Internet-Draft | Encryption Key Derivation in CMS | January 2024 |
Housley | Expires 6 July 2024 | [Page] |
This document specifies the derivation of the content-encryption key or the content-authenticated-encryption key in the Cryptographic Message Syntax (CMS). The use of this mechanism provides protection against where the attacker manipulates the content-encryption algorithm identifier or the content-authenticated-encryption algorithm identifier.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 6 July 2024.¶
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
This document specifies the derivation of the content-encryption key for the Cryptographic Message Syntax (CMS) enveloped-data content type [RFC5652], the content-encryption key for the CMS encrypted-data content type [RFC5652], or the content-authenticated-encryption key for the authenticated-enveloped-data content type [RFC5083].¶
The use of this mechanism provides protection against where the attacker manipulates the content-encryption algorithm identifier or the content-authenticated-encryption algorithm identifier. Johannes Roth and Falko Strenzke presented such an attack at IETF 118 [RS2023], where:¶
The attacker intercepts a CMS Authenticated-Enveloped-Data content [RFC5083] that uses either AES-CCM or AES-GCM [RFC5084].¶
The attacker turns the intercepted content into a "garbage" CMS Enveloped-Data content Section 6 of [RFC5652] that is composed of AES-CBC guess blocks.¶
The attacker sends the "garbage" message to the victim, and the victim reveals the result of the decryption to the attacker.¶
If any of the transformed plaintext blocks match the guess for that block, then the attacker learns the plaintext for that block.¶
With highly structured messages, one block can reveal the only sensitive part of the original message.¶
This attack is thwarted if the encryption key depends upon the delivery of the unmodified algorithm identifier.¶
The mitigation for this attack has three parts:¶
Potential recipients include the id-alg-cek-hkdf-sha256 algorithm identifier (with no parameters) in S/MIME Capabilities to indicate support for this mitigation.¶
As a flag to the recipient that this mitigation is being used, carry the id-alg-cek-hkdf-sha256 algorithm identifier as the contentEncryptionAlgorithm in the EncryptedContentInfo structure. This structure is used in the enveloped-data content type, the encrypted-data content type, and the authenticated-enveloped-data content type. The parameters field of the id-alg-cek-hkdf-sha256 algorithm identifier identifies the content-encryption algorithm or the content-authenticated-encryption algorithm and any associated parameters.¶
Perform encryption with a derived content-encryption key or content-authenticated-encryption key:¶
CEK' = HKDF(CEK, AlgorithmIdentifier)¶
CMS values are generated using ASN.1 [X680], using the Basic Encoding Rules (BER) and the Distinguished Encoding Rules (DER) [X690].¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
The mitigation uses the HMAC-based Extract-and-Expand Key Derivation Function (HKDF) [RFC5869] to derive output keying materiam (OKM) from input key material (IKM). HKDF is used with the SHA-256 hash function [FIPS180]. The derivation includes the DER-encoded AlgoritmIdentifier as the optional info input value. This AlgoritmIdentifier is carried as the parameter to the id-alg-cek-hkdf-sha256 algorithm identifier. If an attacker were to change the originator-provided AlgoritmIdentifier, then the recipient will derive a different content-encryption key or content-authenticated-encryption key.¶
The CMS_CEK_HKDF_SHA256 function uses the HKDF-Extract and HKDF-Expand functions to derive the OKM from the IKM:¶
Inputs: IKM input keying material info DER-encoded AlgoritmIdentifier Output: OKM output keying material (same size as IKM) The output OKM is calculated as follows: OKM_SIZE = len(IKM) IF OKM_SIZE > 8160 THEN raise error salt = "The Cryptographic Message Syntax" PRK = HKDF-Extract(salt, IKM) OKM = HKDF-Expand(PRK, info, OKM_SIZE)¶
The id-alg-cek-hkdf-sha256 algoritm identifier indicates that the CMS_CEK_HKDF_SHA256 function defined in Section 2 is used to derive the content-encryption key or the content-authenticated-encryption key.¶
The following object identifier identifies the id-alg-cek-hkdf-sha256 algorithm:¶
