HTTP/1.1 Messaging

1.1. Requirements Notation

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶

Conformance criteria and considerations regarding error handling are defined in Section 3 of [Semantics].¶

1.2. Syntax Notation

This specification uses the Augmented Backus-Naur Form (ABNF) notation of [RFC5234], extended with the notation for case-sensitivity in strings defined in [RFC7405].¶

It also uses a list extension, defined in Section 5.5 of [Semantics], that allows for compact definition of comma-separated lists using a '#' operator (similar to how the '*' operator indicates repetition). Appendix A shows the collected grammar with all list operators expanded to standard ABNF notation.¶

As a convention, ABNF rule names prefixed with "obs-" denote "obsolete" grammar rules that appear for historical reasons.¶

  BWS           = <BWS, see [Semantics], Section 1.6.1>
  OWS           = <OWS, see [Semantics], Section 1.6.1>
  RWS           = <RWS, see [Semantics], Section 1.6.1>
  absolute-URI  = <absolute-URI, see [RFC3986], Section 4.3>
  absolute-path = <absolute-path, see [Semantics], Section 2.4>
  authority     = <authority, see [RFC3986], Section 3.2>
  comment       = <comment, see [Semantics], Section 5.4.1.3>
  field-name    = <field-name, see [Semantics], Section 5.3>
  field-value   = <field-value, see [Semantics], Section 5.4>
  obs-text      = <obs-text, see [Semantics], Section 5.4.1.2>
  port          = <port, see [RFC3986], Section 3.2.3>
  query         = <query, see [RFC3986], Section 3.4>
  quoted-string = <quoted-string, see [Semantics], Section 5.4.1.2>
  token         = <token, see [Semantics], Section 5.4.1.1>
  uri-host      = <host, see [RFC3986], Section 3.2.2>

2.1. Message Format

An HTTP/1.1 message consists of a start-line followed by a CRLF and a sequence of octets in a format similar to the Internet Message Format [RFC5322]: zero or more header field lines (collectively referred to as the "headers" or the "header section"), an empty line indicating the end of the header section, and an optional message body.¶

  HTTP-message   = start-line CRLF
                   *( field-line CRLF )
                   CRLF
                   [ message-body ]

A message can be either a request from client to server or a response from server to client. Syntactically, the two types of message differ only in the start-line, which is either a request-line (for requests) or a status-line (for responses), and in the algorithm for determining the length of the message body (Section 6).¶

  start-line     = request-line / status-line

In theory, a client could receive requests and a server could receive responses, distinguishing them by their different start-line formats. In practice, servers are implemented to only expect a request (a response is interpreted as an unknown or invalid request method) and clients are implemented to only expect a response.¶

Although HTTP makes use of some protocol elements similar to the Multipurpose Internet Mail Extensions (MIME) [RFC2045], see Appendix B for the differences between HTTP and MIME messages.¶

2.2. Message Parsing

The normal procedure for parsing an HTTP message is to read the start-line into a structure, read each header field line into a hash table by field name until the empty line, and then use the parsed data to determine if a message body is expected. If a message body has been indicated, then it is read as a stream until an amount of octets equal to the message body length is read or the connection is closed.¶

A recipient MUST parse an HTTP message as a sequence of octets in an encoding that is a superset of US-ASCII [USASCII]. Parsing an HTTP message as a stream of Unicode characters, without regard for the specific encoding, creates security vulnerabilities due to the varying ways that string processing libraries handle invalid multibyte character sequences that contain the octet LF (%x0A). String-based parsers can only be safely used within protocol elements after the element has been extracted from the message, such as within a header field line value after message parsing has delineated the individual field lines.¶

Although the line terminator for the start-line and header fields is the sequence CRLF, a recipient MAY recognize a single LF as a line terminator and ignore any preceding CR.¶

A sender MUST NOT generate a bare CR (a CR character not immediately followed by LF) within any protocol elements other than the payload body. A recipient of such a bare CR MUST consider that element to be invalid or replace each bare CR with SP before processing the element or forwarding the message.¶

Older HTTP/1.0 user agent implementations might send an extra CRLF after a POST request as a workaround for some early server applications that failed to read message body content that was not terminated by a line-ending. An HTTP/1.1 user agent MUST NOT preface or follow a request with an extra CRLF. If terminating the request message body with a line-ending is desired, then the user agent MUST count the terminating CRLF octets as part of the message body length.¶

In the interest of robustness, a server that is expecting to receive and parse a request-line SHOULD ignore at least one empty line (CRLF) received prior to the request-line.¶

A sender MUST NOT send whitespace between the start-line and the first header field. A recipient that receives whitespace between the start-line and the first header field MUST either reject the message as invalid or consume each whitespace-preceded line without further processing of it (i.e., ignore the entire line, along with any subsequent lines preceded by whitespace, until a properly formed header field is received or the header section is terminated).¶

The presence of such whitespace in a request might be an attempt to trick a server into ignoring that field line or processing the line after it as a new request, either of which might result in a security vulnerability if other implementations within the request chain interpret the same message differently. Likewise, the presence of such whitespace in a response might be ignored by some clients or cause others to cease parsing.¶

When a server listening only for HTTP request messages, or processing what appears from the start-line to be an HTTP request message, receives a sequence of octets that does not match the HTTP-message grammar aside from the robustness exceptions listed above, the server SHOULD respond with a 400 (Bad Request) response.¶

2.3. HTTP Version

HTTP uses a "<major>.<minor>" numbering scheme to indicate versions of the protocol. This specification defines version "1.1". Section 4.2 of [Semantics] specifies the semantics of HTTP version numbers.¶

The version of an HTTP/1.x message is indicated by an HTTP-version field in the start-line. HTTP-version is case-sensitive.¶

  HTTP-version  = HTTP-name "/" DIGIT "." DIGIT
  HTTP-name     = %s"HTTP"

When an HTTP/1.1 message is sent to an HTTP/1.0 recipient [RFC1945] or a recipient whose version is unknown, the HTTP/1.1 message is constructed such that it can be interpreted as a valid HTTP/1.0 message if all of the newer features are ignored. This specification places recipient-version requirements on some new features so that a conformant sender will only use compatible features until it has determined, through configuration or the receipt of a message, that the recipient supports HTTP/1.1.¶

Intermediaries that process HTTP messages (i.e., all intermediaries other than those acting as tunnels) MUST send their own HTTP-version in forwarded messages. In other words, they are not allowed to blindly forward the start-line without ensuring that the protocol version in that message matches a version to which that intermediary is conformant for both the receiving and sending of messages. Forwarding an HTTP message without rewriting the HTTP-version might result in communication errors when downstream recipients use the message sender's version to determine what features are safe to use for later communication with that sender.¶

