Grant Negotiation and Authorization Protocol

1.1. Terminology

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶

This document contains non-normative examples of partial and complete HTTP messages, JSON structures, URIs, query components, keys, and other elements. Whenever possible, the document uses URI as a generic term, since it aligns with [RFC3986] recommendations and matches better with the intent that the identifier may be reachable through various/generic means (compared to URLs). Some examples use a single trailing backslash \ to indicate line wrapping for long values, as per [RFC8792]. The \ character and leading spaces on wrapped lines are not part of the value.¶

This document uses the term "mutual TLS" as defined by [RFC8705]. The shortened form "MTLS" is used to mean the same thing.¶

For brevity, the term "signature" on its own is used in this document to refer to both digital signatures (which use asymmetric cryptography) and keyed MACs (which use symmetric cryptography). Similarly, the verb "sign" refers to the generation of either a digital signature or keyed MAC over a given signature base. The qualified term "digital signature" refers specifically to the output of an asymmetric cryptographic signing operation.¶

1.2. Roles

The parties in GNAP perform actions under different roles. Roles are defined by the actions taken and the expectations leveraged on the role by the overall protocol.¶

Authorization Server (AS):

server that grants delegated privileges to a particular instance of client software in the form of access tokens or other information (such as subject information). The AS is uniquely defined by the grant endpoint URI, which is the absolute URI where grant requests are started by clients.¶

Client:

application that consumes resources from one or several RSs, possibly requiring access privileges from one or several ASs. The client is operated by the end user or it runs autonomously on behalf of a resource owner.¶

Example: a client can be a mobile application, a web application, a back-end data processor, etc.¶

Note: this specification differentiates between a specific instance (the client instance, identified by its unique key) and the software running the instance (the client software). For some kinds of client software, there could be many instances of that software, each instance with a different key.¶

Resource Server (RS):

server that provides an API on protected resources, where operations on the API require a valid access token issued by a trusted AS.¶

Resource Owner (RO):

subject entity that may grant or deny operations on resources it has authority upon.¶

Note: the act of granting or denying an operation may be manual (i.e. through an interaction with a physical person) or automatic (i.e. through predefined organizational rules).¶

End user:

natural person that operates a client instance.¶

Note: that natural person may or may not be the same entity as the RO.¶

The design of GNAP does not assume any one deployment architecture, but instead attempts to define roles that can be fulfilled in a number of different ways for different use cases. As long as a given role fulfills all of its obligations and behaviors as defined by the protocol, GNAP does not make additional requirements on its structure or setup.¶

Multiple roles can be fulfilled by the same party, and a given party can switch roles in different instances of the protocol. For example, the RO and end user in many instances are the same person, where a user is authorizing the client instance to act on their own behalf at the RS. In this case, one party fulfills both of the RO and end-user roles, but the roles themselves are still defined separately from each other to allow for other use cases where they are fulfilled by different parties.¶

For another example, in some complex scenarios, an RS receiving requests from one client instance can act as a client instance for a downstream secondary RS in order to fulfill the original request. In this case, one piece of software is both an RS and a client instance from different perspectives, and it fulfills these roles separately as far as the overall protocol is concerned.¶

A single role need not be deployed as a monolithic service. For example, a client instance could have front-end components that are installed on the end user's device as well as a back-end system that the front-end communicates with. If both of these components participate in the delegation protocol, they are both considered part of the client instance. If there are several copies of the client software that run separately but all share the same key material, such as a deployed cluster, then this cluster is considered a single client instance. In these cases, the distinct components of what is considered a GNAP client instance may use any number of different communication mechanisms between them, all of which would be considered an implementation detail of the client instances and out of scope of GNAP.¶

For another example, an AS could likewise be built out of many constituent components in a distributed architecture. The component that the client instance calls directly could be different from the component that the RO interacts with to drive consent, since API calls and user interaction have different security considerations in many environments. Furthermore, the AS could need to collect identity claims about the RO from one system that deals with user attributes while generating access tokens at another system that deals with security rights. From the perspective of GNAP, all of these are pieces of the AS and together fulfill the role of the AS as defined by the protocol. These pieces may have their own internal communications mechanisms which are considered out of scope of GNAP.¶

1.3. Elements

In addition to the roles above, the protocol also involves several elements that are acted upon by the roles throughout the process.¶

Access Token:

a data artifact representing a set of rights and/or attributes.¶

Note: an access token can be first issued to a client instance (requiring authorization by the RO) and subsequently rotated.¶

Grant:

(verb): to permit an instance of client software to receive some attributes at a specific time and valid for a specific duration and/or to exercise some set of delegated rights to access a protected resource;¶

(noun): the act of granting permission to a client instance.¶

Privilege:

right or attribute associated with a subject.¶

Note: the RO defines and maintains the rights and attributes associated to the protected resource, and might temporarily delegate some set of those privileges to an end user. This process is refered to as privilege delegation.¶

Protected Resource:

protected API (Application Programming Interface) served by an RS and that can be accessed by a client, if and only if a valid and sufficient access token is provided.¶

Note: to avoid complex sentences, the specification document may simply refer to "resource" instead of "protected resource".¶

Right:

ability given to a subject to perform a given operation on a resource under the control of an RS.¶

Subject:

person or organization. The subject decides whether and under which conditions its attributes can be disclosed to other parties.¶

Subject Information:

set of statements and attributes asserted by an AS about a subject. These statements can be used by the client instance as part of an authentication decision.¶

1.4. Trust relationships

GNAP defines its trust objective as: "the RO trusts the AS to ensure access validation and delegation of protected resources to end users, through third party clients."¶

This trust objective can be decomposed into trust relationships between software elements and roles, especially the pairs end user/RO, end user/client, client/AS, RS/RO, AS/RO, AS/RS. Trust of an agent by its pair can exist if the pair is informed that the agent has made a promise to follow the protocol in the past (e.g. pre-registration, uncompromised cryptographic components) or if the pair is able to infer by indirect means that the agent has made such a promise (e.g. a compliant client request). Each agent defines its own valuation function of promises given or received. Examples of such valuations can be the benefits from interacting with other agents (e.g. safety in client access, interoperability with identity standards), the cost of following the protocol (including its security and privacy requirements and recommendations), a ranking of promise importance (e.g. a policy decision made by the AS), the assessment of one's vulnerability or risk of not being able to defend against threats, etc. Those valuations may depend on the context of the request. For instance, the AS may decide to either take into account or discard hints provided by the client, the RS may refuse bearer tokens, etc. depending on the specific case in which GNAP is used. Some promises can be affected by previous interactions (e.g., repeated requests).¶

Looking back on each trust relationship:¶

• end user/RO: this relationship exists only when the end user and the RO are different, in which case the end user needs some out of band mechanism of getting the RO consent (see Section 4). GNAP generally assumes that humans can be authenticated thanks to identity protocols (for instance, through an id_token assertion in Section 2.2).¶

• end user/client: the client acts as a user agent. Depending on the technology used (browser, SPA, mobile application, IoT device, etc.), some interactions may or may not be possible (as described in Section 2.5.1). Client developers implement requirements and generally some recommendations or best practices, so that the end users may confidently use their software. However, end users might also be facing an attacker's client software or a poorly-implemented client, without even realizing it.¶

• end user/AS: when the client supports the interaction feature (see Section 3.3), the end user interacts with the AS through an AS-provided interface. In many cases, this happens through a front-channel interaction through the end user's browser. See Section 13.29 for some considerations in trusting these interactions.¶

• client/AS: An honest AS may be facing an attacker's client (as discussed just above), or the reverse, and GNAP aims at making common attacks impractical. The core specification makes access tokens opaque to the client and defines the request/response scheme in detail, therefore avoiding extra trust hypotheses from this critical piece of software. Yet the AS may further define cryptographic attestations or optional rules to simplify the access of clients it already trusts, due to past behavior or organizational policies (see Section 2.3).¶

• RS/RO: the RS promises it protects its resources on behalf of the RO from unauthorized access, and only accepts valid access tokens issued by a trusted AS. In case tokens are key bound, proper validation of the proof method is expected from the RS.¶

• AS/RO: the AS is expected to follow the decisions made by the RO, either through interactive consent requests, repeated interactions, or automated rules (as described in Section 1.6). Privacy considerations aim to reduce the risk of an honest but too-curious AS, or the consequences of an unexpected user data exposure.¶

• AS/RS: the AS promises to issue valid access tokens to legitimate client requests (i.e. after carrying out appropriate due diligence, as defined in the GNAP protocol). Some optional configurations are covered by [I-D.ietf-gnap-resource-servers].¶

A global assumption made by GNAP is that authorization requests are security and privacy sensitive, and appropriate measures are respectively detailed in Section 13 and Section 14.¶

A formal trust model is out of scope of this specification, but one could be developed using techniques such as [promise-theory].¶

1.5. Protocol Flow

GNAP is fundamentally designed to allow delegated access to APIs and other information, such as subject information, using a multi-stage, stateful process. This process allows different parties to provide information into the system to alter and augment the state of the delegated access and its artifacts.¶

The underlying requested grant moves through several states as different actions take place during the protocol:¶

The state of the grant request is defined and managed by the AS, though the client instance also needs to manage its view of the grant request over time. The means by which these roles manage their state is outside the scope of this specification.¶

Processing:

When a request for access (Section 2) is received by the AS, a new grant request is created and placed in the processing state by the AS. This state is also entered when an existing grant request is updated by the client instance and when interaction is completed. In this state, the AS processes the context of the grant request to determine whether interaction with the end user or RO is required for approval of the request. The grant request has to exit this state before a response can be returned to the client instance. If approval is required, the request moves to the pending state and the AS returns a continue response (Section 3.1) along with any appropriate interaction responses (Section 3.3). If no such approval is required, such as when the client instance is acting on its own behalf or the AS can determine that access has been fulfilled, the request moves to the approved state where access tokens for API access (Section 3.2) and subject information (Section 3.4) can be issued to the client instance. If the AS determines that no additional processing can occur (such as a timeout or an unrecoverable error), the grant request is moved to the finalized state and is terminated.¶

Pending:

When a request needs to be approved by a RO, or interaction with the end user is required, the grant request enters a state of pending. In this state, no access tokens can be granted and no subject information can be released to the client instance. While a grant request is in this state, the AS seeks to gather the required consent and authorization (Section 4) for the requested access. A grant request in this state is always associated with a continuation access token bound to the client instance's key (see Section 3.1 for details of the continuation access token). If no interaction finish method (Section 2.5.2) is associated with this request, the client instance can send a polling continue request (Section 5.2) to the AS. This returns a continue response (Section 3.1) while the grant request remains in this state, allowing the client instance to continue to check the state of the pending grant request. If an interaction finish method (Section 2.5.2) is specified in the grant request, the client instance can continue the request after interaction (Section 5.1) to the AS to move this request to the processing state to be re-evaluated by the AS. Note that this occurs whether the grant request has been approved or denied by the RO, since the AS needs to take into account the full context of the request before determining the next step for the grant request. When other information is made available in the context of the grant request, such as through the asynchronous actions of the RO, the AS moves this request to the processing state to be re-evaluated. If the AS determines that no additional interaction can occur, such as all the interaction methods have timed out or a revocation request (Section 5.4) is received from the client instance, the grant request can be moved to the finalized state.¶

Approved:

When a request has been approved by an RO and no further interaction with the end user is required, the grant request enters a state of approved. In this state, responses to the client instance can include access tokens for API access (Section 3.2) and subject information (Section 3.4). If continuation and updates are allowed for this grant request, the AS can include the continuation response (Section 3.1). In this state, post-interaction continuation requests (Section 5.1) are not allowed and will result in an error, since all interaction is assumed to have been completed. If the client instance sends a polling continue request (Section 5.2) while the request is in this state, new access tokens (Section 3.2) can be issued in the response. Note that this always creates a new access token, but any existing access tokens could be rotated and revoked using the token management API (Section 6). The client instance can send an update continuation request (Section 5.3) to modify the requested access, causing the AS to move the request back to the processing state for re-evaluation. If the AS determines that no additional tokens can be issued, and that no additional updates are to be accepted (such as the continuation access tokens have expired), the grant is moved to the finalized state.¶

Finalized:

After the access tokens are issued, if the AS does not allow any additional updates on the grant request, the grant request enters the finalized state. This state is also entered when an existing grant request is revoked by the client instance (Section 5.4) or otherwise revoked by the AS (such as through out-of-band action by the RO). This state can also be entered if the AS determines that no additional processing is possible, for example if the RO has denied the requested access or if interaction is required but no compatible interaction methods are available. Once in this state, no new access tokens can be issued, no subject information can be returned, and no interactions can take place. Once in this state, the grant request is dead and cannot be revived. If future access is desired by the client instance, a new grant request can be created, unrelated to this grant request.¶

While it is possible to deploy an AS in a stateless environment, GNAP is a stateful protocol and such deployments will need a way to manage the current state of the grant request in a secure and deterministic fashion without relying on other components, such as the client software, to keep track of the current state.¶

1.6. Sequences

GNAP can be used in a variety of ways to allow the core delegation process to take place. Many portions of this process are conditionally present depending on the context of the deployments, and not every step in this overview will happen in all circumstances.¶

Note that a connection between roles in this process does not necessarily indicate that a specific protocol message is sent across the wire between the components fulfilling the roles in question, or that a particular step is required every time. For example, for a client instance interested in only getting subject information directly, and not calling an RS, all steps involving the RS below do not apply.¶

In some circumstances, the information needed at a given stage is communicated out of band or is preconfigured between the components or entities performing the roles. For example, one entity can fulfill multiple roles, and so explicit communication between the roles is not necessary within the protocol flow. Additionally some components may not be involved in all use cases. For example, a client instance could be calling the AS just to get direct user information and have no need to get an access token to call an RS.¶

2.1. Requesting Access to Resources

If the client instance is requesting one or more access tokens for the purpose of accessing an API, the client instance MUST include an access_token field. This field MUST be an object (for a single access token (Section 2.1.1)) or an array of these objects (for multiple access tokens (Section 2.1.2)), as described in the following sections.¶

"access_token": {
    "access": [
        {
            "type": "photo-api",
            "actions": [
                "read",
                "write",
                "delete"
            ],
            "locations": [
                "https://server.example.net/",
                "https://resource.local/other"
            ],
            "datatypes": [
                "metadata",
                "images"
            ]
        },
        {
            "type": "walrus-access",
            "actions": [
                "foo",
                "bar"
            ],
            "locations": [
                "https://resource.other/"
            ],
            "datatypes": [
                "data",
                "pictures",
                "walrus whiskers"
            ]
        }
    ],
    "label": "token1-23"
}

"access_token": [
    {
        "label": "token1",
        "access": [
            {
                "type": "photo-api",
                "actions": [
                    "read",
                    "write",
                    "dolphin"
                ],
                "locations": [
                    "https://server.example.net/",
                    "https://resource.local/other"
                ],
                "datatypes": [
                    "metadata",
                    "images"
                ]
            },
            "dolphin-metadata"
        ]
    },
    {
        "label": "token2",
        "access": [
            {
                "type": "walrus-access",
                "actions": [
                    "foo",
                    "bar"
                ],
                "locations": [
                    "https://resource.other/"
                ],
                "datatypes": [
                    "data",
                    "pictures",
                    "walrus whiskers"
                ]
            }
        ],
        "flags": [ "bearer" ]
    }
]

2.2. Requesting Subject Information

If the client instance is requesting information about the RO from the AS, it sends a subject field as a JSON object. This object MAY contain the following fields.¶

sub_id_formats (array of strings):

An array of subject identifier subject formats requested for the RO, as defined by [RFC9493]. REQUIRED if subject identifiers are requested.¶

assertion_formats (array of strings):

An array of requested assertion formats. Possible values include id_token for an OpenID Connect ID Token ([OIDC]) and saml2 for a SAML 2 assertion ([SAML2]). Additional assertion formats are defined by the GNAP Assertion Formats Registry (Section 11.6). REQUIRED if assertions are requested.¶

sub_ids (array of objects):

An array of subject identifiers representing the subject for which information is being requested. Each object is a subject identifier as defined by [RFC9493]. All identifiers in the sub_ids array MUST identify the same subject. If omitted, the AS SHOULD assume that subject information requests are about the current user and SHOULD require direct interaction or proof of presence before releasing information. OPTIONAL.¶

Additional fields are defined in the GNAP Subject Information Request Fields Registry (Section 11.5).¶

"subject": {
  "sub_id_formats": [ "iss_sub", "opaque" ],
  "assertion_formats": [ "id_token", "saml2" ]
}

The AS can determine the RO's identity and permission for releasing this information through interaction with the RO (Section 4), AS policies, or assertions presented by the client instance (Section 2.4). If this is determined positively, the AS MAY return the RO's information in its response (Section 3.4) as requested.¶

Subject identifier types requested by the client instance serve only to identify the RO in the context of the AS and can't be used as communication channels by the client instance, as discussed in Section 3.4.¶

2.3. Identifying the Client Instance

When sending new grant request to the AS, the client instance MUST identify itself by including its client information in the client field of the request and by signing the request with its unique key as described in Section 7.3. Note that once a grant has been created and is in the pending or accepted states, the AS can determine which client is associated with the grant by dereferencing the continuation access token sent in the continuation request (Section 5). As a consequence, the client field is not sent or accepted for continuation requests.¶

Client information is sent by value as an object or by reference as a string (see Section 2.3.1).¶

When client instance information is sent by value, the client field of the request consists of a JSON object with the following fields.¶

key (object / string):

The public key of the client instance to be used in this request as described in Section 7.1 or a reference to a key as described in Section 7.1.1. REQUIRED.¶

class_id (string):

An identifier string that the AS can use to identify the client software comprising this client instance. The contents and format of this field are up to the AS. OPTIONAL.¶

display (object):

An object containing additional information that the AS MAY display to the RO during interaction, authorization, and management. OPTIONAL. (Section 2.3.2)¶

"client": {
    "key": {
        "proof": "httpsig",
        "jwk": {
            "kty": "RSA",
            "e": "AQAB",
            "kid": "xyz-1",
            "alg": "RS256",
            "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_JtffXyaSx8..."
        }
    },
    "class_id": "web-server-1234",
    "display": {
        "name": "My Client Display Name",
        "uri": "https://example.net/client"
    }
}

Additional fields are defined in the GNAP Client Instance Fields Registry (Section 11.7).¶