id-alg-cek-hkdf-sha256 OBJECT IDENTIFIER ::= { TBD1 }¶
The id-alg-cek-hkdf-sha256 parameters field has an ASN.1 type of AlgorithmIdentifier.¶
Using the conventions from [RFC5911], the id-alg-cek-hkdf-sha256 algorithm identifier is defined as:¶
ContentEncryptionAlgorithmIdentifier ::= AlgorithmIdentifier{CONTENT-ENCRYPTION, { ... } } cea-CEKHKDFSHA256 CONTENT-ENCRYPTION ::= { IDENTIFIER id-alg-cek-hkdf-sha256 PARAMS TYPE ContentEncryptionAlgorithmIdentifier ARE required SMIME-CAPS { IDENTIFIED BY id-alg-cek-hkdf-sha256 } }¶
The SMIMECapabilities Attribute is defined in Section 2.5.2 of [RFC8551]. An S/MIME client announces the set of cryptographic functions it supports using the SMIMECapabilities attribute.¶
If an S/MIME client supports the mechanism in this document, the id-alg-cek-hkdf-sha256 object identifier SHOULD be included in the set of cryptographic functions. The parameter with this encoding MUST be absent.¶
The encoding for id-alg-cek-hkdf-sha256, in hexadecimal, is:¶
30 TBD¶
This section describes the originator and recipient processing to implement this mitigation for each of the CMS encrypting content types.¶
The fourth step of constructing an Enveloped-data is repeated below from Section 6 of [RFC5652]:¶
4. The content is encrypted with the content-encryption key. Content encryption may require that the content be padded to a multiple of some block size; see Section 6.3 of [RFC5652].¶
To implement this mitigation, the originator expands this step as follows:¶
Include the id-alg-cek-hkdf-sha256 algorithm identifier in the contentEncryptionAlgorithm.algorithm field of the EncryptedContentInfo structure, and set the contentEncryptionAlgorithm.parameters field to the AlgorithmIdentifier for the content-encryption algorithm that will be used to encrypt the content, including both the algorithm and optional parameters.¶
Derive the new content-encryption key (CEK') from the original content-encryption key (CEK) and the ContentEncryptionAlgorithmIdentifier, which is carried in the contentEncryptionAlgorithm.parameters field:¶
CEK' = CMS_CEK_HKDF_SHA256(CEK, ContentEncryptionAlgorithmIdentifier)¶
The content is encrypted with the new content-encryption key (CEK'). Content encryption may require that the content be padded to a multiple of some block size; see Section 6.3 of [RFC5652].¶
The presence of the id-alg-cek-hkdf-sha256 algorithm identifier in the contentEncryptionAlgorithm.algorithm field of the EncryptedContentInfo structure tells the recipient to derive the new content-encryption key (CEK') as shown above, and then use it for decryption of the EncryptedContent. If the id-alg-cek-hkdf-sha256 algorithm identifier is not present in the contentEncryptionAlgorithm.algorithm field of the EncryptedContentInfo structure, then the recipient uses the original content-encryption key (CEK) for decryption of the EncryptedContent.¶
As specified in Section 8 of [RFC5652], the content-encryption key is managed by other means.¶
To implement this mitigation, the originator performs the following:¶
Include the id-alg-cek-hkdf-sha256 algorithm identifier in the contentEncryptionAlgorithm.algorithm field of the EncryptedContentInfo structure, and set the contentEncryptionAlgorithm.parameters field to the AlgorithmIdentifier for the content-encryption algorithm that will be used to encrypt the content, including both the algorithm and optional parameters.¶
Derive the new content-encryption key (CEK') from the original content-encryption key (CEK) and the ContentEncryptionAlgorithmIdentifier, which is carried in the contentEncryptionAlgorithm.parameters field:¶
CEK' = CMS_CEK_HKDF_SHA256(CEK, ContentEncryptionAlgorithmIdentifier)¶
The content is encrypted with the new content-encryption key (CEK'). Content encryption may require that the content be padded to a multiple of some block size; see Section 6.3 of [RFC5652].¶
The presence of the id-alg-cek-hkdf-sha256 algorithm identifier in the contentEncryptionAlgorithm.algorithm field of the EncryptedContentInfo structure tells the recipient to derive the new content-encryption key (CEK') as shown above, and then use it for decryption of the EncryptedContent. If the id-alg-cek-hkdf-sha256 algorithm identifier is not present in the contentEncryptionAlgorithm.algorithm field of the EncryptedContentInfo structure, then the recipient uses the original content-encryption key (CEK) for decryption of the EncryptedContent.¶
