| Internet-Draft | DNS Priming Queries | February 2024 |
| Koch, et al. | Expires 9 August 2024 | [Page] |
This document describes the queries that a DNS resolver should emit to initialize its cache. The result is that the resolver gets both a current NS Resource Record Set (RRset) for the root zone and the necessary address information for reaching the root servers.¶
This document, when published, obsoletes RFC 8109. See Section 1.1 for the list of changes from RFC 8109.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 9 August 2024.¶
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
Recursive DNS resolvers need a starting point to resolve queries. [RFC1034] describes a common scenario for recursive resolvers: they begin with an empty cache and some configuration for finding the names and addresses of the DNS root servers. [RFC1034] describes that configuration as a list of servers that will give authoritative answers to queries about the root. This has become a common implementation choice for recursive resolvers, and is the topic of this document.¶
This document describes the steps needed for this common implementation choice. Note that this is not the only way to start a recursive name server with an empty cache, but it is the only one described in [RFC1034]. Some implementers have chosen other directions, some of which work well and others of which fail (sometimes disastrously) under different conditions. For example, an implementation that only gets the addresses of the root name servers from configuration, not from the DNS as described in this document, will have stale data that could cause slower resolution.¶
This document only deals with recursive name servers (recursive resolvers, resolvers) for the IN class.¶
This document obsoletes [RFC8109]. The significant changes from RFC 8109 are:¶
Added section on the content of priming information.¶
Added paragraph about no expectation that the TC bit in responses will be set.¶
Added paragraph about RFC 9471 and requirements on authoritative servers and the TC bit.¶
Changed "man-in-the-middle" to "machine-in-the-middle" to be both less sexist and more technically accurate.¶
Clarified that there are other effects of machine-in-the-middle attacks.¶
Clarified language for root server domain names as "root server identifiers".¶
Added short discussion of post-priming strategies.¶
Added informative references to RSSAC documents.¶
Added short discussion about this document and private DNS.¶
Clarified that machine-in-the-middle attacks could be successful for non-signed TLDs.¶
Added discussion of where resolvers that pre-fetch should get the root NS addresses.¶
Elevated the expectations in "Expected Properties of the Priming Response" to MUST-level.¶
Clarified that "currently" means at the time that this document is published.¶
Added a note about priming and RFC 8806.¶
Added a reference to research about discontinued root server addresses.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
See [RSSAC026v2] for terminology that relates to the root server system.¶
Priming is the act of finding the list of root servers from a configuration that lists some or all of the purported IP addresses of some or all of those root servers. In priming, a recursive resolver starts with no cached information about the root servers, and finishes with a full list of their names and their addresses in its cache.¶
Priming is described in Sections 5.3.2 and 5.3.3 of [RFC1034]. (It is called "SBELT", a "safety belt" structure, in that document.) The scenario used in that description, that of a recursive server that is also authoritative, is no longer as common.¶
The configured list of IP addresses for the root servers usually comes from the vendor or distributor of the recursive server software. This list is usually correct and complete when shipped, but may become out of date over time.¶
The domain names for the root servers are called the "root server identifiers". This list has been stable since 1997, but the IPv4 and IPv6 addresses for the root server identifiers sometimes change. Research shows that after those addresses change, some resolvers never get the new addresses; for example, see [OLD-J].¶
Therefore, it is important that resolvers be able to cope with change, even without relying upon configuration updates to be applied by their operator. Root server identifier and address changes are the main reasons that resolvers need to use priming to get a full and accurate list of root servers, instead of just using a statically configured list.¶
See [RSSAC023v2] for a history of the root server system.¶
Although this document is targeted at the global DNS, it also could apply to a private DNS as well. These terms are defined in [RFC8499].¶
Some systems serve a copy of the full root zone on the same server as the resolver, such as is described in [RFC8806]. In such a setup, the resolver primes its cache using the same methods as described in the rest of this document.¶
As described above, the configuration for priming is a list of IP addresses. The priming information in software may be in any format that gives the software the addresses associated with at least some of the root server identifiers.¶
Some software has configuration that also contains the root server identifiers, sometimes as comments and sometimes as data consumed by the software. For example, IANA's "Root Hints File" at <https://www.internic.net/domain/named.root> is derived directly from the root zone and contains all of the addresses of the root server identifiers found in the root zone. It is in DNS zone file presentation format, and includes the root server identifiers. Although there is no harm to adding such information, it is not useful in the root priming process.¶
A priming query is a DNS query whose response provides root server names and addresses. It has a QNAME of ".", a QTYPE of NS, and a QCLASS of IN; it is sent to one of the addresses in the configuration for the recursive resolver. The priming query can be sent over either UDP or TCP. If the query is sent over UDP, the source port SHOULD be randomly selected (see [RFC5452]). The Recursion Desired (RD) bit MAY be set to 0 or 1, although the meaning of it being set to 1 is undefined for priming queries.¶
The recursive resolver SHOULD use EDNS0 [RFC6891] for priming queries and SHOULD announce and handle a reassembly size of at least 1024 octets [RFC3226]. Doing so allows responses that cover the size of a full priming response (see Section 4.2) for the current set of root servers. See Section 3.3 for discussion of setting the DNSSEC OK (DO) bit (defined in [RFC4033]).¶
The recursive resolver SHOULD send a priming query only when it is needed, such as when the resolver starts with an empty cache or when the NS RRset for the root zone has expired. Because the NS records for the root zone are not special, the recursive resolver expires those NS records according to their TTL values. (Note that a recursive resolver MAY pre-fetch the NS RRset before it expires.)¶