Absent additional attestations, profiles, or trust mechanisms, both the display and class_id fields are self-declarative, presented by the client instance. The AS needs to exercise caution in their interpretation, taking them as a hint but not as absolute truth. The class_id field can be used in a variety of ways to help the AS make sense of the particular context in which the client instance is operating. In corporate environments, for example, different levels of trust might apply depending on security policies. This field aims to help the AS adjust its own access decisions for different classes of client software. It is possible to configure a set of values and rules during a pre-registration, and then have the client instances provide them later in runtime as a hint to the AS. In other cases, the client runs with a specific AS in mind, so a single hardcoded value would acceptable (for instance, a set top box with a class_id claiming to be "FooBarTV version 4"). While the client instance may not have contacted the AS yet, the value of this class_id field can be evaluated by the AS according to a broader context of dynamic use, alongside other related information available elsewhere (for instance, corresponding fields in a certificate). If the AS is not able to interpret or validate the class_id field, it MUST either return an invalid_client error (Section 3.6) or interpret the request as if the class_id were not present. See additional discussion of client instance impersonation in Section 13.15.¶

The client instance MUST prove possession of any presented key by the proof mechanism associated with the key in the request. Key proofing methods are defined in the GNAP Key Proofing Methods Registry (Section 11.16) and an initial set of methods is described in Section 7.3.¶

If the same public key is sent by value on different access requests, the AS MUST treat these requests as coming from the same client instance for purposes of identification, authentication, and policy application.¶

If the AS does not know the client instance's public key ahead of time, the AS can choose how to process the unknown key. Common approaches include:¶

• Allowing the request and requiring RO authorization in a trust-on-first-use model¶

• Limiting the client's requested access to only certain APIs and information¶

• Denying the request entirely by returning an invalid_client error (Section 3.6)¶

The client instance MUST NOT send a symmetric key by value in the key field of the request, as doing so would expose the key directly instead of simply proving possession of it. See considerations on symmetric keys in Section 13.7. To use symmetric keys, the client instance can send the key by reference (Section 7.1.1) or send the entire client identity by reference (Section 2.3.1).¶

The client instance's key can be pre-registered with the AS ahead of time and associated with a set of policies and allowable actions pertaining to that client. If this pre-registration includes other fields that can occur in the client request object described in this section, such as class_id or display, the pre-registered values MUST take precedence over any values given at runtime. Additional fields sent during a request but not present in a pre-registered client instance record at the AS SHOULD NOT be added to the client's pre-registered record. See additional considerations regarding client instance impersonation in Section 13.15.¶

A client instance that is capable of talking to multiple AS's SHOULD use a different key for each AS to prevent a class of mix-up attacks as described in Section 13.31 unless other mechanisms can be used to assure the identity of the AS for a given request.¶

"client": "client-541-ab"

"display": {
    "name": "My Client Display Name",
    "uri": "https://example.net/client",
    "logo_uri": "data:image/png;base64,Eeww...="
}

2.4. Identifying the User

If the client instance knows the identity of the end user through one or more identifiers or assertions, the client instance MAY send that information to the AS in the "user" field. The client instance MAY pass this information by value or by reference (See Section 2.4.1).¶

sub_ids (array of objects):

An array of subject identifiers for the end user, as defined by [RFC9493]. OPTIONAL.¶

assertions (array of objects)

An array containing assertions as objects each containing the assertion format and the assertion value as the JSON string serialization of the assertion, as defined in Section 3.4. OPTIONAL.¶

"user": {
  "sub_ids": [ {
    "format": "opaque",
    "id": "J2G8G8O4AZ"
  } ],
  "assertions": [ {
    "format": "id_token",
    "value": "eyj..."
  } ]
}

Subject identifiers are hints to the AS in determining the RO and MUST NOT be taken as authoritative statements that a particular RO is present at the client instance and acting as the end user.¶

Assertions presented by the client instance SHOULD be validated by the AS. While the details of such validation are outside the scope of this specification, common validation steps include verifying the signature of the assertion against a trusted signing key, verifying the audience and issuer of the assertion map to expected values, and verifying the time window for the assertion itself. However, note that in many use cases, some of these common steps are relaxed. For example, an AS acting as an identity provider (IdP) could expect that assertions being presented using this mechanism were issued by the AS to the client software. The AS would verify that the AS is the issuer of the assertion, not the audience, and that the client instance is instead the audience of the assertion. Similarly, an AS might accept a recently-expired assertion in order to help bootstrap a new session with a specific end user.¶

If the identified end user does not match the RO present at the AS during an interaction step, and the AS is not explicitly allowing a cross-user authorization, the AS SHOULD reject the request with an unknown_user error (Section 3.6).¶

If the AS trusts the client instance to present verifiable assertions or known subject identifiers, such as an opaque identifier issued by the AS for this specific client instance, the AS MAY decide, based on its policy, to skip interaction with the RO, even if the client instance provides one or more interaction modes in its request.¶

See Section 13.30 for considerations that the AS has to make when accepting and processing assertions from the client instance.¶

"user": "XUT2MFM1XBIKJKSDU8QM"

2.5. Interacting with the User

Often, the AS will require interaction with the RO (Section 4) in order to approve a requested delegation to the client instance for both access to resources and direct subject information. Many times the end user using the client instance is the same person as the RO, and the client instance can directly drive interaction with the end user by facilitating the process through means such as redirection to a URI or launching an application. Other times, the client instance can provide information to start the RO's interaction on a secondary device, or the client instance will wait for the RO to approve the request asynchronously. The client instance could also be signaled that interaction has concluded through a callback mechanism.¶

The client instance declares the parameters for interaction methods that it can support using the interact field.¶

The interact field is a JSON object with three keys whose values declare how the client can initiate and complete the request, as well as provide hints to the AS about user preferences such as locale. A client instance MUST NOT declare an interaction mode it does not support. The client instance MAY send multiple modes in the same request. There is no preference order specified in this request. An AS MAY respond to any, all, or none of the presented interaction modes (Section 3.3) in a request, depending on its capabilities and what is allowed to fulfill the request.¶

start (array of objects/strings):

Indicates how the client instance can start an interaction. REQUIRED. (Section 2.5.1)¶

finish (object):

Indicates how the client instance can receive an indication that interaction has finished at the AS. OPTIONAL. (Section 2.5.2)¶

hints (object):

Provides additional information to inform the interaction process at the AS. OPTIONAL. (Section 2.5.3)¶

In the following non-normative example, the client instance is indicating that it can redirect (Section 2.5.1.1) the end user to an arbitrary URI and can receive a redirect (Section 2.5.2.1) through a browser request. Note that the client instance does not accept a push-style callback. The pattern of using a redirect for both interaction start and finish is common for web-based client software.¶

"interact": {
    "start": ["redirect"],
    "finish": {
        "method": "redirect",
        "uri": "https://client.example.net/return/123455",
        "nonce": "LKLTI25DK82FX4T4QFZC"
    }
}

In the following non-normative example, the client instance is indicating that it can display a user code (Section 2.5.1.3) and direct the end user to an arbitrary URI (Section 2.5.1.1), but it cannot accept a redirect or push callback. This pattern is common for devices with robust display capabilities but that expect the use of a secondary device to facilitate end-user interaction with the AS, such as a set-top box capable of displaying an interaction URL as a QR code.¶

"interact": {
    "start": ["redirect", "user_code"]
}

In the following non-normative example, the client instance is indicating that it can not start any interaction with the end-user, but that the AS can push an interaction finish message (Section 2.5.2.2) when authorization from the RO is received asynchronously. This pattern is common for scenarios where a service needs to be authorized, but the RO is able to be contacted separately from the GNAP transaction itself, such as through a push notification or existing interactive session on a secondary device.¶

"interact": {
    "start": [],
    "finish": {
        "method": "push",
        "uri": "https://client.example.net/return/123455",
        "nonce": "LKLTI25DK82FX4T4QFZC"
    }
}

If the client instance does not provide a suitable interaction mechanism, the AS cannot contact the RO asynchronously, and the AS determines that interaction is required, then the AS MUST return an invalid_interaction error (Section 3.6) since the client instance will be unable to complete the request without authorization.¶

"interact": {
  "start": ["redirect"]
}

"interact": {
  "start": ["app"]
}

"interact": {
    "start": ["user_code"]
}

"interact": {
    "start": ["user_code_uri"]
}

"interact": {
    "finish": {
        "method": "redirect",
        "uri": "https://client.example.net/return/123455",
        "nonce": "LKLTI25DK82FX4T4QFZC"
    }
}

"interact": {
    "finish": {
        "method": "push",
        "uri": "https://client.example.net/return/123455",
        "nonce": "LKLTI25DK82FX4T4QFZC"
    }
}

"interact": {
    "hints": {
        "ui_locales": ["en-US", "fr-CA"]
    }
}

3.1. Request Continuation

If the AS determines that the grant request can be continued by the client instance, the AS responds with the continue field. This field contains a JSON object with the following properties.¶

uri (string):

The URI at which the client instance can make continuation requests. This URI MAY vary per request, or MAY be stable at the AS. This URI MUST be an absolute URI. The client instance MUST use this value exactly as given when making a continuation request (Section 5). REQUIRED.¶

wait (integer):

The amount of time in integer seconds the client instance MUST wait after receiving this request continuation response and calling the continuation URI. The value SHOULD NOT be less than five seconds, and omission of the value MUST be interpreted as five seconds. RECOMMENDED.¶

access_token (object):

A unique access token for continuing the request, called the "continuation access token". The value of this property MUST be an object in the format specified in Section 3.2.1. This access token MUST be bound to the client instance's key used in the request and MUST NOT be a bearer token. As a consequence, the flags array of this access token MUST NOT contain the string bearer and the key field MUST be omitted. This access token MUST NOT have a manage field. The client instance MUST present the continuation access token in all requests to the continuation URI as described in Section 7.2. REQUIRED.¶

{
    "continue": {
        "access_token": {
            "value": "80UPRY5NM33OMUKMKSKU"
        },
        "uri": "https://server.example.com/continue",
        "wait": 60
    }
}

This field is REQUIRED if the grant request is in the pending state, as the field contains the information needed by the client request to continue the request as described in Section 5. Note that the continuation access token is bound to the client instance's key, and therefore the client instance MUST sign all continuation requests with its key as described in Section 7.3 and MUST present the continuation access token in its continuation request.¶

3.2. Access Tokens

If the AS has successfully granted one or more access tokens to the client instance, the AS responds with the access_token field. This field contains either a single access token as described in Section 3.2.1 or an array of access tokens as described in Section 3.2.2.¶

The client instance uses any access tokens in this response to call the RS as described in Section 7.2.¶

The grant request MUST be in the approved state to include this field in the response.¶

NOTE: '\' line wrapping per RFC 8792

"access_token": {
    "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0",
    "manage": {
        "uri": "https://server.example.com/token/PRY5NM33O",
        "access_token": {
            "value": "B8CDFONP21-4TB8N6.BW7ONM"
        }
    },
    "access": [
        {
            "type": "photo-api",
            "actions": [
                "read",
                "write",
                "dolphin"
            ],
            "locations": [
                "https://server.example.net/",
                "https://resource.local/other"
            ],
            "datatypes": [
                "metadata",
                "images"
            ]
        },
        "read", "dolphin-metadata"
    ]
}

"access_token": {
    "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0",
    "flags": ["bearer"],
    "access": [
        "finance", "medical"
    ]
}

NOTE: '\' line wrapping per RFC 8792

"access_token": [
    {
        "label": "token1",
        "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0",
        "manage": {
            "uri": "https://server.example.com/token/PRY5NM33O",
            "access_token": {
                "value": "B8CDFONP21-4TB8N6.BW7ONM"
            }
        },
        "access": [ "finance" ]
    },
    {
        "label": "token2",
        "value": "UFGLO2FDAFG7VGZZPJ3IZEMN21EVU71FHCARP4J1",
        "access": [ "medical" ]
    }
}

"access_token": [
    {
        "label": "token2",
        "value": "8N6BW7OZB8CDFONP219-OS9M2PMHKUR64TBRP1LT0",
        "manage": {
            "uri": "https://server.example.com/token/PRY5NM33O",
            "access_token": {
                "value": "B8CDFONP21-4TB8N6.BW7ONM"
            }
        },
        "access": [ "fruits" ]
    }
]

3.3. Interaction Modes

If the client instance has indicated a capability to interact with the RO in its request (Section 2.5), and the AS has determined that interaction is both supported and necessary, the AS responds to the client instance with any of the following values in the interact field of the response. There is no preference order for interaction modes in the response, and it is up to the client instance to determine which ones to use. All supported interaction methods are included in the same interact object.¶

redirect (string):

Redirect to an arbitrary URI. REQUIRED if the redirect interaction start mode is possible for this request. See Section 3.3.1.¶

app (string):

Launch of an application URI. REQUIRED if the app interaction start mode is possible for this request. See Section 3.3.2.¶

user_code (string):

Display a short user code. REQUIRED if the user_code interaction start mode is possible for this request. See Section 3.3.3.¶

user_code_uri (object):

Display a short user code and URI. REQUIRED if the user_code_uri interaction start mode is possible for this request. Section 3.3.4¶

finish (string):

A unique ASCII string value provided by the AS as a nonce. This is used by the client instance to verify the callback after interaction is completed. REQUIRED if the interaction finish method requested by the client instance is possible for this request. See Section 3.3.5.¶

expires_in (integer):

The number of integer seconds after which this set of interaction responses will expire and no longer be usable by the client instance. If the interaction methods expire, the client MAY re-start the interaction process for this grant request by sending an update (Section 5.3) with a new interaction request (Section 2.5) section. OPTIONAL. If omitted, the interaction response modes returned do not expire but MAY be invalidated by the AS at any time.¶

Additional interaction mode responses can be defined in the GNAP Interaction Mode Responses Registry (Section 11.13).¶

The AS MUST NOT respond with any interaction mode that the client instance did not indicate in its request. The AS MUST NOT respond with any interaction mode that the AS does not support. Since interaction responses include secret or unique information, the AS SHOULD respond to each interaction mode only once in an ongoing request, particularly if the client instance modifies its request (Section 5.3).¶

The grant request MUST be in the pending state to include this field in the response.¶

"interact": {
    "redirect": "https://interact.example.com/4CF492MLVMSW9MKMXKHQ"
}

"interact": {
    "app": "https://app.example.com/launch?tx=4CF492MLV"
}

"interact": {
    "user_code": "A1BC3DFF"
}

"interact": {
    "user_code_uri": {
        "code": "A1BC3DFF",
        "uri": "https://s.example/device"
    }
}

"interact": {
    "finish": "MBDOFXG4Y5CVJCX821LH"
}

3.4. Returning Subject Information

If information about the RO is requested and the AS grants the client instance access to that data, the AS returns the approved information in the "subject" response field. The AS MUST return the subject field only in cases where the AS is sure that the RO and the end user are the same party. This can be accomplished through some forms of interaction with the RO (Section 4).¶

This field is an object with the following properties.¶

sub_ids (array of objects):

An array of subject identifiers for the RO, as defined by [RFC9493]. REQUIRED if returning subject identifiers.¶

assertions (array of objects):

An array containing assertions as objects each containing the assertion object described below. REQUIRED if returning assertions.¶

updated_at (string):

Timestamp as an [RFC3339] date string, indicating when the identified account was last updated. The client instance MAY use this value to determine if it needs to request updated profile information through an identity API. The definition of such an identity API is out of scope for this specification. RECOMMENDED.¶

Assertion objects contain the following fields:¶

format (string):

The assertion format. Possible formats are listed in Section 3.4.1. Additional assertion formats are defined by the GNAP Assertion Formats Registry (Section 11.6). REQUIRED.¶

value (string):

The assertion value as the JSON string serialization of the assertion. REQUIRED.¶

The following non-normative example contains an opaque identifier and an OpenID Connect ID Token:¶

"subject": {
  "sub_ids": [ {
    "format": "opaque",
    "id": "XUT2MFM1XBIKJKSDU8QM"
  } ],
  "assertions": [ {
    "format": "id_token",
    "value": "eyj..."
  } ]
}

Subject identifiers returned by the AS SHOULD uniquely identify the RO at the AS. Some forms of subject identifier are opaque to the client instance (such as the subject of an issuer and subject pair), while others forms (such as email address and phone number) are intended to allow the client instance to correlate the identifier with other account information at the client instance. The client instance MUST NOT request or use any returned subject identifiers for communication purposes (see Section 2.2). That is, a subject identifier returned in the format of an email address or a phone number only identifies the RO to the AS and does not indicate that the AS has validated that the represented email address or phone number in the identifier is suitable for communication with the current user. To get such information, the client instance MUST use an identity protocol to request and receive additional identity claims. The details of an identity protocol and associated schema are outside the scope of this specification.¶

The AS MUST ensure that the returned subject information represents the RO. In most cases, the AS will also ensure that the returned subject information represents the end user authenticated interactively at the AS. The AS SHOULD NOT re-use subject identifiers for multiple different ROs.¶

The "sub_ids" and "assertions" response fields are independent of each other. That is, a returned assertion MAY use a different subject identifier than other assertions and subject identifiers in the response. However, all subject identifiers and assertions returned MUST refer to the same party.¶

The client instance MUST interpret all subject information in the context of the AS from which the subject information is received, as is discussed in Section 6 of [SP80063C]. For example, one AS could return an email identifier of "user@example.com" for one RO, and a different AS could return that same email identifier of "user@example.com" for a completely different RO. A client instance talking to both AS's needs to differentiate between these two accounts by accounting for the AS source of each identifier and not assuming that either has a canonical claim on the identifier without additional configuration and trust agreements. Otherwise, a rogue AS could exploit this to take over a targeted account asserted by a different AS.¶

Extensions to this specification MAY define additional response properties in the GNAP Subject Information Response Fields Registry (Section 11.14).¶

The grant request MUST be in the approved state to return this field in the response.¶

See Section 13.30 for considerations that the client instance has to make when accepting and processing assertions from the AS.¶

3.5. Returning a Dynamically-bound Client Instance Identifier

Many parts of the client instance's request can be passed as either a value or a reference. The use of a reference in place of a value allows for a client instance to optimize requests to the AS.¶

Some references, such as for the client instance's identity (Section 2.3.1) or the requested resources (Section 8.1), can be managed statically through an admin console or developer portal provided by the AS or RS. The developer of the client software can include these values in their code for a more efficient and compact request.¶

If desired, the AS MAY also generate and return an instance identifier dynamically to the client instance in the response to facilitate multiple interactions with the same client instance over time. The client instance SHOULD use this instance identifier in future requests in lieu of sending the associated data values in the client field.¶