The fifth step of constructing an Authenticated-Enveloped-Data is repeated below from Section 2 of [RFC5083]:¶
5. The attributes collected in step 4 are authenticated and the CMS content is authenticated and encrypted with the content- authenticated-encryption key. If the authenticated encryption algorithm requires either the additional authenticated data (AAD) or the content to be padded to a multiple of some block size, then the padding is added as described in Section 6.3 of [RFC5652].¶
To implement this mitigation, the originator expands this step as follows:¶
Include the id-alg-cek-hkdf-sha256 algorithm identifier in the contentEncryptionAlgorithm.algorithm field of the EncryptedContentInfo structure, and set the contentEncryptionAlgorithm.parameters field to the AlgorithmIdentifier for the content-authenticated-encryption algorithm that will be used for authenticated encryption of the content, including both the algorithm and optional parameters.¶
Derive the new content-authenticated-encryption key (CEK') from the original content-authenticated-encryption key (CEK) and the ContentEncryptionAlgorithmIdentifier:¶
CEK' = CMS_CEK_HKDF_SHA256(CEK, ContentEncryptionAlgorithmIdentifier)¶
The attributes collected in step 4 are authenticated and the CMS content is authenticated and encrypted with the new content-authenticated-encryption key (CEK'). If the authenticated encryption algorithm requires either the additional authenticated data (AAD) or the content to be padded to a multiple of some block size, then the padding is added as described in Section 6.3 of [RFC5652].¶
The presence of the id-alg-cek-hkdf-sha256 algorithm identifier in the contentEncryptionAlgorithm.algorithm field of the EncryptedContentInfo structure tells the recipient to derive the new content-authenticated-encryption key (CEK') as shown above, and then use it for authenticated decryption of the EncryptedContent and the authentication of the AAD. If the id-alg-cek-hkdf-sha256 algorithm identifier is not present in the contentEncryptionAlgorithm.algorithm field of the EncryptedContentInfo structure, then the recipient uses the original content-authenticated-encryption (CEK) for decryption and authentication of the EncryptedContent and the authentication of the AAD.¶
This mitigation always uses HKDF with SHA-256. One KDF algorithm was selected to avoid the need for negotiation. In the future, if a weakness is found in the KDF algorithm, a new attribute will need to be assigned for use with an alternative KDF algorithm.¶
If the attacker removes the id-alg-cek-hkdf-sha256 object identifier from the contentEncryptionAlgorithm.algorithm field of the EncryptedContentInfo structure prior to delivery to the recipient, then the recipient will not attempt to derive CEK', which will deny the recipient access to the content, but will not assist the attacker in recovering the plaintext content.¶
If the attacker changes contentEncryptionAlgorithm.parameters field of the EncryptedContentInfo structure prior to delivery to the recipient, then the recipient will derive a different CEK', which will not assist the attacker in recovering the plaintext content. Providing the object identifier as an inout to the key derivation function is sufficient to mitigate the attack described in [RS2023], but this mitigation includes both the object identifier and the parameters to protect against some yet-to-be-discovered attack that only manipulates the parameters.¶
Implementations MUST protect the content-encryption keys and content-authenticated-encryption keys, this includes the CEK and CEK'. Compromise of a content-encryption key may result in disclosure of the associated encrypted content. Compromise of a content-authenticated-encryption key may result in disclosure of the associated encrypted content or allow modification of the authenticated content and the additional authenticated data (AAD).¶
