Constrained Bootstrapping Remote Secure Key Infrastructure (BRSKI)

6.1. Registrar and the Server Name Indicator (SNI)

A DTLS connection is established between the Pledge and the Registrar, similar to the TLS connection described in Section 5.1 of [RFC8995]. This may occur via a Join Proxy as described in Section 6.4. Regardless of the Join Proxy mechanism, the DTLS connection should operate identically.¶

The SNI issue described below affects [RFC8995] as well, and is reported in errata: https://www.rfc-editor.org/errata/eid6648¶

As the Registrar is discovered by IP address, and typically connected via a Join Proxy, the name of the Registrar is not known to the Pledge. The Pledge will not know what the hostname for the Registrar is, so it cannot do RFC6125 DNS-ID validation on the Registrar's certificate. Instead, it must do validation using the RFC8366 voucher.¶

As the Pledge does not know the name of the Registrar, the Pledge cannot put any reasonable value into the [RFC6066] Server Name Indicator (SNI). Threfore the Pledge SHOULD omit the SNI extension as per Section 9.2 of [RFC8446].¶

In some cases, particularly while testing BRSKI, a Pledge may be given the hostname of a particular Registrar to connect to directly. Such a bypass of the discovery process may result in the Pledge taking a different code branch to establish a DTLS connection, and may result in the SNI being inserted by a library. The Registrar MUST ignore any SNI seen.¶

A primary motivation for making the SNI ubiquitous in the public web is because it allows for multi-tenant hosting of HTTPS sites on a single (scarce) IPv4 address. This consideration does not apply to the server function in the Registrar because:¶

• it uses DTLS and CoAP, not HTTPS¶
• it typically uses IPv6, often [RFC4193] Unique Local Address, which are plentiful¶
• the server port number is typically discovered, so multiple tenants can be accomodated via unique port numbers.¶

As per Section 3.6.1 of [RFC7030], the Registrar certificate MUST have the Extended Key Usage (EKU) id-kp-cmcRA. This certificate is also used as a TLS Server Certificate, so it MUST also have the EKU id-kp-serverAuth.¶

6.2. TLS Client Certificates: IDevID authentication

As described in Section 5.1 of [RFC8995], the Pledge makes a connection to the Registrar using a TLS Client Certificate for authentication.¶

Subsequently the Pledge will send a Pledge Voucher Request (PVR).¶

As explained below in Section 8.1, the "x5bag" element may be used in the RVR to communicate identity of the Registrar to MASA. The Pledge SHOULD NOT use the x5bag attribute in this way in the PVR. A Registrar that processes a PVR with an x5bag attribute MUST ignore it, and MUST use only the TLS Client Certificate extension for authentication of the Pledge.¶

A situation where the Pledge MAY use the x5bag is for communication of certificate chains to the MASA. This would arise in some vendor-specific situations involving outsourcing of MASA functionality, or rekeying of the IDevID certification authority.¶

6.3. Discovery, URIs and Content Formats

To keep the protocol messages small the EST-coaps and constrained-BRSKI URIs are shorter than the respective EST and BRSKI URIs.¶

The EST-coaps server URIs differ from the EST URIs by replacing the scheme https by coaps and by specifying shorter resource path names. Below are some examples; the first two using a discovered short path name and the last one using the well-known URI of EST which requires no discovery.¶

  coaps://server.example.com/est/<short-name>
  coaps://server.example.com/e/<short-name>
  coaps://server.example.com/.well-known/est/<short-name>

Similarly the constrained BRSKI server URIs differ from the BRSKI URIs by replacing the scheme https by coaps and by specifying shorter resource path names. Below are some examples; the first two using a discovered short path name and the last one using the well-known URI prefix which requires no discovery. This is the same "/.well-known/brski" prefix as defined in Section 5 of [RFC8995].¶

  coaps://server.example.com/brski/<short-name>
  coaps://server.example.com/b/<short-name>
  coaps://server.example.com/.well-known/brski/<short-name>

Figure 5 in Section 3.2.2 of [RFC7030] enumerates the operations supported by EST, for which Table 1 in Section 5.1 of [I-D.ietf-ace-coap-est] enumerates the corresponding EST-coaps short path names. Similarly, Table 1 below provides the mapping from the supported BRSKI extension URI paths to the constrained-BRSKI URI paths.¶

Note that /requestvoucher indicated above occurs between the Pledge and Registrar (in scope of the BRSKI-EST protocol), but it also occurs between Registrar and MASA. However, as described in Section 6, this section and above table addresses only the BRSKI-EST protocol.¶

Pledges that wish to discover the available BRSKI bootstrap options/formats, or reduce the size of the CoAP headers by eliminating the "/.well-known/brski" path, can do a discovery operation using [RFC6690] Section 4 by sending a discovery query to the Registrar.¶

For example, if the Registrar supports a short BRSKI URL (/b) and supports the voucher format "application/voucher-cose+cbor" (TBD3), and status reporting in both CBOR and JSON formats:¶

  REQ: GET /.well-known/core?rt=brski*

  RES: 2.05 Content
  Content-Format: 40
  Payload:
  </b>;rt=brski,
  </b/rv>;rt=brski.rv;ct=TBD3,
  </b/vs>;rt=brski.vs;ct="50 60",
  </b/es>;rt=brski.es;ct="50 60"

The Registrar is under no obligation to provide shorter URLs, and MAY respond to this query with only the "/.well-known/brski/<short-name>" resources for the short names as defined in Table 1.¶

Registrars that have implemented shorter URLs MUST also respond in equivalent ways to the corresponding "/.well-known/brski/<short-name>" URLs, and MUST NOT distinguish between them. In particular, a Pledge MAY use the longer and shorter URLs in any combination.¶

When responding to a discovery request for BRSKI resources, the server MAY in addition return the full resource paths and the content types which are supported by these resources as shown in above example. This is useful when multiple content types are specified for a particular resource on the server. The server responds with only the root path for the BRSKI resources (rt=brski, resource /b in above example) and no others in case the client queries for only rt=brski type resources. (So, a query for rt=brski, without the wildcard character.)¶

Without discovery, a longer well-known URL can only be used, such as:¶

   REQ: GET /.well-known/brski/rv

while with discovery of shorter URLs, a request such as:¶

   REQ: GET /b/rv

is possible.¶

The return of multiple content-types in the "ct" attribute allows the Pledge to choose the most appropriate one. Note that Content-Format TBD3 ("application/voucher-cose+cbor") is defined in this document.¶

Content-Format TBD3 MUST be supported by the Registrar for the /rv resource. If the "ct" attribute is not indicated for the /rv resource in the link format description, this implies that at least TBD3 is supported.¶

Note that this specification allows for voucher-cose+cbor format requests and vouchers to be transmitted over HTTPS, as well as for voucher-cms+json and other formats yet to be defined over CoAP. The burden for this flexibility is placed upon the Registrar. A Pledge on constrained hardware is expected to support a single format only.¶

The Pledge and MASA need to support one or more formats (at least TBD3) for the voucher and for the voucher request. The MASA needs to support all formats that the Pledge supports.¶

Section 10 details how the Pledge discovers the Registrar and Join Proxy in different deployment scenarios.¶

6.4. Join Proxy options

[I-D.ietf-anima-constrained-join-proxy] specifies a constrained Join Proxy that is optionally placed between Pledge and Registrar. This includes methods for discovery of the Join Proxy by the Pledge and discovery of the Registrar by the Join Proxy.¶

6.5. Extensions to BRSKI

6.6. Extensions to EST-coaps

This document extends [I-D.ietf-ace-coap-est], and it inherits the functions described in that document: specifically, the mandatory Simple (Re-)Enrollment (/sen and /sren) and Certification Authority certificates request (/crts). Support for CSR Attributes Request (/att) and server-side key generation (/skg, /skc) remains optional for the EST server.¶

Collecting the resource definitions from both [RFC8995], [RFC7030], and [I-D.ietf-ace-coap-est] results in the following shorter forms of URI paths for the commonly used resources:¶

6.7. DTLS handshake fragmentation Considerations

DTLS includes a mechanism to fragment the handshake messages. This is described in Section 4.4 of [I-D.ietf-tls-dtls13]. The protocol described in this document will often be used with a Join Proxy described in [I-D.ietf-anima-constrained-join-proxy]. The Join Proxy will need some overhead, while the maximum packet sized guaranteed on 802.15.4 networks is 1280 bytes. It is RECOMMENDED that a PMTU of 1024 bytes be assumed for the DTLS handshake. It is unlikely that any Packet Too Big indications [RFC4443] will be relayed by the Join Proxy.¶

During the operation of the constrained BRSKI-EST protocol, the CoAP Blockwise transfer mechanism will be used when message sizes exceed the PMTU. A Pledge/EST-client on a constrained network MUST use the (D)TLS maximum fragment length extension ("max_fragment_length") defined in Section 4 of [RFC6066] with the maximum fragment length set to a value of either 2^9 or 2^10.¶

7.1. Protocol and Formats

Section 5.4 of [RFC8995] describes a connection between the Registrar and the MASA as being a normal TLS connection using HTTPS. This document does not change that. The Registrar MUST use the format "application/voucher-cose+cbor" in its voucher request to MASA, when the Pledge uses this format in its reauqtes to the Registrar [RFC8995].¶

The MASA only needs to support formats for which there are Pledges that use that format.¶

The Registrar MUST use the same format for the RVR as the Pledge used for its PVR.¶

The Registrar indicates the voucher format it wants to receive from MASA using the HTTP Accept header. This format MUST be the same as the format of the PVR, so that the Pledge can parse it.¶

At the moment of writing the creation of coaps based MASAs is deemed unrealistic. The use of CoAP for the BRSKI-MASA connection can be the subject of another document. Some consideration was made to specify CoAP support for consistency, but:¶

• the Registrar is not expected to be so constrained that it cannot support HTTPS client connections.¶
• the technology and experience to build Internet-scale HTTPS responders (which the MASA is) is common, while the experience doing the same for CoAP is much less common.¶
• a Registrar is likely to provide onboarding services to both constrained and non-constrained devices. Such a Registrar would need to speak HTTPS anyway.¶
• a manufacturer is likely to offer both constrained and non-constrained devices, so there may in practice be no situation in which the MASA could be CoAP-only. Additionally, as the MASA is intended to be a function that can easily be oursourced to a third-party service provider, reducing the complexity would also seem to reduce the cost of that function.¶
• security-related considerations: see Section 14.6.¶