Dynamically generated client instance identifiers are string values that MUST be protected by the client instance as secrets. Instance identifier values MUST be unguessable and MUST NOT contain any information that would compromise any party if revealed. Instance identifier values are opaque to the client instance, and their content is determined by the AS. The instance identifier MUST be unique per client instance at the AS.¶

instance_id (string):

A string value used to represent the information in the client object that the client instance can use in a future request, as described in Section 2.3.1. OPTIONAL.¶

The following non-normative example shows an instance identifier along side an issued access token.¶

{
    "instance_id": "7C7C4AZ9KHRS6X63AJAO",
    "access_token": {
        "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0"
    }
}

3.6. Error Response

If the AS determines that the request cannot be completed for any reason, it responds to the client instance with an error field in the response message. This field is either an object or a string.¶

When returned as an object, the object contains the following fields:¶

code (string):

A single ASCII error code defining the error. The value MUST be defined in the GNAP Error Codes Registry (Section 11.15). REQUIRED.¶

description (string):

A human-readable string description of the error intended for the developer of the client. The value is chosen by the implementation. OPTIONAL.¶

This specification defines the following code values:¶

"invalid_request":

The request is missing a required parameter, includes an invalid parameter value or is otherwise malformed.¶

"invalid_client":

The request was made from a client that was not recognized or allowed by the AS, or the client's signature validation failed.¶

"invalid_interaction"

The client instance has provided an interaction reference that is incorrect for this request or the interaction modes in use have expired.¶

"invalid_flag"

The flag configuration is not valid.¶

"invalid_rotation"

The token rotation request is not valid.¶

"key_rotation_not_supported"

The AS does not allow rotation of this access token's key.¶

"invalid_continuation":

The continuation of the referenced grant could not be processed.¶

"user_denied":

The RO denied the request.¶

"request_denied":

The request was denied for an unspecified reason.¶

"unknown_user":

The user presented in the request is not known to the AS or does not match the user present during interaction.¶

"unknown_interaction":

The interaction integrity could not be established.¶

"too_fast":

The client instance did not respect the timeout in the wait response before the next call.¶

"too_many_attempts":

A limit has been reached in the total number of reasonable attempts. This number is either defined statically or adjusted based on runtime conditions by the AS.¶

Additional error codes can be defined in the GNAP Error Codes Registry (Section 11.15).¶

For example, if the RO denied the request while interacting with the AS, the AS would return the following error when the client instance tries to continue the grant request:¶

{
    "error": {
        "code": "user_denied",
        "description": "The RO denied the request"
    }
}

Alternatively, the AS MAY choose to only return the error as codes and provide the error as a string. Since the description field is not intended to be machine-readable, the following response is considered functionally equivalent to the previous example for the purposes of the client software's understanding:¶

{
    "error": "user_denied"
}

If an error state is reached but the grant is in the pending state (and therefore the client instance can continue), the AS MAY include the continue field in the response along with the error, as defined Section 3.1. This allows the client instance to modify its request for access, potentially leading to prompting the RO again. Other fields MUST NOT be included in the response.¶

4.1. Starting Interaction With the End User

When a grant request is in the pending state, the interaction start methods sent by the client instance can be used to facilitate interaction with the end user. To initiate an interaction start method indicated by the interaction start responses (Section 3.3) from the AS, the client instance follows the steps defined by that interaction start mode. The actions of the client instance required for the interaction start modes defined in this specification are described in the following sections. Interaction start modes defined in extensions to this specification MUST define the expected actions of the client software when that interaction start mode is used.¶

If the client instance does not start an interaction start mode within an AS-determined amount of time, the AS MUST reject attempts to use the interaction start modes. If the client instance has already begun one interaction start mode and the interaction has been successfully completed, the AS MUST reject attempts to use other interaction start modes. For example, if a user code has been successfully entered for a grant request, the AS will need to reject requests to an arbitrary redirect URI on the same grant request in order to prevent an attacker from capturing and altering an active authorization process.¶

4.2. Post-Interaction Completion

If an interaction "finish" (Section 3.3.5) method is associated with the current request, the AS MUST follow the appropriate method upon completion of interaction in order to signal the client instance to continue, except for some limited error cases discussed below. If a finish method is not available, the AS SHOULD instruct the RO to return to the client instance upon completion. In such cases, it is expected that the client instance will poll the continuation endpoint as described in Section 5.2.¶

The AS MUST create an interaction reference and associate that reference with the current interaction and the underlying pending request. The interaction reference value is an ASCII string consisting of only unreserved characters per Section 2.3 of [RFC3986]. The interaction reference value MUST be sufficiently random so as not to be guessable by an attacker. The interaction reference MUST be one-time-use to prevent interception and replay attacks.¶

The AS MUST calculate a hash value based on the client instance and AS nonces and the interaction reference, as described in Section 4.2.3. The client instance will use this value to validate the "finish" call.¶

All interaction finish methods MUST define a way to convey the hash and interaction reference back to the client instance. When an interaction finish method is used, the client instance MUST present the interaction reference back to the AS as part of its continuation request (Section 5.1).¶

Note that in many error cases, such as when the RO has denied access, the "finish" method is still enacted by the AS. This pattern allows the client instance to potentially recover from the error state by modifying its request or providing additional information directly to the AS in a continuation request. The AS MUST NOT follow the "finish" method in the following circumstances:¶

• The AS has determined that any URIs involved with the finish method are dangerous or blocked.¶

• The AS cannot determine which ongoing grant request is being referenced.¶

• The ongoing grant request has been cancelled or otherwise blocked.¶

NOTE: '\' line wrapping per RFC 8792

https://client.example.net/return/123455\
  ?hash=x-gguKWTj8rQf7d7i3w3UhzvuJ5bpOlKyAlVpLxBffY\
  &interact_ref=4IFWWIKYBC2PQ6U56NL1

POST /push/554321 HTTP/1.1
Host: client.example.net
Content-Type: application/json

{
  "hash": "pjdHcrti02HLCwGU3qhUZ3wZXt8IjrV_BtE3oUyOuKNk",
  "interact_ref": "4IFWWIKYBC2PQ6U56NL1"
}

VJLO6A4CATR0KRO
MBDOFXG4Y5CVJCX821LH
4IFWWIKYB2PQ6U56NL1
https://server.example.com/tx

x-gguKWTj8rQf7d7i3w3UhzvuJ5bpOlKyAlVpLxBffY

NOTE: '\' line wrapping per RFC 8792

pyUkVJSmpqSJMaDYsk5G8WCvgY91l-agUPe1wgn-cc5rUtN69gPI2-S_s-Eswed8iB4\
  PJ_a5Hg6DNi7qGgKwSQ

5.1. Continuing After a Completed Interaction

When the AS responds to the client instance's finish method as in Section 4.2.1, this response includes an interaction reference. The client instance MUST include that value as the field interact_ref in a POST request to the continuation URI.¶

POST /continue HTTP/1.1
Host: server.example.com
Content-Type: application/json
Authorization: GNAP 80UPRY5NM33OMUKMKSKU
Signature-Input: sig1=...
Signature: sig1=...
Content-Digest: sha-256=...

{
  "interact_ref": "4IFWWIKYBC2PQ6U56NL1"
}

Since the interaction reference is a one-time-use value as described in Section 4.2.1, if the client instance needs to make additional continuation calls after this request, the client instance MUST NOT include the interaction reference in subsequent calls. If the AS detects a client instance submitting an interaction reference when the request is not in the pending state, the AS MUST return a too_many_attempts error (Section 3.6) and SHOULD invalidate the ongoing request by moving it to the finalized state.¶

If the grant request is in the approved state, the grant response (Section 3) MAY contain any newly-created access tokens (Section 3.2) or newly-released subject information (Section 3.4). The response MAY contain a new "continue" response (Section 3.1) as described above. The response SHOULD NOT contain any interaction responses (Section 3.3).¶

If the grant request is in the pending state, the grant response (Section 3) MUST NOT contain access tokens or subject information, and MAY contain a new interaction responses (Section 3.3) to any interaction methods that have not been exhausted at the AS.¶

For example, if the request is successful in causing the AS to issue access tokens and release opaque subject claims, the response could look like this:¶

NOTE: '\' line wrapping per RFC 8792

{
    "access_token": {
        "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0",
        "manage": {
            "uri": "https://server.example.com/token/PRY5NM33O",
            "access_token": {
                "value": "B8CDFONP21-4TB8N6.BW7ONM"
            }
        }
    },
    "subject": {
        "sub_ids": [ {
          "format": "opaque",
          "id": "J2G8G8O4AZ"
        } ]
    }
}

With the above example, the client instance can not make an additional continuation request because a continue field is not included.¶

In the following non-normative example, the RO has denied the client instance's request and the AS responds with the following response:¶

{
    "error": "user_denied",
    "continue": {
        "access_token": {
            "value": "33OMUKMKSKU80UPRY5NM"
        },
        "uri": "https://server.example.com/continue",
        "wait": 30
    }
}

In the preceding example, the AS includes the continue field in the response. Therefore, the client instance can continue the grant negotiation process, perhaps modifying the request as discussed in Section 5.3.¶

5.2. Continuing During Pending Interaction (Polling)

When the client instance does not include a finish parameter, the client instance will often need to poll the AS until the RO has authorized the request. To do so, the client instance makes a POST request to the continuation URI as in Section 5.1, but does not include message content.¶

POST /continue HTTP/1.1
Host: server.example.com
Authorization: GNAP 80UPRY5NM33OMUKMKSKU
Signature-Input: sig1=...
Signature: sig1=...

If the grant request is in the approved state, the grant response (Section 3) MAY contain any newly-created access tokens (Section 3.2) or newly-released subject claims (Section 3.4). The response MAY contain a new "continue" response (Section 3.1) as described above. If a continue field is included, it SHOULD include a wait field to facilitate a reasonable polling rate by the client instance. The response SHOULD NOT contain interaction responses (Section 3.3).¶

If the grant request is in the pending state, the grant response (Section 3) MUST NOT contain access tokens or subject information, and MAY contain a new interaction responses (Section 3.3) to any interaction methods that have not been exhausted at the AS.¶

For example, if the request has not yet been authorized by the RO, the AS could respond by telling the client instance to make another continuation request in the future. In the following non-normative example, a new, unique access token has been issued for the call, which the client instance will use in its next continuation request.¶

{
    "continue": {
        "access_token": {
            "value": "33OMUKMKSKU80UPRY5NM"
        },
        "uri": "https://server.example.com/continue",
        "wait": 30
    }
}

If the request is successful in causing the AS to issue access tokens and release subject information, the response could look like the following non-normative example:¶

NOTE: '\' line wrapping per RFC 8792

{
    "access_token": {
        "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0",
        "manage": {
            "uri": "https://server.example.com/token/PRY5NM33O",
            "access_token": {
                "value": "B8CDFONP21-4TB8N6.BW7ONM"
            }
        }
    },
    "subject": {
        "sub_ids": [ {
          "format": "opaque",
          "id": "J2G8G8O4AZ"
        } ]
    }
}

See Section 13.23 for considerations on polling for continuation without an interaction finish method.¶

In error conditions, the AS responds to the client instance with the error code as discussed in Section 3.6. For example, if the client instance has polled too many times before the RO has approved the request, the AS would respond with a message like the following:¶

{
    "error": "too_many_attempts"
}

Since this response does not include a continue section, the client instance cannot continue to poll the AS for additional updates and the grant request is finalized. If the client instance still needs access to the resource, it will need to start with a new grant request.¶

5.3. Modifying an Existing Request

The client instance might need to modify an ongoing request, whether or not tokens have already been issued or subject information has already been released. In such cases, the client instance makes an HTTP PATCH request to the continuation URI and includes any fields it needs to modify. Fields that aren't included in the request are considered unchanged from the original request.¶

A grant request associated with a modification request MUST be in the approved or pending state. When the AS receives a valid modification request, the AS MUST place the grant request into the processing state and re-evaluate the authorization in the new context created by the update request, since the extent and context of the request could have changed.¶

The client instance MAY include the access_token and subject fields as described in Section 2.1 and Section 2.2. Inclusion of these fields override any values in the initial request, which MAY trigger additional requirements and policies by the AS. For example, if the client instance is asking for more access, the AS could require additional interaction with the RO to gather additional consent. If the client instance is asking for more limited access, the AS could determine that sufficient authorization has been granted to the client instance and return the more limited access rights immediately. If the grant request was previously in the approved state, the AS could decide to remember the larger scale of access rights associated with the grant request, allowing the client instance to make subsequent requests of different subsets of granted access. The details of this processing are out of scope for this specification, but a one possible approach is as follows:¶

1. A client instance requests access to Foo, and is granted by the RO. This results in an access token, AT1.¶

2. The client instance later modifies the grant request to include Foo and Bar together. Since the client instance was previously granted Foo under this grant request, the RO is prompted to allow the client instance access to Foo and Bar together. This results in a new access token, AT2 This access token has access to both Foo and Bar. The rights of the original access token AT1 are not modified.¶

3. The client instance makes another grant modification to ask only for Bar. Since the client instance was previously granted Foo and Bar together under this grant request, the RO is not prompted and the access to Bar is granted in a new access token, AT3. This new access token does not allow access to Foo.¶

4. The original access token AT1 expires and the client seeks a new access token to replace it. The client instance makes another grant modification to ask only for Foo. Since the client instance was previously granted Foo and Bar together under this grant request, the RO is not prompted and the access to Foo is granted in a new access token, AT4. This new access token does not allow access to Bar.¶

All four access tokens are independent of each other and associated with the same underlying grant request. Each of these access tokens could possibly also be rotated using token management, if available. For example, instead of asking for a new token to replace AT1, the client instance could ask for a refresh of AT1 using the rotation method of the token management API. This would result in a refreshed AT1 with a different token value and expiration from the original AT1 but with the same access rights of allowing only access to Foo.¶

The client instance MAY include the interact field as described in Section 2.5. Inclusion of this field indicates that the client instance is capable of driving interaction with the end user, and this field replaces any values from a previous request. The AS MAY respond to any of the interaction responses as described in Section 3.3, just like it would to a new request.¶

The client instance MAY include the user field as described in Section 2.4 to present new assertions or information about the end user. The AS SHOULD check that this presented user information is consistent with any user information previously presented by the client instance or otherwise associated with this grant request.¶

The client instance MUST NOT include the client section of the request, since the client instance is assumed not to have changed. Modification of client instance information, including rotation of keys associated with the client instance, is outside the scope of this specification.¶

The client instance MUST NOT include post-interaction responses such as described in Section 5.1.¶

Modification requests MUST NOT alter previously-issued access tokens. Instead, any access tokens issued from a continuation are considered new, separate access tokens. The AS MAY revoke previously-issued access tokens after a modification has occurred.¶

If the modified request can be granted immediately by the AS (the grant request is in the approved state), the grant response (Section 3) MAY contain any newly-created access tokens (Section 3.2) or newly-released subject claims (Section 3.4). The response MAY contain a new "continue" response (Section 3.1) as described above. If interaction can occur, the response SHOULD contain interaction responses (Section 3.3) as well.¶

For example, a client instance initially requests a set of resources using references:¶

POST /tx HTTP/1.1
Host: server.example.com
Content-Type: application/json
Signature-Input: sig1=...
Signature: sig1=...
Content-Digest: sha-256=...

{
    "access_token": {
        "access": [
            "read", "write"
        ]
    },
    "interact": {
        "start": ["redirect"],
        "finish": {
            "method": "redirect",
            "uri": "https://client.example.net/return/123455",
            "nonce": "LKLTI25DK82FX4T4QFZC"
        }
    },
    "client": "987YHGRT56789IOLK"
}

Access is granted by the RO, and a token is issued by the AS. In its final response, the AS includes a continue field, which includes a separate access token for accessing the continuation API:¶

{
    "continue": {
        "access_token": {
            "value": "80UPRY5NM33OMUKMKSKU"
        },
        "uri": "https://server.example.com/continue",
        "wait": 30
    },
    "access_token": {
        "value": "RP1LT0-OS9M2P_R64TB",
        "access": [
            "read", "write"
        ]
    }
}

This continue field allows the client instance to make an eventual continuation call. Some time later, the client instance realizes that it no longer needs "write" access and therefore modifies its ongoing request, here asking for just "read" access instead of both "read" and "write" as before.¶

PATCH /continue HTTP/1.1
Host: server.example.com
Content-Type: application/json
Authorization: GNAP 80UPRY5NM33OMUKMKSKU
Signature-Input: sig1=...
Signature: sig1=...
Content-Digest: sha-256=...

{
    "access_token": {
        "access": [
            "read"
        ]
    }
    ...
}

The AS replaces the previous access from the first request, allowing the AS to determine if any previously-granted consent already applies. In this case, the AS would determine that reducing the breadth of the requested access means that new access tokens can be issued to the client instance without additional interaction or consent. The AS would likely revoke previously-issued access tokens that had the greater access rights associated with them, unless they had been issued with the durable flag.¶

{
    "continue": {
        "access_token": {
            "value": "M33OMUK80UPRY5NMKSKU"
        },
        "uri": "https://server.example.com/continue",
        "wait": 30
    },
    "access_token": {
        "value": "0EVKC7-2ZKwZM_6N760",
        "access": [
            "read"
        ]
    }
}

For another example, the client instance initially requests read-only access but later needs to step up its access. The initial request could look like the following HTTP message.¶

POST /tx HTTP/1.1
Host: server.example.com
Content-Type: application/json
Signature-Input: sig1=...
Signature: sig1=...
Content-Digest: sha-256=...

{
    "access_token": {
        "access": [
            "read"
        ]
    },
    "interact": {
        "start": ["redirect"],
        "finish": {
            "method": "redirect",
            "uri": "https://client.example.net/return/123455",
            "nonce": "LKLTI25DK82FX4T4QFZC"
        }
    },
    "client": "987YHGRT56789IOLK"
}

Access is granted by the RO, and a token is issued by the AS. In its final response, the AS includes a continue field:¶

{
    "continue": {
        "access_token": {
            "value": "80UPRY5NM33OMUKMKSKU"
        },
        "uri": "https://server.example.com/continue",
        "wait": 30
    },
    "access_token": {
        "value": "RP1LT0-OS9M2P_R64TB",
        "access": [
            "read"
        ]
    }
}

This allows the client instance to make an eventual continuation call. The client instance later realizes that it now needs "write" access in addition to the "read" access. Since this is an expansion of what it asked for previously, the client instance also includes a new interaction section in case the AS needs to interact with the RO again to gather additional authorization. Note that the client instance's nonce and callback are different from the initial request. Since the original callback was already used in the initial exchange, and the callback is intended for one-time-use, a new one needs to be included in order to use the callback again.¶

PATCH /continue HTTP/1.1
Host: server.example.com
Content-Type: application/json
Authorization: GNAP 80UPRY5NM33OMUKMKSKU
Signature-Input: sig1=...
Signature: sig1=...
Content-Digest: sha-256=...

