| Internet-Draft | BGP SR Policy for NRP | January 2023 |
| Dong, et al. | Expires 4 August 2023 | [Page] |
Segment Routing (SR) Policy is a set of candidate paths, each consisting of one or more segment lists and the associated information. The header of a packet steered in an SR Policy is augmented with an ordered list of segments associated with that SR Policy. A Network Resource Partition (NRP) is a subset of network resources allocated in the underlay network which can be used to support one or a group of IETF network slice services.¶
In networks where there are multiple NRPs, an SR Policy may be associated with a particular NRP. The association between SR Policy and NRP needs to be specified, so that for service traffic which is steered into the SR Policy, the header of the packets can be augmented with the information associated with the NRP. An SR Policy candidate path can be distributed using BGP SR Policy. This document defines the extensions to BGP SR policy to specify the NRP which the SR Policy candidate path is associated with.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 4 August 2023.¶
Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
The concept of Segment Routing (SR) policy is defined in [RFC9256]. An SR Policy is a set of candidate paths, each consisting of one or more segment lists. The head end of an SR Policy may learn multiple candidate paths for an SR Policy. The header of a packet steered in an SR Policy is augmented with an ordered list of segments associated with that SR Policy. The BGP extensions to distribute SR Policy candidate paths is defined in [I-D.ietf-idr-segment-routing-te-policy].¶
[I-D.ietf-teas-ietf-network-slices] introduces the concept and the characteristics of IETF network slice, and describes a general framework for IETF network slice management and operation. It also introduces the concept Network Resource Partition (NRP), which is a subset of the resources and associated policies in the underlay network. IETF network slice can be realized by mapping one or more connectivity constructs to an NRP. [I-D.ietf-teas-enhanced-vpn] describes the framework and the candidate component technologies for providing enhanced VPN (VPN+) services based on VPN and Traffic Engineering (TE) technologies. Enhanced VPN (VPN+) can be used for the realization of IETF network slices. In the context of network slicing, an NRP is considered as an instantiation of the VTN as defined in [I-D.ietf-teas-enhanced-vpn].¶
As described in [I-D.ietf-teas-nrp-scalability], one scalable data plane approach to support network slicing is to carry a dedicated NRP ID in the data packet to identify the NRP the packet belongs to, so that the packet can be processed and forwarded using the subset of network resources allocated to the NRP.¶
In networks where there are multiple NRPs, an SR Policy may be associated with a particular NRP. The association between SR Policy and NRP needs to be specified, so that for service traffic which is steered into the SR Policy, the header of the packets can be augmented with the information associated with the NRP. An SR Policy candidate path can be distributed using BGP SR Policy. This document defines the extensions to BGP SR policy to specify the NRP which the SR Policy candidate path is associated with.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
In order to specify the NRP the candidate path of SR policy is associated with, a new sub-TLV called "NRP sub-TLV" is defined in the BGP Tunnel Encapsulation Attribute [RFC9012]. The NRP sub-TLV can be carried in the BGP Tunnel Encapsulation Attribute with the tunnel type set to SR Policy.¶
The NRP sub-TLV is optional and MUST NOT appear more than once for one SR Policy candidate path. If the NRP sub-TLV appears more than once, the associated BGP SR Policy NLRI is considered malformed and the "treat-as-withdraw" strategy of [RFC7606] is applied.¶
The NRP sub-TLV has the following format:¶
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Length | Flags | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| NRP ID (4 octets) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Figure 1. NRP Sub-TLV¶
where:¶
The encoding structure of BGP SR Policy with the NRP sub-TLV is expressed as below:¶
SR Policy SAFI NLRI: <Distinguisher, Policy-Color, Endpoint>
Attributes:
Tunnel Encaps Attribute (23)
Tunnel Type: SR Policy (15)
Binding SID
SRv6 Binding SID
Preference
Priority
Policy Name
Policy Candidate Path Name
Explicit NULL Label Policy (ENLP)
NRP
Segment List
Weight
Segment
Segment
...
...
Figure 2. SR Policy Encoding with NRP sub-TLV¶
When a candidate path of SR Policy is instantiated with a specific NRP, the originating node of SR Policy SHOULD include the NRP sub-TLV in the BGP Tunnel Encapsulation Attribute of the BGP SR Policy. The setting of other fields and attributes in BGP SR Policy SHOULD follow the mechanism as defined in [I-D.ietf-idr-segment-routing-te-policy].¶
On reception of an SR Policy NLRI, a BGP speaker determines if it is acceptable and usable according to the rules defined in Section 4.2 of [I-D.ietf-idr-segment-routing-te-policy]. If the SR Policy candidate path selected as the best candidate path is associated with an NRP, the headend node of the SR Policy SHOULD encapsulate the NRP ID and the segment list of the selected candidate path in the header of packets which are steered to the SR Policy. For SR Policy with IPv6 data plane, the approach to encapsulate the NRP ID in IPv6 Hop-by-Hop Options header is defined in [I-D.ietf-6man-enhanced-vpn-vtn-id]. For SR Policy with MPLS data plane, one approach to encapsulate the NRP ID to the packet is defined in [I-D.li-mpls-enhanced-vpn-vtn-id].¶
Although the proposed mechanism allows that different candidate paths in one SR policy be associated with different NRPs, in normal network scenarios it is considered that the association between an SR Policy and NRP is consistent, in such case all candidate paths of one SR policy SHOULD be associated with the same NRP.¶
The security considerations of BGP [RFC4271] and BGP SR policy [I-D.ietf-idr-segment-routing-te-policy] apply to this document.¶
IANA has assigned the sub-TLV type as defined in Section 2 from "BGP Tunnel Encapsulation Attribute sub-TLVs" registry.¶
Value Description Reference
----------------------------------------------------
123 NRP This document
¶
The authors would like to thank Guoqi Xu, Lei Bao, Haibo Wang and Shunwan Zhuang for their review and discussion of this document.¶