Internet-Draft | Establishing Local DNS Authority | June 2022 |
Reddy, et al. | Expires 26 December 2022 | [Page] |
When split-horizon DNS is deployed by a network, certain domains can be resolved authoritatively by the network-provided DNS resolver. DNS clients that don't always use this resolver might wish to do so for these domains. This specification describes how clients can confirm the local resolver's authority over these domains.¶
This note is to be removed before publishing as an RFC.¶
Discussion of this document takes place on the Adaptive DNS Discovery Working Group mailing list (add@ietf.org), which is archived at https://mailarchive.ietf.org/arch/browse/add/.¶
Source for this draft and an issue tracker can be found at https://github.com/ietf-wg-add/draft-ietf-add-split-horizon-authority.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 26 December 2022.¶
Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
To resolve a DNS query, there are three essential behaviors that an implementation can apply: (1) answer from a local database, (2) query the relevant authorities and their parents, or (3) ask a server to query those authorities and return the final answer. Implementations that use these behaviors are called "authoritative nameservers", "full resolvers", and "forwarders" (or "stub resolvers"). However, an implementation can also implement a mixture of these behaviors, depending on a local policy, for each query. We term such an implementation a "hybrid resolver".¶
Most DNS resolvers are hybrids of some kind. For example, stub resolvers frequently support a local "hosts file" that preempts query forwarding, and most DNS forwarders and full resolvers can also serve responses from a local zone file. Other standardized hybrid resolution behaviors include Local Root [RFC8806], mDNS [RFC6762], and NXDOMAIN synthesis for .onion [RFC7686].¶
In many network environments, the network offers clients a DNS server (e.g. DHCP OFFER, IPv6 Router Advertisement). Although this server is formally specified as a recursive resolver (e.g. Section 5.1 of [RFC6106]), some networks provide a hybrid resolver instead. If this resolver acts as an authoritative server for some names, we say that the network has "split-horizon DNS", because those names resolve in this way only from inside the network.¶
Network clients that use pure stub resolution, sending all queries to the network-provided resolver, will always receive the split-horizon results. Conversely, clients that send all queries to a different resolver or implement pure full resolution locally will never receive them. Clients that strictly implement either of these resolution behaviors are out of scope for this specification. Instead, this specification enables hybrid clients to access split-horizon results from a network-provided hybrid resolver, while using a different resolution method for some or all other names.¶
There are several existing mechanisms for a network to provide clients with "local domain hints", listing domain names that have special treatment in this network (Section 4). However, none of the local domain hint mechanisms enable clients to determine whether this special treatment is authorized by the domain owner. Instead, these specifications require clients to make their own determinations about whether to trust and rely on these hints.¶
This specification describes a protocol between domains, networks, and clients that allows the network to establish its authority over a domain to a client (Section 5). Clients can use this protocol to confirm that a local domain hint was authorized by the domain (Section 6), which might influence its processing of that hint.¶
This specification relies on securely identified local DNS servers and globally valid NS records. Use of this specification is therefore limited to servers that support authenticated encryption and split-horizon DNS names that are properly rooted in the global DNS.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119][RFC8174] when, and only when, they appear in all capitals, as shown here.¶
This document makes use of the terms defined in [RFC8499], e.g. "Global DNS". The following additional terms are used throughout the document:¶
The protocol in this document is designed to support the ability of a domain owner to create or authorize a split-horizon view of their domain. The protocol does not support split-horizon views created by any other entity. Thus, DNS filtering is not enabled by this protocol.¶
The protocol is applicable to any type of network offering split-horizon DNS configuration. The endpoint does not need any prior configuration to confirm that a local domain hint was indeed authorized by the domain.¶
There are various mechanisms by which a network client might learn "local domain hints", which indicate a special treatment for particular domain names upon joining a network. This section provides a review of some common and standardized mechanisms for receiving domain hints.¶
There are several DHCP options that convey local domain hints of different kinds. The most directly relevant is RDNSS Selection [RFC6731], which provides "a list of domains ... about which the RDNSS has special knowledge", along with a "High", "Medium", or "Low" preference for each name. The specification notes the difficulty of relying on these hints without validation:¶
Trustworthiness of an interface and configuration information received over the interface is implementation and/or node deployment dependent, and the details of determining that trust are beyond the scope of this specification.¶
Other local domain hints in DHCP include the "Domain Name" [RFC2132], "Access Network Domain Name" [RFC5986], "Client FQDN" [RFC4702][RFC4704], and "Name Service Search" [RFC2937] options. This specification may help clients to interpret these hints. For example, a rogue DHCP server could use the "Client FQDN" option to assign a client the name "www.example.com" in order to prevent the client from reaching the true "www.example.com". A client could use this specification to check the network's authority over this name, and adjust its behavior to avoid this attack if authority is not established.¶
The Domain Search option [RFC3397][RFC3646], which offers clients a way to expand short names into Fully Qualified Domain Names, is not a "local domain hint" by this definition, because it does not modify the processing of any specific domain. (The specification notes that this option can be a "fruitful avenue of attack for a rogue DHCP server", and provides a number of cautions against accepting it unconditionally.)¶
A host can be configured with DNS information when it joins a
network, including when it brings up VPN (which is also considered
joining a(n additional) network, detailed in Section 8). Existing implementations determine the host has
joined a certain network via SSID, IP subnet assigned, DNS server IP
address or name, and other similar mechanisms. For example, one
existing implementation determines the host has joined an internal
network because the DHCP-assigned IP address belongs to the company's
IP range (as assigned by the regional IP addressing authority) and
the DHCP-advertised DNS IP address is one used by IT at that network.