{
    "access_token": {
        "access": [
            "read", "write"
        ]
    },
    "interact": {
        "start": ["redirect"],
        "finish": {
            "method": "redirect",
            "uri": "https://client.example.net/return/654321",
            "nonce": "K82FX4T4LKLTI25DQFZC"
        }
    }
}

From here, the AS can determine that the client instance is asking for more than it was previously granted, but since the client instance has also provided a mechanism to interact with the RO, the AS can use that to gather the additional consent. The protocol continues as it would with a new request. Since the old access tokens are good for a subset of the rights requested here, the AS might decide to not revoke them. However, any access tokens granted after this update process are new access tokens and do not modify the rights of existing access tokens.¶

5.4. Revoking a Grant Request

If the client instance wishes to cancel an ongoing grant request and place it into the finalized state, the client instance makes an HTTP DELETE request to the continuation URI.¶

DELETE /continue HTTP/1.1
Host: server.example.com
Content-Type: application/json
Authorization: GNAP 80UPRY5NM33OMUKMKSKU
Signature-Input: sig1=...
Signature: sig1=...

If the request is successfully revoked, the AS responds with status code HTTP 204 (No Content). The AS SHOULD revoke all associated access tokens, if possible. The AS SHOULD disable all token rotation and other token management functions on such access tokens, if possible. Once the grant request is in the finalized state, it MUST NOT be moved to any other state.¶

If the request is not revoked, the AS responds with an invalid_continuation error (Section 3.6).¶

6.1. Rotating the Access Token Value

If the client instance has an access token and that access token expires, the client instance might want to rotate the access token to a new value without expiration. Rotating an access token consists of issuing a new access token in place of an existing access token, with the same rights and properties as the original token, apart from an updated token value and expiration time.¶

To rotate an access token, the client instance makes an HTTP POST to the token management URI with no message content, sending the access token in the authorization header as described in Section 7.2 and signing the request with the appropriate key.¶

POST /token/PRY5NM33O HTTP/1.1
Host: server.example.com
Authorization: GNAP B8CDFONP21-4TB8N6.BW7ONM
Signature-Input: sig1=...
Signature: sig1=...
Content-Digest: sha-256=...

The client instance can not request to alter the access rights associated with the access token during a rotation request. To get an access token with different access rights for this grant request, the client instance has to call the continuation API's update (Section 5.3) functionality to get a new access token. The client instance can also create a new grant request with the required access rights.¶

The AS validates that the token management access token presented is associated with the management URI, that the AS issued the token to the given client instance, and that the presented key is the correct key for the token management access token. The AS determines which access token is being rotated from the token management URI, the token management access token, or both.¶

If the token is validated and the key is appropriate for the request, the AS MUST invalidate the current access token value associated with this URI, if possible. Note that stateless access tokens can make proactive revocation difficult within a system, see Section 13.32.¶

For successful rotations, the AS responds with an HTTP 200 with a JSON-formatted message content consisting of the rotated access token in the access_token field described in Section 3.2.1. The value of the access token MUST NOT be the same as the current value of the access token used to access the management API. The response MUST include an access token management URI, and the value of this URI MAY be different from the URI used by the client instance to make the rotation call. The client instance MUST use this new URI to manage the rotated access token.¶

The access rights in the access array for the rotated access token MUST be included in the response and MUST be the same as the token before rotation.¶

NOTE: '\' line wrapping per RFC 8792

{
    "access_token": {
        "value": "FP6A8H6HY37MH13CK76LBZ6Y1UADG6VEUPEER5H2",
        "manage": {
            "uri": "https://server.example.com/token/PRY5NM33O",
            "access_token": {
                "value": "B8CDFONP21-4TB8N6.BW7ONM"
            }
        },
        "expires_in": 3600,
        "access": [
            {
                "type": "photo-api",
                "actions": [
                    "read",
                    "write",
                    "dolphin"
                ],
                "locations": [
                    "https://server.example.net/",
                    "https://resource.local/other"
                ],
                "datatypes": [
                    "metadata",
                    "images"
                ]
            },
            "read", "dolphin-metadata"
        ]
    }
}

If the AS is unable or unwilling to rotate the value of the access token, the AS responds with an invalid_rotation error (Section 3.6). Upon receiving such an error, the client instance MUST consider the access token to not have changed its state.¶

POST /token/PRY5NM33O HTTP/1.1
Host: server.example.com
Authorization: GNAP B8CDFONP21-4TB8N6.BW7ONM
Signature-Input: \
  sig1=("@method" "@target-uri" "content-digest" \
        "authorization"),\
  sig2=("@method" "@target-uri" "content-digest" \
        "authorization" "signature";key="sig1" \
        "signature-input";key="sig1")
Signature: sig1=..., sig2=...
Content-Digest: sha-256=...

{
    "key": {
        "proof": "httpsig",
        "jwk": {
            "kty": "RSA",
            "e": "AQAB",
            "kid": "xyz-2",
            "alg": "RS256",
            "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_JtffXyaSx8xY..."
        }
    }
}

6.2. Revoking the Access Token

If the client instance wishes to revoke the access token proactively, such as when a user indicates to the client instance that they no longer wish for it to have access or the client instance application detects that it is being uninstalled, the client instance can use the token management URI to indicate to the AS that the AS SHOULD invalidate the access token for all purposes.¶

The client instance makes an HTTP DELETE request to the token management URI, presenting the access token and signing the request with the appropriate key.¶

DELETE /token/PRY5NM33O HTTP/1.1
Host: server.example.com
Authorization: GNAP B8CDFONP21-4TB8N6.BW7ONM
Signature-Input: sig1=...
Signature: sig1=...

If the key presented is associated with the token (or the client instance, in the case of a bearer token), the AS MUST invalidate the access token, if possible, and return an HTTP 204 response code.¶

204 No Content

Though the AS MAY revoke an access token at any time for any reason, the token management function is specifically for the client instance's use. If the access token has already expired or has been revoked through other means, the AS SHOULD honor the revocation request to the token management URI as valid, since the end result is still the token not being usable.¶

7.1. Key Formats

Several different places in GNAP require the presentation of key material by value or by reference. Key material sent by value is sent using a JSON object with several fields described in this section.¶

All keys are associated with a specific key proofing method. The proofing method associated with the key is indicated using the proof field of the key object.¶

proof (string or object):

The form of proof that the client instance will use when presenting the key. The valid values of this field and the processing requirements for each are detailed in Section 7.3. REQUIRED.¶

A key presented by value MUST be a public key and MUST be presented in one and only one supported format, as discussed in Section 13.35. Note that while most formats present the full value of the public key, some formats present a value cryptographically derived from the public key. See additional discussion of the presentation of public keys in Section 13.7.¶

jwk (object):

The public key and its properties represented as a JSON Web Key [RFC7517]. A JWK MUST contain the alg (Algorithm) and kid (Key ID) parameters. The alg parameter MUST NOT be "none". The x5c (X.509 Certificate Chain) parameter MAY be used to provide the X.509 representation of the provided public key. OPTIONAL.¶

cert (string):

PEM serialized value of the certificate used to sign the request, with optional internal whitespace per [RFC7468]. The PEM header and footer are optionally removed. OPTIONAL.¶

cert#S256 (string):

The certificate thumbprint calculated as per OAuth-MTLS [RFC8705] in base64 URL encoding. Note that this format does not include the full public key. OPTIONAL.¶

Additional key formats are defined in the GNAP Key Formats Registry (Section 11.17).¶

The following non-normative example shows a single key presented in two different formats. The example key is intended to be used with the HTTP Message Signatures (Section 7.3.1) proofing mechanism, as indicated by the httpsig value of the proof field.¶

As a JSON Web Key:¶

"key": {
    "proof": "httpsig",
    "jwk": {
        "kty": "RSA",
        "e": "AQAB",
        "kid": "xyz-1",
        "alg": "RS256",
        "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_JtffXyaSx8xY..."
    }
}

As a certificate in PEM format:¶

"key": {
    "proof": "httpsig",
    "cert": "MIIEHDCCAwSgAwIBAgIBATANBgkqhkiG9w0BAQsFA..."
}

When the key is presented in GNAP, proof of this key material MUST be used to bind the request, the nature of which varies with the location in the protocol the key is used. For a key used as part of a client instance's initial request in Section 2.3, the key value represents the client instance's public key, and proof of that key MUST be presented in that request. For a key used as part of an access token response in Section 3.2.1, the proof of that key MUST be used when the client instance later presents the access token to the RS.¶

    "key": "S-P4XJQ_RYJCRTSU1.63N3E"

7.2. Presenting Access Tokens

Access tokens are issued to client instances in GNAP to allow the client instance to make an authorized call to an API. The method the client instance uses to send an access token depends on whether the token is bound to a key, and if so which proofing method is associated with the key. This information is conveyed by the key parameter and the bearer flag in the access token response structure (Section 3.2.1).¶

If the flags field does not contain the bearer flag and the key is absent, the access token MUST be sent using the same key and proofing mechanism that the client instance used in its initial request (or its most recent rotation).¶

If the flags field does not contain the bearer flag and the key value is an object as described in Section 7.1, the access token MUST be sent using the key and proofing mechanism defined by the value of the proof field within the key object.¶

The access token MUST be sent using the HTTP "Authorization" request header field and the "GNAP" authorization scheme along with a key proof as described in Section 7.3 for the key bound to the access token. For example, an access token bound using HTTP Message Signatures would be sent as follows:¶

NOTE: '\' line wrapping per RFC 8792

GET /stuff HTTP/1.1
Host: resource.example.com
Authorization: GNAP 80UPRY5NM33OMUKMKSKU
Signature-Input: sig1=("@method" "@target-uri" "authorization")\
  ;created=1618884473;keyid="gnap-rsa";nonce="NAOEJF12ER2";tag="gnap"
Signature: sig1=:FQ+EjWqc38uLFByKa5y+c4WyYYwCTGUhidWKfr5L1Cha8FiPEw\
  DxG7nWttpBLS/B6VLfkZJogPbclySs9MDIsAIJwHnzlcJjwXWR2lfvm2z3X7EkJHm\
  Zp4SmyKOS34luAiKR1xwf32NYFolHmZf/SbHZJuWvQuS4U33C+BbsXz8MflFH1Dht\
  H/C1E5i244gSbdLCPxzABc/Q0NHVSLo1qaouYIvnxXB8OT3K7mwWjsLh1GC5vFThb\
  3XQ363r6f0OPRa4qWHhubR/d/J/lNOjbBdjq9AJ69oqNJ+A2XT+ZCrVasEJE0OBvD\
  auQoiywhb8BMB7+PEINsPk5/8UvaNxbw==:

If the flags field contains the bearer flag, the access token is a bearer token that MUST be sent using the Authorization Request Header Field method defined in [RFC6750].¶

Authorization: Bearer OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0

The Form-Encoded Body Parameter and URI Query Parameter methods of [RFC6750] MUST NOT be used for GNAP access tokens.¶

7.3. Proving Possession of a Key with a Request

Any keys presented by the client instance to the AS or RS MUST be validated as part of the request in which they are presented. The type of binding used is indicated by the proof parameter of the key object in Section 7.1. Key proof methods are specified either by a string, which consists of the key proof method name on its own, or by a JSON object with the required field method:¶

method:

The name of the key proofing method to be used. REQUIRED.¶

Individual methods defined as objects MAY define additional parameters as members in this object.¶

Values for the method defined by this specification are as follows:¶

"httpsig" (string or object):

HTTP Signing signature headers. See Section 7.3.1.¶

"mtls" (string):

Mutual TLS certificate verification. See Section 7.3.2.¶

"jwsd" (string):

A detached JWS signature header. See Section 7.3.3.¶

"jws" (string):

Attached JWS payload. See Section 7.3.4.¶

Additional proofing methods are defined by the GNAP Key Proofing Methods Registry (Section 11.16).¶

Proof methods MAY be defined as both an object and a string. For example, the httpsig method can be specified as an object with its parameters explicitly declared, such as:¶

{
    "proof": {
        "method": "httpsig",
        "alg": "ecdsa-p384-sha384",
        "content-digest-alg": "sha-256"
    }
}

The httpsig method also defines default behavior when it is passed as a string form, using the signature algorithm specified by the associated key material and the content digest is calculated using sha-256. This configuration can be selected using the following shortened form:¶

{
    "proof": "httpsig"
}

All key binding methods used by this specification MUST cover all relevant portions of the request, including anything that would change the nature of the request, to allow for secure validation of the request. Relevant aspects include the URI being called, the HTTP method being used, any relevant HTTP headers and values, and the HTTP message content itself. The verifier of the signed message MUST validate all components of the signed message to ensure that nothing has been tampered with or substituted in a way that would change the nature of the request. Key binding method definitions MUST enumerate how these requirements are fulfilled.¶

When a key proofing mechanism is bound to an access token, the key being presented MUST be the key associated with the access token and the access token MUST be covered by the signature method of the proofing mechanism.¶

The key binding methods in this section MAY be used by other components making calls as part of GNAP, such as the extensions allowing the RS to make calls to the AS defined in [I-D.ietf-gnap-resource-servers]. To facilitate this extended use, the sections below are defined in generic terms of the "signer" and "verifier" of the HTTP message. In the core functions of GNAP specified in this document, the "signer" is the client instance and the "verifier" is the AS (for grant requests) or RS (for resource requests), as appropriate.¶

When used for delegation in GNAP, these key binding mechanisms allow the AS to ensure that the keys presented by the client instance in the initial request are in control of the party calling any follow-up or continuation requests. To facilitate this requirement, the continuation response (Section 3.1) includes an access token bound to the client instance's key (Section 2.3), and that key (or its most recent rotation) MUST be proved in all continuation requests (Section 5). Token management requests (Section 6) are similarly bound to either the access token's own key or, in the case of bearer tokens, the client instance's key.¶

In the following sections, unless otherwise noted, the RS256 JOSE Signature Algorithm (defined in Section 3.3 of [RFC7518]) is applied using the following RSA key (presented here in JWK format):¶

NOTE: '\' line wrapping per RFC 8792

{
    "kid": "gnap-rsa",
    "p": "xS4-YbQ0SgrsmcA7xDzZKuVNxJe3pCYwdAe6efSy4hdDgF9-vhC5gjaRk\
        i1wWuERSMW4Tv44l5HNrL-Bbj_nCJxr_HAOaesDiPn2PnywwEfg3Nv95Nn-\
        eilhqXRaW-tJKEMjDHu_fmJBeemHNZI412gBnXdGzDVo22dvYoxd6GM",
    "kty": "RSA",
    "q": "rVdcT_uy-CD0GKVLGpEGRR7k4JO6Tktc8MEHkC6NIFXihk_6vAIOCzCD6\
        LMovMinOYttpRndKoGTNdJfWlDFDScAs8C5n2y1STCQPRximBY-bw39-aZq\
        JXMxOLyPjzuVgiTOCBIvLD6-8-mvFjXZk_eefD0at6mQ5qV3U1jZt88",
    "d": "FHlhdTF0ozTliDxMBffT6aJVKZKmbbFJOVNten9c3lXKB3ux3NAb_D2dB\
        7inp9EV23oWrDspFtvCvD9dZrXgRKMHofkEpo_SSvBZfgtH-OTkbY_TqtPF\
        FLPKAw0JX5cFPnn4Q2xE4n-dQ7tpRCKl59vZLHBrHShr90zqzFp0AKXU5fj\
        b1gC9LPwsFA2Fd7KXmI1drQQEVq9R-o18Pnn4BGQNQNjO_VkcJTiBmEIVT_\
        KJRPdpVJAmbgnYWafL_hAfeb_dK8p85yurEVF8nCK5oO3EPrqB7IL4UqaEn\
        5Sl3u0j8x5or-xrrAoNz-gdOv7ONfZY6NFoa-3f8q9wBAHUuQ",
    "e": "AQAB",
    "qi": "ogpNEkDKg22Rj9cDV_-PJBZaXMk66Fp557RT1tafIuqJRHEufSOYnsto\
        bWPJ0gHxv1gVJw3gm-zYvV-wTMNgr2wVsBSezSJjPSjxWZtmT2z68W1DuvK\
        kZy15vz7Jd85hmDlriGcXNCoFEUsGLWkpHH9RwPIzguUHWmTt8y0oXyI",
    "dp": "dvCKGI2G7RLh3WyjoJ_Dr6hZ3LhXweB3YcY3qdD9BnxZ71mrLiMQg4c_\
        EBnwqCETN_5sStn2cRc2JXnvLP3G8t7IFKHTT_i_TSTacJ7uT04MSa053Y3\
        RfwbvLjRNPR0UKAE3ZxROUoIaVNuU_6-QMf8-2ilUv2GIOrCN87gP_Vk",
    "alg": "RS256",
    "dq": "iMZmELaKgT9_W_MRT-UfDWtTLeFjIGRW8aFeVmZk9R7Pnyt8rNzyN-IQ\
        M40ql8u8J6vc2GmQGfokLlPQ6XLSCY68_xkTXrhoU1f-eDntkhP7L6XawSK\
        Onv5F2H7wyBQ75HUmHTg8AK2B_vRlMyFKjXbVlzKf4kvqChSGEz4IjQ",
    "n": "hYOJ-XOKISdMMShn_G4W9m20mT0VWtQBsmBBkI2cmRt4Ai8BfYdHsFzAt\
        YKOjpBR1RpKpJmVKxIGNy0g6Z3ad2XYsh8KowlyVy8IkZ8NMwSrcUIBZGYX\
        jHpwjzvfGvXH_5KJlnR3_uRUp4Z4Ujk2bCaKegDn11V2vxE41hqaPUnhRZx\
        e0jRETddzsE3mu1SK8dTCROjwUl14mUNo8iTrTm4n0qDadz8BkPo-uv4BC0\
        bunS0K3bA_3UgVp7zBlQFoFnLTO2uWp_muLEWGl67gBq9MO3brKXfGhi3kO\
        zywzwPTuq-cVQDyEN7aL0SxCb3Hc4IdqDaMg8qHUyObpPitDQ"
}

Key proofing methods SHOULD define a mechanism to allow the rotation of keys discussed in Section 6.1.1. Key rotation mechanisms MUST define a way for presenting proof of two keys simultaneously with the following attributes:¶