7.2. Registrar Voucher Request

If the PVR contains a proximity assertion, the Registrar MUST propagate this assertion into the RVR by including the "assertion" field with the value "proximity". This conforms to the example in Section 3.3 of [RFC8995] of carrying the assertion forward.¶

7.3. MASA and the Server Name Indicator (SNI)

A TLS/HTTPS connection is established between the Registrar and MASA.¶

Section 5.4 of [RFC8995] explains this process, and there are no externally visible changes. A MASA that supports the unconstrained voucher formats should be able to support constrained voucher formats equally well.¶

There is no requirement that a single MASA be used for both constrained and unconstrained voucher requests: the choice of MASA is determined by the id-mod-MASAURLExtn2016 extension contained in the IDevID.¶

The Registrar MUST do [RFC6125] DNS-ID checks on the contents of the certificate provided by the MASA.¶

In constrast to the Pledge/Registrar situation, the Registrar always knows the name of the MASA, and MUST always include an [RFC6066] Server Name Indicator. The SNI is optional in TLS1.2, but common. The SNI it considered mandatory with TLS1.3.¶

The presence of the SNI is needed by the MASA, in order for the MASA's server to host multiple tenants (for different customers).¶

The Registrar SHOULD use a TLS Client Certificate to authenticate to the MASA per Section 5.4.1 of [RFC8995]. If the certificate that the Registrar uses is marked as a id-kp-cmcRA certificate, via Extended Key Usage, then it MUST also have the id-kp-clientAuth EKU attribute set.¶

8.1. Registrar Identity Selection and Encoding

Section 5.5 of [RFC8995] describes BRSKI policies for selection of the owner identity. It indicates some of the flexibility that is possible for the Registrar, and recommends the Registrar to include only certificates in the voucher request (CMS) signing structure that participate in the certificate chain that is to be pinned.¶

The MASA is expected to evaluate the certificates included by the Registrar in its voucher request, forming them into a chain with the Registrar's (signing) identity on one end. Then, it pins a certificate selected from the chain. For instance, for a domain with a two-level certification authority (see Figure 1), where the voucher-request has been signed by "Registrar", its signing structure includes two additional CA certificates. The arrows in the figure indicate the issuing of a certificate, i.e. author of (1) issued (2) and author of (2) issued (3).¶

 .------------------.
 |  domain CA (1)   |
 |  trust anchor    |
 '------------------'
           |
           v
    .------------.
    | domain (2) |
    | Sub-CA     |
    '------------'
           |
           |
           v
  .----------------.
  |   domain       |
  | Registrar (3)  |
  | EE certificate |
  '----------------'

When the Registrar is using a COSE-signed constrained voucher request towards MASA, instead of a regular CMS-signed voucher request, the COSE_Sign1 object contains a protected and an unprotected header. The Registrar MUST place all the certificates needed to validate the signature chain from the Registrar on the RVR in an "x5bag" attribute in the unprotected header [I-D.ietf-cose-x509].¶

The "x5bag" attribute is very important as it provides the required signals from the Registrar to control what identity is pinned in the resulting voucher. This is explained in the next section.¶

8.2. MASA Pinning Policy

The MASA, having assembled and verified the chain in the signing structure of the voucher request needs to select a certificate to pin. (For the case that only the Registrar's End-Entity certificate is included, only this certificate can be selected and this section does not apply.) The BRSKI policy for pinning by the MASA as described in Section 5.5.2 of [RFC8995] leaves much flexibility to the manufacturer.¶

The present document adds the following rules to the MASA pinning policy to reduce the network load:¶

1. for a voucher containing a nonce, it SHOULD select the most specific (lowest-level) CA certificate in the chain.¶
2. for a nonceless voucher, it SHOULD select the least-specific (highest-level) CA certificate in the chain that is allowed under the MASA's policy for this specific domain.¶

The rationale for 1. is that in case of a voucher with nonce, the voucher is valid only in scope of the present DTLS connection between Pledge and Registrar anyway, so there is no benefit to pin a higher-level CA. By pinning the most specific CA the constrained Pledge can validate its DTLS connection using less crypto operations. The rationale for pinning a CA instead of the Registrar's End-Entity certificate directly is based on the following benefit on constrained networks: the pinned certificate in the voucher can in common cases be re-used as a Domain CA trust anchor during the EST enrollment and during the operational phase that follows after EST enrollment, as explained in Section 6.6.1.¶

The rationale for 2. follows from the flexible BRSKI trust model for, and purpose of, nonceless vouchers (Sections 5.5.* and 7.4.1 of [RFC8995]).¶

Refering to Figure 1 of a domain with a two-level certification authority, the most specific CA ("Sub-CA") is the identity that is pinned by MASA in a nonced voucher. A Registrar that wished to have only the Registrar's End-Entity certificate pinned would omit the "domain CA" and "Sub-CA" certificates from the voucher-request.¶

In case of a nonceless voucher, depending on the trust level, the MASA pins the "Registrar" certificate (low trust in customer), or the "Sub-CA" certificate (in case of medium trust, implying that any Registrar of that sub-domain is acceptable), or even the "domain CA" certificate (in case of high trust in the customer, and possibly a pre-agreed need of the customer to obtain flexible long-lived vouchers).¶

8.3. Pinning of Raw Public Keys

Specifically for constrained use cases, the pinning of the raw public key (RPK) of the Registrar is also supported in the constrained voucher, instead of an X.509 certificate. If an RPK is pinned it MUST be the RPK of the Registrar.¶

When the Pledge is known by MASA to support RPK but not X.509 certificates, the voucher produced by the MASA pins the RPK of the Registrar in either the "pinned-domain-pubk" or "pinned-domain-pubk-sha256" field of a voucher. This is described in more detail in Section 9.2.3. A Pledge that does not support X.509 certificates cannot use EST to enroll; it has to use another method for enrollment without certificates and the Registrar has to support this method also. It is possible that the Pledge will not enroll, but instead only a network join operation will occur (See [RFC9031]). How the Pledge discovers this method and details of the enrollment method are out of scope of this document.¶

When the Pledge is known by MASA to support PKIX format certificates, the "pinned-domain-cert" field present in a voucher typically pins a domain certificate. That can be either the End-Entity certificate of the Registrar, or the certificate of a domain CA of the Registrar's domain as specified in Section 8.2. However, if the Pledge is known to also support RPK pinning and the MASA intends to identify the Registrar in the voucher (not the CA), then MASA MUST pin the RPK (RPK3 in Figure 2) of the Registrar instead of the Registrar's End-Entity certificate to save space in the voucher.¶

 .------------.
 | pub-CA (1) |
 '------------'
        |
        v
 .------------.
 | sub-CA (2) |
 '------------'
        |
        v
.--------------.
| Registrar(3) |
|    RPK3      |
'--------------'

8.4. Considerations for use of IDevID-Issuer

[RFC8366] and [RFC8995] defines the idevid-issuer attribute for voucher and voucher-request (respectively), but they summarily explain when to use it.¶

The use of idevid-issuer is provided so that the serial-number to which the issued voucher pertains can be relative to the entity that issued the devices' IDevID. In most cases there is a one to one relationship between the trust anchor that signs vouchers (and is trusted by the pledge), and the Certification Authority that signs the IDevID. In that case, the serial-number in the voucher must refer to the same device as the serial-number that is in IDevID certificate.¶

However, there situations where the one to one relationship may be broken. This occurs whenever a manufacturer has a common MASA, but different products (on different assembly lines) are produced with identical serial numbers. A system of serial numbers which is just a simple counter is a good example of this. A system of serial numbers where there is some prefix relating the product type does not fit into this, even if the lower digits are a counter.¶

It is not possible for the Pledge or the Registrar to know which situation applies. The question to be answered is whether or not to include the idevid-issuer in the PVR and the RVR. A second question arisews as to what the format of the idevid-issuer contents are.¶

Analysis of the situation shows that the pledge never needs to include the idevid-issuer in it's PVR, because the pledge's IDevID certificate is available to the Registrar, and the Authority Key Identifier is contained within that. The pledge therefore has no need to repeat this.¶

For the RVR, the Registrar has to examine the pledge's IDevID certificate to discover the serial number for the Registrar's Voucher Request (RVR). This is clear in Section 5.5 of [RFC8995]. That section also clarifies that the idevid-issuer is to be included in the RVR.¶

Concerning the Authority Key Identifier, [RFC8366] specifies that the entire object i.e. the extnValue OCTET STRING is to be included: comprising the AuthorityKeyIdentifier, SEQUENCE, Choice as well as the OCTET STRING that is the keyIdentifier.¶

9.1. Voucher Request artifact

module: ietf-voucher-request-constrained

  grouping voucher-request-constrained-grouping
    +-- voucher
       +-- created-on?                        yang:date-and-time
       +-- expires-on?                        yang:date-and-time
       +-- assertion                          enumeration
       +-- serial-number                      string
       +-- idevid-issuer?                     binary
       +-- pinned-domain-cert?                binary
       +-- domain-cert-revocation-checks?     boolean
       +-- nonce?                             binary
       +-- last-renewal-date?                 yang:date-and-time
       +-- proximity-registrar-pubk?          binary
       +-- proximity-registrar-pubk-sha256?   binary
       +-- proximity-registrar-cert?          binary
       +-- prior-signed-voucher-request?      binary

      SID Assigned to
--------- --------------------------------------------------
     2501 data /ietf-voucher-request-constrained:voucher
     2502 data .../assertion
     2503 data .../created-on
     2504 data .../domain-cert-revocation-checks
     2505 data .../expires-on
     2506 data .../idevid-issuer
     2507 data .../last-renewal-date
     2508 data /ietf-voucher-request-constrained:voucher/nonce
     2509 data .../pinned-domain-cert
     2510 data .../prior-signed-voucher-request
     2511 data .../proximity-registrar-cert
     2513 data .../proximity-registrar-pubk
     2512 data .../proximity-registrar-pubk-sha256
     2514 data .../serial-number

<CODE BEGINS> file "ietf-voucher-request-constrained@2021-04-15.yang"

module ietf-voucher-request-constrained {
  yang-version 1.1;

  namespace
    "urn:ietf:params:xml:ns:yang:ietf-voucher-request-constrained";
  prefix "constrained";

  import ietf-restconf {
    prefix rc;
    description
      "This import statement is only present to access
       the yang-data extension defined in RFC 8040.";
    reference "RFC 8040: RESTCONF Protocol";
  }

  import ietf-voucher {
    prefix "v";
  }

  organization
   "IETF ANIMA Working Group";

  contact
   "WG Web:   <http://tools.ietf.org/wg/anima/>
    WG List:  <mailto:anima@ietf.org>
    Author:   Michael Richardson
              <mailto:mcr+ietf@sandelman.ca>
    Author:   Peter van der Stok
              <mailto: consultancy@vanderstok.org>
    Author:   Panos Kampanakis
              <mailto: pkampana@cisco.com>";

  description
   "This module defines the format for a voucher request,
    which is produced by a pledge to request a voucher.
    The voucher-request is sent to the potential owner's
    Registrar, which in turn sends the voucher request to
    the manufacturer or its delegate (MASA).