A server MAY send an HTTP/1.0 response to an HTTP/1.1 request if it is known or suspected that the client incorrectly implements the HTTP specification and is incapable of correctly processing later version responses, such as when a client fails to parse the version number correctly or when an intermediary is known to blindly forward the HTTP-version even when it doesn't conform to the given minor version of the protocol. Such protocol downgrades SHOULD NOT be performed unless triggered by specific client attributes, such as when one or more of the request header fields (e.g., User-Agent) uniquely match the values sent by a client known to be in error.¶

3.1. Method

The method token indicates the request method to be performed on the target resource. The request method is case-sensitive.¶

  method         = token

The request methods defined by this specification can be found in Section 8 of [Semantics], along with information regarding the HTTP method registry and considerations for defining new methods.¶

3.2. Request Target

The request-target identifies the target resource upon which to apply the request. The client derives a request-target from its desired target URI. There are four distinct formats for the request-target, depending on both the method being requested and whether the request is to a proxy.¶

  request-target = origin-form
                 / absolute-form
                 / authority-form
                 / asterisk-form

No whitespace is allowed in the request-target. Unfortunately, some user agents fail to properly encode or exclude whitespace found in hypertext references, resulting in those disallowed characters being sent as the request-target in a malformed request-line.¶

Recipients of an invalid request-line SHOULD respond with either a 400 (Bad Request) error or a 301 (Moved Permanently) redirect with the request-target properly encoded. A recipient SHOULD NOT attempt to autocorrect and then process the request without a redirect, since the invalid request-line might be deliberately crafted to bypass security filters along the request chain.¶

A client MUST send a Host header field in all HTTP/1.1 request messages. If the target URI includes an authority component, then a client MUST send a field value for Host that is identical to that authority component, excluding any userinfo subcomponent and its "@" delimiter (Section 2.5.1 of [Semantics]). If the authority component is missing or undefined for the target URI, then a client MUST send a Host header field with an empty field value.¶

A server MUST respond with a 400 (Bad Request) status code to any HTTP/1.1 request message that lacks a Host header field and to any request message that contains more than one Host header field or a Host header field with an invalid field value.¶

  origin-form    = absolute-path [ "?" query ]

  http://www.example.org/where?q=now

  GET /where?q=now HTTP/1.1
  Host: www.example.org

  absolute-form  = absolute-URI

  GET http://www.example.org/pub/WWW/TheProject.html HTTP/1.1

  authority-form = authority

  CONNECT www.example.com:80 HTTP/1.1

  asterisk-form  = "*"

  OPTIONS * HTTP/1.1

  OPTIONS http://www.example.org:8001 HTTP/1.1

  OPTIONS * HTTP/1.1
  Host: www.example.org:8001

3.3. Reconstructing the Target URI

Since the request-target often contains only part of the user agent's target URI, a server constructs its value to properly service the request (Section 6.1 of [Semantics]).¶

If the request-target is in absolute-form, the target URI is the same as the request-target. Otherwise, the target URI is constructed as follows:¶

• If the server's configuration (or outbound gateway) provides a fixed URI scheme, that scheme is used for the target URI. Otherwise, if the request is received over a secured connection, the target URI's scheme is "https"; if not, the scheme is "http".¶
• If the server's configuration (or outbound gateway) provides a fixed URI authority component, that authority is used for the target URI. If not, then if the request-target is in authority-form, the target URI's authority component is the same as the request-target. If not, then if a Host header field is supplied with a non-empty field-value, the authority component is the same as the Host field-value. Otherwise, the authority component is assigned the default name configured for the server and, if the connection's incoming TCP port number differs from the default port for the target URI's scheme, then a colon (":") and the incoming port number (in decimal form) are appended to the authority component.¶
• If the request-target is in authority-form or asterisk-form, the target URI's combined path and query component is empty. Otherwise, the combined path and query component is the same as the request-target.¶
• The components of the target URI, once determined as above, can be combined into absolute-URI form by concatenating the scheme, "://", authority, and combined path and query component.¶

Example 1: the following message received over an insecure TCP connection¶

  GET /pub/WWW/TheProject.html HTTP/1.1
  Host: www.example.org:8080

has a target URI of¶

  http://www.example.org:8080/pub/WWW/TheProject.html

Example 2: the following message received over a secured connection¶

  OPTIONS * HTTP/1.1
  Host: www.example.org

has a target URI of¶

  https://www.example.org

Recipients of an HTTP/1.0 request that lacks a Host header field might need to use heuristics (e.g., examination of the URI path for something unique to a particular host) in order to guess the target URI's authority component.¶

5.1. Field Line Parsing

Messages are parsed using a generic algorithm, independent of the individual field names. The contents within a given field line value are not parsed until a later stage of message interpretation (usually after the message's entire header section has been processed).¶

No whitespace is allowed between the field name and colon. In the past, differences in the handling of such whitespace have led to security vulnerabilities in request routing and response handling. A server MUST reject any received request message that contains whitespace between a header field name and colon with a response status code of 400 (Bad Request). A proxy MUST remove any such whitespace from a response message before forwarding the message downstream.¶

A field line value might be preceded and/or followed by optional whitespace (OWS); a single SP preceding the field line value is preferred for consistent readability by humans. The field line value does not include any leading or trailing whitespace: OWS occurring before the first non-whitespace octet of the field line value or after the last non-whitespace octet of the field line value ought to be excluded by parsers when extracting the field line value from a header field line.¶

5.2. Obsolete Line Folding

Historically, HTTP header field line values could be extended over multiple lines by preceding each extra line with at least one space or horizontal tab (obs-fold). This specification deprecates such line folding except within the message/http media type (Section 10.1).¶

  obs-fold     = OWS CRLF RWS
               ; obsolete line folding

A sender MUST NOT generate a message that includes line folding (i.e., that has any field line value that contains a match to the obs-fold rule) unless the message is intended for packaging within the message/http media type.¶

A server that receives an obs-fold in a request message that is not within a message/http container MUST either reject the message by sending a 400 (Bad Request), preferably with a representation explaining that obsolete line folding is unacceptable, or replace each received obs-fold with one or more SP octets prior to interpreting the field value or forwarding the message downstream.¶

A proxy or gateway that receives an obs-fold in a response message that is not within a message/http container MUST either discard the message and replace it with a 502 (Bad Gateway) response, preferably with a representation explaining that unacceptable line folding was received, or replace each received obs-fold with one or more SP octets prior to interpreting the field value or forwarding the message downstream.¶

A user agent that receives an obs-fold in a response message that is not within a message/http container MUST replace each received obs-fold with one or more SP octets prior to interpreting the field value.¶

6.1. Transfer-Encoding

The Transfer-Encoding header field lists the transfer coding names corresponding to the sequence of transfer codings that have been (or will be) applied to the payload body in order to form the message body. Transfer codings are defined in Section 7.¶