• The value of or reference to the new key material MUST be signed by the existing key. Generally speaking, this amounts to using the existing key to sign the content of the message which contains the new key.¶

• The signature of the old key MUST be signed by the new key. Generally speaking, this means including the signature value of the old key under the coverage of the new key.¶

{
    "proof": {
        "method": "httpsig",
        "alg": "ecdsa-p384-sha384",
        "content-digest-alg": "sha-512"
    }
}

{
    "proof": "httpsig"
}

NOTE: '\' line wrapping per RFC 8792

{
    "access_token": {
        "access": [
            "dolphin-metadata"
        ]
    },
    "interact": {
        "start": ["redirect"],
        "finish": {
            "method": "redirect",
            "uri": "https://client.foo/callback",
            "nonce": "VJLO6A4CAYLBXHTR0KRO"
        }
    },
    "client": {
      "key": {
        "proof": "httpsig",
        "jwk": {
            "kid": "gnap-rsa",
            "kty": "RSA",
            "e": "AQAB",
            "alg": "PS512",
            "n": "hYOJ-XOKISdMMShn_G4W9m20mT0VWtQBsmBBkI2cmRt4Ai8Bf\
  YdHsFzAtYKOjpBR1RpKpJmVKxIGNy0g6Z3ad2XYsh8KowlyVy8IkZ8NMwSrcUIBZG\
  YXjHpwjzvfGvXH_5KJlnR3_uRUp4Z4Ujk2bCaKegDn11V2vxE41hqaPUnhRZxe0jR\
  ETddzsE3mu1SK8dTCROjwUl14mUNo8iTrTm4n0qDadz8BkPo-uv4BC0bunS0K3bA_\
  3UgVp7zBlQFoFnLTO2uWp_muLEWGl67gBq9MO3brKXfGhi3kOzywzwPTuq-cVQDyE\
  N7aL0SxCb3Hc4IdqDaMg8qHUyObpPitDQ"
        }
      }
      "display": {
        "name": "My Client Display Name",
        "uri": "https://client.foo/"
      },
    }
}

sha-256=:q2XBmzRDCREcS2nWo/6LYwYyjrlN1bRfv+HKLbeGAGg=:

NOTE: '\' line wrapping per RFC 8792

"@method": POST
"@target-uri": https://server.example.com/gnap
"content-digest": \
  sha-256=:q2XBmzRDCREcS2nWo/6LYwYyjrlN1bRfv+HKLbeGAGg=:
"content-length": 988
"content-type": application/json
"@signature-params": ("@method" "@target-uri" "content-digest" \
  "content-length" "content-type");created=1618884473\
  ;keyid="gnap-rsa";nonce="NAOEJF12ER2";tag="gnap"

NOTE: '\' line wrapping per RFC 8792

POST /gnap HTTP/1.1
Host: server.example.com
Content-Type: application/json
Content-Length: 988
Content-Digest: sha-256=:q2XBmzRDCREcS2nWo/6LYwYyjrlN1bRfv+HKLbeGAG\
  g=:
Signature-Input: sig1=("@method" "@target-uri" "content-digest" \
  "content-length" "content-type");created=1618884473\
  ;keyid="gnap-rsa";nonce="NAOEJF12ER2";tag="gnap"
Signature: sig1=:c2uwTa6ok3iHZsaRKl1ediKlgd5cCAYztbym68XgX8gSOgK0Bt\
  +zLJ19oGjSAHDjJxX2gXP2iR6lh9bLMTfPzbFVn4Eh+5UlceP+0Z5mES7v0R1+eHe\
  OqBl0YlYKaSQ11YT7n+cwPnCSdv/6+62m5zwXEEftnBeA1ECorfTuPtau/yrTYEvD\
  9A/JqR2h9VzAE17kSlSSsDHYA6ohsFqcRJavX29duPZDfYgkZa76u7hJ23yVxoUpu\
  2J+7VUdedN/72N3u3/z2dC8vQXbzCPTOiLru12lb6vnBZoDbUGsRR/zHPauxhj9T+\
  218o5+tgwYXw17othJSxIIOZ9PkIgz4g==:

{
    "access_token": {
        "access": [
            "dolphin-metadata"
        ]
    },
    "interact": {
        "start": ["redirect"],
        "finish": {
            "method": "redirect",
            "uri": "https://client.foo/callback",
            "nonce": "VJLO6A4CAYLBXHTR0KRO"
        }
    },
    "client": {
      "key": {
        "proof": "httpsig",
        "jwk": {
            "kid": "gnap-rsa",
            "kty": "RSA",
            "e": "AQAB",
            "alg": "PS512",
            "n": "hYOJ-XOKISdMMShn_G4W9m20mT0VWtQBsmBBkI2cmRt4Ai8Bf\
  YdHsFzAtYKOjpBR1RpKpJmVKxIGNy0g6Z3ad2XYsh8KowlyVy8IkZ8NMwSrcUIBZG\
  YXjHpwjzvfGvXH_5KJlnR3_uRUp4Z4Ujk2bCaKegDn11V2vxE41hqaPUnhRZxe0jR\
  ETddzsE3mu1SK8dTCROjwUl14mUNo8iTrTm4n0qDadz8BkPo-uv4BC0bunS0K3bA_\
  3UgVp7zBlQFoFnLTO2uWp_muLEWGl67gBq9MO3brKXfGhi3kOzywzwPTuq-cVQDyE\
  N7aL0SxCb3Hc4IdqDaMg8qHUyObpPitDQ"
        }
      }
      "display": {
        "name": "My Client Display Name",
        "uri": "https://client.foo/"
      },
    }
}

NOTE: '\' line wrapping per RFC 8792

POST /token/PRY5NM33 HTTP/1.1
Host: server.example.com
Authorization: GNAP 4398.34-12-asvDa.a
Content-Digest: sha-512=:Fb/A5vnawhuuJ5xk2RjGrbbxr6cvinZqd4+JPY85u/\
  JNyTlmRmCOtyVhZ1Oz/cSS4tsYen6fzpCwizy6UQxNBQ==:
Signature-Input: old-key=("@method" "@target-uri" "content-digest" \
  "authorization");created=1618884475;keyid="test-key-ecc-p256"\
  ;tag="gnap"
Signature: old-key=:vN4IKYsJl2RLFe+tYEm4dHM4R4BToqx5D2FfH4ge5WOkgxo\
  dI2QRrjB8rysvoSEGvAfiVJOWsGcPD1lU639Amw==:

{
    "key": {
        "proof": "httpsig",
        "jwk": {
            "kty": "RSA",
            "e": "AQAB",
            "kid": "xyz-2",
            "alg": "RS256",
            "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_JtffXyaSx8xY..."
        }
    }
}

NOTE: '\' line wrapping per RFC 8792

"@method": POST
"@target-uri": https://server.example.com/token/PRY5NM33
"content-digest": sha-512=:Fb/A5vnawhuuJ5xk2RjGrbbxr6cvinZqd4+JPY85\
  u/JNyTlmRmCOtyVhZ1Oz/cSS4tsYen6fzpCwizy6UQxNBQ==:
"authorization": GNAP 4398.34-12-asvDa.a
"signature";key="old-key": :YdDJjDn2Sq8FR82e5IcOLWmmf6wILoswlnRcz+n\
  M+e8xjFDpWS2YmiMYDqUdri2UiJsZx63T1z7As9Kl6HTGkQ==:
"signature-input";key="old-key": ("@method" "@target-uri" \
  "content-digest" "authorization");created=1618884475\
  ;keyid="test-key-ecc-p256";tag="gnap"
"@signature-params": ("@method" "@target-uri" "content-digest" \
  "authorization" "signature";key="old-key" "signature-input"\
  ;key="old-key");created=1618884480;keyid="xyz-2"
  ;tag="gnap-rotate"

NOTE: '\' line wrapping per RFC 8792

POST /token/PRY5NM33 HTTP/1.1
Host: server.example.com
Authorization: GNAP 4398.34-12-asvDa.a
Content-Digest: sha-512=:Fb/A5vnawhuuJ5xk2RjGrbbxr6cvinZqd4+JPY85u/\
  JNyTlmRmCOtyVhZ1Oz/cSS4tsYen6fzpCwizy6UQxNBQ==:
Signature-Input: old-key=("@method" "@target-uri" "content-digest" \
    "authorization");created=1618884475;keyid="test-key-ecc-p256"\
    ;tag="gnap", \
  new-key=("@method" "@target-uri" "content-digest" \
    "authorization" "signature";key="old-key" "signature-input"\
    ;key="old-key");created=1618884480;keyid="xyz-2"
    ;tag="gnap-rotate"
Signature: old-key=:vN4IKYsJl2RLFe+tYEm4dHM4R4BToqx5D2FfH4ge5WOkgxo\
    dI2QRrjB8rysvoSEGvAfiVJOWsGcPD1lU639Amw==:, \
  new-key=:VWUExXQ0geWeTUKhCfDT7WJyT++OHSVbfPA1ukW0o7mmstdbvIz9iOuH\
    DRFzRBm0MQPFVMpLDFXQdE3vi2SL3ZjzcX2qLwzAtyRB9+RsV2caAA80A5ZGMoo\
    gUsKPk4FFDN7KRUZ0vT9Mo9ycx9Dq/996TOWtAmq5z0YUYEwwn+T6+NcW8rFtms\
    s1ZfXG0EoAfV6ve25p+x40Y1rvDHsfkakTRB4J8jWVDybSe39tjIKQBo3uicDVw\
    twewBMNidIa+66iF3pWj8w9RSb0cncEgvbkHgASqaZeXmxxG4gM8p1HH9v/OqQT\
    Oggm5gTWmCQs4oxEmWsfTOxefunfh3X+Qw==:

{
    "key": {
        "proof": "httpsig",
        "jwk": {
            "kty": "RSA",
            "e": "AQAB",
            "kid": "xyz-2",
            "alg": "RS256",
            "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_JtffXyaSx8xY..."
        }
    }
}

{
    "proof": "mtls"
}

POST /gnap HTTP/1.1
Host: server.example.com
Content-Type: application/jose
Content-Length: 1567
Client-Cert: \
  :MIIC6jCCAdKgAwIBAgIGAXjw74xPMA0GCSqGSIb3DQEBCwUAMDYxNDAyBgNVBAMM\
  K05JWU15QmpzRGp5QkM5UDUzN0Q2SVR6a3BEOE50UmppOXlhcEV6QzY2bVEwHhcN\
  MjEwNDIwMjAxODU0WhcNMjIwMjE0MjAxODU0WjA2MTQwMgYDVQQDDCtOSVlNeUJq\
  c0RqeUJDOVA1MzdENklUemtwRDhOdFJqaTl5YXBFekM2Nm1RMIIBIjANBgkqhkiG\
  9w0BAQEFAAOCAQ8AMIIBCgKCAQEAhYOJ+XOKISdMMShn/G4W9m20mT0VWtQBsmBB\
  kI2cmRt4Ai8BfYdHsFzAtYKOjpBR1RpKpJmVKxIGNy0g6Z3ad2XYsh8KowlyVy8I\
  kZ8NMwSrcUIBZGYXjHpwjzvfGvXH/5KJlnR3/uRUp4Z4Ujk2bCaKegDn11V2vxE4\
  1hqaPUnhRZxe0jRETddzsE3mu1SK8dTCROjwUl14mUNo8iTrTm4n0qDadz8BkPo+\
  uv4BC0bunS0K3bA/3UgVp7zBlQFoFnLTO2uWp/muLEWGl67gBq9MO3brKXfGhi3k\
  OzywzwPTuq+cVQDyEN7aL0SxCb3Hc4IdqDaMg8qHUyObpPitDQIDAQABMA0GCSqG\
  SIb3DQEBCwUAA4IBAQBnYFK0eYHy+hVf2D58usj39lhL5znb/q9G35GBd/XsWfCE\
  wHuLOSZSUmG71bZtrOcx0ptle9bp2kKl4HlSTTfbtpuG5onSa3swRNhtKtUy5NH9\
  W/FLViKWfoPS3kwoEpC1XqKY6l7evoTCtS+kTQRSrCe4vbNprCAZRxz6z1nEeCgu\
  NMk38yTRvx8ihZpVOuU+Ih+dOtVe/ex5IAPYxlQsvtfhsUZqc7IyCcy72WHnRHlU\
  fn3pJm0S5270+Yls3Iv6h3oBAP19i906UjiUTNH3g0xMW+V4uLxgyckt4wD4Mlyv\
  jnaQ7Z3sR6EsXMocAbXHIAJhwKdtU/fLgdwL5vtx:


{
    "access_token": {
        "access": [
            "dolphin-metadata"
        ]
    },
    "interact": {
        "start": ["redirect"],
        "finish": {
            "method": "redirect",
            "uri": "https://client.foo/callback",
            "nonce": "VJLO6A4CAYLBXHTR0KRO"
        }
    },
    "client": {
      "key": {
        "proof": "mtls",
        "cert": "MIIC6jCCAdKgAwIBAgIGAXjw74xPMA0GCSqGSIb3DQEBCwUAMD\
  YxNDAyBgNVBAMMK05JWU15QmpzRGp5QkM5UDUzN0Q2SVR6a3BEOE50UmppOXlhcEV\
  6QzY2bVEwHhcNMjEwNDIwMjAxODU0WhcNMjIwMjE0MjAxODU0WjA2MTQwMgYDVQQD\
  DCtOSVlNeUJqc0RqeUJDOVA1MzdENklUemtwRDhOdFJqaTl5YXBFekM2Nm1RMIIBI\
  jANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAhYOJ+XOKISdMMShn/G4W9m20mT\
  0VWtQBsmBBkI2cmRt4Ai8BfYdHsFzAtYKOjpBR1RpKpJmVKxIGNy0g6Z3ad2XYsh8\
  KowlyVy8IkZ8NMwSrcUIBZGYXjHpwjzvfGvXH/5KJlnR3/uRUp4Z4Ujk2bCaKegDn\
  11V2vxE41hqaPUnhRZxe0jRETddzsE3mu1SK8dTCROjwUl14mUNo8iTrTm4n0qDad\
  z8BkPo+uv4BC0bunS0K3bA/3UgVp7zBlQFoFnLTO2uWp/muLEWGl67gBq9MO3brKX\
  fGhi3kOzywzwPTuq+cVQDyEN7aL0SxCb3Hc4IdqDaMg8qHUyObpPitDQIDAQABMA0\
  GCSqGSIb3DQEBCwUAA4IBAQBnYFK0eYHy+hVf2D58usj39lhL5znb/q9G35GBd/Xs\
  WfCEwHuLOSZSUmG71bZtrOcx0ptle9bp2kKl4HlSTTfbtpuG5onSa3swRNhtKtUy5\
  NH9W/FLViKWfoPS3kwoEpC1XqKY6l7evoTCtS+kTQRSrCe4vbNprCAZRxz6z1nEeC\
  guNMk38yTRvx8ihZpVOuU+Ih+dOtVe/ex5IAPYxlQsvtfhsUZqc7IyCcy72WHnRHl\
  Ufn3pJm0S5270+Yls3Iv6h3oBAP19i906UjiUTNH3g0xMW+V4uLxgyckt4wD4Mlyv\
  jnaQ7Z3sR6EsXMocAbXHIAJhwKdtU/fLgdwL5vtx"
      }
      "display": {
        "name": "My Client Display Name",
        "uri": "https://client.foo/"
      },
    },
    "subject": {
        "formats": ["iss_sub", "opaque"]
    }
}

{
    "proof": "jwsd"
}

{
    "alg": "RS256",
    "kid": "gnap-rsa",
    "uri": "https://server.example.com/gnap",
    "htm": "POST",
    "typ": "gnap-binding-jwsd",
    "created": 1618884475
}

NOTE: '\' line wrapping per RFC 8792

{
    "access_token": {
        "access": [
            "dolphin-metadata"
        ]
    },
    "interact": {
        "start": ["redirect"],
        "finish": {
            "method": "redirect",
            "uri": "https://client.foo/callback",
            "nonce": "VJLO6A4CAYLBXHTR0KRO"
        }
    },
    "client": {
      "key": {
        "proof": "jwsd",
        "jwk": {
            "kid": "gnap-rsa",
            "kty": "RSA",
            "e": "AQAB",
            "alg": "RS256",
            "n": "hYOJ-XOKISdMMShn_G4W9m20mT0VWtQBsmBBkI2cmRt4Ai8Bf\
  YdHsFzAtYKOjpBR1RpKpJmVKxIGNy0g6Z3ad2XYsh8KowlyVy8IkZ8NMwSrcUIBZG\
  YXjHpwjzvfGvXH_5KJlnR3_uRUp4Z4Ujk2bCaKegDn11V2vxE41hqaPUnhRZxe0jR\
  ETddzsE3mu1SK8dTCROjwUl14mUNo8iTrTm4n0qDadz8BkPo-uv4BC0bunS0K3bA_\
  3UgVp7zBlQFoFnLTO2uWp_muLEWGl67gBq9MO3brKXfGhi3kOzywzwPTuq-cVQDyE\
  N7aL0SxCb3Hc4IdqDaMg8qHUyObpPitDQ"
        }
      }
      "display": {
        "name": "My Client Display Name",
        "uri": "https://client.foo/"
      },
    }
}

PGiVuOZUcN1tRtUS6tx2b4cBgw9mPgXG3IPB3wY7ctc

NOTE: '\' line wrapping per RFC 8792

POST /gnap HTTP/1.1
Host: server.example.com
Content-Type: application/json
Content-Length: 983
Detached-JWS: eyJhbGciOiJSUzI1NiIsImNyZWF0ZWQiOjE2MTg4ODQ0NzUsImh0b\
  SI6IlBPU1QiLCJraWQiOiJnbmFwLXJzYSIsInR5cCI6ImduYXAtYmluZGluZytqd3\
  NkIiwidXJpIjoiaHR0cHM6Ly9zZXJ2ZXIuZXhhbXBsZS5jb20vZ25hcCJ9.PGiVuO\
  ZUcN1tRtUS6tx2b4cBgw9mPgXG3IPB3wY7ctc.fUq-SV-A1iFN2MwCRW_yolVtT2_\
  TZA2h5YeXUoi5F2Q2iToC0Tc4drYFOSHIX68knd68RUA7yHqCVP-ZQEd6aL32H69e\
  9zuMiw6O_s4TBKB3vDOvwrhYtDH6fX2hP70cQoO-47OwbqP-ifkrvI3hVgMX9TfjV\
  eKNwnhoNnw3vbu7SNKeqJEbbwZfpESaGepS52xNBlDNMYBQQXxM9OqKJaXffzLFEl\
  -Xe0UnfolVtBraz3aPrPy1C6a4uT7wLda3PaTOVtgysxzii3oJWpuz0WP5kRujzDF\
  wX_EOzW0jsjCSkL-PXaKSpZgEjNjKDMg9irSxUISt1C1T6q3SzRgfuQ