Implementations MUST randomly generate content-encryption keys and content-authenticated-encryption keys. Using an inadequate pseudo-random number generator (PRNG) to generate cryptographic keys can result in little or no security. An attacker may find it much easier to reproduce the PRNG environment that produced the keys, and then searching the resulting small set of possibilities, rather than brute force searching the whole key space. The generation of quality random numbers is difficult. [RFC4086] offers important guidance on this topic.¶
If the message-digest attribute is included in the AuthAttributes, then the attribute value will contain the unencrypted one-way hash value of the plaintext of the content. Disclosure of this hash value enables content tracking, and it can be used to determine if the content matches one or more candidates. For these reasons, the AuthAttributes SHOULD NOT contain the message-digest attribute.¶
CMS is often used to provide encryption in messaging environments, where various forms of unsolicited messages (such as spam and phishing) represent a significant volume of unwanted traffic. Mitigation strategies for unwanted message traffic involve analysis of message content plaintext. When recipients accept unsolicited encrypted messages, they become even more vulnerable to unwanted traffic since many mitigation strategies will be unable to access the message content plaintext. Therefore, software that receives messages that have been encrypted using CMS ought to provide alternate mechanisms to handle the unwanted message traffic. One approach that does not require disclosure of keying material to a server is to reject or discard encrypted messages unless they purport to come from a member of a previously approved originator list.¶
For the ASN.1 Module in the Appendix A of this document, IANA is requested to assign an object identifier (OID) for the module identifier (TBD0) with a Description of "id-mod-CMS-CEK-HKDF-SHA256-2023". The OID for the module should be allocated in the "SMI Security for S/MIME Module Identifier" registry (1.2.840.113549.1.9.16.0).¶
For the id-alg-cek-hkdf-sha256 algorithm identifier in Section 3 of this document, IANA is requested to assign an object identifier (OID) (TBD1) with a Description of "id-alg-cek-hkdf-sha256". The OID for the algoritm should be allocated in the "SMI Security for S/MIME Algorithms" registry (1.2.840.113549.1.9.16.3).¶
Thanks to Mike Ounsworth, Carl Wallace, and Joe Mandel their careful review and constructive comments.¶
This ASN.1 Module builds upon the conventions established in [RFC5911] and [RFC5912].¶
<CODE STARTS> CMS-CEK-HKDF-SHA256-Module-2024 { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs9(9) id-smime(16) id-mod(0) id-mod-CMS-CEK-HKDF-SHA256-2024(TBD0) } DEFINITIONS IMPLICIT TAGS ::= BEGIN EXPORTS ALL; IMPORTS AlgorithmIdentifier{}, CONTENT-ENCRYPTION, SMIME-CAPS FROM AlgorithmInformation-2009 -- in [FRC5911] { iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-algorithmInformation-02(58) } ; -- -- CEK-HKDF-SHA256 Algorithm -- id-alg-cek-hkdf-sha256 OBJECT IDENTIFIER ::= { TBD1 } ContentEncryptionAlgorithmIdentifier ::= AlgorithmIdentifier{CONTENT-ENCRYPTION, { ... } } cea-CEKHKDFSHA256 CONTENT-ENCRYPTION ::= { IDENTIFIER id-alg-cek-hkdf-sha256 PARAMS TYPE ContentEncryptionAlgorithmIdentifier ARE required SMIME-CAPS { IDENTIFIED BY id-alg-cek-hkdf-sha256 } } -- -- S/MIIME Capability for CEK-HKDF-SHA256 Algorithm -- SMimeCaps SMIME-CAPS ::= { cap-CMSCEKHKDFSHA256, ... } cap-CMSCEKHKDFSHA256 SMIME-CAPS ::= { -- No value -- IDENTIFIED BY id-alg-cek-hkdf-sha256 } END <CODE ENDS>¶
This appendix provides two test vectores for the CMS_CEK_HKDF_SHA256 function.¶
This test vector uses includes an AlgorithmIdentifier for
AES-128-GCM.¶
IKM = c702e7d0a9e064b09ba55245fb733cf3 The AES-128-CGM AlgorithmIdentifier: algorithm=2.16.840.1.101.3.4.1.6 parameters=GCMParameters: aes-nonce=0x5c79058ba2f43447639d29e2 aes-ICVlen is ommited; it indicates the DEFAULT of 12 DER-encoded AlgorithmIdentifier: 301b0609608648016503040106300e040c5c79058ba2f43447639d29e2 OKM = 2124ffb29fac4e0fbbc7d5d87492bff3¶
This test vector uses includes an AlgorithmIdentifier for
AES-128-CBC.¶
IKM = c702e7d0a9e064b09ba55245fb733cf3 The AES-128-CBC AlgorithmIdentifier: algorithm=2.16.840.1.101.3.4.1.2 parameters=AES-IV=0x651f722ffd512c52fe072e507d72b377 DER-encoded AlgorithmIdentifier: 301d06096086480165030401020410651f722ffd512c52fe072e507d72b377 OKM = 9cd102c52f1e19ece8729b35bfeceb50¶