    A voucher is then returned to the pledge, binding the
    pledge to the owner.  This is a constrained version of the
    voucher-request present in
    {{I-D.ietf-anima-bootstrap-keyinfra}}

    This version provides a very restricted subset appropriate
    for very constrained devices.
    In particular, it assumes that nonce-ful operation is
    always required, that expiration dates are rather weak, as no
    clocks can be assumed, and that the Registrar is identified
    by either a pinned Raw Public Key of the Registrar, or by a
    pinned X.509 certificate of the Registrar or domain CA.

    The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
    'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'MAY',
    and 'OPTIONAL' in the module text are to be interpreted as
    described in RFC 2119.";

  revision "2021-04-15" {
    description
     "Initial version";
    reference
     "RFC XXXX: Voucher Profile for Constrained Devices";
  }

  rc:yang-data voucher-request-constrained-artifact {
    // YANG data template for a voucher.
    uses voucher-request-constrained-grouping;
  }

  // Grouping defined for future usage
  grouping voucher-request-constrained-grouping {
    description
      "Grouping to allow reuse/extensions in future work.";

    uses v:voucher-artifact-grouping {

      refine voucher/created-on {
          mandatory  false;
      }

      refine voucher/pinned-domain-cert {
          mandatory  false;
      }


      augment "voucher" {
        description "Base the constrained voucher-request upon the
          regular one";

        leaf proximity-registrar-pubk {
          type binary;
          description
            "The proximity-registrar-pubk replaces
             the proximity-registrar-cert in constrained uses of
             the voucher-request.
             The proximity-registrar-pubk is the
             Raw Public Key of the Registrar. This field is encoded
             as specified in RFC7250, section 3.
             The ECDSA algorithm MUST be supported.
             The EdDSA algorithm as specified in
             draft-ietf-tls-rfc4492bis-17 SHOULD be supported.
             Support for the DSA algorithm is not recommended.
             Support for the RSA algorithm is a MAY, but due to
             size is discouraged.";
        }

        leaf proximity-registrar-pubk-sha256 {
          type binary;
          description
            "The proximity-registrar-pubk-sha256
             is an alternative to both
             proximity-registrar-pubk and pinned-domain-cert.
             In many cases the public key of the domain has already
             been transmitted during the key agreement protocol,
             and it is wasteful to transmit the public key another
             two times.
             The use of a hash of public key info, at 32-bytes for
             sha256 is a significant savings compared to an RSA
             public key, but is only a minor savings compared to
             a 256-bit ECDSA public-key.
             Algorithm agility is provided by extensions to this
             specification which may define a new leaf for another
             hash type.";
        }

        leaf proximity-registrar-cert {
          type binary;
          description
            "An X.509 v3 certificate structure as specified by
             RFC 5280,
             Section 4 encoded using the ASN.1 distinguished encoding
             rules (DER), as specified in ITU-T X.690.

             The first certificate in the Registrar TLS server
             certificate_list sequence  (see [RFC5246]) presented by
             the Registrar to the Pledge. This field or one of its
             alternatives MUST be populated in a
             Pledge's voucher request if the proximity assertion is
             populated.";
        }

        leaf prior-signed-voucher-request {
          type binary;
          description
            "If it is necessary to change a voucher, or re-sign and
             forward a voucher that was previously provided along a
             protocol path, then the previously signed voucher
             SHOULD be included in this field.

             For example, a pledge might sign a proximity voucher,
             which an intermediate registrar then re-signs to
             make its own proximity assertion.  This is a simple
             mechanism for a chain of trusted parties to change a
             voucher, while maintaining the prior signature
             information.

             The pledge MUST ignore all prior voucher information
             when accepting a voucher for imprinting. Other
             parties MAY examine the prior signed voucher
             information for the purposes of policy decisions.
             For example, this information could be useful to a
             MASA to determine that both pledge and registrar
             agree on proximity assertions. The MASA SHOULD
             remove all prior-signed-voucher-request information when
             signing a voucher for imprinting so as to minimize the
             final voucher size.";
        }
      }
    }
  }
}


<CODE ENDS>

{
  2501: {
    +2 : "2016-10-07T19:31:42Z", / SID=2503, created-on /
    +4 : "2016-10-21T19:31:42Z", / SID=2505, expires-on /
    +1 : 2,                      / SID=2502, assertion "proximity" /
    +13: "JADA123456789",        / SID=2514, serial-number /
    +5 : h'08C2BF36....B3D2B3',  / SID=2506, idevid-issuer /
    +10: h'30820275....82c35f',  / SID=2511, proximity-registrar-cert/
    +3 : true,                   / SID=2504, domain-cert
                                                   -revocation-checks/
    +6 : "2017-10-07T19:31:42Z"  / SID=2507, last-renewal-date /
  }
}

9.2. Voucher artifact

The voucher's primary purpose is to securely assign a Pledge to an owner. The voucher informs the Pledge which entity it should consider to be its owner.¶

module: ietf-voucher-constrained

  grouping voucher-constrained-grouping
    +-- voucher
       +-- created-on?                      yang:date-and-time
       +-- expires-on?                      yang:date-and-time
       +-- assertion                        enumeration
       +-- serial-number                    string
       +-- idevid-issuer?                   binary
       +-- pinned-domain-cert?              binary
       +-- domain-cert-revocation-checks?   boolean
       +-- nonce?                           binary
       +-- last-renewal-date?               yang:date-and-time
       +-- pinned-domain-pubk?              binary
       +-- pinned-domain-pubk-sha256?       binary

      SID Assigned to
--------- --------------------------------------------------
     2451 data /ietf-voucher-constrained:voucher
     2452 data /ietf-voucher-constrained:voucher/assertion
     2453 data /ietf-voucher-constrained:voucher/created-on
     2454 data .../domain-cert-revocation-checks
     2455 data /ietf-voucher-constrained:voucher/expires-on
     2456 data /ietf-voucher-constrained:voucher/idevid-issuer
     2457 data .../last-renewal-date
     2458 data /ietf-voucher-constrained:voucher/nonce
     2459 data .../pinned-domain-cert
     2460 data .../pinned-domain-pubk
     2461 data .../pinned-domain-pubk-sha256
     2462 data /ietf-voucher-constrained:voucher/serial-number

<CODE BEGINS> file "ietf-voucher-constrained@2021-04-15.yang"

module ietf-voucher-constrained {
  yang-version 1.1;

  namespace
    "urn:ietf:params:xml:ns:yang:ietf-voucher-constrained";
  prefix "constrained";

  import ietf-restconf {
    prefix rc;
    description
      "This import statement is only present to access
       the yang-data extension defined in RFC 8040.";
    reference "RFC 8040: RESTCONF Protocol";
  }

  import ietf-voucher {
    prefix "v";
  }

  organization
   "IETF ANIMA Working Group";

  contact
   "WG Web:   <http://tools.ietf.org/wg/anima/>
    WG List:  <mailto:anima@ietf.org>
    Author:   Michael Richardson
              <mailto:mcr+ietf@sandelman.ca>
    Author:   Peter van der Stok
              <mailto: consultancy@vanderstok.org>
    Author:   Panos Kampanakis
              <mailto: pkampana@cisco.com>";

description
  "This module defines the format for a voucher, which
   is produced by a pledge's manufacturer or its delegate
   (MASA) to securely assign one or more pledges to an 'owner',
   so that a pledge may establish a secure connection to the
   owner's network infrastructure.

   This version provides a very restricted subset appropriate
   for very constrained devices.
   In particular, it assumes that nonce-ful operation is
   always required, that expiration dates are rather weak, as no
   clocks can be assumed, and that the Registrar is identified
   by either a pinned Raw Public Key of the Registrar, or by a
   pinned X.509 certificate of the Registrar or domain CA.