{
    "access_token": {
        "access": [
            "dolphin-metadata"
        ]
    },
    "interact": {
        "start": ["redirect"],
        "finish": {
            "method": "redirect",
            "uri": "https://client.foo/callback",
            "nonce": "VJLO6A4CAYLBXHTR0KRO"
        }
    },
    "client": {
      "key": {
        "proof": "jwsd",
        "jwk": {
            "kid": "gnap-rsa",
            "kty": "RSA",
            "e": "AQAB",
            "alg": "RS256",
            "n": "hYOJ-XOKISdMMShn_G4W9m20mT0VWtQBsmBBkI2cmRt4Ai8Bf\
  YdHsFzAtYKOjpBR1RpKpJmVKxIGNy0g6Z3ad2XYsh8KowlyVy8IkZ8NMwSrcUIBZG\
  YXjHpwjzvfGvXH_5KJlnR3_uRUp4Z4Ujk2bCaKegDn11V2vxE41hqaPUnhRZxe0jR\
  ETddzsE3mu1SK8dTCROjwUl14mUNo8iTrTm4n0qDadz8BkPo-uv4BC0bunS0K3bA_\
  3UgVp7zBlQFoFnLTO2uWp_muLEWGl67gBq9MO3brKXfGhi3kOzywzwPTuq-cVQDyE\
  N7aL0SxCb3Hc4IdqDaMg8qHUyObpPitDQ"
        }
      }
      "display": {
        "name": "My Client Display Name",
        "uri": "https://client.foo/"
      },
    }
}

{
    "proof": "jws"
}

{
    "alg": "RS256",
    "kid": "gnap-rsa",
    "uri": "https://server.example.com/gnap",
    "htm": "POST",
    "typ": "gnap-binding-jws",
    "created": 1618884475
}

NOTE: '\' line wrapping per RFC 8792

{
    "access_token": {
        "access": [
            "dolphin-metadata"
        ]
    },
    "interact": {
        "start": ["redirect"],
        "finish": {
            "method": "redirect",
            "uri": "https://client.foo/callback",
            "nonce": "VJLO6A4CAYLBXHTR0KRO"
        }
    },
    "client": {
      "key": {
        "proof": "jws",
        "jwk": {
            "kid": "gnap-rsa",
            "kty": "RSA",
            "e": "AQAB",
            "alg": "RS256",
            "n": "hYOJ-XOKISdMMShn_G4W9m20mT0VWtQBsmBBkI2cmRt4Ai8Bf\
  YdHsFzAtYKOjpBR1RpKpJmVKxIGNy0g6Z3ad2XYsh8KowlyVy8IkZ8NMwSrcUIBZG\
  YXjHpwjzvfGvXH_5KJlnR3_uRUp4Z4Ujk2bCaKegDn11V2vxE41hqaPUnhRZxe0jR\
  ETddzsE3mu1SK8dTCROjwUl14mUNo8iTrTm4n0qDadz8BkPo-uv4BC0bunS0K3bA_\
  3UgVp7zBlQFoFnLTO2uWp_muLEWGl67gBq9MO3brKXfGhi3kOzywzwPTuq-cVQDyE\
  N7aL0SxCb3Hc4IdqDaMg8qHUyObpPitDQ"
        }
      }
      "display": {
        "name": "My Client Display Name",
        "uri": "https://client.foo/"
      },
    },
    "subject": {
        "formats": ["iss_sub", "opaque"]
    }
}

NOTE: '\' line wrapping per RFC 8792

POST /gnap HTTP/1.1
Host: server.example.com
Content-Type: application/jose
Content-Length: 1047

eyJhbGciOiJSUzI1NiIsImNyZWF0ZWQiOjE2MTg4ODQ0NzUsImh0bSI6IlBPU1QiLCJ\
raWQiOiJnbmFwLXJzYSIsInR5cCI6ImduYXAtYmluZGluZytqd3NkIiwidXJpIjoiaH\
R0cHM6Ly9zZXJ2ZXIuZXhhbXBsZS5jb20vZ25hcCJ9.CnsKICAgICJhY2Nlc3NfdG9r\
ZW4iOiB7CiAgICAgICAgImFjY2VzcyI6IFsKICAgICAgICAgICAgImRvbHBoaW4tbWV\
0YWRhdGEiCiAgICAgICAgXQogICAgfSwKICAgICJpbnRlcmFjdCI6IHsKICAgICAgIC\
Aic3RhcnQiOiBbInJlZGlyZWN0Il0sCiAgICAgICAgImZpbmlzaCI6IHsKICAgICAgI\
CAgICAgIm1ldGhvZCI6ICJyZWRpcmVjdCIsCiAgICAgICAgICAgICJ1cmkiOiAiaHR0\
cHM6Ly9jbGllbnQuZm9vL2NhbGxiYWNrIiwKICAgICAgICAgICAgIm5vbmNlIjogIlZ\
KTE82QTRDQVlMQlhIVFIwS1JPIgogICAgICAgIH0KICAgIH0sCiAgICAiY2xpZW50Ij\
ogewogICAgICAicHJvb2YiOiAiandzIiwKICAgICAgImtleSI6IHsKICAgICAgICAia\
ndrIjogewogICAgICAgICAgICAia2lkIjogImduYXAtcnNhIiwKICAgICAgICAgICAg\
Imt0eSI6ICJSU0EiLAogICAgICAgICAgICAiZSI6ICJBUUFCIiwKICAgICAgICAgICA\
gImFsZyI6ICJSUzI1NiIsCiAgICAgICAgICAgICJuIjogImhZT0otWE9LSVNkTU1TaG\
5fRzRXOW0yMG1UMFZXdFFCc21CQmtJMmNtUnQ0QWk4QmZZZEhzRnpBdFlLT2pwQlIxU\
nBLcEptVkt4SUdOeTBnNlozYWQyWFlzaDhLb3dseVZ5OElrWjhOTXdTcmNVSUJaR1lY\
akhwd2p6dmZHdlhIXzVLSmxuUjNfdVJVcDRaNFVqazJiQ2FLZWdEbjExVjJ2eEU0MWh\
xYVBVbmhSWnhlMGpSRVRkZHpzRTNtdTFTSzhkVENST2p3VWwxNG1VTm84aVRyVG00bj\
BxRGFkejhCa1BvLXV2NEJDMGJ1blMwSzNiQV8zVWdWcDd6QmxRRm9GbkxUTzJ1V3Bfb\
XVMRVdHbDY3Z0JxOU1PM2JyS1hmR2hpM2tPenl3endQVHVxLWNWUUR5RU43YUwwU3hD\
YjNIYzRJZHFEYU1nOHFIVXlPYnBQaXREUSIKICAgICAgICB9CiAgICAgIH0KICAgICA\
gImRpc3BsYXkiOiB7CiAgICAgICAgIm5hbWUiOiAiTXkgQ2xpZW50IERpc3BsYXkgTm\
FtZSIsCiAgICAgICAgInVyaSI6ICJodHRwczovL2NsaWVudC5mb28vIgogICAgICB9L\
AogICAgfSwKICAgICJzdWJqZWN0IjogewogICAgICAgICJmb3JtYXRzIjogWyJpc3Nf\
c3ViIiwgIm9wYXF1ZSJdCiAgICB9Cn0K.MwNoVMQp5hVxI0mCs9LlOUdFtkDXaA1_eT\
vOXq7DOGrtDKH7q4vP2xUq3fH2jRAZqnobo0WdPP3eM3NH5QUjW8pa6_QpwdIWkK7r-\
u_52puE0lPBp7J4U2w4l9gIbg8iknsmWmXeY5F6wiGT8ptfuEYGgmloAJd9LIeNvD3U\
LW2h2dz1Pn2eDnbyvgB0Ugae0BoZB4f69fKWj8Z9wvTIjk1LZJN1PcL7_zT8Lrlic9a\
PyzT7Q9ovkd1s-4whE7TrnGUzFc5mgWUn_gsOpsP5mIIljoEEv-FqOW2RyNYulOZl0Q\
8EnnDHV_vPzrHlUarbGg4YffgtwkQhdK72-JOxYQ

8.1. Requesting Resources By Reference

Instead of sending an object describing the requested resource (Section 8), access rights MAY be communicated as a string known to the AS representing the access being requested. Just like access rights communicated as an object, access rights communicated as reference strings indicate a specific access at a protected resource. In the following non-normative example, three distinct resource access rights are being requested.¶

"access": [
    "read", "dolphin-metadata", "some other thing"
]

This value is opaque to the client instance and MAY be any valid JSON string, and therefore could include spaces, unicode characters, and properly escaped string sequences. However, in some situations the value is intended to be seen and understood by the client software's developer. In such cases, the API designer choosing any such human-readable strings SHOULD take steps to ensure the string values are not easily confused by a developer, such as by limiting the strings to easily disambiguated characters.¶

This functionality is similar in practice to OAuth 2.0's scope parameter [RFC6749], where a single string represents the set of access rights requested by the client instance. As such, the reference string could contain any valid OAuth 2.0 scope value as in Appendix C.5. Note that the reference string here is not bound to the same character restrictions as in OAuth 2.0's scope definition.¶

A single access array MAY include both object-type and string-type resource items. In this non-normative example, the client instance is requesting access to a photo-api and financial-transaction API type as well as the reference values of read, dolphin-metadata, and some other thing.¶

"access": [
    {
        "type": "photo-api",
        "actions": [
            "read",
            "write",
            "delete"
        ],
        "locations": [
            "https://server.example.net/",
            "https://resource.local/other"
        ],
        "datatypes": [
            "metadata",
            "images"
        ]
    },
    "read",
    "dolphin-metadata",
    {
        "type": "financial-transaction",
        "actions": [
            "withdraw"
        ],
        "identifier": "account-14-32-32-3",
        "currency": "USD"
    },
    "some other thing"
]

The requested access is the union of all elements of the array, including both objects and reference strings.¶

In order to facilitate the use of both object and reference strings to access the same kind of APIs, the API designer can define a clear mapping between these forms. One possible approach for choosing reference string values is to use the same value as the type parameter from the fully-specified object, with the API defining a set of default behaviors in this case. For example, an API definition could declare the following string:¶

"access": [
    "photo-api"
]

As being equivalent to the following fully-defined object:¶

"access": [
    {
        "type": "photo-api",
        "actions": [ "read", "write", "delete" ],
        "datatypes": [ "metadata", "image" ]
    }
]

The exact mechanisms for relating reference strings is up to the API designer. These are enforced by the AS, and the details are out of scope for this specification.¶

9.1. RS-first Method of AS Discovery

If the client instance calls an RS without an access token, or with an invalid access token, the RS SHOULD be explicit about the fact that GNAP needs to be used to access the resource by responding with the WWW-Authenticate header field and a GNAP challenge.¶

In some situations, the client instance might want to know with which specific AS it needs to negotiate for access to that RS. The RS MAY additionally return the following OPTIONAL parameters:¶

as_uri:

The URI of the grant endpoint of the GNAP AS. Used by the client instance to call the AS to request an access token.¶

referrer:

The URI of the GNAP RS. Sent by the client instance in the Referer header as part of the grant request.¶

access:

An opaque access reference as defined in Section 8.1. MUST be sufficient for at least the action the client instance was attempting to take at the RS and MAY allow additional access rights as well. Sent by the client as an access right in the grant request.¶

The client instance SHOULD then use both the referrer and access parameters in its access token request. The client instance MUST check that the referrer parameter is equal to the URI of the RS using the simple string comparison method in Section 6.2.1 of [RFC3986].¶

The means for the RS to determine the value for the access reference are out of scope of this specification, but some dynamic methods are discussed in [I-D.ietf-gnap-resource-servers].¶

When receiving the following response from the RS:¶

NOTE: '\' line wrapping per RFC 8792

WWW-Authenticate: \
  GNAP as_uri=https://as.example/tx\
  ;access=FWWIKYBQ6U56NL1\
  ;referrer=https://rs.example

The client instance then makes a request to the as_uri as described in Section 2, with the value of referrer passed as an HTTP Referer header field and the access reference passed unchanged into the access array in the access_token portion of the request. The client instance MAY request additional resources and other information.¶

In the following non-normative example, the client instance is requesting a single access token using the opaque access reference FWWIKYBQ6U56NL1 received from the RS in addition to the dolphin-metadata that the client instance has been configured with out of band.¶

POST /tx HTTP/1.1
Host: as.example
Referer: https://rs.example/resource
Content-Type: application/json
Signature-Input: sig1=...
Signature: sig1=...
Content-Digest: sha-256=...

{
    "access_token": {
        "access": [
            "FWWIKYBQ6U56NL1",
            "dolphin-metadata"
        ]
    },
    "client": "KHRS6X63AJ7C7C4AZ9AO"
}

The client instance includes the Referer header field as a way for the AS to know that the process is initiated through a discovery process at the RS.¶

If issued, the resulting access token would contain sufficient access to be used at both referenced resources.¶

Security considerations, especially related to the potential of a compromised RS (Section 13.37) redirecting the requests of an otherwise properly authenticated client, need to be carefully considered when allowing such a discovery process. This risk can be mitigated by an alternative pre-registration process so that the client knows which AS protects which RS. There are also privacy considerations related to revealing which AS is protecting a given resource, discussed in Section 14.4.1.¶

9.2. Dynamic grant endpoint discovery

Additional methods of discovering the appropriate grant endpoint for a given application are outside the scope of this specification. This limitation is intentional, as many applications rely on static configuration between the client instance and AS, as is common in OAuth 2.0. However, the dynamic nature of GNAP makes it a prime candidate for other extensions defining methods for discovery of the appropriate AS grant endpoint at runtime. Advanced use cases could define contextual methods for contextually providing this endpoint to the client instance securely. Furthermore, GNAP's design intentionally requires the client instance to only know the grant endpoint and not additional parameters, since other functions and values can be disclosed and negotiated during the grant process.¶

11.1. HTTP Authentication Scheme Registration

This specification requests registration of the following scheme in the "Hypertext Transfer Protocol (HTTP) Authentication Scheme Registry" defined be Section 18.5 of [HTTP]:¶

• Authentication Scheme Name: GNAP¶

• Reference: Section 7.2 of RFC nnnn¶

11.2. Media Type Registration

This section requests registration of the following media types [RFC2046] in the "Media Types" registry [IANA.MediaTypes] in the manner described in [RFC6838].¶

To indicate that the content is a GNAP message to be bound with a detached JWS mechanism:¶

• Type name: application¶

• Subtype name: gnap-binding-jwsd¶

• Required parameters: n/a¶

• Optional parameters: n/a¶

• Encoding considerations: binary¶

• Security considerations: See Section 13 of RFC nnnn¶

• Interoperability considerations: n/a¶

• Published specification: RFC nnnn¶

• Applications that use this media type: GNAP¶

• Fragment identifier considerations: n/a¶

• Additional information:¶

  • Magic number(s): n/a¶

  • File extension(s): n/a¶

  • Macintosh file type code(s): n/a¶

• Person & email address to contact for further information: IETF GNAP Working Group, txauth@ietf.org¶

• Intended usage: COMMON¶

• Restrictions on usage: none¶

• Author: IETF GNAP Working Group, txauth@ietf.org¶

• Change Controller: IETF¶

• Provisional registration? No¶

To indicate that the content is a GNAP message to be bound with an attached JWS mechanism:¶

• Type name: application¶

• Subtype name: gnap-binding-jws¶

• Required parameters: n/a¶

• Optional parameters: n/a¶

• Encoding considerations: binary¶

• Security considerations: See Section 13 of RFC nnnn¶

• Interoperability considerations: n/a¶

• Published specification: RFC nnnn¶

• Applications that use this media type: GNAP¶

• Fragment identifier considerations: n/a¶

• Additional information:¶

  • Magic number(s): n/a¶

  • File extension(s): n/a¶

  • Macintosh file type code(s): n/a¶

• Person & email address to contact for further information: IETF GNAP Working Group, txauth@ietf.org¶

• Intended usage: COMMON¶

• Restrictions on usage: none¶

• Author: IETF GNAP Working Group, txauth@ietf.org¶

• Change Controller: IETF¶

• Provisional registration? No¶

To indicate that the content is a GNAP token rotation message to be bound with a detached JWS mechanism:¶

• Type name: application¶

• Subtype name: gnap-binding-rotation-jwsd¶

• Required parameters: n/a¶

• Optional parameters: n/a¶

• Encoding considerations: binary¶

• Security considerations: See Section 13 of RFC nnnn¶

• Interoperability considerations: n/a¶

• Published specification: RFC nnnn¶

• Applications that use this media type: GNAP¶

• Fragment identifier considerations: n/a¶

• Additional information:¶

  • Magic number(s): n/a¶

  • File extension(s): n/a¶

  • Macintosh file type code(s): n/a¶

• Person & email address to contact for further information: IETF GNAP Working Group, txauth@ietf.org¶

• Intended usage: COMMON¶

• Restrictions on usage: none¶

• Author: IETF GNAP Working Group, txauth@ietf.org¶

• Change Controller: IETF¶

• Provisional registration? No¶

To indicate that the content is a GNAP token rotation message to be bound with an attached JWS mechanism:¶

• Type name: application¶

• Subtype name: gnap-binding-rotation-jws¶

• Required parameters: n/a¶

• Optional parameters: n/a¶

• Encoding considerations: binary¶

• Security considerations: See Section 13 of RFC nnnn¶

• Interoperability considerations: n/a¶

• Published specification: RFC nnnn¶

• Applications that use this media type: GNAP¶

• Fragment identifier considerations: n/a¶

• Additional information:¶

  • Magic number(s): n/a¶

  • File extension(s): n/a¶

  • Macintosh file type code(s): n/a¶

• Person & email address to contact for further information: IETF GNAP Working Group, txauth@ietf.org¶

