Internet X.509 Public Key Infrastructure - Algorithm Identifiers for Kyber

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶

This Internet-Draft will expire on 29 September 2023.¶

Copyright Notice

Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶

Table of Contents

1. Introduction

Kyber is a key-encapsulation mechanism (KEM) standardized by the US NIST PQC Project [PQCProj]. This document specifies the use of the Kyber algorithm at three security levels: Kyber512, Kyber768, and Kyber1024, in X.509 public key certificates; see [RFC5280]. Public and private key encodings are also specified.¶

2. Conventions and Definitions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶

3. Algorithm Identifiers

Certificates conforming to [RFC5280] can convey a public key for any public key algorithm. The certificate indicates the algorithm through an algorithm identifier. An algorithm identifier consists of an object identifier and optional parameters.¶

The AlgorithmIdentifier type, which is included herein for convenience, is defined as follows:¶

  AlgorithmIdentifier{ALGORITHM-TYPE, ALGORITHM-TYPE:AlgorithmSet} ::=
    SEQUENCE {
      algorithm   ALGORITHM-TYPE.&id({AlgorithmSet}),
      parameters  ALGORITHM-TYPE.
                    &Params({AlgorithmSet}{@algorithm}) OPTIONAL
    }

The fields in AlgorithmIdentifier have the following meanings:¶

• algorithm identifies the cryptographic algorithm with an object identifier.¶
• parameters, which are optional, are the associated parameters for the algorithm identifier in the algorithm field.¶

Section 4 includes object identifiers for Kyber-512, Kyber-768, and Kyber-1024. For all of these OIDs, the parameters MUST be absent.¶

4. Kyber Public Key Identifiers

The AlgorithmIdentifier for a Kyber public key MUST use one of the id-alg-kyber object identifiers listed below, based on the security level. The parameters field of the AlgorithmIdentifier for the Kyber public key MUST be absent.¶

When any of the Kyber AlgorithmIdentifier appears in the SubjectPublicKeyInfo field of an X.509 certificate, the key usage certificate extension MUST only contain keyEncipherment Section 4.2.1.3 of [RFC5280].¶

  pk-kyber-512 PUBLIC-KEY ::= {
    IDENTIFIER id-alg-kyber-512
    -- KEY no ASN.1 wrapping --
    PARAMS ARE absent
    CERT-KEY-USAGE
      { keyEncipherment }
    --- PRIVATE-KEY no ASN.1 wrapping --
    }

  pk-kyber-768 PUBLIC-KEY ::= {
    IDENTIFIER id-alg-kyber-768
    -- KEY no ASN.1 wrapping --
    PARAMS ARE absent
    CERT-KEY-USAGE
      { keyEncipherment }
    --- PRIVATE-KEY no ASN.1 wrapping --
    }

  pk-kyber-1024 PUBLIC-KEY ::= {
    IDENTIFIER id-alg-kyber-1024
    -- KEY no ASN.1 wrapping --
    PARAMS ARE absent
    CERT-KEY-USAGE
      { keyEncipherment }
    --- PRIVATE-KEY no ASN.1 wrapping --
    }

5. Subject Public Key Fields

In the X.509 certificate, the subjectPublicKeyInfo field has the SubjectPublicKeyInfo type, which has the following ASN.1 syntax:¶

  SubjectPublicKeyInfo {PUBLIC-KEY: IOSet} ::= SEQUENCE {
      algorithm        AlgorithmIdentifier {PUBLIC-KEY, {IOSet}},
      subjectPublicKey BIT STRING
  }

The fields in SubjectPublicKeyInfo have the following meaning:¶

• algorithm is the algorithm identifier and parameters for the public key (see above).¶
• subjectPublicKey contains the byte stream of the public key. The algorithms defined in this document always encode the public key as TODO pick format e.g., exact multiple of 8 bits?.¶

The following is an example of a Kyber-512 public key encoded using the textual encoding defined in [RFC7468]:¶

  -----BEGIN PUBLIC KEY-----
  TODO insert example public key
  -----END PUBLIC KEY-------

6. Private Key Format

"Asymmetric Key Packages" [RFC5958] describes how to encode a private key in a structure that both identifies what algorithm the private key is for and allows for the public key and additional attributes about the key to be included as well. For illustration, the ASN.1 structure OneAsymmetricKey is replicated below. The algorithm-specific details of how a private key is encoded are left for the document describing the algorithm itself.¶

  OneAsymmetricKey ::= SEQUENCE {
    version                  Version,
    privateKeyAlgorithm      SEQUENCE {
    algorithm                PUBLIC-KEY.&id({PublicKeySet}),
    parameters               PUBLIC-KEY.&Params({PublicKeySet}
                               {@privateKeyAlgorithm.algorithm})
                                  OPTIONAL}
    privateKey               OCTET STRING (CONTAINING
                               PUBLIC-KEY.&PrivateKey({PublicKeySet}
                                 {@privateKeyAlgorithm.algorithm})),
    attributes           [0] Attributes OPTIONAL,
    ...,
    [[2: publicKey       [1] BIT STRING (CONTAINING
                               PUBLIC-KEY.&Params({PublicKeySet}
                                 {@privateKeyAlgorithm.algorithm})
                                 OPTIONAL,
    ...
  }

  PrivateKey ::= OCTET STRING

  PublicKey ::= BIT STRING

For the keys defined in this document, the private key is always an opaque byte sequence. The ASN.1 type PqckemPrivateKey is defined in this document to hold the byte sequence. Thus, when encoding a OneAsymmetricKey object, the private key is wrapped in a PqckemPrivateKey object and wrapped by the OCTET STRING of the "privateKey" field.¶

  PqckemPrivateKey ::= OCTET STRING

The following is an example of a Kyber-512 private key encoded using the textual encoding defined in [RFC7468]:¶

  -----BEGIN PRIVATE KEY-----
  TODO iser example private key
  -----END PRIVATE KEY-------

The following example, in addition to encoding the Kyber-512 private key, has an attribute included as well as the public key. As with the prior example, the textual encoding defined in [RFC7468] is used:¶

  -----BEGIN PRIVATE KEY-----
  TODO insert example private key with attribute
  -----END PRIVATE KEY-------

7. ASN.1 Module

TODO ASN.1 Module¶

8. Security Considerations

The Security Considerations section of [RFC5280] applies to this specification as well.¶

[EDNOTE: Discuss side-channels for Kyber TBD1.]¶

9. IANA Considerations

This document will have some IANA actions.¶

Acknowledgments

TODO acknowledge.¶

Authors' Addresses