   The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
   'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'MAY',
   and 'OPTIONAL' in the module text are to be interpreted as
   described in RFC 2119.";

  revision "2021-04-15" {
    description
     "Initial version";
    reference
     "RFC XXXX: Voucher Profile for Constrained Devices";
  }

  rc:yang-data voucher-constrained-artifact {
    // YANG data template for a voucher.
    uses voucher-constrained-grouping;
  }

  // Grouping defined for future usage
  grouping voucher-constrained-grouping {
    description
      "Grouping to allow reuse/extensions in future work.";

    uses v:voucher-artifact-grouping {

      refine voucher/created-on {
          mandatory  false;
      }

      refine voucher/pinned-domain-cert {
          mandatory  false;
      }

      augment "voucher" {
        description "Base the constrained voucher
                                   upon the regular one";
        leaf pinned-domain-pubk {
          type binary;
          description
            "The pinned-domain-pubk may replace the
             pinned-domain-cert in constrained uses of
             the voucher. The pinned-domain-pubk
             is the Raw Public Key of the Registrar.
             This field is encoded as a Subject Public Key Info block
             as specified in RFC7250, in section 3.
             The ECDSA algorithm MUST be supported.
             The EdDSA algorithm as specified in
             draft-ietf-tls-rfc4492bis-17 SHOULD be supported.
             Support for the DSA algorithm is not recommended.
             Support for the RSA algorithm is a MAY.";
        }

        leaf pinned-domain-pubk-sha256 {
          type binary;
          description
            "The pinned-domain-pubk-sha256 is a second
             alternative to pinned-domain-cert.  In many cases the
             public key of the domain has already been transmitted
             during the key agreement process, and it is wasteful
             to transmit the public key another two times.
             The use of a hash of public key info, at 32-bytes for
             sha256 is a significant savings compared to an RSA
             public key, but is only a minor savings compared to
             a 256-bit ECDSA public-key.
             Algorithm agility is provided by extensions to this
             specification which can define a new leaf for another
             hash type.";
        }
      }
    }
  }
}


<CODE ENDS>

{
  2451: {
    +2 : "2016-10-07T19:31:42Z", / SID = 2453, created-on /
    +4 : "2016-10-21T19:31:42Z", / SID = 2455, expires-on /
    +1 : 0,                      / SID = 2452, assertion "verified" /
    +11: "JADA123456789",        / SID = 2462, serial-number /
    +5 : h'E40393B4....68A3',    / SID = 2456, idevid-issuer /
    +8 : h'30820275....C35F',    / SID = 2459, pinned-domain-cert/
    +3 : true,                   / SID = 2454, domain-cert /
                                 /               -revocation-checks /
    +6 : "2017-10-07T19:31:42Z"  / SID = 2457, last-renewal-date /
  }
}

9.3. Signing voucher and voucher-request artifacts with COSE

The COSE_Sign1 structure is discussed in Section 4.2 of [I-D.ietf-cose-rfc8152bis-struct]. The CBOR object that carries the body, the signature, and the information about the body and signature is called the COSE_Sign1 structure. It is used when only one signature is used on the body.¶

Support for ECDSA with SHA2-256 using curve secp256r1 (aka prime256k1) is RECOMMENDED. Most current low power hardware has support for acceleration of this algorithm. Future hardware designs could omit this in favour of a newer algorithms. This is the ES256 keytype from Table 1 of [I-D.ietf-cose-rfc8152bis-algs]. Support for curve secp256k1 is OPTIONAL.¶

Support for EdDSA using Curve 25519 is RECOMMENDED in new designs if hardware support is available. This is keytype EDDSA (-8) from Table 2 of [I-D.ietf-cose-rfc8152bis-algs]. A "crv" parameter is necessary to specify the Curve, which from Table 18. The 'kty' field MUST be present, and it MUST be 'OKP'. (Table 17)¶

A transition towards EdDSA is occuring in the industry. Some hardware can accelerate only some algorithms with specific curves, other hardware can accelerate any curve, and still other kinds of hardware provide a tool kit for acceleration of any eliptic curve algorithm.¶

In general, the Pledge is expected to support only a single algorithm, while the Registrar, usually not constrained, is expected to support a wide variety of algorithms: both legacy ones and up-and-coming ones via regular software updates.¶

An example of the supported COSE_Sign1 object structure is shown in Figure 3.¶

18( / COSE_Sign1 /
  [
    h'A101382E',        / protected header encoding: {1: -47}     /
    {                   /       which means { "alg": ES256K }     /
      4 : h'7890A03F1234'  / 4 is the "kid" binary key identifier /
    },
    h'1234....5678', / voucher-request binary content (CBOR)      /
    h'4567....1234'  / voucher-request binary public signature    /
  ]
)

The [COSE-registry] specifies the integers/encoding for the "alg" and "kid" fields in Figure 3. The "alg" field restricts the key usage for verification of this COSE object to a particular cryptographic algorithm.¶

The "kid" field is optionally present: it is an unprotected field that identifies the public key of the key pair that was used to sign this message. The value of the key identifier "kid" parameter is an example value. Usually a hash of the public key is used to identify the public key, but a device serial number may also be used. The choice of key identifier method is vendor-specific. If "kid" is not present, then a verifying party needs to use other context information to retrieve the right public key to verify the COSE_Sign1 object against. For example, this context information may be a unique serial number encoded in the binary content (CBOR) field.¶

A Registrar MAY use a "kid" parameter in its RVR to identify its signing key as used to sign the RVR. The method of generating this "kid" is vendor-specific and SHOULD be configurable in the Registrar to support commonly used methods. In order to support future business cases and supply chain integrations, a Registrar MUST be configurable, on a per-manufacturer basis, to be able to configure the "kid" to a particular value. Both binary and string values are to be supported, each being inserted using a CBOR bstr or tstr. By default, a Registrar does not include a "kid" parameter in its RVR since the signing key is already identified by the included signing certificates in the COSE "x5bag" structure.¶

A Pledge normally SHOULD NOT use a "kid" parameter in its PVR, because its signing key is already identified by the Pledge's unique serial number that is included in the PVR. Still, where needed the Pledge MAY use a "kid" parameter in its PVR to help the MASA identify the right public key to verify against. This can occur for example if a Pledge has multiple IDevID identities. A Registrar normally SHOULD ignore a "kid" parameter used in a received PVR, as this information is intended for the MASA. In other words, there is no need for the Registrar to verify the contents of this field, but it may include it in an audit log.¶

In Appendix C a binary COSE_Sign1 object is shown based on the voucher-request example of Section 9.1.4.¶

10.1. 6TSCH Deployments

In 6TISCH networks, the Constrained Join Proxy (CoJP) mechanism is described in [RFC9031]. Such networks are expected to use a [I-D.ietf-lake-edhoc] to do key management. This is the subject of future work. The Enhanced Beacon has been extended in [RFC9032] to allow for discovery of the Join Proxy.¶

10.2. Generic networks using GRASP

[RFC8995] defines a mechanism for the Pledge to discover a Join Proxy by listening for [RFC8990] GRASP messages. This mechanism can be used on any network which does not have another more specific mechanism. This mechanism supports mesh networks, and can also be used over unencrypted WIFI.¶

10.3. Generic networks using mDNS

[RFC8995] also defines a non-normative mechanism for the Pledge to discover a Join Proxy by doing mDNS queries. This mechanism can be used on any network which does not have another recommended mechanism. This mechanism does not easily support mesh networks. It can be used over unencrypted WIFI.¶

10.4. Thread networks using Mesh Link Establishment (MLE)

Thread [Thread] is a wireless mesh network protocol based on 6LoWPAN [RFC6282] and other IETF protocols. In Thread, a new device discovers potential Thread networks and Thread routers to join by using the Mesh Link Establishment (MLE) [I-D.ietf-6lo-mesh-link-establishment] protocol. MLE uses the UDP port number 19788. The new device sends discovery requests on different IEEE 802.15.4 radio channels, to which routers (if any present) respond with a discovery response containing information about their respective network. Once a suitable router is selected the new device initiates a DTLS transport-layer secured connection to the network's commissioning application, over a link-local single radio hop to the selected Thread router. This link is not yet secured at the radio level: link-layer security will be set up once the new device is approved by the commissioning application to join the Thread network, and it gets provisioned with network access credentials.¶

The Thread router acts here as a Join Proxy. The MLE discovery response message contains UDP port information to signal the new device which port to use for its DTLS connection.¶

10.5. Non-mesh networks using CoAP Discovery

On unencrypted constrained networks such as 802.15.4, CoAP discover may be done using the mechanism detailed in [I-D.ietf-ace-coap-est] section 5.1.¶

12.1. The Registrar Trust Anchor

When the Pledge first connects to the Registrar, the connection to the Registrar is provisional, as explained in Section 5.6.2 of [RFC8995]. The Registrar provides its public key in a TLSServerCertificate, and the Pledge uses that to validate that integrity of the (D)TLS connection, but it does not validate the identity of the provided certificate.¶

As the TLSServerCertificate object is never verified directly by the pledge, sending it can be considered superfluous. Instead of using a (TLSServer)Certificate of type X509 (see section 4.4.2 of [RFC8446]), a RawPublicKey object is used.¶

A Registrar operating in a mixed environment can determine whether to send a Certificate or a Raw Public key: this is determined by the pledge including the server_certificate_type of RawPublicKey. This is shown in section 5 of [RFC7250].¶

The Pledge continues to send a client_certificate_type of X509, so that the Registrar can properly identify the pledge and distill the MASA URI information from its certificate.¶

12.2. The Pledge Voucher Request

The Pledge puts the Registrar's public key into the proximity-registrar-pubk field of the voucher-request. (The proximity-registrar-pubk-sha256 can also be used if the 32-bytes of a SHA256 hash turns out to be smaller than a typical ECDSA key.)¶

As the format of the pubk field is identical to the TLS Certificate RawPublicKey, no manipulation at all is needed to insert this into a voucher-request.¶

12.3. The Voucher Response

A returned voucher will have a pinned-domain-subk field with the identical key as was found in the proximity-registrar-pubk field above, as well as in the TLS connection.¶

Validation of this key by the pledge is what takes the DTLS connection out of the provisional state see Section 5.6.2 of [RFC8995].¶

The voucher needs to be validated first. The Pledge needs to have a public key to validate the signature from the MASA on the voucher.¶

In certain cases, the MASA's public key counterpart of the (private) signing key is already installed in the Pledge at manufacturing time. In other cases, if the MASA signing key is based upon a PKI (see [I-D.richardson-anima-masa-considerations] Section 2.3), then a certificate chain may need to be included with the voucher in order for the pledge to validate the signature. In CMS signed artifacts, the CMS structure has a place for such certificates.¶

In the COSE-signed Constrained Vouchers described in this document, the x5bag attribute from [I-D.ietf-cose-x509] is to be used for this.¶

14.1. Duplicate serial-numbers

In the absense of correct use of idevid-issuer by the Registrar as detailed in Section 8.4, it would be possible for a malicious Registrar to use an unauthorized voucher for a device. This would apply only to the case where a Manufacturer Authorized Signing Authority (MASA) is trusted by different products from the same manufacturer, and the manufacturer has duplicated serial numbers as a result of a merge, acquisition or mis-management.¶