• Intended usage: COMMON¶

• Restrictions on usage: none¶

• Author: IETF GNAP Working Group, txauth@ietf.org¶

• Change Controller: IETF¶

• Provisional registration? No¶

11.3. GNAP Grant Request Parameters

This document defines a GNAP grant request, for which IANA is asked to create and maintain a new registry titled "GNAP Grant Request Parameters". Initial values for this registry are given in Section 11.3.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The Designated Expert (DE) is expected to ensure that all registrations follow the template presented in Section 11.3.1. The DE is expected to ensure that the request parameter's definition is sufficiently orthogonal to existing functionality provided by existing parameters. The DE is expected to ensure that registrations for the same name with different types are sufficiently close in functionality so as not to cause confusion for developers. The DE is expected to ensure that the request parameter's definition specifies the expected behavior of the AS in response to the request parameter for each potential state of the grant request.¶

11.4. GNAP Access Token Flags

This document defines a GNAP access token flags, for which IANA is asked to create and maintain a new registry titled "GNAP Access Token Flags". Initial values for this registry are given in Section 11.4.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The DE is expected to ensure that all registrations follow the template presented in Section 11.4.1. The DE is expected to ensure that the flag specifies whether it applies to requests for tokens to the AS, responses with tokens from the AS, or both.¶

11.5. GNAP Subject Information Request Fields

This document defines a means to request subject information from the AS to the client instance, for which IANA is asked to create and maintain a new registry titled "GNAP Subject Information Request Fields". Initial values for this registry are given in Section 11.5.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The DE is expected to ensure that all registrations follow the template presented in Section 11.5.1. The DE is expected to ensure that registrations for the same name with different types are sufficiently close in functionality so as not to cause confusion for developers.¶

11.6. GNAP Assertion Formats

This document defines a means to pass identity assertions between the AS and client instance, for which IANA is asked to create and maintain a new registry titled "GNAP Assertion Formats". Initial values for this registry are given in Section 11.6.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The DE is expected to ensure that all registrations follow the template presented in Section 11.6.1. The DE is expected to ensure that the definition specifies the serialization format of the assertion value as used within GNAP.¶

11.7. GNAP Client Instance Fields

This document defines a means to send information about the client instance, for which IANA is asked to create and maintain a new registry titled "GNAP Client Instance Fields". Initial values for this registry are given in Section 11.7.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The DE is expected to ensure that all registrations follow the template presented in Section 11.7.1. The DE is expected to ensure that registrations for the same name with different types are sufficiently close in functionality so as not to cause confusion for developers.¶

11.8. GNAP Client Instance Display Fields

This document defines a means to send end-user facing displayable information about the client instance, for which IANA is asked to create and maintain a new registry titled "GNAP Client Instance Display Fields". Initial values for this registry are given in Section 11.8.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The DE is expected to ensure that all registrations follow the template presented in Section 11.8.1. The DE is expected to ensure that registrations for the same name with different types are sufficiently close in functionality so as not to cause confusion for developers.¶

11.9. GNAP Interaction Start Modes

This document defines a means for the client instance to begin interaction between the end-user and the AS, for which IANA is asked to create and maintain a new registry titled "GNAP Interaction Start Modes". Initial values for this registry are given in Section 11.9.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The DE is expected to ensure that all registrations follow the template presented in Section 11.9.1. The DE is expected to ensure that registrations for the same name with different types are sufficiently close in functionality so as not to cause confusion for developers. The DE is expected to ensure that any registration using an "object" type declares all additional parameters, their optionality, and purpose. The DE is expected to ensure that the start mode clearly defines what actions the client is expected to take to begin interaction, what the expected user experience is, and any security considerations for this communication from either party. The DE is expected to ensure that the start mode documents incompatibilities with other start modes or finish methods, if applicable. The DE is expected to ensure that the start mode provides enough information to uniquely identify the grant request during the interaction. For example, tn the redirect and app modes, this is done using a unique URI (including its parameters). In the user_code and user_code_uri mode, this is done using the value of the user code.¶

11.10. GNAP Interaction Finish Methods

This document defines a means for the client instance to be notified of the end of interaction between the end-user and the AS, for which IANA is asked to create and maintain a new registry titled "GNAP Interaction Finish Methods". Initial values for this registry are given in Section 11.10.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The DE is expected to ensure that all registrations follow the template presented in Section 11.10.1. The DE is expected to ensure that all finish methods clearly define what actions the AS is expected to take, what listening methods the client instance needs to enable, and any security considerations for this communication from either party. The DE is expected to ensure that all finish methods document incompatibilities with any start modes, if applicable.¶

11.11. GNAP Interaction Hints

This document defines a set of hints that a client instance can provide to the AS to facilitate interaction with the end user, for which IANA is asked to create and maintain a new registry titled "GNAP Interaction Hints". Initial values for this registry are given in Section 11.11.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The DE is expected to ensure that all registrations follow the template presented in Section 11.11.1. The DE is expected to ensure that all interaction hints clearly document the expected behaviors of the AS in response to the hint, and that an AS not processing the hint does not impede the operation of the AS or client instance.¶

11.12. GNAP Grant Response Parameters

This document defines a GNAP grant response, for which IANA is asked to create and maintain a new registry titled "GNAP Grant Response Parameters". Initial values for this registry are given in Section 11.12.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The DE is expected to ensure that all registrations follow the template presented in Section 11.12.1. The DE is expected to ensure that the response parameter's definition is sufficiently orthogonal to existing functionality provided by existing parameters. The DE is expected to ensure that registrations for the same name with different types are sufficiently close in functionality so as not to cause confusion for developers. The DE is expected to ensure that the response parameter's definition specifies grant states for which the client instance can expect this parameter to appear in a response message.¶

11.13. GNAP Interaction Mode Responses

This document defines a means for the AS to provide to the client instance information that is required to complete a particular interaction mode, for which IANA is asked to create and maintain a new registry titled "GNAP Interaction Mode Responses". Initial values for this registry are given in Section 11.13.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The DE is expected to ensure that all registrations follow the template presented in Section 11.13.1. If the name of the registration matches the name of an interaction start mode, the DE is expected to ensure that the response parameter is unambiguously associated with the interaction start mode of the same name.¶

11.14. GNAP Subject Information Response Fields

This document defines a means to return subject information from the AS to the client instance, for which IANA is asked to create and maintain a new registry titled "GNAP Subject Information Response Fields". Initial values for this registry are given in Section 11.14.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The DE is expected to ensure that all registrations follow the template presented in Section 11.14.1. The DE is expected to ensure that registrations for the same name with different types are sufficiently close in functionality so as not to cause confusion for developers.¶

11.15. GNAP Error Codes

This document defines a set of errors that the AS can return to the client instance, for which IANA is asked to create and maintain a new registry titled "GNAP Error Codes". Initial values for this registry are given in Section 11.15.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The DE is expected to ensure that all registrations follow the template presented in Section 11.15.1. The DE is expected to ensure that the error response is sufficiently unique from other errors to provide actionable information to the client instance. The DE is expected to ensure that the definition of the error response specifies all conditions in which the error response is returned, and what the client instance's expected action is.¶

11.16. GNAP Key Proofing Methods

This document defines methods that the client instance can use to prove possession of a key, for which IANA is asked to create and maintain a new registry titled "GNAP Key Proofing Methods". Initial values for this registry are given in Section 11.16.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The DE is expected to ensure that all registrations follow the template presented in Section 11.16.1. The DE is expected to ensure that registrations for the same name with different types are sufficiently close in functionality so as not to cause confusion for developers. The DE is expected to ensure that the proofing method provides sufficient coverage of and binding to the protocol messages to which it is applied. The DE is expected to ensure that the proofing method definition clearly enumerates how all requirements in Section 7.3 are fulfilled by the definition.¶

11.17. GNAP Key Formats

This document defines formats for a public key value, for which IANA is asked to create and maintain a new registry titled "GNAP Key Formats". Initial values for this registry are given in Section 11.17.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The DE is expected to ensure that all registrations follow the template presented in Section 11.17.1. The DE is expected to ensure the key format specifies the structure and serialization of the key material.¶

11.18. GNAP Authorization Server Discovery Fields

This document defines a discovery document for an AS, for which IANA is asked to create and maintain a new registry titled "GNAP Authorization Server Discovery Fields". Initial values for this registry are given in Section 11.18.2. Future assignments and modifications to existing assignment are to be made through the Specification Required registration policy [RFC8126].¶

The DE is expected to ensure that all registrations follow the template presented in Section 11.18.1. The DE is expected to ensure that registrations for the same name with different types are sufficiently close in functionality so as not to cause confusion for developers. The DE is expected to ensure that the values in the discovery document are sufficient to provide optimization and hints to the client instance, but that knowledge of the discovered value is not required for starting a transaction with the AS.¶

13.1. TLS Protection in Transit

All requests in GNAP made over untrusted network connections have to be made over TLS as outlined in [BCP195] to protect the contents of the request and response from manipulation and interception by an attacker. This includes all requests from a client instance to the AS, all requests from the client instance to an RS, and any requests back to a client instance such as the push-based interaction finish method. Additionally, all requests between a browser and other components, such as during redirect-based interaction, need to be made over TLS or use equivalent protection such as a network connection local to the browser ("localhost").¶

Even though requests from the client instance to the AS are signed, the signature method alone does not protect the request from interception by an attacker. TLS protects the response as well as the request, preventing an attacker from intercepting requested information as it is returned. This is particularly important in the core protocol for security artifacts such as nonces and for personal information such as subject information.¶

The use of key-bound access tokens does not negate the requirement for protecting calls to the RS with TLS. While the keys and signatures associated a bound access token will prevent an attacker from using a stolen token, without TLS an attacker would be able to watch the data being sent to the RS and returned from the RS during legitimate use of the client instance under attack. Additionally, without TLS an attacker would be able to profile the calls made between the client instance and RS, possibly gaining information about the functioning of the API between the client software and RS software that would be otherwise unknown to the attacker.¶

Note that connections from the end user and RO's browser also need to be be protected with TLS. This applies during initial redirects to an AS's components during interaction, during any interaction with the resource owner, and during any redirect back to the client instance. Without TLS protection on these portions of the process, an attacker could wait for a valid request to start and then take over the resource owner's interaction session.¶

13.2. Signing Requests from the Client Software

Even though all requests in GNAP need to be transmitted over TLS or its equivalent, the use of TLS alone is not sufficient to protect all parts of a multi-party and multi-stage protocol like GNAP, and TLS is not targeted at tying multiple requests to each other over time. To account for this, GNAP makes use of message-level protection and key presentation mechanisms that strongly associate a request with a key held by the client instance (see Section 7).¶

During the initial request from a client instance to the AS, the client instance has to identify and prove possession of a cryptographic key. If the key is known to the AS, such as if it is previously registered or dereferenceable to a trusted source, the AS can associate a set of policies to the client instance identified by the key. Without the requirement that the client instance prove that it holds that key, the AS could not trust that the connection came from any particular client and could not apply any associated policies.¶

Even more importantly, the client instance proving possession of a key on the first request allows the AS to associate future requests with each other by binding all future requests in that transaction to the same key. The access token used for grant continuation is bound to the same key and proofing mechanism used by the client instance in its initial request, which means that the client instance needs to prove possession of that same key in future requests allowing the AS to be sure that the same client instance is executing the follow-ups for a given ongoing grant request. Therefore, the AS has to ensure that all subsequent requests for a grant are associated with the same key that started the grant, or the most recent rotation of that key. This need holds true even if the initial key is previously unknown to the AS, such as would be the case when a client instance creates an ephemeral key for its request. Without this ongoing association, an attacker would be able to impersonate a client instance in the midst of a grant request, potentially stealing access tokens and subject information with impunity.¶

Additionally, all access tokens in GNAP default to be associated with the key that was presented during the grant request that created the access token. This association allows an RS to know that the presenter of the access token is the same party that the token was issued to, as identified by their keys. While non-bound bearer tokens are an option in GNAP, these types of tokens have their own tradeoffs discussed in Section 13.9.¶

TLS functions at the transport layer, ensuring that only the parties on either end of that connection can read the information passed along that connection. Each time a new connection is made, such as for a new HTTP request, a new trust is re-established that is mostly unrelated to previous connections. While modern TLS does make use of session resumption, this still needs to be augmented with authentication methods to determine the identity of parties on the connections. In other words, it is not possible with TLS alone to know that the same party is making a set of calls over time, since each time a new TLS connection is established, both the client and the server (or the server only when using Section 7.3.2) have to validate the other party's identity. Such a verification can be achieved via methods described in [RFC9525], but these are not enough to establish the identity of the client instance in many cases.¶

To counter this, GNAP defines a set of key binding methods in Section 7.3 that allow authentication and proof of possession by the caller, which is usually the client instance. These methods are intended to be used in addition to TLS on all connections.¶

13.3. MTLS Message Integrity

The MTLS key proofing mechanism (Section 7.3.2) provides a means for a client instance to present a key using a certificate at the TLS layer. Since TLS protects the entire HTTP message in transit, verification of the TLS client certificate presented with the message provides a sufficient binding between the two. However, since TLS is functioning at a separate layer from HTTP, there is no direct connection between the TLS key presentation and the message itself, other than the fact that the message was presented over the TLS channel. That is to say, any HTTP message can be presented over the TLS channel in question with the same level of trust. The verifier is responsible for ensuring the key in the TLS client certificate is the one expected for a particular request. For example, if the request is a grant request (Section 2), the AS needs to compare the TLS client certificate presented at the TLS layer to the key identified in the request content itself (either by value or through a referenced identifier).¶

Furthermore, the prevalence of the TLS-terminating reverse proxy (TTRP) pattern in deployments adds a wrinkle to the situation. In this common pattern, the TTRP validates the TLS connection and then forwards the HTTP message contents onward to an internal system for processing. The system processing the HTTP message no longer has access to the original TLS connection's information and context. To compensate for this, the TTRP could inject the TLS client certificate into the forwarded request as a header parameter using [RFC9111], giving the downstream system access to the certificate information. The TTRP has to be trusted to provide accurate certificate information, and the connection between the TTRP and the downstream system also has to be protected. The TTRP could provide some additional assurance, for example, by adding its own signature to the Client-Cert header field using [RFC9421]. This signature would be effectively ignored by GNAP (since it would not use GNAP's tag parameter value) but would be understood by the downstream service as part of its deployment.¶

Additional considerations for different types of deployment patterns and key distribution mechanisms for MTLS are found in Section 13.4.¶

13.4. MTLS Deployment Patterns

GNAP does not specify how a client instance's keys could be made known to the AS ahead of time. Public Key Infrastructure (PKI) can be used to manage the keys used by client instances when calling the AS, allowing the AS to trust a root key from a trusted authority. This method is particularly relevant to the MTLS key proofing method, where the client instance presents its certificate to the AS as part of the TLS connection. An AS using PKI to validate the MTLS connection would need to ensure that the presented certificate was issued by a trusted certificate authority before allowing the connection to continue. PKI-based certificates would allow a key to be revoked and rotated through management at the certificate authority without requiring additional registration or management at the AS. The PKI required to manage mutually-authenticated TLS has historically been difficult to deploy, especially at scale, but it remains an appropriate solution for systems where the required management overhead is not an impediment.¶

MTLS in GNAP need not use a PKI backing, as self-signed certificates and certificates from untrusted authorities can still be presented as part of a TLS connection. In this case, the verifier would validate the connection but accept whatever certificate was presented by the client software. This specific certificate can then be bound to all future connections from that client software by being bound to the resulting access tokens, in a trust-on-first-use pattern. See Section 13.3 for more considerations on MTLS as a key proofing mechanism.¶

13.5. Protection of Client Instance Key Material

Client instances are identified by their unique keys, and anyone with access to a client instance's key material will be able to impersonate that client instance to all parties. This is true for both calls to the AS as well as calls to an RS using an access token bound to the client instance's unique key. As a consequence, it is of utmost importance for a client instance to protect its private key material.¶

Different types of client software have different methods for creating, managing, and registering keys. GNAP explicitly allows for ephemeral clients such as single-page applications (SPAs) and single-user clients (such as mobile applications) to create and present their own keys during the initial grant request without any explicit pre-registration step. The client software can securely generate a keypair on-device and present the public key, along with proof of holding the associated private key, to the AS as part of the initial request. To facilitate trust in these ephemeral keys, GNAP further allows for an extensible set of client information to be passed with the request. This information can include device posture and third-party attestations of the client software's provenance and authenticity, depending on the needs and capabilities of the client software and its deployment.¶

From GNAP's perspective, each distinct key is a different client instance. However, multiple client instances can be grouped together by an AS policy and treated similarly to each other. For instance, if an AS knows of several different keys for different servers within a cluster, the AS can decide that authorization of one of these servers applies to all other servers within the cluster. An AS that chooses to do this needs to be careful with how it groups different client keys together in its policy, since the breach of one instance would have direct effects on the others in the cluster.¶

Additionally, if an end user controls multiple instances of a single type of client software, such as having an application installed on multiple devices, each of these instances is expected to have a separate key and be issued separate access tokens. However, if the AS is able to group these separate instances together as described above, it can streamline the authorization process for new instances of the same client software. For example, if two client instances can present proof of a valid installation of a piece of client software, the AS would be able to associate the approval of the first instance of this software to all related instances. The AS could then choose to bypass an explicit prompt of the resource owner for approval during authorization, since such approval has already been given. An AS doing such a process would need to take assurance measures that the different instances are in fact correlated and authentic, as well as ensuring the expected resource owner is in control of the client instance.¶

Finally, if multiple instances of client software each have the same key, then from GNAP's perspective, these are functionally the same client instance as GNAP has no reasonable way to differentiate between them. This situation could happen if multiple instances within a cluster can securely share secret information among themselves. Even though there are multiple copies of the software, the shared key makes these copies all present as a single instance. It is considered bad practice to share keys between copies of software unless they are very tightly integrated with each other and can be closely managed. It is particularly bad practice to allow an end user to copy keys between client instances and to willingly use the same key in multiple instances.¶

13.6. Protection of Authorization Server

The AS performs critical functions in GNAP, including authenticating client software, managing interactions with end users to gather consent and provide notice, and issuing access tokens for client instances to present to resource servers. As such, protecting the AS is central to any GNAP deployment.¶

If an attacker is able to gain control over an AS, they would be able to create fraudulent tokens and manipulate registration information to allow for malicious clients. These tokens and clients would be trusted by other components in the ecosystem under the protection of the AS.¶

If the AS is using signed access tokens, an attacker in control of the AS's signing keys would be able to manufacture fraudulent tokens for use at RS's under the protection of the AS.¶

If an attacker is able to impersonate an AS, they would be able to trick legitimate client instances into making signed requests for information which could potentially be proxied to a real AS. To combat this, all communications to the AS need to be made over TLS or its equivalent, and the software making the connection has to validate the certificate chain of the host it is connecting to.¶