  Transfer-Encoding = #transfer-coding

Transfer-Encoding is analogous to the Content-Transfer-Encoding field of MIME, which was designed to enable safe transport of binary data over a 7-bit transport service ([RFC2045], Section 6). However, safe transport has a different focus for an 8bit-clean transfer protocol. In HTTP's case, Transfer-Encoding is primarily intended to accurately delimit a dynamically generated payload and to distinguish payload encodings that are only applied for transport efficiency or security from those that are characteristics of the selected resource.¶

A recipient MUST be able to parse the chunked transfer coding (Section 7.1) because it plays a crucial role in framing messages when the payload body size is not known in advance. A sender MUST NOT apply chunked more than once to a message body (i.e., chunking an already chunked message is not allowed). If any transfer coding other than chunked is applied to a request payload body, the sender MUST apply chunked as the final transfer coding to ensure that the message is properly framed. If any transfer coding other than chunked is applied to a response payload body, the sender MUST either apply chunked as the final transfer coding or terminate the message by closing the connection.¶

For example,¶

  Transfer-Encoding: gzip, chunked

indicates that the payload body has been compressed using the gzip coding and then chunked using the chunked coding while forming the message body.¶

Unlike Content-Encoding (Section 7.1.2 of [Semantics]), Transfer-Encoding is a property of the message, not of the representation, and any recipient along the request/response chain MAY decode the received transfer coding(s) or apply additional transfer coding(s) to the message body, assuming that corresponding changes are made to the Transfer-Encoding field value. Additional information about the encoding parameters can be provided by other header fields not defined by this specification.¶

Transfer-Encoding MAY be sent in a response to a HEAD request or in a 304 (Not Modified) response (Section 10.4.5 of [Semantics]) to a GET request, neither of which includes a message body, to indicate that the origin server would have applied a transfer coding to the message body if the request had been an unconditional GET. This indication is not required, however, because any recipient on the response chain (including the origin server) can remove transfer codings when they are not needed.¶

A server MUST NOT send a Transfer-Encoding header field in any response with a status code of 1xx (Informational) or 204 (No Content). A server MUST NOT send a Transfer-Encoding header field in any 2xx (Successful) response to a CONNECT request (Section 8.3.6 of [Semantics]).¶

Transfer-Encoding was added in HTTP/1.1. It is generally assumed that implementations advertising only HTTP/1.0 support will not understand how to process a transfer-encoded payload. A client MUST NOT send a request containing Transfer-Encoding unless it knows the server will handle HTTP/1.1 requests (or later minor revisions); such knowledge might be in the form of specific user configuration or by remembering the version of a prior received response. A server MUST NOT send a response containing Transfer-Encoding unless the corresponding request indicates HTTP/1.1 (or later minor revisions).¶

A server that receives a request message with a transfer coding it does not understand SHOULD respond with 501 (Not Implemented).¶

6.2. Content-Length

When a message does not have a Transfer-Encoding header field, a Content-Length header field can provide the anticipated size, as a decimal number of octets, for a potential payload body. For messages that do include a payload body, the Content-Length field value provides the framing information necessary for determining where the body (and message) ends. For messages that do not include a payload body, the Content-Length indicates the size of the selected representation (Section 7.2.4 of [Semantics]).¶

6.3. Message Body Length

The length of a message body is determined by one of the following (in order of precedence):¶

1. Any response to a HEAD request and any response with a 1xx (Informational), 204 (No Content), or 304 (Not Modified) status code is always terminated by the first empty line after the header fields, regardless of the header fields present in the message, and thus cannot contain a message body.¶

2. Any 2xx (Successful) response to a CONNECT request implies that the connection will become a tunnel immediately after the empty line that concludes the header fields. A client MUST ignore any Content-Length or Transfer-Encoding header fields received in such a message.¶

3. If a Transfer-Encoding header field is present and the chunked transfer coding (Section 7.1) is the final encoding, the message body length is determined by reading and decoding the chunked data until the transfer coding indicates the data is complete.¶

   If a Transfer-Encoding header field is present in a response and the chunked transfer coding is not the final encoding, the message body length is determined by reading the connection until it is closed by the server. If a Transfer-Encoding header field is present in a request and the chunked transfer coding is not the final encoding, the message body length cannot be determined reliably; the server MUST respond with the 400 (Bad Request) status code and then close the connection.¶

   If a message is received with both a Transfer-Encoding and a Content-Length header field, the Transfer-Encoding overrides the Content-Length. Such a message might indicate an attempt to perform request smuggling (Section 11.2) or response splitting (Section 11.1) and ought to be handled as an error. A sender MUST remove the received Content-Length field prior to forwarding such a message downstream.¶

4. If a message is received without Transfer-Encoding and with an invalid Content-Length header field, then the message framing is invalid and the recipient MUST treat it as an unrecoverable error, unless the field value can be successfully parsed as a comma-separated list (Section 5.5 of [Semantics]), all values in the list are valid, and all values in the list are the same. If this is a request message, the server MUST respond with a 400 (Bad Request) status code and then close the connection. If this is a response message received by a proxy, the proxy MUST close the connection to the server, discard the received response, and send a 502 (Bad Gateway) response to the client. If this is a response message received by a user agent, the user agent MUST close the connection to the server and discard the received response.¶

5. If a valid Content-Length header field is present without Transfer-Encoding, its decimal value defines the expected message body length in octets. If the sender closes the connection or the recipient times out before the indicated number of octets are received, the recipient MUST consider the message to be incomplete and close the connection.¶

6. If this is a request message and none of the above are true, then the message body length is zero (no message body is present).¶

7. Otherwise, this is a response message without a declared message body length, so the message body length is determined by the number of octets received prior to the server closing the connection.¶

Since there is no way to distinguish a successfully completed, close-delimited response message from a partially received message interrupted by network failure, a server SHOULD generate encoding or length-delimited messages whenever possible. The close-delimiting feature exists primarily for backwards compatibility with HTTP/1.0.¶

A server MAY reject a request that contains a message body but not a Content-Length by responding with 411 (Length Required).¶

Unless a transfer coding other than chunked has been applied, a client that sends a request containing a message body SHOULD use a valid Content-Length header field if the message body length is known in advance, rather than the chunked transfer coding, since some existing services respond to chunked with a 411 (Length Required) status code even though they understand the chunked transfer coding. This is typically because such services are implemented via a gateway that requires a content-length in advance of being called and the server is unable or unwilling to buffer the entire request before processing.¶

A user agent that sends a request containing a message body MUST send a valid Content-Length header field if it does not know the server will handle HTTP/1.1 (or later) requests; such knowledge can be in the form of specific user configuration or by remembering the version of a prior received response.¶

