.2e68ed54_boundary
    Content-Type: text/plain; charset="US-ASCII"
    Content-Transfer-Encoding: 7bit

    This is an email abuse report for an email message received
    from IP 192.0.2.1 on Wed, 14 Apr 2010 12:15:31 PDT. For more
    information about this format please see
    http://www.mipassoc.org/arf/.

    --part1_13d.2e68ed54_boundary
    Content-Type: message/feedback-report

    Feedback-Type: auth-failure
    User-Agent: SomeDKIMFilter/1.0
    Version: 1.0
    Original-Mail-From: <randomuser@example.net>
    Original-Rcpt-To: <user@example.com>
    Received-Date: Wed, 14 Apr 2010 12:15:31 -0700 (PDT)
    Source-IP: 192.0.2.1
    Authentication-Results: mail.example.com; dkim=fail
        header.d=example.net
    Reported-Domain: example.net
    DKIM-Domain: example.net
    DKIM-Failure: bodyhash

    --part1_13d.2e68ed54_boundary
    Content-Type: message/rfc822

    DKIM-Signature: v=1; c=relaxed/simple; a=rsa-sha256;
        s=testkey; d=example.net; h=From:To:Subject:Date;
        bh=2jUSOH9NhtVGCQWNr9BrIAPreKQjO6Sn7XIkfJVOzv8=;
        b=AuUoFEfDxTDkHlLXSZEpZj79LICEps6eda7W3deTVFOk4yAUoqOB
         4nujc7YopdG5dWLSdNg6xNAZpOPr+kHxt1IrE+NahM6L/LbvaHut
         KVdkLLkpVaVVQPzeRDI009SO2Il5Lu7rDNH6mZckBdrIx0orEtZV
         4bmp/YzhwvcubU4=
    Received: from smtp-out.example.net by mail.example.com
        with SMTP id o3F52gxO029144;
        Wed, 14 Apr 2010 12:15:31 -0700 (PDT)
    Received: from internal-client-001.example.com
        by mail.example.com
        with SMTP id o3F3BwdY028431;
        Wed, 14 Apr 2010 12:12:09 -0700 (PDT)
    From: randomuser@example.net
    To: user@example.com
    Date: Wed, 14 Apr 2010 12:12:09 -0700 (PDT)
    Subject: This is a test

    Hi, just making sure DKIM is working!

    --part1_13d.2e68ed54_boundary--
				

Example 3: Example ARF report using these extensions

This example ARF message is making the following assertion:

• DKIM verification of the signature added within "example.net" failed when it was processed on arrival at "mail.example.com".
• The cause for the verification failure was a mismatch between the body contents observed at the verifier and the body hash contained in the signature.

Author's Address