For example, imagine the same manufacturer makes light bulbs as well as gas centrifuges, and said manufacturer does not uniquely allocate product serial numbers. This attack only works for nonceless vouchers. The attacker has obtained a light bulb which happens to have the same serial-number as a gas centrofuge which it wishes to obtain access. The attacker performs a normal BRSKI onboarding for the light bulb, but then uses the resulting voucher to onboard the gas centrofuge. The attack requires that the gas centrofuge be returned to a state where it is willing to perform a new onboarding operation.¶

This attack is prevented by the mechanism of having the Registrar include the idevid-issuer in the RVR, and the MASA including it in the resulting voucher. The idevid-issuer is not included by default: a MASA needs to be aware if there are parts of the organization which duplicates serial numbers, and if so, include it.¶

14.2. IDevID security in Pledge

TBD.¶

14.3. Security of CoAP and UDP protocols

Section 7.1 explains that no CoAPS version of the BRSKI-MASA protocol is proposed. The connection from the Registrar to the MASA continues to be HTTPS as in [RFC8995]. This has been done to simplify the MASA deployment for the manufacturer, because no new protocol needs to be enabled on the server.¶

The use of UDP protocols across the open Internet is sometimes fraught with security challenges. Denial-of-service attacks against UDP based protocols are trivial as there is no three-way handshake as done for TCP. The three-way handshake of TCP guarantees that the node sending the connection request is reachable using the origin IP address. While DTLS contains an option to do a stateless challenge -- a process actually stronger than that done by TCP -- it is not yet common for this mechanism to be available in hardware at multigigabit speeds. It is for this reason that this document defines using HTTPS for the Registrar to MASA connection.¶

14.4. Registrar Certificate may be self-signed

The provisional (D)TLS connection formed by the Pledge with the Registrar does not authenticate the Registrar's identity. This Registrar's identity is validated by the [RFC8366] voucher that is issued by the MASA, signed with an anchor that was built-in to the Pledge.¶

The Registrar may therefore use any certificate, including a self-signed one. The only restrictions on the certificate is that it MUST have EKU bits set as detailed in Section 7.3.1.¶

14.5. Use of RPK alternatives to proximity-registrar-cert

In Section 9.1 two compact alternative fields for proximity-registrar-cert are defined that include an RPK: proximity-registrar-pubk and proximity-registrar-pubk-sha256. The Pledge can use these fields in its PVR to identify the Registrar based on its public key only. Since the full certificate of the proximate Registrar is not included, use of these fields by a Pledge implies that a Registrar could insert another certificate with the same public key identity into the RVR. For example, an older or a newer version of its certificate. The MASA will not be able to detect such act by the Registrar. But since any 'other' certificate the Registrar could insert in this way still encodes its identity the additional risk of using the RPK alternatives is neglible.¶

When a Registrar sees a PVR that uses one of proximity-registrar-pubk or proximity-registrar-pubk-sha256 fields, this implies the Registrar must include the certificate identified by these fields into its RVR. Otherwise, the MASA is unable to verify proximity. This requirement is already implied by the "MUST" requirement in Section 8.1.¶

14.6. MASA support of CoAPS

The use of CoAP for the BRSKI-MASA connection is not in scope of the current document. The following security considerations have led to this choice of scope:¶

• the technology and experience to build secure Internet-scale HTTPS responders (which the MASA is) is common, while the experience in doing the same for CoAP is much less common.¶
• in many enterprise networks, outgoing UDP connections are often treated as suspicious, which could effectively block CoAP connections for some firewall configurations.¶
• reducing the complexity of MASA (i.e. less protocols supported) would also reduce its potential attack surface, which is relevant since the MASA is 24/7 exposed on the Internet and accepting (untrusted) incoming connections.¶

15.1. Resource Type Registry

Additions to the sub-registry "Resource Type Link Target Attribute Values", within the "CoRE Parameters" IANA registry are specified below.¶

Reference: [This RFC]¶

15.2. The IETF XML Registry

This document registers two URIs in the IETF XML registry [RFC3688]. Following the format in [RFC3688], the following registration is requested:¶

  URI: urn:ietf:params:xml:ns:yang:ietf-voucher-constrained
  Registrant Contact: The ANIMA WG of the IETF.
  XML: N/A, the requested URI is an XML namespace.

  URI: urn:ietf:params:xml:ns:yang:ietf-voucher-request-constrained
  Registrant Contact: The ANIMA WG of the IETF.
  XML: N/A, the requested URI is an XML namespace.

15.3. The YANG Module Names Registry

This document registers two YANG modules in the YANG Module Names registry [RFC6020]. Following the format defined in [RFC6020], the the following registration is requested:¶

  name:         ietf-voucher-constrained
  namespace:    urn:ietf:params:xml:ns:yang:ietf-voucher-constrained
  prefix:       vch
  reference:    RFC XXXX

  name:         ietf-voucher-request-constrained
  namespace:    urn:ietf:params:xml:ns:yang:ietf-voucher-
                                           request-constrained
  prefix:       vch
  reference:    RFC XXXX

15.4. The RFC SID range assignment sub-registry

------------ ------ --------------------------- ------------
Entry-point | Size | Module name               | RFC Number
------------ ------ --------------------------- ------------
2450          50     ietf-voucher-constrained    [This RFC]
2500          50     ietf-voucher-request        [This RFC]
                                 -constrained
----------- ------  --------------------------- ------------

Warning: These SID values are defined in [I-D.ietf-core-sid], not as an Early Allocation.¶

IANA: please update the names in the Registry to match these revised names, if they have not already been revised.¶

15.5. Media Types Registry

This section registers the 'application/voucher-cose+cbor' in the IANA "Media Types" registry. This media type is used to indicate that the content is a CBOR voucher or voucher request signed with a COSE_Sign1 structure [I-D.ietf-cose-rfc8152bis-struct].¶

Type name:  application
Subtype name:  voucher-cose+cbor
Required parameters:  N/A
Optional parameters:  N/A
Encoding considerations:  binary (CBOR)
Security considerations:  Security Considerations of [This RFC].
Interoperability considerations:  The format is designed to be
  broadly interoperable.
Published specification:  [This RFC]
Applications that use this media type:  ANIMA, 6tisch, and other
  zero-touch onboarding systems
Fragment identifier considerations:  The syntax and semantics of
  fragment identifiers specified for application/voucher-cose+cbor
  are as specified for application/cbor.  (At publication of this
  document, there is no fragment identification syntax defined for
  application/cbor.)
Additional information:
  Deprecated alias names for this type: N/A
  Magic number(s):  N/A
  File extension(s):  .vch
  Macintosh file type code(s):  N/A
Person & email address to contact for further information:  IETF
  ANIMA Working Group (anima@ietf.org) or IETF Operations and
  Management Area Working Group (opsawg@ietf.org)
Intended usage:  COMMON
Restrictions on usage:  N/A
Author:  ANIMA WG
Change controller:  IETF
Provisional registration? (standards tree only):  NO

15.6. CoAP Content-Format Registry

One addition to the sub-registry "CoAP Content-Formats", within the "CoRE Parameters" registry is needed for a new content-format. It can be registered in the Expert Review range (0-255) or the IETF Review range (256-9999).¶

Media type                     Encoding   ID   Reference
-----------------------------  --------- ----  ----------
application/voucher-cose+cbor  -         TBD3  [This RFC]

15.7. Update to BRSKI Parameters Registry

This section updates the BRSKI Well-Known URIs sub-registry of the IANA Bootstrapping Remote Secure Key Infrastructures (BRSKI) Parameters Registry by adding a new column "Short URI". The contents of this field MUST be specified for any newly registered URI as follows:¶

Short URI: A short name for the "URI" resource that can be used by a Constrained BRSKI Pledge in a CoAP request to the Registrar. In case the "URI" resource is only used between Registrar and MASA, the value "--" is registered denoting that a short name is not applicable.¶

The initial contents of the sub-registry including the new column are as follows:¶

A.1. OpensSSL

From openssl's apps/verify.c :¶

<CODE BEGINS>
X509 *x = NULL;
int i = 0, ret = 0;
X509_STORE_CTX *csc;
STACK_OF(X509) *chain = NULL;
int num_untrusted;

x = load_cert(file, "certificate file");
if (x == NULL)
    goto end;

csc = X509_STORE_CTX_new();
if (csc == NULL) {
    BIO_printf(bio_err, "error %s: X.509 store context"
               "allocation failed\n",
               (file == NULL) ? "stdin" : file);
    goto end;
}

X509_STORE_set_flags(ctx, vflags);
if (!X509_STORE_CTX_init(csc, ctx, x, uchain)) {
    X509_STORE_CTX_free(csc);
    BIO_printf(bio_err,
               "error %s: X.509 store context"
               "initialization failed\n",
               (file == NULL) ? "stdin" : file);
    goto end;
}
if (tchain != NULL)
    X509_STORE_CTX_set0_trusted_stack(csc, tchain);
if (crls != NULL)
    X509_STORE_CTX_set0_crls(csc, crls);

i = X509_verify_cert(csc);
X509_STORE_CTX_free(csc);

<CODE ENDS>

A.2. mbedTLS

<CODE BEGINS>
mbedtls_x509_crt cert;
mbedtls_x509_crt caCert;
uint32_t         certVerifyResultFlags;
...
int result = mbedtls_x509_crt_verify(&cert, &caCert, NULL, NULL,
                             &certVerifyResultFlags, NULL, NULL);

<CODE ENDS>

B.1. enrollstatus

A coaps enrollstatus message from Pledge to Registrar can be as follows:¶

    POST coaps://192.0.2.1:8085/b/es
      Content-Format: 60
      Payload: <binary CBOR enrollstatus document>

The corresponding CoAP header fields are shown below.¶

  Ver = 1
  T = 0 (CON)
  TKL = 1
  Code = 0x02 (0.02 is POST method)
  Message ID = 0xab0f
  Token = 0x4d
  Options
   Option  (Uri-Path)
     Option Delta = 0xb   (option nr = 11)
     Option Length = 0x1
     Option Value = "b"
   Option  (Uri-Path)
     Option Delta = 0x0   (option nr = 11)
     Option Length = 0x2
     Option Value = "es"
   Option  (Content-Format)
     Option Delta = 0x1   (option nr = 12)
     Option Length = 0x1
     Option Value = 60    (application/cbor)
  Payload Marker = 0xFF
  Payload = A26776657273696F6E0166737461747573F5 (18 bytes binary)