If the final response to the last request on a connection has been completely received and there remains additional data to read, a user agent MAY discard the remaining data or attempt to determine if that data belongs as part of the prior response body, which might be the case if the prior message's Content-Length value is incorrect. A client MUST NOT process, cache, or forward such extra data as a separate response, since such behavior would be vulnerable to cache poisoning.¶

7.1. Chunked Transfer Coding

The chunked transfer coding wraps the payload body in order to transfer it as a series of chunks, each with its own size indicator, followed by an OPTIONAL trailer section containing trailer fields. Chunked enables content streams of unknown size to be transferred as a sequence of length-delimited buffers, which enables the sender to retain connection persistence and the recipient to know when it has received the entire message.¶

  chunked-body   = *chunk
                   last-chunk
                   trailer-section
                   CRLF

  chunk          = chunk-size [ chunk-ext ] CRLF
                   chunk-data CRLF
  chunk-size     = 1*HEXDIG
  last-chunk     = 1*("0") [ chunk-ext ] CRLF

  chunk-data     = 1*OCTET ; a sequence of chunk-size octets

The chunk-size field is a string of hex digits indicating the size of the chunk-data in octets. The chunked transfer coding is complete when a chunk with a chunk-size of zero is received, possibly followed by a trailer section, and finally terminated by an empty line.¶

A recipient MUST be able to parse and decode the chunked transfer coding.¶

Note that HTTP/1.1 does not define any means to limit the size of a chunked response such that an intermediary can be assured of buffering the entire response.¶

The chunked encoding does not define any parameters. Their presence SHOULD be treated as an error.¶

  chunk-ext      = *( BWS ";" BWS chunk-ext-name
                      [ BWS "=" BWS chunk-ext-val ] )

  chunk-ext-name = token
  chunk-ext-val  = token / quoted-string

  trailer-section   = *( field-line CRLF )

  length := 0
  read chunk-size, chunk-ext (if any), and CRLF
  while (chunk-size > 0) {
     read chunk-data and CRLF
     append chunk-data to decoded-body
     length := length + chunk-size
     read chunk-size, chunk-ext (if any), and CRLF
  }
  read trailer field
  while (trailer field is not empty) {
     if (trailer fields are stored/forwarded separately) {
         append trailer field to existing trailer fields
     }
     else if (trailer field is understood and defined as mergeable) {
         merge trailer field with existing header fields
     }
     else {
         discard trailer field
     }
     read trailer field
  }
  Content-Length := length
  Remove "chunked" from Transfer-Encoding
  Remove Trailer from existing header fields

7.2. Transfer Codings for Compression

The following transfer coding names for compression are defined by the same algorithm as their corresponding content coding:¶

compress (and x-compress)

See Section 7.1.2.1 of [Semantics].¶

deflate

See Section 7.1.2.2 of [Semantics].¶

gzip (and x-gzip)

See Section 7.1.2.3 of [Semantics].¶

The compression codings do not define any parameters. Their presence SHOULD be treated as an error.¶

7.3. Transfer Coding Registry

The "HTTP Transfer Coding Registry" defines the namespace for transfer coding names. It is maintained at <https://www.iana.org/assignments/http-parameters>.¶

Registrations MUST include the following fields:¶

• Name¶
• Description¶
• Pointer to specification text¶

Names of transfer codings MUST NOT overlap with names of content codings (Section 7.1.2 of [Semantics]) unless the encoding transformation is identical, as is the case for the compression codings defined in Section 7.2.¶

The TE header field (Section 5.6.5 of [Semantics]) uses a pseudo parameter named "q" as rank value when multiple transfer codings are acceptable. Future registrations of transfer codings SHOULD NOT define parameters called "q" (case-insensitively) in order to avoid ambiguities.¶

Values to be added to this namespace require IETF Review (see Section 4.8 of [RFC8126]), and MUST conform to the purpose of transfer coding defined in this specification.¶

Use of program names for the identification of encoding formats is not desirable and is discouraged for future encodings.¶

7.4. Negotiating Transfer Codings

The TE field (Section 5.6.5 of [Semantics]) is used in HTTP/1.1 to indicate what transfer-codings, besides chunked, the client is willing to accept in the response, and whether or not the client is willing to accept trailer fields in a chunked transfer coding.¶

A client MUST NOT send the chunked transfer coding name in TE; chunked is always acceptable for HTTP/1.1 recipients.¶

Three examples of TE use are below.¶

  TE: deflate
  TE:
  TE: trailers, deflate;q=0.5

When multiple transfer codings are acceptable, the client MAY rank the codings by preference using a case-insensitive "q" parameter (similar to the qvalues used in content negotiation fields, Section 7.4.4 of [Semantics]). The rank value is a real number in the range 0 through 1, where 0.001 is the least preferred and 1 is the most preferred; a value of 0 means "not acceptable".¶

If the TE field value is empty or if no TE field is present, the only acceptable transfer coding is chunked. A message with no transfer coding is always acceptable.¶

The keyword "trailers" indicates that the sender will not discard trailer fields, as described in Section 5.6 of [Semantics].¶

Since the TE header field only applies to the immediate connection, a sender of TE MUST also send a "TE" connection option within the Connection header field (Section 6.8 of [Semantics]) in order to prevent the TE field from being forwarded by intermediaries that do not support its semantics.¶

9.1. Establishment

It is beyond the scope of this specification to describe how connections are established via various transport- or session-layer protocols. Each connection applies to only one transport link.¶

9.2. Associating a Response to a Request

HTTP/1.1 does not include a request identifier for associating a given request message with its corresponding one or more response messages. Hence, it relies on the order of response arrival to correspond exactly to the order in which requests are made on the same connection. More than one response message per request only occurs when one or more informational responses (1xx, see Section 10.2 of [Semantics]) precede a final response to the same request.¶

A client that has more than one outstanding request on a connection MUST maintain a list of outstanding requests in the order sent and MUST associate each received response message on that connection to the highest ordered request that has not yet received a final (non-1xx) response.¶

If an HTTP/1.1 client receives data on a connection that doesn't have any outstanding requests, it MUST NOT consider them to be a response to a not-yet-issued request; it SHOULD close the connection, since message delimitation is now ambiguous, unless the data consists only of one or more CRLF (which can be discarded, as per Section 2.2).¶

9.3. Persistence

HTTP/1.1 defaults to the use of "persistent connections", allowing multiple requests and responses to be carried over a single connection. The "close" connection option is used to signal that a connection will not persist after the current request/response. HTTP implementations SHOULD support persistent connections.¶

A recipient determines whether a connection is persistent or not based on the most recently received message's protocol version and Connection header field (Section 6.8 of [Semantics]), if any:¶