Consequently, protecting, monitoring, and auditing the AS is paramount to preserving the security of a GNAP-protected ecosystem. The AS presents attackers with a valuable target for attack. Fortunately, the core focus and function of the AS is to provide security for the ecosystem, unlike the RS whose focus is to provide an API or the client software whose focus is to access the API.¶

13.7. Symmetric and Asymmetric Client Instance Keys

Many of the cryptographic methods used by GNAP for key-proofing can support both asymmetric and symmetric cryptography, and can be extended to use a wide variety of mechanisms. Implementers will find useful the available guidelines on cryptographic key management provided in [RFC4107]. While symmetric cryptographic systems have some benefits in speed and simplicity, they have a distinct drawback that both parties need access to the same key in order to do both signing and verification of the message. When more than two parties share the same symmetric key, data origin authentication is not provided. Any party that knows the symmetric key can compute a valid MAC; therefore, the contents could originate from any one of the parties.¶

Use of symmetric cryptography means that when the client instance calls the AS to request a token, the AS needs to know the exact value of the client instance's key (or be able to derive it) in order to validate the key proof signature. With asymmetric keys, the client needs only to send its public key to the AS to allow for verification that the client holds the associated private key, regardless of whether that key was pre-registered or not with the AS.¶

Symmetric keys also have the expected advantage of providing better protection against quantum threats in the future. Also, these types of keys (and their secure derivations) are widely supported among many cloud-based key management systems.¶

When used to bind to an access token, a key value must be known by the RS in order to validate the proof signature on the request. Common methods for communicating these proofing keys include putting information in a structured access token and allowing the RS to look up the associated key material against the value of the access token. With symmetric cryptography, both of these methods would expose the signing key to the RS, and in the case of an structured access token, potentially to any party that can see the access token itself unless the token's payload has been encrypted. Any of these parties would then be able to make calls using the access token by creating a valid signature using the shared key. With asymmetric cryptography, the RS needs to know only the public key associated with the token in order to validate the request, and therefore the RS cannot create any new signed calls.¶

While both signing approaches are allowed, GNAP treats these two classes of keys somewhat differently. Only the public portion of asymmetric keys are allowed to be sent by value in requests to the AS when establishing a connection. Since sending a symmetric key (or the private portion of an asymmetric key) would expose the signing material to any parties on the request path, including any attackers, sending these kinds of keys by value is prohibited. Symmetric keys can still be used by client instances, but only if the client instance can send a reference to the key and not its value. This approach allows the AS to use pre-registered symmetric keys as well as key derivation schemes to take advantage of symmetric cryptography but without requiring key distribution at runtime, which would expose the keys in transit.¶

Both the AS and client software can use systems such as hardware security modules to strengthen their key security storage and generation for both asymmetric and symmetric keys (see also Section 7.1.2).¶

13.8. Generation of Access Tokens

The content of access tokens need to be such that only the generating AS would be able to create them, and the contents cannot be manipulated by an attacker to gain different or additional access rights.¶

One method for accomplishing this is to use a cryptographically random value for the access token, generated by the AS using a secure randomization function with sufficiently high entropy. The odds of an attacker guessing the output of the randomization function to collide with a valid access token are exceedingly small, and even then the attacker would not have any control over what the access token would represent since that information would be held close by the AS.¶

Another method for accomplishing this is to use a structured token that is cryptographically signed. In this case, the payload of the access token declares to the RS what the token is good for, but the signature applied by the AS during token generation covers this payload. Only the AS can create such a signature and therefore only the AS can create such a signed token. The odds of an attacker being able to guess a signature value with a useful payload are exceedingly small. This technique only works if all targeted RS's check the signature of the access token. Any RS that does not validate the signature of all presented tokens would be susceptible to injection of a modified or falsified token. Furthermore, an AS has to carefully protect the keys used to sign access tokens, since anyone with access to these signing keys would be able to create seemingly-valid access tokens using them.¶

13.9. Bearer Access Tokens

Bearer access tokens can be used by any party that has access to the token itself, without any additional information. As a natural consequence, any RS that a bearer token is presented to has the technical capability of presenting that bearer token to another RS, as long as the token is valid. It also means that any party that is able capture of the token value in storage or in transit is able to use the access token. While bearer tokens are inherently simpler, this simplicity has been misapplied and abused in making needlessly insecure systems. The downsides of bearer tokens have become more pertinent lately as stronger authentication systems have caused some attacks to shift to target tokens and APIs.¶

In GNAP, key-bound access tokens are the default due to their higher security properties. While bearer tokens can be used in GNAP, their use should be limited to cases where the simplicity benefits outweigh the significant security downsides. One common deployment pattern is to use a gateway that takes in key-bound tokens on the outside, and verifies the signatures on the incoming requests, but translates the requests to a bearer token for use by trusted internal systems. The bearer tokens are never issued or available outside of the internal systems, greatly limiting the exposure of the less secure tokens but allowing the internal deployment to benefit from the advantages of bearer tokens.¶

13.10. Key-Bound Access Tokens

Key-bound access tokens, as the name suggests, are bound to a specific key and must be presented along with proof of that key during use. The key itself is not presented at the same time as the token, so even if a token value is captured, it cannot be used to make a new request. This is particularly true for an RS, which will see the token value but will not see the keys used to make the request (assuming asymmetric cryptography is in use, see Section 13.7).¶

Key-bound access tokens provide this additional layer of protection only when the RS checks the signature of the message presented with the token. Acceptance of an invalid presentation signature, or failure to check the signature entirely, would allow an attacker to make calls with a captured access token without having access to the related signing key material.¶

In addition to validating the signature of the presentation message itself, the RS also needs to ensure that the signing key used is appropriate for the presented token. If an RS does not ensure that the right keys were used to sign a message with a specific token, an attacker would be able to capture an access token and sign the request with their own keys, thereby negating the benefits of using key-bound access tokens.¶

The RS also needs to ensure that sufficient portions of the message are covered by the signature. Any items outside the signature could still affect the API's processing decisions, but these items would not be strongly bound to the token presentation. As such, an attacker could capture a valid request, then manipulate portions of the request outside of the signature envelope in order to cause unwanted actions at the protected API.¶

Some key-bound tokens are susceptible to replay attacks, depending on the details of the signing method used. Key proofing mechanisms used with access tokens therefore need to use replay protection mechanisms covered under the signature such as a per-message nonce, a reasonably short time validity window, or other uniqueness constraints. The details of using these will vary depending on the key proofing mechanism in use, but for example, HTTP Message Signatures has both a created and nonce signature parameter as well as the ability to cover significant portions of the HTTP message. All of these can be used to limit the attack surface.¶

13.11. Exposure of End-user Credentials to Client Instance

As a delegation protocol, one of the main goals of GNAP is to prevent the client software from being exposed to any credentials or information about the end user or resource owner as a requirement of the delegation process. By using the variety of interaction mechanisms, the resource owner can interact with the AS without ever authenticating to the client software, and without the client software having to impersonate the resource owner through replay of their credentials.¶

Consequently, no interaction methods defined in the GNAP core require the end user to enter their credentials, but it is technologically possible for an extension to be defined to carry such values. Such an extension would be dangerous as it would allow rogue client software to directly collect, store, and replay the end user's credentials outside of any legitimate use within a GNAP request.¶

The concerns of such an extension could be mitigated through use of a challenge and response unlocked by the end user's credentials. For example, the AS presents a challenge as part of an interaction start method, and the client instance signs that challenge using a key derived from a password presented by the end user. It would be possible for the client software to collect this password in a secure software enclave without exposing the password to the rest of the client software or putting it across the wire to the AS. The AS can validate this challenge response against a known password for the identified end user. While an approach such as this does not remove all of the concerns surrounding such a password-based scheme, it is at least possible to implement in a more secure fashion than simply collecting and replaying the password. Even so, such schemes should only ever be used by trusted clients due to the ease of abusing them.¶

13.12. Mixing Up Authorization Servers

If a client instance is able to work with multiple AS's simultaneously, it is possible for an attacker to add a compromised AS to the client instance's configuration and cause the client software to start a request at the compromised AS. This AS could then proxy the client's request to a valid AS in order to attempt to get the resource owner to approve access for the legitimate client instance.¶

A client instance needs to always be aware of which AS it is talking to throughout a grant process, and ensure that any callback for one AS does not get conflated with the callback to different AS. The interaction finish hash calculation in Section 4.2.3 allows a client instance to protect against this kind of substitution, but only if the client instance validates the hash. If the client instance does not use an interaction finish method or does not check the interaction finish hash value, the compromised AS can be granted a valid access token on behalf of the resource owner. See [AXELAND2021] for details of one such attack, which has been since addressed in this document by including the grant endpoint in the interaction hash calculation. Note that the client instance still needs to validate the hash for the attack to be prevented.¶

13.13. Processing of Client-Presented User Information

GNAP allows the client instance to present assertions and identifiers of the current user to the AS as part of the initial request. This information should only ever be taken by the AS as a hint, since the AS has no way to tell if the represented person is present at the client software, without using an interaction mechanism. This information does not guarantee the given user is there, but it does constitute a statement by the client software that the AS can take into account.¶

For example, if a specific user is claimed to be present prior to interaction, but a different user is shown to be present during interaction, the AS can either determine this to be an error or signal to the client instance through returned subject information that the current user has changed from what the client instance thought. This user information can also be used by the AS to streamline the interaction process when the user is present. For example, instead of having the user type in their account identifier during interaction at a redirected URI, the AS can immediately challenge the user for their account credentials. Alternatively, if an existing session is detected, the AS can determine that it matches the identifier provided by the client and subsequently skip an explicit authentication event by the resource owner.¶

In cases where the AS trusts the client software more completely, due to policy or by previous approval of a given client instance, the AS can take this user information as a statement that the user is present and could issue access tokens and release subject information without interaction. The AS should only take such action in very limited circumstances, as a client instance could assert whatever it likes for the user's identifiers in its request. The AS can limit the possibility of this by issuing randomized opaque identifiers to client instances to represent different end user accounts after an initial login.¶

When a client instance presents an assertion to the AS, the AS needs to evaluate that assertion. Since the AS is unlikely to be the intended audience of an assertion held by the client software, the AS will need to evaluate the assertion in a different context. Even in this case, the AS can still evaluate that the assertion was generated by a trusted party, was appropriately signed, and is within any time validity windows stated by the assertion. If the client instance's audience identifier is known to the AS and can be associated with the client instance's presented key, the AS can also evaluate that the appropriate client instance is presenting the claimed assertion. All of this will prevent an attacker from presenting a manufactured assertion, or one captured from an untrusted system. However, without validating the audience of the assertion, a captured assertion could be presented by the client instance to impersonate a given end user. In such cases, the assertion offers little more protection than a simple identifier would.¶

A special case exists where the AS is the generator of the assertion being presented by the client instance. In these cases, the AS can validate that it did issue the assertion and it is associated with the client instance presenting the assertion.¶

13.14. Client Instance Pre-registration

Each client instance is identified by its own unique key, and for some kinds of client software such as a web server or backend system, this identification can be facilitated by registering a single key for a piece of client software ahead of time. This registration can be associated with a set of display attributes to be used during the authorization process, identifying the client software to the user. In these cases, it can be assumed that only one instance of client software will exist, likely to serve many different users.¶

A client's registration record needs to include its identifying key. Furthermore, it is the case that any clients using symmetric cryptography for key proofing mechanisms need to have their keys pre-registered. The registration should also include any information that would aid in the authorization process, such as a display name and logo. The registration record can also limit a given client to ask for certain kinds of information and access, or be limited to specific interaction mechanisms at runtime.¶

It also is sensible to pre-register client instances when the software is acting autonomously, without the need for a runtime approval by a resource owner or any interaction with an end user. In these cases, an AS needs to rest on the trust decisions that have been determined prior to runtime in determining what rights and tokens to grant to a given client instance.¶

However, it does not make sense to pre-register many types of clients. Single-page applications (SPAs) and mobile/desktop applications in particular present problems with pre-registration. For SPAs, the instances are ephemeral in nature and long-term registration of a single instance leads to significant storage and management overhead at the AS. For mobile applications, each installation of the client software is a separate instance, and sharing a key among all instances would be detrimental to security as the compromise of any single installation would compromise all copies for all users.¶

An AS can treat these classes of client software differently from each other, perhaps by allowing access to certain high-value APIs only to pre-registered known clients, or by requiring an active end user delegation of authority to any client software not pre-registered.¶

An AS can also provide warnings and caveats to resource owners during the authorization process, allowing the user to make an informed decision regarding the software they are authorizing. For example, if the AS has done vetting of the client software and this specific instance, it can present a different authorization screen compared to a client instance that is presenting all of its information at runtime.¶

Finally, an AS can use platform attestations and other signals from the client instance at runtime to determine whether the software making the request is legitimate or not. The details of such attestations are outside the scope of the core protocol, but the client portion of a grant request provides a natural extension point to such information through the Client Instance Fields registry (Section 11.7).¶

13.15. Client Instance Impersonation

If client instances are allowed to set their own user-facing display information, such as a display name and website URL, a malicious client instance could impersonate legitimate client software for the purposes of tricking users into authorizing the malicious client.¶

Requiring clients to pre-register does not fully mitigate this problem since many pre-registration systems have self-service portals for management of client registration, allowing authenticated developers to enter self-asserted information into the management portal.¶

An AS can mitigate this by actively filtering all self-asserted values presented by client software, both dynamically as part of GNAP and through a registration portal, to limit the kinds of impersonation that would be done.¶

An AS can also warn the resource owner about the provenance of the information it is displaying, allowing the resource owner to make a more informed delegation decision. For example, an AS can visually differentiate between a client instance that can be traced back to a specific developer's registration and an instance that has self-asserted its own display information.¶

13.16. Client-Hosted Logo URI

The logo_uri client display field defined in Section 2.3.2 allows the client instance to specify a URI from which an image can be fetched for display during authorization decisions. When the URI points to an externally hosted resource (as opposed to a data: URI), the logo_uri field presents challenges in addition to the considerations in Section 13.15.¶

When a logo_uri is externally hosted, the client software (or the host of the asset) can change the contents of the logo without informing the AS. Since the logo is considered an aspect of the client software's identity, this flexibility allows for a more dynamically-managed client instance that makes use of the distributed systems.¶

However, this same flexibility allows the host of the asset to change the hosted file in a malicious way, such as replacing the image content with malicious software for download or imitating a different piece of client software. Additionally, the act of fetching the URI could accidentally leak information to the image host in the HTTP Referer header field, if one is sent. Even though GNAP intentionally does not include security parameters in front-channel URI's wherever possible, the AS still should take steps to ensure that this information does not leak accidentally, such as setting a referrer policy on image links or displaying images only from paged served from a URI with no sensitive security or identity information.¶

To avoid these issues, the AS can insist on the use of data: URIs, though that might not be practical for all types of client software. Alternatively, the AS could pre-fetch the content of the URI and present its own copy to the resource owner instead. This practice opens the AS to potential SSRF attacks, as discussed in Section 13.34.¶

13.17. Interception of Information in the Browser

Most information passed through the web-browser is susceptible to interception and possible manipulation by elements within the browser such as scripts loaded within pages. Information in the URI is exposed through browser and server logs, and can also leak to other parties through HTTP Referer headers.¶

GNAP's design limits the information passed directly through the browser, allowing for opaque URIs in most circumstances. For the redirect-based interaction finish mechanism, named query parameters are used to carry unguessable opaque values. For these, GNAP requires creation and validation of a cryptographic hash to protect the query parameters added to the URI and associate them with an ongoing grant process and values not passed in the URI. The client instance has to properly validate this hash to prevent an attacker from injecting an interaction reference intended for a different AS or client instance.¶

Several interaction start mechanisms use URIs created by the AS and passed to the client instance. While these URIs are opaque to the client instance, it's possible for the AS to include parameters, paths, and other pieces of information that could leak security data or be manipulated by a party in the middle of the transaction. An AS implementation can avoid this problem by creating URIs using unguessable values that are randomized for each new grant request.¶

13.18. Callback URI Manipulation

The callback URI used in interaction finish mechanisms is defined by the client instance. This URI is opaque to the AS, but can contain information relevant to the client instance's operations. In particular, the client instance can include state information to allow the callback request to be associated with an ongoing grant request.¶

Since this URI is exposed to the end user's browser, it is susceptible to both logging and manipulation in transit before the request is made to the client software. As such, a client instance should never put security-critical or private information into the callback URI in a cleartext form. For example, if the client software includes a post-redirect target URI in its callback URI to the AS, this target URI could be manipulated by an attacker, creating an open redirector at the client. Instead, a client instance can use an unguessable identifier in the URI that can then be used by the client software to look up the details of the pending request. Since this approach requires some form of statefulness by the client software during the redirection process, clients that are not capable of holding state through a redirect should not use redirect-based interaction mechanisms.¶

13.19. Redirection Status Codes

As already described in [I-D.ietf-oauth-security-topics], a server should never use the HTTP 307 status code to redirect a request that potentially contains user credentials. If an HTTP redirect is used for such a request, the HTTP status code 303 "See Other" should be used instead.¶

The status code 307, as defined in the HTTP standard [HTTP], requires the user agent to preserve the method and content of a request, thus submitting the content of the POST request to the redirect target. In the HTTP standard [HTTP], only the status code 303 unambiguously enforces rewriting the HTTP POST request to an HTTP GET request, which eliminates the POST content from the redirected request. For all other status codes, including status code 302, user agents are allowed not to rewrite a POST request into a GET request and thus to resubmit the contents.¶

The use of status code 307 results in a vulnerability when using the redirect interaction finish method (Section 3.3.5). With this method, the AS potentially prompts the RO to enter their credentials in a form that is then submitted back to the AS (using an HTTP POST request). The AS checks the credentials and, if successful, may directly redirect the RO to the client instance's redirect URI. Due to the use of status code 307, the RO's user agent now transmits the RO's credentials to the client instance. A malicious client instance can then use the obtained credentials to impersonate the RO at the AS.¶

Redirection away from the initial URI in an interaction session could also leak information found in that initial URI through the HTTP Referer header field, which would be sent by the user agent to the redirect target. To avoid such leakage, a server can first redirect to an internal interstitial page without any identifying or sensitive information on the URI before processing the request. When the user agent is ultimately redirected from this page, no part of the original interaction URI will be found in the Referer header.¶

13.20. Interception of Responses from the AS

Responses from the AS contain information vital to both the security and privacy operations of GNAP. This information includes nonces used in cryptographic calculations, subject identifiers, assertions, public keys, and information about what client software is requesting and was granted.¶