The Uri-Host and Uri-Port Options are omitted because they coincide with the transport protocol (UDP) destination address and port respectively.¶

The above binary CBOR enrollstatus payload looks as follows in CBOR diagnostic notation, for the case of enrollment success:¶

  {
    "version": 1,
    "status": true
   }

Alternatively the payload could look as follows in case of enrollment failure, using the reason field to describe the failure:¶

  Payload = A36776657273696F6E0166737461747573F466726561736F6E782A3C
            496E666F726D61746976652068756D616E207265616461626C652065
            72726F72206D6573736167653E

  {
    "version": 1,
    "status": false,
    "reason": "<Informative human readable error message>"
  }

To indicate successful reception of the enrollmentstatus telemetry report, a response from the Registrar may then be:¶

   2.04 Changed

With CoAP fields:¶

  Ver=1
  T=2 (ACK)
  TKL=1
  Code = 0x44 (2.04 Changed)
  Message ID = 0xab0f
  Token = 0x4d

B.2. voucher_status

A coaps voucher_status message from Pledge to Registrar can be as follows:¶

    POST coaps://[2001:db8::2:1]/.well-known/brski/vs
      Content-Format: 60 (application/cbor)
      Payload:
a46776657273696f6e0166737461747573f466726561736f6e7828496e66
6f726d61746976652068756d616e2d7265616461626c65206572726f7220
6d6573736167656e726561736f6e2d636f6e74657874a100764164646974
696f6e616c20696e666f726d6174696f6e

The request payload above is binary CBOR but represented here in hexadecimal for readability. Below is the equivalent CBOR diagnostic format.¶

{
  "version": 1,
  "status": false,
  "reason": "Informative human-readable error message",
  "reason-context": { 0: "Additional information" }
}

A success response without payload will then be sent by the Registrar back to the Pledge to indicate reception of the telemetry report:¶

   2.04 Changed

C.1. Pledge, Registrar and MASA Keys

This section documents the public and private keys used for all examples in this appendix. These keys are not used in any production system, and must only be used for testing purposes.¶

<CODE BEGINS>
Private-Key: (256 bit)
priv:
    9b:4d:43:b6:a9:e1:7c:04:93:45:c3:13:d9:b5:f0:
    41:a9:6a:9c:45:79:73:b8:62:f1:77:03:3a:fc:c2:
    9c:9a
pub:
    04:d6:b7:6f:74:88:bd:80:ae:5f:28:41:2c:72:02:
    ef:5f:98:b4:81:e1:d9:10:4c:f8:1b:66:d4:3e:5c:
    ea:da:73:e6:a8:38:a9:f1:35:11:85:b6:cd:e2:04:
    10:be:fe:d5:0b:3b:14:69:2e:e1:b0:6a:bc:55:40:
    60:eb:95:5c:54
ASN1 OID: prime256v1
NIST CURVE: P-256
<CODE ENDS>

<CODE BEGINS>
Private-Key: (256 bit)
priv:
    81:df:bb:50:a3:45:58:06:b5:56:3b:46:de:f3:e9:
    e9:00:ae:98:13:9e:2f:36:68:81:fc:d9:65:24:fb:
    21:7e
pub:
    04:50:7a:c8:49:1a:8c:69:c7:b5:c3:1d:03:09:ed:
    35:ba:13:f5:88:4c:e6:2b:88:cf:30:18:15:4f:a0:
    59:b0:20:ec:6b:eb:b9:4e:02:b8:93:40:21:89:8d:
    a7:89:c7:11:ce:a7:13:39:f5:0e:34:8e:df:0d:92:
    3e:d0:2d:c7:b7
ASN1 OID: prime256v1
NIST CURVE: P-256
<CODE ENDS>

<CODE BEGINS>
Private-Key: (256 bit)
priv:
    c6:bb:a5:8f:b6:d3:c4:75:28:d8:d3:d9:46:c3:31:
    83:6d:00:0a:9a:38:ce:22:5c:e9:d9:ea:3b:98:32:
    ec:31
pub:
    04:59:80:94:66:14:94:20:30:3c:66:08:85:55:86:
    db:e7:d4:d1:d7:7a:d2:a3:1a:0c:73:6b:01:0d:02:
    12:15:d6:1f:f3:6e:c8:d4:84:60:43:3b:21:c5:83:
    80:1e:fc:e2:37:85:77:97:94:d4:aa:34:b5:b6:c6:
    ed:f3:17:5c:f1
ASN1 OID: prime256v1
NIST CURVE: P-256
<CODE ENDS>

C.2. Pledge, Registrar and MASA Certificates

All keys and certificates used for the examples have been generated with OpenSSL - see Appendix D for more details on certificate generation. Below the certificates are listed that accompany the keys shown above. Each certificate description is followed by the hexadecimal representation of the X.509 ASN.1 DER encoded certificate. This representation can be for example decoded using an online ASN.1 decoder.¶

<CODE BEGINS>
Certificate:
  Data:
      Version: 3 (0x2)
      Serial Number: 4822678189204992 (0x11223344556600)
      Signature Algorithm: ecdsa-with-SHA256
      Issuer: C=NL, ST=NB, L=Helmond, O=vanderstok, OU=manufacturer,
                                                    CN=masa.stok.nl
      Validity
          Not Before: Dec  9 10:02:36 2020 GMT
          Not After : Dec 31 23:59:59 9999 GMT
      Subject: C=NL, ST=NB, L=Helmond, O=vanderstok, OU=manufacturing,
                 CN=uuid:pledge.1.2.3.4/serialNumber=pledge.1.2.3.4
      Subject Public Key Info:
          Public Key Algorithm: id-ecPublicKey
              Public-Key: (256 bit)
              pub:
                  04:d6:b7:6f:74:88:bd:80:ae:5f:28:41:2c:72:02:
                  ef:5f:98:b4:81:e1:d9:10:4c:f8:1b:66:d4:3e:5c:
                  ea:da:73:e6:a8:38:a9:f1:35:11:85:b6:cd:e2:04:
                  10:be:fe:d5:0b:3b:14:69:2e:e1:b0:6a:bc:55:40:
                  60:eb:95:5c:54
              ASN1 OID: prime256v1
              NIST CURVE: P-256
      X509v3 extensions:
          X509v3 Basic Constraints:
              CA:FALSE
          X509v3 Authority Key Identifier:
              keyid:
      E4:03:93:B4:C3:D3:F4:2A:80:A4:77:18:F6:96:49:03:01:17:68:A3

  Signature Algorithm: ecdsa-with-SHA256
         30:46:02:21:00:d2:e6:45:3b:b0:c3:00:b3:25:8d:f1:83:fe:
         d9:37:c1:a2:49:65:69:7f:6b:b9:ef:2c:05:07:06:31:ac:17:
         bd:02:21:00:e2:ce:9e:7b:7f:74:50:33:ad:9e:ff:12:4e:e9:
         a6:f3:b8:36:65:ab:7d:80:bb:56:88:bc:03:1d:e5:1e:31:6f
<CODE ENDS>

<CODE BEGINS>
30820226308201cba003020102020711223344556600300a06082a8648ce3d04
0302306f310b3009060355040613024e4c310b300906035504080c024e423110
300e06035504070c0748656c6d6f6e6431133011060355040a0c0a76616e6465
7273746f6b31153013060355040b0c0c6d616e75666163747572657231153013
06035504030c0c6d6173612e73746f6b2e6e6c3020170d323031323039313030
3233365a180f39393939313233313233353935395a308190310b300906035504
0613024e4c310b300906035504080c024e423110300e06035504070c0748656c
6d6f6e6431133011060355040a0c0a76616e64657273746f6b31163014060355
040b0c0d6d616e75666163747572696e67311c301a06035504030c1375756964
3a706c656467652e312e322e332e34311730150603550405130e706c65646765
2e312e322e332e343059301306072a8648ce3d020106082a8648ce3d03010703
420004d6b76f7488bd80ae5f28412c7202ef5f98b481e1d9104cf81b66d43e5c
eada73e6a838a9f1351185b6cde20410befed50b3b14692ee1b06abc554060eb
955c54a32e302c30090603551d1304023000301f0603551d23041830168014e4
0393b4c3d3f42a80a47718f6964903011768a3300a06082a8648ce3d04030203
49003046022100d2e6453bb0c300b3258df183fed937c1a24965697f6bb9ef2c
05070631ac17bd022100e2ce9e7b7f745033ad9eff124ee9a6f3b83665ab7d80
bb5688bc031de51e316f
<CODE ENDS>

<CODE BEGINS>
Certificate:
  Data:
      Version: 3 (0x2)
      Serial Number:
        70:56:ea:aa:30:66:d8:82:6a:55:5b:90:88:d4:62:bf:9c:f2:8c:fd
      Signature Algorithm: ecdsa-with-SHA256
      Issuer: C=NL, ST=NB, L=Helmond, O=vanderstok, OU=consultancy,
                                               CN=registrar.stok.nl
      Validity
          Not Before: Dec  9 10:02:36 2020 GMT
          Not After : Dec  9 10:02:36 2021 GMT
      Subject: C=NL, ST=NB, L=Helmond, O=vanderstok, OU=consultancy,
                                                CN=registrar.stok.nl
      Subject Public Key Info:
          Public Key Algorithm: id-ecPublicKey
              Public-Key: (256 bit)
              pub:
                  04:50:7a:c8:49:1a:8c:69:c7:b5:c3:1d:03:09:ed:
                  35:ba:13:f5:88:4c:e6:2b:88:cf:30:18:15:4f:a0:
                  59:b0:20:ec:6b:eb:b9:4e:02:b8:93:40:21:89:8d:
                  a7:89:c7:11:ce:a7:13:39:f5:0e:34:8e:df:0d:92:
                  3e:d0:2d:c7:b7
              ASN1 OID: prime256v1
              NIST CURVE: P-256
      X509v3 extensions:
          X509v3 Subject Key Identifier:
    08:C2:BF:36:88:7F:79:41:21:85:87:2F:16:A7:AC:A6:EF:B3:D2:B3
          X509v3 Authority Key Identifier:
              keyid:
    08:C2:BF:36:88:7F:79:41:21:85:87:2F:16:A7:AC:A6:EF:B3:D2:B3