• If the "close" connection option is present, the connection will not persist after the current response; else,¶
• If the received protocol is HTTP/1.1 (or later), the connection will persist after the current response; else,¶
• If the received protocol is HTTP/1.0, the "keep-alive" connection option is present, either the recipient is not a proxy or the message is a response, and the recipient wishes to honor the HTTP/1.0 "keep-alive" mechanism, the connection will persist after the current response; otherwise,¶
• The connection will close after the current response.¶

A client that does not support persistent connections MUST send the "close" connection option in every request message.¶

A server that does not support persistent connections MUST send the "close" connection option in every response message that does not have a 1xx (Informational) status code.¶

A client MAY send additional requests on a persistent connection until it sends or receives a "close" connection option or receives an HTTP/1.0 response without a "keep-alive" connection option.¶

In order to remain persistent, all messages on a connection need to have a self-defined message length (i.e., one not defined by closure of the connection), as described in Section 6. A server MUST read the entire request message body or close the connection after sending its response, since otherwise the remaining data on a persistent connection would be misinterpreted as the next request. Likewise, a client MUST read the entire response message body if it intends to reuse the same connection for a subsequent request.¶

A proxy server MUST NOT maintain a persistent connection with an HTTP/1.0 client (see Section 19.7.1 of [RFC2068] for information and discussion of the problems with the Keep-Alive header field implemented by many HTTP/1.0 clients).¶

See Appendix C.1.2 for more information on backwards compatibility with HTTP/1.0 clients.¶

9.4. Concurrency

A client ought to limit the number of simultaneous open connections that it maintains to a given server.¶

Previous revisions of HTTP gave a specific number of connections as a ceiling, but this was found to be impractical for many applications. As a result, this specification does not mandate a particular maximum number of connections but, instead, encourages clients to be conservative when opening multiple connections.¶

Multiple connections are typically used to avoid the "head-of-line blocking" problem, wherein a request that takes significant server-side processing and/or has a large payload blocks subsequent requests on the same connection. However, each connection consumes server resources. Furthermore, using multiple connections can cause undesirable side effects in congested networks.¶

Note that a server might reject traffic that it deems abusive or characteristic of a denial-of-service attack, such as an excessive number of open connections from a single client.¶

9.5. Failures and Timeouts

Servers will usually have some timeout value beyond which they will no longer maintain an inactive connection. Proxy servers might make this a higher value since it is likely that the client will be making more connections through the same proxy server. The use of persistent connections places no requirements on the length (or existence) of this timeout for either the client or the server.¶

A client or server that wishes to time out SHOULD issue a graceful close on the connection. Implementations SHOULD constantly monitor open connections for a received closure signal and respond to it as appropriate, since prompt closure of both sides of a connection enables allocated system resources to be reclaimed.¶

A client, server, or proxy MAY close the transport connection at any time. For example, a client might have started to send a new request at the same time that the server has decided to close the "idle" connection. From the server's point of view, the connection is being closed while it was idle, but from the client's point of view, a request is in progress.¶

A server SHOULD sustain persistent connections, when possible, and allow the underlying transport's flow-control mechanisms to resolve temporary overloads, rather than terminate connections with the expectation that clients will retry. The latter technique can exacerbate network congestion.¶

A client sending a message body SHOULD monitor the network connection for an error response while it is transmitting the request. If the client sees a response that indicates the server does not wish to receive the message body and is closing the connection, the client SHOULD immediately cease transmitting the body and close its side of the connection.¶

9.6. Tear-down

The Connection header field (Section 6.8 of [Semantics]) provides a "close" connection option that a sender SHOULD send when it wishes to close the connection after the current request/response pair.¶

A client that sends a "close" connection option MUST NOT send further requests on that connection (after the one containing "close") and MUST close the connection after reading the final response message corresponding to this request.¶

A server that receives a "close" connection option MUST initiate a close of the connection (see below) after it sends the final response to the request that contained "close". The server SHOULD send a "close" connection option in its final response on that connection. The server MUST NOT process any further requests received on that connection.¶

A server that sends a "close" connection option MUST initiate a close of the connection (see below) after it sends the response containing "close". The server MUST NOT process any further requests received on that connection.¶

A client that receives a "close" connection option MUST cease sending requests on that connection and close the connection after reading the response message containing the "close"; if additional pipelined requests had been sent on the connection, the client SHOULD NOT assume that they will be processed by the server.¶

If a server performs an immediate close of a TCP connection, there is a significant risk that the client will not be able to read the last HTTP response. If the server receives additional data from the client on a fully closed connection, such as another request that was sent by the client before receiving the server's response, the server's TCP stack will send a reset packet to the client; unfortunately, the reset packet might erase the client's unacknowledged input buffers before they can be read and interpreted by the client's HTTP parser.¶

To avoid the TCP reset problem, servers typically close a connection in stages. First, the server performs a half-close by closing only the write side of the read/write connection. The server then continues to read from the connection until it receives a corresponding close by the client, or until the server is reasonably certain that its own TCP stack has received the client's acknowledgement of the packet(s) containing the server's last response. Finally, the server fully closes the connection.¶

It is unknown whether the reset problem is exclusive to TCP or might also be found in other transport connection protocols.¶

Note that a TCP connection that is half-closed by the client does not delimit a request message, nor does it imply that the client is no longer interested in a response. In general, transport signals cannot be relied upon to signal edge cases, since HTTP/1.1 is independent of transport.¶

9.7. TLS Connection Initiation

Conceptually, HTTP/TLS is simply sending HTTP messages over a connection secured via TLS [RFC8446].¶

The HTTP client also acts as the TLS client. It initiates a connection to the server on the appropriate port and sends the TLS ClientHello to begin the TLS handshake. When the TLS handshake has finished, the client may then initiate the first HTTP request. All HTTP data MUST be sent as TLS "application data", but is otherwise treated like a normal connection for HTTP (including potential reuse as a persistent connection).¶

9.8. TLS Connection Closure

TLS provides a facility for secure connection closure. When a valid closure alert is received, an implementation can be assured that no further data will be received on that connection. TLS implementations MUST initiate an exchange of closure alerts before closing a connection. A TLS implementation MAY, after sending a closure alert, close the connection without waiting for the peer to send its closure alert, generating an "incomplete close". Note that an implementation which does this MAY choose to reuse the session. This SHOULD only be done when the application knows (typically through detecting HTTP message boundaries) that it has received all the message data that it cares about.¶

As specified in [RFC8446], any implementation which receives a connection close without first receiving a valid closure alert (a "premature close") MUST NOT reuse that session. Note that a premature close does not call into question the security of the data already received, but simply indicates that subsequent data might have been truncated. Because TLS is oblivious to HTTP request/response boundaries, it is necessary to examine the HTTP data itself (specifically the Content-Length header) to determine whether the truncation occurred inside a message or between messages.¶