If a resolver chooses to pre-fetch the root NS RRset before that RRset has expired in its cache, it needs to choose whether to use the addresses for the root NS RRset that it already has in its cache or to use the addresses it has in its configuration. Such a resolver SHOULD send queries to the addresses in its cache in order to reduce the chance of delay due to out-of-date addresses in its configuration.¶
If a priming query does not get a response, the recursive resolver MUST retry the query with a different target address from the configuration.¶
In order to spread the load across all the root server identifiers, the recursive resolver SHOULD select the target for a priming query randomly from the list of addresses. The recursive resolver might choose either IPv4 or IPv6 addresses based on its knowledge of whether the system on which it is running has adequate connectivity on either type of address.¶
Note that this recommended method is not the only way to choose from the list in a recursive resolver's configuration. Two other common methods include picking the first from the list, and remembering which address in the list gave the fastest response earlier and using that one. There are probably other methods in use today. However, the random method listed above SHOULD be used for priming.¶
The resolver MAY set the DNSSEC OK (DO) bit. At the time of publication, there is little use to performing DNSSEC validation on the priming query. At the time this document is published, all root server names end in "root-servers.net" and the AAAA and A RRsets for the root server names reside in the "root-servers.net" zone. All root servers are also authoritative for this zone, allowing priming responses to include the appropriate root name server A and AAAA RRsets. But, because the "root-servers.net" zone is not signed at the time this document is published, these RRsets cannot be validated.¶
A machine-in-the-middle attack on the priming query could direct a resolver to a rogue root name server. Note, however, that a validating resolver will not accept responses for signed TLDs from rogue root servers if they are different from the real responses because the resolver has a trust anchor for the root and the answers from the root are signed. Thus, if there is a machine-in-the-middle attack on the priming query, the results for a validating resolver for signed TLDs could be a denial of service, or the attacker seeing queries while returning good answers, but not the resolver's accepting the bad responses; however, for unsigned TLDs, the attack would be successful.¶
If the "root-servers.net" zone is later signed, or if the root servers are named in a different zone and that zone is signed, having DNSSEC validation for the priming queries might be valuable. The benefits and costs of resolvers validating the responses will depend heavily on the naming scheme used.¶
A priming query is a normal DNS query. Thus, a root server cannot distinguish a priming query from any other query for the root NS RRset. Thus, the root server's response will also be a normal DNS response.¶
The priming response MUST have an RCODE of NOERROR, and MUST have the Authoritative Answer (AA) bit set. Also, it MUST have an NS RRset in the Answer section (because the NS RRset originates from the root zone), and an empty Authority section (because the NS RRset already appears in the Answer section). There will also be an Additional section with A and/or AAAA RRsets for the root servers pointed at by the NS RRset.¶
Resolver software SHOULD treat the response to the priming query as a normal DNS response, just as it would use any other data fed to its cache. Resolver software SHOULD NOT expect 13 NS RRs because, historically, some root servers have returned fewer.¶
At the time this document is published, there are 13 root server operators operating a total of more than 1500 root server instances. Each has one IPv4 address and one IPv6 address. The combined size of all the A and AAAA RRsets exceeds the original 512-octet payload limit from [RFC1035].¶
In the event of a response where the Additional section omits certain root server address information, re-issuing of the priming query does not help with those root name servers that respond with a fixed order of addresses in the Additional section. Instead, the recursive resolver needs to issue direct queries for A and AAAA RRsets for the remaining names. At the time this document is published, these RRsets would be authoritatively available from the root name servers.¶
If some root server addresses are omitted from the Additional section, there is no expectation that the TC bit in the response will be set to 1. At the time that this document is written, many of the root servers are not setting the TC bit when omitting addresses from the Additional section.¶
Note that [RFC9471] updates [RFC1035] with respect to the use of the TC bit. It says "If message size constraints prevent the inclusion of all glue records for in-domain name servers, the server must set the TC (Truncated) flag to inform the client that the response is incomplete and that the client should use another transport to retrieve the full response." Note, however, the root server addresses are not glue records, so setting the TC bit in truncated responses from the root servers is not required by [RFC9471].¶
When a resolver has a zone's NS RRset in cache, and it gets a query for a domain in that zone that cannot be answered from its cache, the resolver has to choose which NS to send queries to. (This statement is as true for the root zone as for any other zone in the DNS.) Two common strategies for choosing are "determine the fastest name server and always use it" and "create buckets of fastness and pick randomly in the buckets". This document gives no preference to any particular strategy other than to suggest that resolvers not treat the root zone as special for this decision.¶
Spoofing a response to a priming query can be used to redirect all of the queries originating from a victim recursive resolver to one or more servers for the attacker. Until the responses to priming queries are protected with DNSSEC, there is no definitive way to prevent such redirection.¶
An on-path attacker who sees a priming query coming from a resolver can inject false answers before a root server can give correct answers. If the attacker's answers are accepted, this can set up the ability to give further false answers for future queries to the resolver. False answers for root servers are more dangerous than, say, false answers for Top-Level Domains (TLDs), because the root is the highest node of the DNS. See Section 3.3 for more discussion.¶
In both of the scenarios above, a validating resolver will be able to detect the attack if its chain of queries comes to a zone that is signed, but not for those that are unsigned.¶
This document does not require any IANA actions.¶
RFC 8109 was the product of the DNSOP WG and benefitted from the reviews done there. This document also benefitted from review by Duane Wessels.¶