          X509v3 Basic Constraints: critical
              CA:TRUE
          X509v3 Extended Key Usage:
              CMC Registration Authority, TLS Web Server
              Authentication, TLS Web Client Authentication
          X509v3 Key Usage: critical
              Digital Signature, Non Repudiation, Key Encipherment,
              Data Encipherment, Certificate Sign, CRL Sign
  Signature Algorithm: ecdsa-with-SHA256
       30:44:02:20:74:4c:99:00:85:13:b2:f1:bc:fd:f9:02:1a:46:
       fb:17:4c:f8:83:a2:7c:a1:d9:3f:ae:ac:f3:1e:4e:dd:12:c6:
       02:20:11:47:14:db:f5:1a:5e:78:f5:81:b9:42:1c:6e:47:02:
       ab:53:72:70:c5:ba:fb:2d:16:c3:de:9a:a1:82:c3:5f
<CODE ENDS>

<CODE BEGINS>
308202753082021ca00302010202147056eaaa3066d8826a555b9088d462bf9c
f28cfd300a06082a8648ce3d0403023073310b3009060355040613024e4c310b
300906035504080c024e423110300e06035504070c0748656c6d6f6e64311330
11060355040a0c0a76616e64657273746f6b31143012060355040b0c0b636f6e
73756c74616e6379311a301806035504030c117265676973747261722e73746f
6b2e6e6c301e170d3230313230393130303233365a170d323131323039313030
3233365a3073310b3009060355040613024e4c310b300906035504080c024e42
3110300e06035504070c0748656c6d6f6e6431133011060355040a0c0a76616e
64657273746f6b31143012060355040b0c0b636f6e73756c74616e6379311a30
1806035504030c117265676973747261722e73746f6b2e6e6c3059301306072a
8648ce3d020106082a8648ce3d03010703420004507ac8491a8c69c7b5c31d03
09ed35ba13f5884ce62b88cf3018154fa059b020ec6bebb94e02b8934021898d
a789c711cea71339f50e348edf0d923ed02dc7b7a3818d30818a301d0603551d
0e0416041408c2bf36887f79412185872f16a7aca6efb3d2b3301f0603551d23
04183016801408c2bf36887f79412185872f16a7aca6efb3d2b3300f0603551d
130101ff040530030101ff30270603551d250420301e06082b0601050507031c
06082b0601050507030106082b06010505070302300e0603551d0f0101ff0404
030201f6300a06082a8648ce3d04030203470030440220744c99008513b2f1bc
fdf9021a46fb174cf883a27ca1d93faeacf31e4edd12c60220114714dbf51a5e
78f581b9421c6e4702ab537270c5bafb2d16c3de9aa182c35f
<CODE ENDS>

<CODE BEGINS>
Certificate:
  Data:
      Version: 3 (0x2)
      Serial Number:
        14:26:b8:1c:ce:d8:c3:e8:14:05:cb:87:67:0d:be:ef:d5:81:25:b4
      Signature Algorithm: ecdsa-with-SHA256
      Issuer: C=NL, ST=NB, L=Helmond, O=vanderstok,
          OU=manufacturer, CN=masa.stok.nl

      Validity
          Not Before: Dec  9 10:02:36 2020 GMT
          Not After : Sep  5 10:02:36 2023 GMT
      Subject: C=NL, ST=NB, L=Helmond, O=vanderstok,
          OU=manufacturer, CN=masa.stok.nl
      Subject Public Key Info:
          Public Key Algorithm: id-ecPublicKey
              Public-Key: (256 bit)
              pub:
                  04:59:80:94:66:14:94:20:30:3c:66:08:85:55:86:
                  db:e7:d4:d1:d7:7a:d2:a3:1a:0c:73:6b:01:0d:02:
                  12:15:d6:1f:f3:6e:c8:d4:84:60:43:3b:21:c5:83:
                  80:1e:fc:e2:37:85:77:97:94:d4:aa:34:b5:b6:c6:
                  ed:f3:17:5c:f1
              ASN1 OID: prime256v1
              NIST CURVE: P-256
      X509v3 extensions:
          X509v3 Subject Key Identifier:
    E4:03:93:B4:C3:D3:F4:2A:80:A4:77:18:F6:96:49:03:01:17:68:A3
          X509v3 Authority Key Identifier:
              keyid:
     E4:03:93:B4:C3:D3:F4:2A:80:A4:77:18:F6:96:49:03:01:17:68:A3

          X509v3 Basic Constraints: critical
              CA:TRUE
          X509v3 Extended Key Usage:
              CMC Registration Authority,
              TLS Web Server Authentication,
              TLS Web Client Authentication
          X509v3 Key Usage: critical
              Digital Signature, Non Repudiation, Key Encipherment,
                    Data Encipherment, Certificate Sign, CRL Sign
  Signature Algorithm: ecdsa-with-SHA256
       30:44:02:20:2e:c5:f2:24:72:70:20:ea:6e:74:8b:13:93:67:
       8a:e6:fe:fb:8d:56:7f:f5:34:18:a9:ef:a5:0f:c3:99:ca:53:
       02:20:3d:dc:91:d0:e9:6a:69:20:01:fb:e4:20:40:de:7c:7d:
       98:ed:d8:84:53:61:84:a7:f9:13:06:4c:a9:b2:8f:5c
<CODE ENDS>

<CODE BEGINS>
3082026d30820214a00302010202141426b81cced8c3e81405cb87670dbeefd5
8125b4300a06082a8648ce3d040302306f310b3009060355040613024e4c310b
300906035504080c024e423110300e06035504070c0748656c6d6f6e64311330
11060355040a0c0a76616e64657273746f6b31153013060355040b0c0c6d616e
7566616374757265723115301306035504030c0c6d6173612e73746f6b2e6e6c
301e170d3230313230393130303233365a170d3233303930353130303233365a
306f310b3009060355040613024e4c310b300906035504080c024e423110300e
06035504070c0748656c6d6f6e6431133011060355040a0c0a76616e64657273
746f6b31153013060355040b0c0c6d616e756661637475726572311530130603
5504030c0c6d6173612e73746f6b2e6e6c3059301306072a8648ce3d02010608
2a8648ce3d0301070342000459809466149420303c6608855586dbe7d4d1d77a
d2a31a0c736b010d021215d61ff36ec8d48460433b21c583801efce237857797
94d4aa34b5b6c6edf3175cf1a3818d30818a301d0603551d0e04160414e40393
b4c3d3f42a80a47718f6964903011768a3301f0603551d23041830168014e403
93b4c3d3f42a80a47718f6964903011768a3300f0603551d130101ff04053003
0101ff30270603551d250420301e06082b0601050507031c06082b0601050507
030106082b06010505070302300e0603551d0f0101ff0404030201f6300a0608
2a8648ce3d040302034700304402202ec5f224727020ea6e748b1393678ae6fe
fb8d567ff53418a9efa50fc399ca5302203ddc91d0e96a692001fbe42040de7c
7d98edd884536184a7f913064ca9b28f5c
<CODE ENDS>

C.3. COSE-signed Pledge Voucher Request (PVR)

In this COSE example the voucher request has been signed by the Pledge using the private key of Appendix C.1.1, and has been sent to the link-local JRC (Registrar) over CoAPS.¶

    POST coaps://[JRC-link-local-address]/b/rv
    Content-Format: TBD3
    Payload: signed_request_voucher

The payload signed_request_voucher is shown as hexadecimal dump (with lf added):¶

<CODE BEGINS>
d28444a101382ea104582097113db094eee8eae48683e7337875c0372164
be89d023a5f3df52699c0fbfb55902d2a11909c5a60274323032302d3132
2d32335431323a30353a32325a0474323032322d31322d32335431323a30
353a32325a01020750684ca83e27230aff97630cf2c1ec409a0d6e706c65
6467652e312e322e332e340a590279308202753082021ca0030201020214
7056eaaa3066d8826a555b9088d462bf9cf28cfd300a06082a8648ce3d04
03023073310b3009060355040613024e4c310b300906035504080c024e42
3110300e06035504070c0748656c6d6f6e6431133011060355040a0c0a76
616e64657273746f6b31143012060355040b0c0b636f6e73756c74616e63
79311a301806035504030c117265676973747261722e73746f6b2e6e6c30
1e170d3230313230393130303233365a170d323131323039313030323336
5a3073310b3009060355040613024e4c310b300906035504080c024e4231
10300e06035504070c0748656c6d6f6e6431133011060355040a0c0a7661
6e64657273746f6b31143012060355040b0c0b636f6e73756c74616e6379
311a301806035504030c117265676973747261722e73746f6b2e6e6c3059
301306072a8648ce3d020106082a8648ce3d03010703420004507ac8491a
8c69c7b5c31d0309ed35ba13f5884ce62b88cf3018154fa059b020ec6beb
b94e02b8934021898da789c711cea71339f50e348edf0d923ed02dc7b7a3
818d30818a301d0603551d0e0416041408c2bf36887f79412185872f16a7
aca6efb3d2b3301f0603551d2304183016801408c2bf36887f7941218587
2f16a7aca6efb3d2b3300f0603551d130101ff040530030101ff30270603
551d250420301e06082b0601050507031c06082b0601050507030106082b
06010505070302300e0603551d0f0101ff0404030201f6300a06082a8648
ce3d04030203470030440220744c99008513b2f1bcfdf9021a46fb174cf8
83a27ca1d93faeacf31e4edd12c60220114714dbf51a5e78f581b9421c6e
4702ab537270c5bafb2d16c3de9aa182c35f58473045022063766c7bbd1b
339dbc398e764af3563e93b25a69104befe9aac2b3336b8f56e1022100cd
0419559ad960ccaed4dee3f436eca40b7570b25a52eb60332bc1f2991484
e9
<CODE ENDS>