When encountering a premature close, a client SHOULD treat as completed all requests for which it has received as much data as specified in the Content-Length header.¶

A client detecting an incomplete close SHOULD recover gracefully. It MAY resume a TLS session closed in this fashion.¶

Clients MUST send a closure alert before closing the connection. Clients which are unprepared to receive any more data MAY choose not to wait for the server's closure alert and simply close the connection, thus generating an incomplete close on the server side.¶

Servers SHOULD be prepared to receive an incomplete close from the client, since the client can often determine when the end of server data is. Servers SHOULD be willing to resume TLS sessions closed in this fashion.¶

Servers MUST attempt to initiate an exchange of closure alerts with the client before closing the connection. Servers MAY close the connection after sending the closure alert, thus generating an incomplete close on the client side.¶

10.1. Media Type message/http

The message/http media type can be used to enclose a single HTTP request or response message, provided that it obeys the MIME restrictions for all "message" types regarding line length and encodings.¶

Type name:

message¶

Subtype name:

http¶

Required parameters:

N/A¶

Optional parameters:

version, msgtype¶

version:

The HTTP-version number of the enclosed message (e.g., "1.1"). If not present, the version can be determined from the first line of the body.¶

msgtype:

The message type - "request" or "response". If not present, the type can be determined from the first line of the body.¶

Encoding considerations:

only "7bit", "8bit", or "binary" are permitted¶

Security considerations:

see Section 11¶

Interoperability considerations:

N/A¶

Published specification:

This specification (see Section 10.1).¶

Applications that use this media type:

N/A¶

Fragment identifier considerations:

N/A¶

Additional information:

Magic number(s):

N/A¶

Deprecated alias names for this type:

N/A¶

File extension(s):

N/A¶

Macintosh file type code(s):

N/A¶

Person and email address to contact for further information:

See Authors' Addresses section.¶

Intended usage:

COMMON¶

Restrictions on usage:

N/A¶

Author:

See Authors' Addresses section.¶

Change controller:

IESG¶

10.2. Media Type application/http

The application/http media type can be used to enclose a pipeline of one or more HTTP request or response messages (not intermixed).¶

Type name:

application¶

Subtype name:

http¶

Required parameters:

N/A¶

Optional parameters:

version, msgtype¶

version:

The HTTP-version number of the enclosed messages (e.g., "1.1"). If not present, the version can be determined from the first line of the body.¶

msgtype:

The message type - "request" or "response". If not present, the type can be determined from the first line of the body.¶

Encoding considerations:

HTTP messages enclosed by this type are in "binary" format; use of an appropriate Content-Transfer-Encoding is required when transmitted via email.¶

Security considerations:

see Section 11¶

Interoperability considerations:

N/A¶

Published specification:

This specification (see Section 10.2).¶

Applications that use this media type:

N/A¶

Fragment identifier considerations:

N/A¶

Additional information:

Deprecated alias names for this type:

N/A¶

Magic number(s):

N/A¶

File extension(s):

N/A¶

Macintosh file type code(s):

N/A¶

Person and email address to contact for further information:

See Authors' Addresses section.¶

Intended usage:

COMMON¶

Restrictions on usage:

N/A¶

Author:

See Authors' Addresses section.¶

Change controller:

IESG¶

11.1. Response Splitting

Response splitting (a.k.a, CRLF injection) is a common technique, used in various attacks on Web usage, that exploits the line-based nature of HTTP message framing and the ordered association of requests to responses on persistent connections [Klein]. This technique can be particularly damaging when the requests pass through a shared cache.¶

Response splitting exploits a vulnerability in servers (usually within an application server) where an attacker can send encoded data within some parameter of the request that is later decoded and echoed within any of the response header fields of the response. If the decoded data is crafted to look like the response has ended and a subsequent response has begun, the response has been split and the content within the apparent second response is controlled by the attacker. The attacker can then make any other request on the same persistent connection and trick the recipients (including intermediaries) into believing that the second half of the split is an authoritative answer to the second request.¶

For example, a parameter within the request-target might be read by an application server and reused within a redirect, resulting in the same parameter being echoed in the Location header field of the response. If the parameter is decoded by the application and not properly encoded when placed in the response field, the attacker can send encoded CRLF octets and other content that will make the application's single response look like two or more responses.¶

A common defense against response splitting is to filter requests for data that looks like encoded CR and LF (e.g., "%0D" and "%0A"). However, that assumes the application server is only performing URI decoding, rather than more obscure data transformations like charset transcoding, XML entity translation, base64 decoding, sprintf reformatting, etc. A more effective mitigation is to prevent anything other than the server's core protocol libraries from sending a CR or LF within the header section, which means restricting the output of header fields to APIs that filter for bad octets and not allowing application servers to write directly to the protocol stream.¶

11.2. Request Smuggling

Request smuggling ([Linhart]) is a technique that exploits differences in protocol parsing among various recipients to hide additional requests (which might otherwise be blocked or disabled by policy) within an apparently harmless request. Like response splitting, request smuggling can lead to a variety of attacks on HTTP usage.¶

This specification has introduced new requirements on request parsing, particularly with regard to message framing in Section 6.3, to reduce the effectiveness of request smuggling.¶

11.3. Message Integrity

HTTP does not define a specific mechanism for ensuring message integrity, instead relying on the error-detection ability of underlying transport protocols and the use of length or chunk-delimited framing to detect completeness. Additional integrity mechanisms, such as hash functions or digital signatures applied to the content, can be selectively added to messages via extensible metadata fields. Historically, the lack of a single integrity mechanism has been justified by the informal nature of most HTTP communication. However, the prevalence of HTTP as an information access mechanism has resulted in its increasing use within environments where verification of message integrity is crucial.¶

User agents are encouraged to implement configurable means for detecting and reporting failures of message integrity such that those means can be enabled within environments for which integrity is necessary. For example, a browser being used to view medical history or drug interaction information needs to indicate to the user when such information is detected by the protocol to be incomplete, expired, or corrupted during transfer. Such mechanisms might be selectively enabled via user agent extensions or the presence of message integrity metadata in a response. At a minimum, user agents ought to provide some indication that allows a user to distinguish between a complete and incomplete response message (Section 8) when such verification is desired.¶

11.4. Message Confidentiality

HTTP relies on underlying transport protocols to provide message confidentiality when that is desired. HTTP has been specifically designed to be independent of the transport protocol, such that it can be used over many different forms of encrypted connection, with the selection of such transports being identified by the choice of URI scheme or within user agent configuration.¶

The "https" scheme can be used to identify resources that require a confidential connection, as described in Section 2.5.2 of [Semantics].¶

12.1. Field Name Registration

Please update the "Hypertext Transfer Protocol (HTTP) Field Name Registry" at <https://www.iana.org/assignments/http-fields> with the field names listed in the two tables of Section 5.¶