Other mechanisms exist in other products but are not interesting to
this specification; rather what is interesting is this step to
determine "we have joined the internal corporate network" occurred and
the DNS server is configured as authoritative for certain DNS zones
(e.g., *.example.com
).¶
Because a rogue network can simulate all or most of the above characteristics, this specification details how to validate these claims in Section 6.¶
Provisioning Domains (PvDs) are defined in [RFC7556] as sets of network configuration information that clients can use to access networks, including rules for DNS resolution and proxy configuration. The PvD Key "dnsZones" is defined in [RFC8801] as a list of "DNS zones searchable and accessible" in this provisioning domain. Attempting to resolve these names via another resolver might fail or return results that are not correct for this network.¶
In IKEv2 VPNs, the INTERNAL_DNS_DOMAIN configuration attribute can be used to indicate that a domain is "internal" to the VPN [RFC8598]. To prevent abuse, the specification notes various possible restrictions on the use of this attribute:¶
If a client is configured by local policy to only accept a limited set of INTERNAL_DNS_DOMAIN values, the client MUST ignore any other INTERNAL_DNS_DOMAIN values. ([RFC8598], Section 5)¶
IKE clients MAY want to require whitelisted domains for Top-Level Domains (TLDs) and Second-Level Domains (SLDs) to further prevent malicious DNS redirections for well-known domains. ([RFC8598], Section 9)¶
Within these guidelines, a client could adopt a local policy of accepting INTERNAL_DNS_DOMAIN values only when it can validate the local DNS server's authority over those names as described in this specification.¶
To establish its authority over some DNS zone, a participating network MUST offer one or more encrypted resolvers via DNR [I-D.ietf-add-dnr] or an equivalent mechanism (see Section 8). At least one of these resolvers' Authentication Domain Names (ADNs) MUST appear in an NS record for that zone. This arrangement establishes this resolver's authority over the zone.¶
To validate the network's authority over a domain name, participating clients MUST resolve the NS record for that name. If the resolution result is NODATA, the client MUST remove the last label and repeat the query until a response other than NODATA is received.¶
Once the NS record has been resolved, the client MUST check if each local encrypted resolver's Authentication Domain Name appears in the NS record. The client SHALL regard each such resolver as authoritative for the zone of this NS record.¶
Each validation of authority applies only to the specific resolvers whose names appear in the NS RRSet. If a network offers multiple encrypted resolvers, each DNS entry may be authorized for a distinct subset of the network-provided resolvers.¶
A zone is termed a "Validated Split-Horizon zone" after successful validation using a "tamperproof" NS resolution method, i.e. a method that is not subject to interference by the local network operator. Two possible tamperproof resolution methods are presented below.¶
This method applies only if the client is already configured with a default resolution strategy that sends queries to a resolver outside of the network over a secure transport. That resolution strategy is considered "tamperproof" because any actor who could modify the NS response could already modify all of the user's other DNS responses.¶
To ensure that this assumption holds, clients MUST NOT relax the acceptance rules they would otherwise apply when using this resolver. For example, if the client would check the AD bit or validate RRSIGs locally when using this resolver, it must also do so when resolving NS records for this purpose. Alternatively, a client might perform DNSSEC validation for the NS query used for this purpose even if it has disabled DNSSEC validation for other DNS queries.¶
The client resolves the NS record using any resolution method of its choice (e.g. querying one of the network-provided resolvers, performing iterative resolution locally), and performs full DNSSEC validation locally [RFC6698]. The result is processed based on its DNSSEC validation state ([RFC4035], Section 4.3):¶
Two examples are shown below. The first example shows a company
with an internal-only DNS server that claims the entire zone for that