The Pledge uses the "proximity" (SID 2502, enum 2) assertion together with an included proximity-registrar-cert field (SID 2511) to inform MASA about its proximity to the specific Registrar. The representiation of signed_voucher_request in CBOR diagnostic format is:¶

<CODE BEGINS>
Diagnose(signed_request_voucher) =
18([
h'A101382E',     / {"alg": -47} /
{4: h'97113DB094EEE8EAE48683E7337875C0372164B
      E89D023A5F3DF52699C0FBFB5'},
h'<request_voucher>',  / byte string as detailed below /
h'3045022063766C7BBD1B339DBC398E764AF3563E93B
25A69104BEFE9AAC2B3336B8F56E1022100CD0419559A
D960CCAED4DEE3F436ECA40B7570B25A52EB60332BC1F
2991484E9'
])

Diagnose(request_voucher) =
{2501: {2: "2020-12-23T12:05:22Z",
        4: "2022-12-23T12:05:22Z",
        1: 2,
        7: h'684CA83E27230AFF97630CF2C1EC409A',
        13: "pledge.1.2.3.4",
        10: h'<regis-cert-hex>' / byte string as defined in C.2.2 /
}}
<CODE ENDS>

C.4. COSE-signed Registrar Voucher Request (RVR)

In this example the Registrar's voucher request has been signed by the JRC (Registrar) using the private key from Appendix C.1.2. Contained within this voucher request is the voucher request PVR that was made by the Pledge to JRC. Note that the RVR uses the HTTPS protocol (not CoAP) and corresponding long URI path names as defined in [RFC8995]. The Content-Type and Accept headers indicate the constrained voucher format that is defined in the present document. Because the Pledge used this format in the PVR, the JRC must also use this format in the RVR.¶

    POST https://masa.example.com/.well-known/brski/requestvoucher
    Content-Type: application/voucher-cose+cbor
    Accept: application/voucher-cose+cbor
    Body: signed_masa_request_voucher

The payload signed_masa_voucher_request is shown as hexadecimal dump (with lf added):¶

<CODE BEGINS>
d28444a101382ea1045820e8735bc4b470c3aa6a7aa9aa8ee584c09c1113
1b205efec5d0313bad84c5cd05590414a11909c5a60274323032302d3132
2d32385431303a30333a33355a0474323032322d31322d32385431303a30
333a33355a07501551631f6e0416bd162ba53ea00c2a050d6e706c656467
652e312e322e332e3405587131322d32385431303a30333a33355a075015
51631f6e0416bd162ba53ea00c2a050d6e706c656467652e312e322e332e
3405587131322d32385431303a300000000000000000000000000416bd16
2ba53ea00c2a050d6e706c656467652e312e322e332e3405587131322d32
385431303a09590349d28444a101382ea104582097113db094eee8eae486
83e7337875c0372164be89d023a5f3df52699c0fbfb55902d2a11909c5a6
0274323032302d31322d32385431303a30333a33355a0474323032322d31
322d32385431303a30333a33355a010207501551631f6e0416bd162ba53e
a00c2a050d6e706c656467652e312e322e332e340a590279308202753082
021ca00302010202147056eaaa3066d8826a555b9088d462bf9cf28cfd30
0a06082a8648ce3d0403023073310b3009060355040613024e4c310b3009
06035504080c024e423110300e06035504070c0748656c6d6f6e64311330
11060355040a0c0a76616e64657273746f6b31143012060355040b0c0b63
6f6e73756c74616e6379311a301806035504030c11726567697374726172
2e73746f6b2e6e6c301e170d3230313230393130303233365a170d323131
3230393130303233365a3073310b3009060355040613024e4c310b300906
035504080c024e423110300e06035504070c0748656c6d6f6e6431133011
060355040a0c0a76616e64657273746f6b31143012060355040b0c0b636f
6e73756c74616e6379311a301806035504030c117265676973747261722e
73746f6b2e6e6c3059301306072a8648ce3d020106082a8648ce3d030107
03420004507ac8491a8c69c7b5c31d0309ed35ba13f5884ce62b88cf3018
154fa059b020ec6bebb94e02b8934021898da789c711cea71339f50e348e
df0d923ed02dc7b7a3818d30818a301d0603551d0e0416041408c2bf3688
7f79412185872f16a7aca6efb3d2b3301f0603551d2304183016801408c2
bf36887f79412185872f16a7aca6efb3d2b3300f0603551d130101ff0405
30030101ff30270603551d250420301e06082b0601050507031c06082b06
01050507030106082b06010505070302300e0603551d0f0101ff04040302
01f6300a06082a8648ce3d04030203470030440220744c99008513b2f1bc
fdf9021a46fb174cf883a27ca1d93faeacf31e4edd12c60220114714dbf5
1a5e78f581b9421c6e4702ab537270c5bafb2d16c3de9aa182c35f584730
45022063766c7bbd1b339dbc398e764af3563e93b25a69104befe9aac2b3
336b8f56e1022100cd0419559ad960ccaed4dee3f436eca40b7570b25a52
eb60332bc1f2991484e958473045022100e6b45558c1b806bba23f4ac626
c9bdb6fd354ef4330d8dfb7c529f29cca934c802203c1f2ccbbac89733d1
7ee7775bc2654c5f1cc96afba2741cc31532444aa8fed8
<CODE ENDS>

The representiation of signed_masa_voucher_request in CBOR diagnostic format is:¶

<CODE BEGINS>
Diagnose(signed_registrar_request-voucher)
18([
h'A101382E',     / {"alg": -47} /
h'E8735BC4B470C3AA6A7AA9AA8EE584C09C11131B205EFEC5D0313BAD84
C5CD05'},
h'<registrar_request_voucher>', / byte string as detailed below /
h'3045022100E6B45558C1B806BBA23F4AC626C9BDB6FD354EF4330D8DFB
7C529F29CCA934C802203C1F2CCBBAC89733D17EE7775BC2654C5F1CC96A
FBA2741CC31532444AA8FED8'
])

Diagnose(registrar_request_voucher)
{2501:
    {2: "2020-12-28T10:03:35Z",
     4: "2022-12-28T10:03:35Z",
     7: h'1551631F6E0416BD162BA53EA00C2A05',
    13: "pledge.1.2.3.4",
     5: h'31322D32385431303A30333A33355A07501551631F6E0416BD
          162BA53EA00C2A050D6E706C656467652E312E322E332E3405
          587131322D32385431303A3000000000000000000000000004
          16BD162BA53EA00C2A050D6E706C656467652E312E322E332E
          3405587131322D32385431303A', / idevid-issuer /
     9: h'<prior-pvr>'  / prior-signed-voucher-request = PVR /
     }
}
<CODE ENDS>

C.5. COSE-signed Voucher from MASA

The resulting voucher is created by the MASA and returned via the JRC to the Pledge. It is signed by the MASA's private key (see Appendix C.1.3) and can be verified by the Pledge using the MASA's public key that it stores.¶

Below is the binary signed_voucher, encoded in hexadecimal (with lf added):¶

<CODE BEGINS>
d28444a101382ea104582039920a34ee92d3148ab3a729f58611193270c9
029f7784daf112614b19445d5158cfa1190993a70274323032302d31322d
32335431353a30333a31325a0474323032302d31322d32335431353a3233
3a31325a010007506508e06b2959d5089d7a3169ea889a490b6e706c6564
67652e312e322e332e340858753073310b3009060355040613024e4c310b
300906035504080c024e423110300e06035504070c0748656c6d6f6e6431
133011060355040a0c0a76616e64657273746f6b31143012060355040b0c
0b636f6e73756c74616e6379311a301806035504030c1172656769737472
61722e73746f6b2e6e6c03f458473045022022515d96cd12224ee5d3ac67
3237163bba24ad84815699285d9618f463ee73fa022100a6bff9d8585c1c
9256371ece94da3d26264a5dfec0a354fe7b3aef58344c512f
<CODE ENDS>

The representiation of signed_voucher in CBOR diagnostic format is:¶

<CODE BEGINS>
Diagnose(signed_voucher) =
18([
h'A101382E',     / {"alg": -47} /
{4: h'39920A34EE92D3148AB3A729F58611193270C9029F7784DAF112614B194
45D51'},
h'<voucher>',    / byte string as detailed below /
h'3045022022515D96CD12224EE5D3AC673237163BBA24AD84815699285D9618F
463EE73FA022100A6BFF9D8585C1C9256371ECE94DA3D26264A5DFEC0A354FE7B
3AEF58344C512F'
])

Diagnose(voucher) =
{2451:
   {2: "2020-12-23T15:03:12Z",
    4: "2020-12-23T15:23:12Z",
    1: 0,
    7: h'6508E06B2959D5089D7A3169EA889A49',
   11: "pledge.1.2.3.4",
    8: h'<regis-cert-hex>', / as detailed in C.2.2 /
    3: false}
}
<CODE ENDS>

In above, regis-cert-hex represents the hexadecimal encoding of the Registrar certificate of Appendix C.2.2.¶

E.1. Minimal Pledge

The Minimal Pledge profile (Min) aims to reduce code size and hardware cost to a minimum. This comes with some severe functional restrictions, in particular:¶

• No support for EST re-enrollment: whenever this would be needed, a factory reset followed by a new bootstrap process is required.¶
• No support for change of Registrar: for this case, a factory reset followed by a new bootstrap process is required.¶

This profile would be appropriate for single-use devices which must be replaced rather than re-deployed. That might include medical devices, but also sensors used during construction, such as concrete temperature sensors.¶

E.2. Typical Pledge

The Typical Pledge profile (Typ) aims to support a typical Constrained BRSKI feature set including EST re-enrollment support and Registrar changes.¶

E.3. Full-featured Pledge

The Full-featured Pledge profile (Full) illustrates a Pledge category that supports multiple bootstrap methods, hardware real-time clock, BRSKI/EST resource discovery, and CSR Attributes request/response. It also supports most of the optional features defined in this specification.¶

E.4. Comparison Chart of Pledge Classes

The below table specifies the functions implemented in the three example Pledge classes Min, Typ and Full.¶

Notes: (1) is possible only by doing a factory-reset followed by a new bootstrap procedure.¶