12.2. Media Type Registration

Please update the "Media Types" registry at <https://www.iana.org/assignments/media-types> with the registration information in Section 10.1 and Section 10.2 for the media types "message/http" and "application/http", respectively.¶

12.3. Transfer Coding Registration

Please update the "HTTP Transfer Coding Registry" at <https://www.iana.org/assignments/http-parameters/> with the registration procedure of Section 7.3 and the content coding names summarized in the table of Section 7.¶

12.4. Upgrade Token Registration

Please update the "Hypertext Transfer Protocol (HTTP) Upgrade Token Registry" at <https://www.iana.org/assignments/http-upgrade-tokens> with the registration procedure of Section 6.7.2 of [Semantics] and the upgrade token names summarized in the table of Section 6.7.1 of [Semantics].¶

12.5. ALPN Protocol ID Registration

Please update the "TLS Application-Layer Protocol Negotiation (ALPN) Protocol IDs" registry at <https://www.iana.org/assignments/tls-extensiontype-values/tls-extensiontype-values.xhtml> with the registration below:¶

B.1. MIME-Version

HTTP is not a MIME-compliant protocol. However, messages can include a single MIME-Version header field to indicate what version of the MIME protocol was used to construct the message. Use of the MIME-Version header field indicates that the message is in full conformance with the MIME protocol (as defined in [RFC2045]). Senders are responsible for ensuring full conformance (where possible) when exporting HTTP messages to strict MIME environments.¶

B.2. Conversion to Canonical Form

MIME requires that an Internet mail body part be converted to canonical form prior to being transferred, as described in Section 4 of [RFC2049]. Section 7.1.1.2 of [Semantics] describes the forms allowed for subtypes of the "text" media type when transmitted over HTTP. [RFC2046] requires that content with a type of "text" represent line breaks as CRLF and forbids the use of CR or LF outside of line break sequences. HTTP allows CRLF, bare CR, and bare LF to indicate a line break within text content.¶

A proxy or gateway from HTTP to a strict MIME environment ought to translate all line breaks within text media types to the RFC 2049 canonical form of CRLF. Note, however, this might be complicated by the presence of a Content-Encoding and by the fact that HTTP allows the use of some charsets that do not use octets 13 and 10 to represent CR and LF, respectively.¶

Conversion will break any cryptographic checksums applied to the original content unless the original content is already in canonical form. Therefore, the canonical form is recommended for any content that uses such checksums in HTTP.¶

B.3. Conversion of Date Formats

HTTP/1.1 uses a restricted set of date formats (Section 5.4.1.5 of [Semantics]) to simplify the process of date comparison. Proxies and gateways from other protocols ought to ensure that any Date header field present in a message conforms to one of the HTTP/1.1 formats and rewrite the date if necessary.¶

B.4. Conversion of Content-Encoding

MIME does not include any concept equivalent to HTTP/1.1's Content-Encoding header field. Since this acts as a modifier on the media type, proxies and gateways from HTTP to MIME-compliant protocols ought to either change the value of the Content-Type header field or decode the representation before forwarding the message. (Some experimental applications of Content-Type for Internet mail have used a media-type parameter of ";conversions=<content-coding>" to perform a function equivalent to Content-Encoding. However, this parameter is not part of the MIME standards).¶

B.5. Conversion of Content-Transfer-Encoding

HTTP does not use the Content-Transfer-Encoding field of MIME. Proxies and gateways from MIME-compliant protocols to HTTP need to remove any Content-Transfer-Encoding prior to delivering the response message to an HTTP client.¶

Proxies and gateways from HTTP to MIME-compliant protocols are responsible for ensuring that the message is in the correct format and encoding for safe transport on that protocol, where "safe transport" is defined by the limitations of the protocol being used. Such a proxy or gateway ought to transform and label the data with an appropriate Content-Transfer-Encoding if doing so will improve the likelihood of safe transport over the destination protocol.¶

B.6. MHTML and Line Length Limitations

HTTP implementations that share code with MHTML [RFC2557] implementations need to be aware of MIME line length limitations. Since HTTP does not have this limitation, HTTP does not fold long lines. MHTML messages being transported by HTTP follow all conventions of MHTML, including line length limitations and folding, canonicalization, etc., since HTTP transfers message-bodies as payload and, aside from the "multipart/byteranges" type (Section 7.3.5 of [Semantics]), does not interpret the content or any MIME header lines that might be contained therein.¶

C.1. Changes from HTTP/1.0

This section summarizes major differences between versions HTTP/1.0 and HTTP/1.1.¶

C.2. Changes from RFC 7230

Most of the sections introducing HTTP's design goals, history, architecture, conformance criteria, protocol versioning, URIs, message routing, and header fields have been moved to [Semantics]. This document has been reduced to just the messaging syntax and connection management requirements specific to HTTP/1.1.¶

Prohibited generation of bare CRs outside of payload body. (Section 2.2)¶

In the ABNF for chunked extensions, re-introduced (bad) whitespace around ";" and "=". Whitespace was removed in [RFC7230], but that change was found to break existing implementations (see [Err4667]). (Section 7.1.1)¶

Trailer field semantics now transcend the specifics of chunked encoding. The decoding algorithm for chunked (Section 7.1.3) has been updated to encourage storage/forwarding of trailer fields separately from the header section, to only allow merging into the header section if the recipient knows the corresponding field definition permits and defines how to merge, and otherwise to discard the trailer fields instead of merging. The trailer part is now called the trailer section to be more consistent with the header section and more distinct from a body part. (Section 7.1.2)¶

Disallowed transfer coding parameters called "q" in order to avoid conflicts with the use of ranks in the TE header field. (Section 7.3)¶

D.1. Between RFC7230 and draft 00

The changes were purely editorial:¶

• Change boilerplate and abstract to indicate the "draft" status, and update references to ancestor specifications.¶
• Adjust historical notes.¶
• Update links to sibling specifications.¶
• Replace sections listing changes from RFC 2616 by new empty sections referring to RFC 723x.¶
• Remove acknowledgements specific to RFC 723x.¶
• Move "Acknowledgements" to the very end and make them unnumbered.¶

D.2. Since draft-ietf-httpbis-messaging-00

The changes in this draft are editorial, with respect to HTTP as a whole, to move all core HTTP semantics into [Semantics]:¶

• Moved introduction, architecture, conformance, and ABNF extensions from RFC 7230 (Messaging) to semantics [Semantics].¶
• Moved discussion of MIME differences from RFC 7231 (Semantics) to Appendix B since they mostly cover transforming 1.1 messages.¶
• Moved all extensibility tips, registration procedures, and registry tables from the IANA considerations to normative sections, reducing the IANA considerations to just instructions that will be removed prior to publication as an RFC.¶