company (e.g., *.example.com
). In the second example, the
internal servers resolves only a
subdomain of the company's zone (e.g., *.internal.example.com
).¶
Consider an organization that operates "example.com", and runs a different version of its global domain on its internal network. Today, on the Internet it publishes two NS records, "ns1.example.com" and "ns2.example.com".¶
First, the host and network both need to support one of the discovery mechanisms described in Section 4. Figure 1 shows discovery using DNR and PvD.¶
Validation is then perfomed using either an external resolver (Section 7.1.1) or DNSSEC (Section 7.1.2).¶
pvd.example.com
.¶
Steps 6-7: The client connects to the PvD server, validates its certificate, and retrieves the provisioning domain JSON information indicated by the associated PvD. The PvD contains:¶
{ "identifier": "pvd.example.com", "expires": "2020-05-23T06:00:00Z", "prefixes": ["2001:db8:1::/48", "2001:db8:4::/48"], "dnsZones": ["example.com"] }¶
The JSON keys "identifier", "expires", and "prefixes" are defined in [RFC8801].¶
The figure below shows the steps performed to verify the local claims of DNS authority using an external resolver.¶
example.com
, which was
retrieved from an external resolver over a secure transport,
so these ADNs are authorized. When the client connects using an
encrypted transport as indicated in DNR [I-D.ietf-add-dnr], it will authenticate
the server to its name using TLS ([RFC8310], Section 8), and send queries to resolve
any names that fall within the dnsZones from PvD.¶
The figure below shows the steps performed to verify the local claims of DNS authority using DNSSEC.¶
example.com
, so these ADNs are authorized.
When the client connects using an encrypted transport as indicated
in DNR [I-D.ietf-add-dnr], it will authenticate
the server to its name using TLS ([RFC8310], Section 8), and send queries to resolve
any names that fall within the dnsZones from PvD.¶
In many split-horizon deployments, all non-public domain names are
placed in a separate child zone (e.g., internal.example.com
).
In this configuration, the message flow is similar to Section 7.1, except that queries for hosts not within the
subdomain (e.g., www.example.com
) are sent to the
external resolver rather than resolver for internal.example.com.¶
As in Section 7.1, the internal DNS server will need a certificate signed by a CA trusted by the client.¶
When the VPN tunnel is IPsec, the encrypted DNS resolver hosted by the VPN service provider can be securely discovered by the endpoint using the ENCDNS_IP*_* IKEv2 Configuration Payload Attribute Types defined in [I-D.ietf-ipsecme-add-ike].¶
Other VPN tunnel types have similar configuration capabilities, not detailed here.¶
This specification does not alter DNSSEC validation behaviour. To ensure compatibility with validating clients, network operators MUST ensure that names under the split-horizon are correctly signed or place them in an unsigned zone.¶
If an internal zone name (e.g., internal.example.com
) is used with
this specification and a public certificate is obtained
for validation, that internal zone name will exist in Certificate Transparency
logs [RFC9162]. In order to not leak the internal domains to
an external resolver, the internal domains can be kept in a child zone of the
local domain hints advertised by the network. For example, if the PvD "dnsZones"
entry is "internal.example.com" and the network-provided DNS resolver is
"ns1.internal.example.com", the network operator can structure the internal
domain names as "private1.internal.example.com", "private2.internal.example.com",
etc. The network-designated resolver will be used to resolve the subdomains of
the local domain hint "*.internal.example.com". Further, adversaries that monitor
a network such as through passive monitoring or active probing of protocols,
such as DHCP will only learn the local domain hints but not learn the labels below internal.example.com.
However, security by obscurity may not maintain or increase the security of the
internal domain names, as they may be leaked in various other ways
(e.g., browser reload).¶
This document has no IANA actions.¶
Thanks to Mohamed Boucadair, Jim Reid, Tommy Pauly, Paul Vixie, Paul Wouters, Michael Richardson and Vinny Parla for the discussion and comments.¶