D.3. Since draft-ietf-httpbis-messaging-01

• Cite RFC 8126 instead of RFC 5226 (<https://github.com/httpwg/http-core/issues/75>)¶
• Resolved erratum 4779, no change needed here (<https://github.com/httpwg/http-core/issues/87>, <https://www.rfc-editor.org/errata/eid4779>)¶
• In Section 7, fixed prose claiming transfer parameters allow bare names (<https://github.com/httpwg/http-core/issues/88>, <https://www.rfc-editor.org/errata/eid4839>)¶
• Resolved erratum 4225, no change needed here (<https://github.com/httpwg/http-core/issues/90>, <https://www.rfc-editor.org/errata/eid4225>)¶
• Replace "response code" with "response status code" (<https://github.com/httpwg/http-core/issues/94>, <https://www.rfc-editor.org/errata/eid4050>)¶
• In Section 9.3, clarify statement about HTTP/1.0 keep-alive (<https://github.com/httpwg/http-core/issues/96>, <https://www.rfc-editor.org/errata/eid4205>)¶
• In Section 7.1.1, re-introduce (bad) whitespace around ";" and "=" (<https://github.com/httpwg/http-core/issues/101>, <https://www.rfc-editor.org/errata/eid4667>, <https://www.rfc-editor.org/errata/eid4825>)¶
• In Section 7.3, state that transfer codings should not use parameters named "q" (<https://github.com/httpwg/http-core/issues/15>, <https://www.rfc-editor.org/errata/eid4683>)¶
• In Section 7, mark coding name "trailers" as reserved in the IANA registry (<https://github.com/httpwg/http-core/issues/108>)¶

D.4. Since draft-ietf-httpbis-messaging-02

• In Section 4, explain why the reason phrase should be ignored by clients (<https://github.com/httpwg/http-core/issues/60>).¶
• Add Section 9.2 to explain how request/response correlation is performed (<https://github.com/httpwg/http-core/issues/145>)¶

D.5. Since draft-ietf-httpbis-messaging-03

• In Section 9.2, caution against treating data on a connection as part of a not-yet-issued request (<https://github.com/httpwg/http-core/issues/26>)¶
• In Section 7, remove the predefined codings from the ABNF and make it generic instead (<https://github.com/httpwg/http-core/issues/66>)¶
• Use RFC 7405 ABNF notation for case-sensitive string constants (<https://github.com/httpwg/http-core/issues/133>)¶

D.6. Since draft-ietf-httpbis-messaging-04

• In Section 6.7 of [Semantics], clarify that protocol-name is to be matched case-insensitively (<https://github.com/httpwg/http-core/issues/8>)¶
• In Section 5.2, add leading optional whitespace to obs-fold ABNF (<https://github.com/httpwg/http-core/issues/19>, <https://www.rfc-editor.org/errata/eid4189>)¶
• In Section 4, add clarifications about empty reason phrases (<https://github.com/httpwg/http-core/issues/197>)¶
• Move discussion of retries from Section 9.3.1 into [Semantics] (<https://github.com/httpwg/http-core/issues/230>)¶

D.7. Since draft-ietf-httpbis-messaging-05

• In Section 7.1.2, the trailer part has been renamed the trailer section (for consistency with the header section) and trailers are no longer merged as header fields by default, but rather can be discarded, kept separate from header fields, or merged with header fields only if understood and defined as being mergeable (<https://github.com/httpwg/http-core/issues/16>)¶
• In Section 2.1 and related Sections, move the trailing CRLF from the line grammars into the message format (<https://github.com/httpwg/http-core/issues/62>)¶
• Moved Section 2.3 down (<https://github.com/httpwg/http-core/issues/68>)¶
• In Section 6.7 of [Semantics], use 'websocket' instead of 'HTTP/2.0' in examples (<https://github.com/httpwg/http-core/issues/112>)¶
• Move version non-specific text from Section 6 into semantics as "payload body" (<https://github.com/httpwg/http-core/issues/159>)¶
• In Section 9.8, add text from RFC 2818 (<https://github.com/httpwg/http-core/issues/236>)¶

D.8. Since draft-ietf-httpbis-messaging-06

• In Section 12.5, update the APLN protocol id for HTTP/1.1 (<https://github.com/httpwg/http-core/issues/49>)¶
• In Section 5, align with updates to field terminology in semantics (<https://github.com/httpwg/http-core/issues/111>)¶
• In Section 6.8 of [Semantics], clarify that new connection options indeed need to be registered (<https://github.com/httpwg/http-core/issues/285>)¶
• In Section 1.1, reference RFC 8174 as well (<https://github.com/httpwg/http-core/issues/303>)¶

D.9. Since draft-ietf-httpbis-messaging-07

• Move TE: trailers into [Semantics] (<https://github.com/httpwg/http-core/issues/18>)¶
• In Section 6.3, adjust requirements for handling multiple content-length values (<https://github.com/httpwg/http-core/issues/59>)¶
• Throughout, replace "effective request URI" with "target URI" (<https://github.com/httpwg/http-core/issues/259>)¶
• In Section 6.1, don't claim Transfer-Encoding is supported by HTTP/2 or later (<https://github.com/httpwg/http-core/issues/297>)¶

D.10. Since draft-ietf-httpbis-messaging-08

• In Section 2.2, disallow bare CRs (<https://github.com/httpwg/http-core/issues/31>)¶
• Appendix A now uses the sender variant of the "#" list expansion (<https://github.com/httpwg/http-core/issues/192>)¶
• In Section 5, adjust IANA "Close" entry for new registry format (<https://github.com/httpwg/http-core/issues/273>)¶

D.11. Since draft-ietf-httpbis-messaging-09

• Switch to xml2rfc v3 mode for draft generation (<https://github.com/httpwg/http-core/issues/394>)¶

D.12. Since draft-ietf-httpbis-messaging-10

• In Section 6.3, note that TCP half-close does not delimit a request; talk about corresponding server-side behaviour in Section 9.6 (<https://github.com/httpwg/http-core/issues/22>)¶
• Moved requirements specific to HTTP/1.1 from [Semantics] into Section 3.2 (<https://github.com/httpwg/http-core/issues/182>)¶
• In Section 6.1 (Transfer-Encoding), adjust ABNF to allow empty lists (<https://github.com/httpwg/http-core/issues/210>)¶
• In Section 9.7, add text from RFC 2818 (<https://github.com/httpwg/http-core/issues/236>)¶
• Moved definitions of "TE" and "Upgrade" into [Semantics] (<https://github.com/httpwg/http-core/issues/392>)¶
• Moved definition of "Connection" into [Semantics] (<https://github.com/httpwg/http-core/issues/407>)¶